Fix MuJoCo margin/gap conversion#1785
Merged
adenzler-nvidia merged 14 commits intoFeb 26, 2026
Merged
Conversation
Apply correct Newton<->MuJoCo conversion for margin and gap: Newton -> MuJoCo: geom_margin = shape_margin + shape_gap MuJoCo -> Newton: shape_margin = mj_margin - mj_gap Replace the geom_gap custom attribute with Newton's built-in shape_gap. Parse MJCF gap directly into ShapeConfig.gap. Add MuJoCo->Newton conversion in USD import when mjc:margin is authored.
Set gap=0.0 on test shapes to avoid inflated contact detection distance from default shape_gap. Remove nacon==0 assertion since nacon counts speculative (inactive) contacts that don't affect physics. The physics assertions (height drop, downward velocity) properly verify that the collision geometry moved with the mocap body.
Contributor
|
Note Reviews pausedIt looks like this branch is under active development. To avoid overwhelming you with review comments due to an influx of new commits, CodeRabbit has automatically paused this review. You can configure this behavior by changing the Use the following commands to manage reviews:
Use the checkboxes below for quick actions:
📝 WalkthroughWalkthroughReplaces per-geom Changes
Sequence DiagramssequenceDiagram
participant MJC as MuJoCo Model<br/>(mjc_margin, mjc_gap)
participant Importer as MJCF/USD Importer
participant Newton as Newton Shape<br/>(shape_margin, shape_gap)
participant Solver as MuJoCo Solver<br/>Kernel
participant MuJoCo as MuJoCo Geom<br/>(geom_margin, geom_gap)
rect rgba(255, 200, 100, 0.5)
Note over MJC,Importer: Import Phase
MJC->>Importer: read mjc_margin, mjc_gap
Importer->>Importer: compute newton_margin = mjc_margin - mjc_gap
Importer->>Newton: set shape_margin, shape_gap
end
rect rgba(100, 200, 255, 0.5)
Note over Newton,Solver: Runtime Update Phase
Newton->>Solver: pass shape_margin, shape_gap
Solver->>Solver: geom_gap = shape_gap
Solver->>Solver: geom_margin = shape_margin + shape_gap
Solver->>MuJoCo: write geom_margin, geom_gap
end
Estimated code review effort🎯 4 (Complex) | ⏱️ ~60 minutes Possibly related issues
Possibly related PRs
Suggested reviewers
🚥 Pre-merge checks | ✅ 3✅ Passed checks (3 passed)
✏️ Tip: You can configure your own custom pre-merge checks in the settings. ✨ Finishing Touches🧪 Generate unit tests (beta)
Thanks for using CodeRabbit! It's free for OSS, and your support helps us grow. If you like it, consider giving us a shout-out. Comment |
- Add tests for combined margin+gap conversion in both MJCF and USD import paths, covering the core formula newton_margin = mj_margin - mj_gap with non-zero gap - Add USD test for authored mjc:margin with and without mjc:gap - Guard against None from USD attribute Get() on blocked attributes - Warn when conversion produces negative margin (mj_gap > mj_margin) - Fix misleading docstrings and rename test methods to reflect that gap is now stored in shape_gap rather than geom_gap custom attribute - Clarify schemas.py comment to note raw MuJoCo values with no conversion at the schema level - Document MJCF gap-only parsing behavior
2a341ff to
7196ed5
Compare
Contributor
There was a problem hiding this comment.
Actionable comments posted: 1
🧹 Nitpick comments (2)
newton/_src/utils/import_mjcf.py (1)
662-682: LGTM — margin/gap conversion is correct; one minor naming nit in the warning message.The conversion logic (
newton_margin = mj_margin - mj_gap), the guard against negative results, and the conditional assignment toshape_cfg.gapall look correct. The edge-case comment (lines 665–667) adequately explains the "gap present, margin absent" behaviour.The only nit: line 673 re-derives the geom name with
geom_attrib.get("name", "<unnamed>")whilegeom_name(computed at line 592 with a richer auto-generated fallback that includesbody_nameandgeo_count) is already in scope. Using it directly is both simpler and more informative.🔧 Suggested simplification
- geom_name_val = geom_attrib.get("name", "<unnamed>") - warnings.warn( - f"Geom '{geom_name_val}': MuJoCo gap ({mj_gap}) exceeds margin ({mj_margin}), " + warnings.warn( + f"Geom '{geom_name}': MuJoCo gap ({mj_gap}) exceeds margin ({mj_margin}), "🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed. In `@newton/_src/utils/import_mjcf.py` around lines 662 - 682, The warning recomputes the geometry name via geom_attrib.get("name", "<unnamed>") even though a richer fallback name is already available in the local variable geom_name (computed near the top of the function); update the warning in the margin/gap block to use the existing geom_name variable instead of re-deriving it so the message is more informative and consistent (modify the warnings.warn call in the margin handling code to reference geom_name while keeping the same message format and stacklevel).newton/tests/test_import_usd.py (1)
2099-2100: Prefer deterministic path-based assertions overany(...)scans.The
any(...)checks can produce false positives if additional shapes are added later with matching defaults. Asserting bypath_shape_mapkeeps the test precise and future-proof.♻️ Suggested refactor
- builder.add_usd(stage, schema_resolvers=[SchemaResolverMjc()]) + import_result = builder.add_usd(stage, schema_resolvers=[SchemaResolverMjc()]) model = builder.finalize() @@ - found_explicit_1 = any(floats_match(shape_gap[i], expected_explicit_1) for i in range(model.shape_count)) - found_explicit_2 = any(floats_match(shape_gap[i], expected_explicit_2) for i in range(model.shape_count)) - - self.assertTrue(found_explicit_1, f"Expected gap {expected_explicit_1} not found in model") - self.assertTrue(found_explicit_2, f"Expected gap {expected_explicit_2} not found in model") + idx_1 = import_result["path_shape_map"]["/Body1/Collision1"] + idx_3 = import_result["path_shape_map"]["/Body3/Collision3"] + self.assertTrue(floats_match(shape_gap[idx_1], expected_explicit_1)) + self.assertTrue(floats_match(shape_gap[idx_3], expected_explicit_2)) @@ - builder.add_usd(stage, schema_resolvers=[SchemaResolverMjc()]) + import_result = builder.add_usd(stage, schema_resolvers=[SchemaResolverMjc()]) model = builder.finalize() @@ - found_combined = any( - abs(float(shape_margin[i]) - 0.3) < 1e-4 and abs(float(shape_gap[i]) - 0.2) < 1e-4 - for i in range(model.shape_count) - ) - self.assertTrue(found_combined, "Expected margin=0.3, gap=0.2 from combined conversion") + idx_1 = import_result["path_shape_map"]["/Body1/Collision1"] + self.assertAlmostEqual(float(shape_margin[idx_1]), 0.3, places=4) + self.assertAlmostEqual(float(shape_gap[idx_1]), 0.2, places=4) @@ - found_margin_only = any( - abs(float(shape_margin[i]) - 0.4) < 1e-4 and abs(float(shape_gap[i])) < 1e-4 - for i in range(model.shape_count) - ) - self.assertTrue(found_margin_only, "Expected margin=0.4 with gap=0.0 when only margin authored") + idx_2 = import_result["path_shape_map"]["/Body2/Collision2"] + self.assertAlmostEqual(float(shape_margin[idx_2]), 0.4, places=4) + self.assertAlmostEqual(float(shape_gap[idx_2]), 0.0, places=4)Also applies to: 2153-2165
🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed. In `@newton/tests/test_import_usd.py` around lines 2099 - 2100, Replace the non-deterministic any(...) scans (found_explicit_1 / found_explicit_2 using floats_match over shape_gap and model.shape_count) with direct, path-keyed assertions against path_shape_map: look up the expected shape gaps by their USD paths in path_shape_map and assert floats_match(path_shape_map[that_path], expected_explicit_1) (and similarly for expected_explicit_2); apply the same refactor to the other occurrences around lines 2153-2165 so tests assert specific path entries rather than scanning all shapes.
🤖 Prompt for all review comments with AI agents
Verify each finding against the current code and only fix it if needed.
Inline comments:
In `@newton/_src/utils/import_usd.py`:
- Around line 1885-1900: The loop over R.resolvers that checks r.get_value(prim,
PrimType.SHAPE, "margin") should subtract the MuJoCo resolver's own gap value
instead of the resolved gap_cfg; update the block where r.name == "mjc" to fetch
the MuJoCo gap from the same resolver (e.g., call r.get_value(prim,
PrimType.SHAPE, "gap") and default to 0.0 if None) and use that local mjc_gap
when computing margin_val = margin_val - mjc_gap, keeping the existing warning
and break behavior intact.
---
Nitpick comments:
In `@newton/_src/utils/import_mjcf.py`:
- Around line 662-682: The warning recomputes the geometry name via
geom_attrib.get("name", "<unnamed>") even though a richer fallback name is
already available in the local variable geom_name (computed near the top of the
function); update the warning in the margin/gap block to use the existing
geom_name variable instead of re-deriving it so the message is more informative
and consistent (modify the warnings.warn call in the margin handling code to
reference geom_name while keeping the same message format and stacklevel).
In `@newton/tests/test_import_usd.py`:
- Around line 2099-2100: Replace the non-deterministic any(...) scans
(found_explicit_1 / found_explicit_2 using floats_match over shape_gap and
model.shape_count) with direct, path-keyed assertions against path_shape_map:
look up the expected shape gaps by their USD paths in path_shape_map and assert
floats_match(path_shape_map[that_path], expected_explicit_1) (and similarly for
expected_explicit_2); apply the same refactor to the other occurrences around
lines 2153-2165 so tests assert specific path entries rather than scanning all
shapes.
ℹ️ Review info
Configuration used: Path: .coderabbit.yml
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (8)
newton/_src/solvers/mujoco/kernels.pynewton/_src/solvers/mujoco/solver_mujoco.pynewton/_src/usd/schemas.pynewton/_src/utils/import_mjcf.pynewton/_src/utils/import_usd.pynewton/tests/test_import_mjcf.pynewton/tests/test_import_usd.pynewton/tests/test_mujoco_solver.py
The margin/gap conversion change correctly forwards shape_gap to MuJoCo's geom_gap (previously a separate custom attribute with default 0.0). Tests that create shapes via ModelBuilder without explicit gap now inherit builder.rigid_gap=0.1, which changes MuJoCo's collision detection envelope and produces different contact topologies. Set gap=0.0 explicitly in both test scenarios so MuJoCo collision behavior matches the pre-conversion baseline.
Codecov Report❌ Patch coverage is
📢 Thoughts on this report? Let us know! |
Member
Author
|
needs another MjWarp hotfix to get the tests green - somewhat serious issue with convex collisions and nonzero margin. |
4 tasks
Member
Author
|
google-deepmind/mujoco_warp#1188 needed for this. |
MuJoCo CCD disables multi-contact generation when geom_margin > 0. With Newton's default rigid_gap=0.1, geom_margin becomes 0.1, reducing box-box contacts from 4 per interface to 1, which prevents proper force distribution in stacking scenarios.
Move MuJoCo margin-gap conversion into the schema resolver using a usd_value_getter (_mjc_margin_from_prim), following the existing _physx_gap_from_prim pattern. This removes the manual conversion loop from import_usd.py. Fix geom_name in MJCF warning to use the richer fallback name. Remove unnecessary register_custom_attributes calls from gap and margin tests. Add geom_gap assertions to test_geom_margin_from_shape_margin and add a new MJCF->Newton->MuJoCo roundtrip test.
Contributor
There was a problem hiding this comment.
♻️ Duplicate comments (1)
newton/tests/test_import_mjcf.py (1)
3224-3227:⚠️ Potential issue | 🟠 MajorUse MuJoCo’s omitted-
gapdefault (0.0) in these assertions.These checks currently key off
builder.rigid_gap, which can encode the wrong importer contract and mask margin/gap conversion regressions.Suggested test expectation fix
@@ - 1: builder.rigid_gap, # default gap when not specified in MJCF + 1: 0.0, # MuJoCo default gap when omitted @@ - # geom "margin_only": margin=0.3, gap absent -> newton_margin=0.3, gap=default + # geom "margin_only": margin=0.3, gap absent -> newton_margin=0.3, newton_gap=0.0 self.assertAlmostEqual(float(shape_margin[1]), 0.3, places=5) - self.assertAlmostEqual(float(shape_gap[1]), builder.rigid_gap, places=5) + self.assertAlmostEqual(float(shape_gap[1]), 0.0, places=5) @@ - # geom "neither": both absent -> defaults + # geom "neither": both absent -> defaults (margin=0.0, gap=0.0) self.assertAlmostEqual(float(shape_margin[3]), 0.0, places=5) - self.assertAlmostEqual(float(shape_gap[3]), builder.rigid_gap, places=5) + self.assertAlmostEqual(float(shape_gap[3]), 0.0, places=5) @@ - # geom "margin_only": margin=0.3, gap unset (falls back to builder default) - # geom_margin = shape_margin + shape_gap = 0.3 + builder.rigid_gap + # geom "margin_only": margin=0.3, gap unset (MuJoCo default gap=0.0) + # geom_margin = shape_margin + shape_gap = 0.3 + 0.0In the MuJoCo XML reference for `<geom>`, what is the documented default value of `gap` when the attribute is omitted?Also applies to: 3274-3277, 3282-3284, 3327-3329
🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed. In `@newton/tests/test_import_mjcf.py` around lines 3224 - 3227, The assertions in newton/tests/test_import_mjcf.py currently use builder.rigid_gap for omitted-`gap` values which hides incorrect importer behavior; update the expected_values maps (the one shown with keys 0,1,2 and the similar maps at the other referenced ranges) to use MuJoCo's documented default 0.0 instead of builder.rigid_gap so the test explicitly checks for an omitted-attribute gap of 0.0; search for expected_values and any assertions referencing builder.rigid_gap in this test file and replace those entries with 0.0 to verify the importer applies MuJoCo's default rather than a builder-level fallback.
🤖 Prompt for all review comments with AI agents
Verify each finding against the current code and only fix it if needed.
Duplicate comments:
In `@newton/tests/test_import_mjcf.py`:
- Around line 3224-3227: The assertions in newton/tests/test_import_mjcf.py
currently use builder.rigid_gap for omitted-`gap` values which hides incorrect
importer behavior; update the expected_values maps (the one shown with keys
0,1,2 and the similar maps at the other referenced ranges) to use MuJoCo's
documented default 0.0 instead of builder.rigid_gap so the test explicitly
checks for an omitted-attribute gap of 0.0; search for expected_values and any
assertions referencing builder.rigid_gap in this test file and replace those
entries with 0.0 to verify the importer applies MuJoCo's default rather than a
builder-level fallback.
ℹ️ Review info
Configuration used: Path: .coderabbit.yml
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (5)
newton/_src/usd/schemas.pynewton/_src/utils/import_mjcf.pynewton/_src/utils/import_usd.pynewton/tests/test_import_mjcf.pynewton/tests/test_mujoco_solver.py
gyeomannvidia
previously approved these changes
Feb 26, 2026
The test previously sampled contact forces at a single simulation step, which is fragile because bodies physically oscillate between contact and no-contact states near equilibrium. This caused flaky failures where the measured z-force could be 0 or ~2x expected depending on which phase the final step landed on. Average forces over the last 10 steps to smooth out per-step oscillation and reliably recover the expected steady-state contact forces within the existing 1% tolerance.
…into adenzler/fix-margin-gap-conversion
The margin/gap conversion adds shape_gap to geom_margin in the MuJoCo solver kernel. When gap is not explicitly set, it defaults to rigid_gap=0.1, inflating the effective MuJoCo margin and causing broadphase overflow and simulation instability. Set gap=0.0 on the default shape config for the affected examples.
Same fix as the other examples: prevent rigid_gap=0.1 default from inflating MuJoCo geom_margin, which causes CCD iteration overflows.
gyeomannvidia
previously approved these changes
Feb 26, 2026
Matches the allegro example which also sets gap to 0.0, ensuring the benchmark uses consistent contact parameters.
gyeomannvidia
approved these changes
Feb 26, 2026
6 tasks
vastsoun
added a commit
to vastsoun/newton
that referenced
this pull request
Mar 3, 2026
* [Warp Raytrace] Added device parameter (newton-physics#1544) * [Warp Raytrace] Added device parameter to previously overlooked call (newton-physics#1545) * SolverMuJoCo: Fix tolerance clamping in update_solver_options_kernel (newton-physics#1546) * Change default shape_ke to align with MuJoCo, parse geom solref from MJCF for contact stiffness/damping (newton-physics#1491) Signed-off-by: Alain Denzler <adenzler@nvidia.com> * Fix log_shapes broadcasting for length-1 warp arrays (newton-physics#1550) * Fix XPBD restitution particle index (newton-physics#1557) * Out-of-Bound memory read in example_diffsim_bear newton-physics#1386 (newton-physics#1533) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Add versioned documentation deployment to GitHub Pages (newton-physics#1560) * Fix broken documentation links after versioned docs deployment (newton-physics#1566) * VBD New Features (newton-physics#1479) Co-authored-by: Claude Sonnet 4.5 <noreply@anthropic.com> * Add banners to membership verification workflow steps (newton-physics#1569) * Support cable junctions (newton-physics#1519) Signed-off-by: JC <jumyungc@nvidia.com> * Rename parameter I to inertia newton-physics#1543 (newton-physics#1551) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Fix example_robot_anymal_c_walk.py (newton-physics#1574) * Change everywhere linesearch to iterative (newton-physics#1573) * Remove standard collision pipeline (newton-physics#1538) * USD Plumbing MJC solver attributes through resolver and custom attribute framework (newton-physics#1463) Signed-off-by: Milad Rakhsha <mrakhsha@nvidia.com> Signed-off-by: Milad-Rakhsha-NV <167464435+Milad-Rakhsha-NV@users.noreply.github.com> Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> * Fix child shape filtering (newton-physics#1559) * Fix ViewerRerun ignoring hidden parameter in log_mesh and log_instances (newton-physics#1555) * Make NxN and SAP broad phase respect filtered pairs (newton-physics#1554) * Add --quiet flag to examples to suppress Warp messages (newton-physics#1585) * Defer resolution of MESH_MAXHULLVERT default in importers (newton-physics#1587) * Fix TypeError when finalizing SDF geometry with device kwarg (newton-physics#1586) * Make MESH_MAXHULLVERT a static class attribute Mesh.MAX_HULL_VERTICES. (newton-physics#1598) * Significant non-determinism in unified collision pipeline for anymal_c_walking example newton-physics#1505 (newton-physics#1588) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Add test for non-contiguous case (newton-physics#1549) * Fix nightly Warp CI to resolve pre-release builds (newton-physics#1606) * Verify default class and value handling (newton-physics#1556) * SolverMuJoCo: Expand geom_margin to avoid OOB read with heterogeneous worlds (newton-physics#1607) * Fix bug in control clear method (newton-physics#1602) * Enable Use of Newton IK in Lab newton-physics#662 (newton-physics#1539) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Fix import of non-articulated joints (newton-physics#1535) * Deduplicate _process_joint_custom_attributes frequency handling (newton-physics#1584) * Add CI check for stale API docs and fix local build warnings (newton-physics#1570) * Update Pillow 12.0.0 to 12.1.1 (newton-physics#1612) * Prepare handling of mimic constraints in Newton (newton-physics#1523) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Support floating, base_joint and parent_body arguments for importers (newton-physics#1498) * Fix contact buffer memory overestimation (newton-physics#1614) * Configure banned-module-level-imports for ruff (newton-physics#1583) * Explicit `Contacts` instantiation with `Model.contacts()` and `CollisionPipeline.contacts()` (newton-physics#1445) * Fix the quadruped benchmark regression (newton-physics#1615) * Change default ignore_inertial_definitions from True to False (newton-physics#1537) * Finalize the Recording API (newton-physics#1600) * SolverMuJoCo: Fix ccd_iterations default (newton-physics#1631) * update gitignore to ignore Claude Code sandbox files (newton-physics#1628) * Add mimic joint support to SolverMuJoCo (newton-physics#1627) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Add --no-cache-clear flag to test runner (newton-physics#1629) * Update MuJoCo and MuJoCo Warp to 3.5.0 release (newton-physics#1633) * Improve inertia parsing from USD (newton-physics#1605) Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com> * Remove standalone .typos.toml in favor of pyproject.toml config (newton-physics#1642) * Heightfield support newton-physics#1189 (newton-physics#1547) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Example_robot_policy: Replace ValueError with clean error for missing PhysX policy (newton-physics#1636) Co-authored-by: Viktor Reutskyy <33062116+vreutskyy@users.noreply.github.com> * Avoid unnecessary inflation of the contact reduction voxel aabb (newton-physics#1650) * Rename num_worlds to world_count (newton-physics#1634) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Support parsing autolimits from MJCF (newton-physics#1651) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Fix particle-shape restitution ignoring body velocity (newton-physics#1273) (newton-physics#1580) * Add overflow warnings for narrow-phase collision buffers (newton-physics#1643) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Documentation: add units to model/state docstrings (newton-physics#1649) * fix(viewer): add missing JointType.BALL support to contact line kernel (newton-physics#1640) * Make terrain mesh visual-only in anymal C walking example (newton-physics#1660) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Fix initialization of collider state in MPM finite difference mode (newton-physics#1652) * docs: document ModelBuilder.default_shape_cfg (newton-physics#1662) * Finalize the collision API (newton-physics#1581) * Remove hardcoded subnet ID from AWS workflow (newton-physics#1664) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Attempt to fix AWS config (newton-physics#1666) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Update AWS workflows to g7e.2xlarge with multi-AZ failover (newton-physics#1669) * fix(viewer-usd): disambiguate log_points colors for N=3 warp arrays (newton-physics#1661) * Viewer gl optimizations (newton-physics#1656) Signed-off-by: Miles Macklin <mmacklin@nvidia.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> Co-authored-by: Eric Heiden <eheiden@nvidia.com> * docs: add articulation workflow guidance and regression check (newton-physics#1663) * fix(examples): propagate IK solution to model state in Franka example (newton-physics#1637) * fix(deps,docs): bump nbconvert to 7.17.0 and fix ArticulationView doctest (newton-physics#1670) * Cleanup and improve some example (newton-physics#1625) Signed-off-by: adenzler-nvidia <adenzler@nvidia.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> * Handle zero-mass bodies and flip ensure_nonstatic_links default (newton-physics#1635) * Additional testing for ArticulationView (newton-physics#1527) Co-authored-by: Eric Heiden <eheiden@nvidia.com> * Update warp-lang nightly to 1.12.0.dev20260217 (newton-physics#1677) * Change default friction coefficients to match MuJoCo (newton-physics#1681) * Refactor mesh creation functions (newton-physics#1654) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Parse joint frictionloss from MJCF (newton-physics#1680) * Fix free joint body_pos and add ref/qpos0 support for MuJoCo solver (newton-physics#1645) * Fix root shapes in ArticulationView with fixed base (newton-physics#1639) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Use model collision methods and remove `create_collision_pipeline` from examples (newton-physics#1648) Co-authored-by: nvtw <110816143+nvtw@users.noreply.github.com> * Fix XPBD apply_joint_forces ignoring child joint transform (newton-physics#1582) * Adjust SDF API (newton-physics#1644) Co-authored-by: Eric Heiden <eheiden@nvidia.com> * Optimize test suite runtime (~18% faster) (newton-physics#1689) * Remove ensure_nonstatic_links option from importers (newton-physics#1682) Signed-off-by: adenzler-nvidia <adenzler@nvidia.com> * SolverMuJoCo: Add geom_margin support, align thickness default with MuJoCo and schemas (newton-physics#1653) * refactor: privatize non-public solver internals (newton-physics#1683) * Fix option parsing with multiple <option> elements from includes (newton-physics#1692) * Bump warp-lang nightly and newton-usd-schemas (newton-physics#1693) * Get rid of tkinter dependency (newton-physics#1676) * Fix SDF example contact buffer overflow (newton-physics#1695) * Fix implicit biastype for position/velocity actuator shortcuts (newton-physics#1678) * Fix include processor to respect meshdir/texturedir (newton-physics#1685) * Reduce cold-cache Warp compile time for geometry modules (newton-physics#1618) Co-authored-by: Cursor <cursoragent@cursor.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> * Fix xyzw-to-wxyz quaternion conversion in body inertia kernel (newton-physics#1694) * Rename key to label and add hierarchical labels (newton-physics#1592) (newton-physics#1632) * Expose geometry SDF helpers on public API (newton-physics#1684) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Improve custom frequency handling from USD, parse MuJoCo actuators and tendons (newton-physics#1510) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Collapse fixed joints with non articulated bodies (newton-physics#1608) * Fix renaming joint_key -> joint_label (newton-physics#1700) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Bump .python-version from 3.11 to 3.12 (newton-physics#1702) * Replace CITATION.md with CITATION.cff (newton-physics#1706) * Respect MJCF contype=conaffinity=0 via collision_group=0 (newton-physics#1703) * Make ViewerUSD reuse existing USD layers for the same output path (newton-physics#1704) Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Remove dead up-axis conversion from MuJoCo solver (newton-physics#1707) * Skip IK cube stacking example test (newton-physics#1713) * Fix global pairs (world=-1) not exported to MuJoCo spec (newton-physics#1705) * Reduce the memory consumption of hydroelastic contacts (newton-physics#1609) * Fix flakiness cube stacking (newton-physics#1714) * Fix collision shapes not toggleable in viewer UI (newton-physics#1715) * Fix softbody examples table layout in README (newton-physics#1716) * Standardize sensor APIs: label matching, keyword args, and update() method naming (newton-physics#1665) * Fix intermittent crash in parallel test runner from Manager proxy race (newton-physics#1721) * Clean up inertia.py function arguments to match Mesh.create_* API (newton-physics#1719) * Reduce default test runner verbosity (newton-physics#1723) * Add menagerie comparison tests for SolverMuJoCo (newton-physics#1720) Signed-off-by: Alain Denzler <adenzler@nvidia.com> Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> Co-authored-by: Viktor Reutskyy <vreutskyy@nvidia.com> Co-authored-by: Viktor Reutskyy <33062116+vreutskyy@users.noreply.github.com> * Add spatial tendon support for MuJoCo solver (newton-physics#1687) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Expose qfrc_actuator from mujoco (newton-physics#1698) * Skip non-MODEL custom attributes in finalize validation (newton-physics#1734) * Resolve inheritrange for position actuators in MJCF parser (newton-physics#1727) * Support dampratio for position/velocity actuator shortcuts (newton-physics#1722) * Limit concurrency to 1 (newton-physics#1736) * Add a helper method for checking applied usd (newton-physics#1731) * Enhance playback URL handling in ViewerViser (newton-physics#1742) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Removed RenderShapeType (newton-physics#1748) * Override only MassAPI attributes that have been authored (newton-physics#1688) * Integration of newton-actuators (newton-physics#1342) Signed-off-by: jvonmuralt <jvonmuralt@nvidia.com> * Fix ArticulationView crash with fixed-joint-only articulations (newton-physics#1726) * Improve retrieval of Jupyter base URL in ViewerViser (newton-physics#1750) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Disable dynamics testing for UR5e and Apollo tests to avoid CI flakiness (newton-physics#1755) * Margin and Gap rename (newton-physics#1732) * Vbd Demos Fixing (newton-physics#1740) * Fix ViewerViser.log_lines method (newton-physics#1764) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Update warp-lang dependency to 1.12.0rc1 (newton-physics#1763) * Fix fromto capsule/cylinder orientation in MJCF parser (newton-physics#1741) * fix: multi-world particle BVH indexing (newton-physics#1641) Co-authored-by: Eric Heiden <eheiden@nvidia.com> * Clean up unused and internal-only kwargs in SolverMuJoCo (newton-physics#1766) * Parsing of the mimic joint and contact gap/margin from newton schemas (newton-physics#1690) Signed-off-by: Milad Rakhsha <mrakhsha@nvidia.com> * API Refactor v2 (newton-physics#1749) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Support explicit geom mass attributes in MJCF (newton-physics#1744) * Bump flask and werkzeug in lockfile for security (newton-physics#1769) Co-authored-by: Cursor <cursoragent@cursor.com> * Split MJCF worldbody root bodies into separate articulations (newton-physics#1754) * Expose VBD rigid contact forces for solver coupling (newton-physics#1745) Signed-off-by: JC <jumyungc@nvidia.com> * Add MJCF ellipsoid geom import and regression test (newton-physics#1772) Co-authored-by: Cursor <cursoragent@cursor.com> * Weld equality constraints parsed from mjcf are given Nan as the default value of torquescale. The correct default should be 1.0 (newton-physics#1760) * Improve picking accuracy and stability (newton-physics#1712) * Franka cloth demo improvement (newton-physics#1765) * Support computing sensing object transforms & API cleanup (newton-physics#1759) * Remove threading workaround (newton-physics#1751) * [Warp Raytrace] Consolidated ray intersect functions, renamed Options to Config (newton-physics#1767) * Improve README example gallery for PyPI compatibility (newton-physics#1776) * Fix issue with mesh in rerun viewer (newton-physics#1768) * Add PhysxMimicJointAPI parsing to USD importer (newton-physics#1735) * Move some math functions to Warp (newton-physics#1717) Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Add test to ensure MJCF xform argument is relative (newton-physics#1777) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Emit diaginertia instead of fullinertia for diagonal body inertia (newton-physics#1780) * Change default joint armature from 0.01 to 0 (newton-physics#1782) * Fix default kp/kv for position and velocity actuators (newton-physics#1786) * Lock body inertia after explicit MJCF <inertial> element (newton-physics#1784) * Fix for MJCF actuator custom attributes (newton-physics#1783) * Bump version to 0.2.3 Prepare the package metadata for the v0.2.3 release tag. * Fix ViewerRerun rendering of instances from hidden meshes (newton-physics#1788) * API cleanup (newton-physics#1789) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * BODY actuator target name bypasses body name de-duplication in SolverMuJoCo (newton-physics#1729) * Use default density for visual geoms in MJCF import (newton-physics#1781) * Fix GL viewer crash on Wayland (newton-physics#1793) * Make USD xform parameter control absolute articulation placement (newton-physics#1771) * Fix CUDA context corruption in SDF implementation (newton-physics#1792) * Bump mujoco-warp dependency to 3.5.0.2 (newton-physics#1779) * Fix MuJoCo margin/gap conversion (newton-physics#1785) * Bump version to 1.1.0.dev0 (newton-physics#1798) * Missing unittest.main added back to test_import_mjcf.py. Helps with F5 debugging in VS Code. (newton-physics#1796) * Improve H1 example (newton-physics#1801) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Fix ViewerViser.set_camera() (newton-physics#1805) * Rename examples to follow prefix-first naming convention (newton-physics#1802) * Improve MuJoCo actuator domain randomization (newton-physics#1773) * Restore in_cup test in hydro example (newton-physics#1775) * Fix `newton.geometry` imports and change of Mesh maxhullverts global constant * Adapt to having both margin and gap arrays for each geom/shape * Fix for newton.geometry API changes in primitive/narrowphase.py * Fix removal of `BroadPhaseMode` IntEnum and revert to newton-sytle string literals * WIP: Adapt geometry/unified.py to fix breaking changes to `newton.geometry` API * First pass of API adjustments * Patch more gaps (with respect to margin and gap renaming) * GeoType.SDF was removed - reflect that in Kamino * Introduce CoM position offsets w.r.t body frame and operations to convert between body CoM state and generic local body-fixed reference frames. * Add caching of per-entity labels/names/keys in the Model subcontainers * Remove SDF shape wrapper since it's now internal to mesh handling in CD pipelines * Fix USD test assets * Add Newton <--> Kamino joint type conversion operations and per-space default limit constants * Add some cleanup to geometry and unified CD + UTs * Add Newton <--> Kamino shape type conversion operations * Apply new default joint coord limit constants to limits.py * Adapt foubrar model builder and USD asset to produce the same result in sim example * Purge "physical" goems and collapse all into a single group, and purge geometry "layers" * Disable allocation per-joint wrenches by default and make them optional * Make `Model` a dataclass * Separate ModelData* containers into own `core/data.py` module * Fix imports of ModelData * Rename `Model` as `ModelKamino` * Rename `ModelData` as `DataKamino` * Rename `State` as `StateKamino` * Rename `Control` as `ControlKamino` * Rename `Limits` as `LimitsKamino` * Rename `Contacts` as `ContactsKamino` * Rename `ModelBuilder` as `ModelBuilderKamino` * Make imports in test utilities relative * Revise CD meta-data attributes and their computation in GeometryModel and ModelBuilderKamino * Revise primitive CD pipeline * Revise unified CD pipeline * Revise CD front-end interfaces * Fix UTs and relevant utils for interface changes to CD * Change to `wp.DeviceLike` to account for upcoming deprecation of `Devicelike` * Depracate legacy HDF5 data io (will be replaced in the future) * Fix banned imports at module level * Modify USD importer to detect articulations and order geoms and joints similarly to how the Newton `parse_usd` function does. * Add conversion operation from `newton.Model` to `ModelKamino` * Add data, state and control container conversions * Add SolverKamino wrapper that fullfils newton integration interface * Add newton integration examples * Add SolverKamino to newton solver module imports * WIP: fix problem with lambda_j being allocated for only kinematic constraints and failing on array copying * Fix banned git import in benchmark * Rename *Settings to *Config (#213) * Rename SolverKaminoSettings -> SolverKaminoConfig * Rename DualProblemSettings -> DualProblemConfig * Rename CollisionDetectorSettings -> CollisionDetectorConfig * Rename PADMMSettings -> PADMMConfig * Rename ForwardKinematicsSolverSettings -> ForwardKinematicsSolverConfig * Rename SimulatorSettings -> SimulatorConfig * Add check for model compatibility in SolverKamino (#209) * Fix device assignment in sparse CG test on CPU (#216) * Replace Enum-type config attributes with Literal (#215) * Replace warmstart mode config param with literal * Replace contact warmstart mode config param with literal * Replace rotation correction config param with literal * Replace penalty update config param with literal * Replace FK preconditioner option config param with literal * Add post-init checks for dual/PADMM configs * Rename FKPreconditionerOptions to FKPreconditionerType * Remove WorldDescriptor from ModelKamino (#219) * Add geom index offset array to model info * Replace access to world description in model * Remove world descriptor from model * Fix computation of kinematics residual with sparse Jacobian (#220) * Migrates `ModelKaminoSize` to it's own module to avoid circular dependency between core/model.py and core/state.py and rename it as `SizeKamino`. * WIP: Fix SolverKamino wrapper * Fix circular dependency in conversions.py * Fix some broken unit tests and WIP to fix fourbar contact conversions and rendering * Make some conversions @staticmethods instead, because they dont need common class attributes * Fix declaration of custom state attributes and their conversion to/from newton and kamino * WIP: Debug model conversion and newton sim examples * Rename and cleanup start index array of per-world geoms * Model conversion and newton sim examples now work. * Make gravity conversion operation re-usable * Migrates boxes_fourbar builder using newton.ModelBuilder to it's own module to prepare for migration. * Use gravity conversion utility func in SolverKamino * Add reusable joint-parameterization conversion utility * Remove world-descriptor from model converter * Rename helper converter that handles entity-local transforms * Add some cleanup to DR Legs, ANYmal D and basic four-bar examples * Fix module-level imports of additional kamino-specific development dependencies * Fix module-level imports of additional kamino-specific development dependencies * Fix erroneous merge conflict. --------- Signed-off-by: Alain Denzler <adenzler@nvidia.com> Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> Signed-off-by: JC <jumyungc@nvidia.com> Signed-off-by: Milad Rakhsha <mrakhsha@nvidia.com> Signed-off-by: Milad-Rakhsha-NV <167464435+Milad-Rakhsha-NV@users.noreply.github.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Miles Macklin <mmacklin@nvidia.com> Signed-off-by: adenzler-nvidia <adenzler@nvidia.com> Signed-off-by: jvonmuralt <jvonmuralt@nvidia.com> Co-authored-by: Daniela Hase <116915287+daniela-hase@users.noreply.github.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> Co-authored-by: Viktor Reutskyy <33062116+vreutskyy@users.noreply.github.com> Co-authored-by: Eric Shi <97630937+shi-eric@users.noreply.github.com> Co-authored-by: Anka Chen <AnkaChan@users.noreply.github.com> Co-authored-by: Claude Sonnet 4.5 <noreply@anthropic.com> Co-authored-by: JC-nvidia <116605903+jumyungc@users.noreply.github.com> Co-authored-by: Kenny Vilella <kvilella@nvidia.com> Co-authored-by: nvtw <110816143+nvtw@users.noreply.github.com> Co-authored-by: Milad-Rakhsha-NV <167464435+Milad-Rakhsha-NV@users.noreply.github.com> Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com> Co-authored-by: Lennart Röstel <65088822+lenroe@users.noreply.github.com> Co-authored-by: Eric Heiden <eheiden@nvidia.com> Co-authored-by: jvonmuralt <jvonmuralt@nvidia.com> Co-authored-by: camevor <camevor@nvidia.com> Co-authored-by: mzamoramora-nvidia <mzamoramora@nvidia.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com> Co-authored-by: Alessandro Roncone <alecive87@gmail.com> Co-authored-by: gdaviet <57617656+gdaviet@users.noreply.github.com> Co-authored-by: Miles Macklin <mmacklin@nvidia.com> Co-authored-by: Gordon Yeoman <gyeomannvidia@users.noreply.github.com> Co-authored-by: Lukasz Wawrzyniak <lwawrzyniak@nvidia.com> Co-authored-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Cursor <cursoragent@cursor.com> Co-authored-by: Viktor Reutskyy <vreutskyy@nvidia.com> Co-authored-by: Lorenzo Terenzi <lorenzoterenzi96@gmail.com> Co-authored-by: smollerNV <164020096+smollerNV@users.noreply.github.com> Co-authored-by: twidmer <twidmer@nvidia.com> Co-authored-by: Christian Schumacher <christian.schumacher@disney.com> Co-authored-by: Guirec-Maloisel <25688871+Guirec-Maloisel@users.noreply.github.com>
vastsoun
added a commit
to vastsoun/newton
that referenced
this pull request
Mar 4, 2026
* [Warp Raytrace] Added device parameter (newton-physics#1544) * [Warp Raytrace] Added device parameter to previously overlooked call (newton-physics#1545) * SolverMuJoCo: Fix tolerance clamping in update_solver_options_kernel (newton-physics#1546) * Change default shape_ke to align with MuJoCo, parse geom solref from MJCF for contact stiffness/damping (newton-physics#1491) Signed-off-by: Alain Denzler <adenzler@nvidia.com> * Fix log_shapes broadcasting for length-1 warp arrays (newton-physics#1550) * Fix XPBD restitution particle index (newton-physics#1557) * Out-of-Bound memory read in example_diffsim_bear newton-physics#1386 (newton-physics#1533) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Add versioned documentation deployment to GitHub Pages (newton-physics#1560) * Fix broken documentation links after versioned docs deployment (newton-physics#1566) * VBD New Features (newton-physics#1479) Co-authored-by: Claude Sonnet 4.5 <noreply@anthropic.com> * Add banners to membership verification workflow steps (newton-physics#1569) * Support cable junctions (newton-physics#1519) Signed-off-by: JC <jumyungc@nvidia.com> * Rename parameter I to inertia newton-physics#1543 (newton-physics#1551) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Fix example_robot_anymal_c_walk.py (newton-physics#1574) * Change everywhere linesearch to iterative (newton-physics#1573) * Remove standard collision pipeline (newton-physics#1538) * USD Plumbing MJC solver attributes through resolver and custom attribute framework (newton-physics#1463) Signed-off-by: Milad Rakhsha <mrakhsha@nvidia.com> Signed-off-by: Milad-Rakhsha-NV <167464435+Milad-Rakhsha-NV@users.noreply.github.com> Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> * Fix child shape filtering (newton-physics#1559) * Fix ViewerRerun ignoring hidden parameter in log_mesh and log_instances (newton-physics#1555) * Make NxN and SAP broad phase respect filtered pairs (newton-physics#1554) * Add --quiet flag to examples to suppress Warp messages (newton-physics#1585) * Defer resolution of MESH_MAXHULLVERT default in importers (newton-physics#1587) * Fix TypeError when finalizing SDF geometry with device kwarg (newton-physics#1586) * Make MESH_MAXHULLVERT a static class attribute Mesh.MAX_HULL_VERTICES. (newton-physics#1598) * Significant non-determinism in unified collision pipeline for anymal_c_walking example newton-physics#1505 (newton-physics#1588) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Add test for non-contiguous case (newton-physics#1549) * Fix nightly Warp CI to resolve pre-release builds (newton-physics#1606) * Verify default class and value handling (newton-physics#1556) * SolverMuJoCo: Expand geom_margin to avoid OOB read with heterogeneous worlds (newton-physics#1607) * Fix bug in control clear method (newton-physics#1602) * Enable Use of Newton IK in Lab newton-physics#662 (newton-physics#1539) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Fix import of non-articulated joints (newton-physics#1535) * Deduplicate _process_joint_custom_attributes frequency handling (newton-physics#1584) * Add CI check for stale API docs and fix local build warnings (newton-physics#1570) * Update Pillow 12.0.0 to 12.1.1 (newton-physics#1612) * Prepare handling of mimic constraints in Newton (newton-physics#1523) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Support floating, base_joint and parent_body arguments for importers (newton-physics#1498) * Fix contact buffer memory overestimation (newton-physics#1614) * Configure banned-module-level-imports for ruff (newton-physics#1583) * Explicit `Contacts` instantiation with `Model.contacts()` and `CollisionPipeline.contacts()` (newton-physics#1445) * Fix the quadruped benchmark regression (newton-physics#1615) * Change default ignore_inertial_definitions from True to False (newton-physics#1537) * Finalize the Recording API (newton-physics#1600) * SolverMuJoCo: Fix ccd_iterations default (newton-physics#1631) * update gitignore to ignore Claude Code sandbox files (newton-physics#1628) * Add mimic joint support to SolverMuJoCo (newton-physics#1627) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Add --no-cache-clear flag to test runner (newton-physics#1629) * Update MuJoCo and MuJoCo Warp to 3.5.0 release (newton-physics#1633) * Improve inertia parsing from USD (newton-physics#1605) Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com> * Remove standalone .typos.toml in favor of pyproject.toml config (newton-physics#1642) * Heightfield support newton-physics#1189 (newton-physics#1547) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Example_robot_policy: Replace ValueError with clean error for missing PhysX policy (newton-physics#1636) Co-authored-by: Viktor Reutskyy <33062116+vreutskyy@users.noreply.github.com> * Avoid unnecessary inflation of the contact reduction voxel aabb (newton-physics#1650) * Rename num_worlds to world_count (newton-physics#1634) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Support parsing autolimits from MJCF (newton-physics#1651) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Fix particle-shape restitution ignoring body velocity (newton-physics#1273) (newton-physics#1580) * Add overflow warnings for narrow-phase collision buffers (newton-physics#1643) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Documentation: add units to model/state docstrings (newton-physics#1649) * fix(viewer): add missing JointType.BALL support to contact line kernel (newton-physics#1640) * Make terrain mesh visual-only in anymal C walking example (newton-physics#1660) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Fix initialization of collider state in MPM finite difference mode (newton-physics#1652) * docs: document ModelBuilder.default_shape_cfg (newton-physics#1662) * Finalize the collision API (newton-physics#1581) * Remove hardcoded subnet ID from AWS workflow (newton-physics#1664) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Attempt to fix AWS config (newton-physics#1666) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Update AWS workflows to g7e.2xlarge with multi-AZ failover (newton-physics#1669) * fix(viewer-usd): disambiguate log_points colors for N=3 warp arrays (newton-physics#1661) * Viewer gl optimizations (newton-physics#1656) Signed-off-by: Miles Macklin <mmacklin@nvidia.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> Co-authored-by: Eric Heiden <eheiden@nvidia.com> * docs: add articulation workflow guidance and regression check (newton-physics#1663) * fix(examples): propagate IK solution to model state in Franka example (newton-physics#1637) * fix(deps,docs): bump nbconvert to 7.17.0 and fix ArticulationView doctest (newton-physics#1670) * Cleanup and improve some example (newton-physics#1625) Signed-off-by: adenzler-nvidia <adenzler@nvidia.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> * Handle zero-mass bodies and flip ensure_nonstatic_links default (newton-physics#1635) * Additional testing for ArticulationView (newton-physics#1527) Co-authored-by: Eric Heiden <eheiden@nvidia.com> * Update warp-lang nightly to 1.12.0.dev20260217 (newton-physics#1677) * Change default friction coefficients to match MuJoCo (newton-physics#1681) * Refactor mesh creation functions (newton-physics#1654) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Parse joint frictionloss from MJCF (newton-physics#1680) * Fix free joint body_pos and add ref/qpos0 support for MuJoCo solver (newton-physics#1645) * Fix root shapes in ArticulationView with fixed base (newton-physics#1639) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Use model collision methods and remove `create_collision_pipeline` from examples (newton-physics#1648) Co-authored-by: nvtw <110816143+nvtw@users.noreply.github.com> * Fix XPBD apply_joint_forces ignoring child joint transform (newton-physics#1582) * Adjust SDF API (newton-physics#1644) Co-authored-by: Eric Heiden <eheiden@nvidia.com> * Optimize test suite runtime (~18% faster) (newton-physics#1689) * Remove ensure_nonstatic_links option from importers (newton-physics#1682) Signed-off-by: adenzler-nvidia <adenzler@nvidia.com> * SolverMuJoCo: Add geom_margin support, align thickness default with MuJoCo and schemas (newton-physics#1653) * refactor: privatize non-public solver internals (newton-physics#1683) * Fix option parsing with multiple <option> elements from includes (newton-physics#1692) * Bump warp-lang nightly and newton-usd-schemas (newton-physics#1693) * Get rid of tkinter dependency (newton-physics#1676) * Fix SDF example contact buffer overflow (newton-physics#1695) * Fix implicit biastype for position/velocity actuator shortcuts (newton-physics#1678) * Fix include processor to respect meshdir/texturedir (newton-physics#1685) * Reduce cold-cache Warp compile time for geometry modules (newton-physics#1618) Co-authored-by: Cursor <cursoragent@cursor.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> * Fix xyzw-to-wxyz quaternion conversion in body inertia kernel (newton-physics#1694) * Rename key to label and add hierarchical labels (newton-physics#1592) (newton-physics#1632) * Expose geometry SDF helpers on public API (newton-physics#1684) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Improve custom frequency handling from USD, parse MuJoCo actuators and tendons (newton-physics#1510) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Collapse fixed joints with non articulated bodies (newton-physics#1608) * Fix renaming joint_key -> joint_label (newton-physics#1700) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Bump .python-version from 3.11 to 3.12 (newton-physics#1702) * Replace CITATION.md with CITATION.cff (newton-physics#1706) * Respect MJCF contype=conaffinity=0 via collision_group=0 (newton-physics#1703) * Make ViewerUSD reuse existing USD layers for the same output path (newton-physics#1704) Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Remove dead up-axis conversion from MuJoCo solver (newton-physics#1707) * Skip IK cube stacking example test (newton-physics#1713) * Fix global pairs (world=-1) not exported to MuJoCo spec (newton-physics#1705) * Reduce the memory consumption of hydroelastic contacts (newton-physics#1609) * Fix flakiness cube stacking (newton-physics#1714) * Fix collision shapes not toggleable in viewer UI (newton-physics#1715) * Fix softbody examples table layout in README (newton-physics#1716) * Standardize sensor APIs: label matching, keyword args, and update() method naming (newton-physics#1665) * Fix intermittent crash in parallel test runner from Manager proxy race (newton-physics#1721) * Clean up inertia.py function arguments to match Mesh.create_* API (newton-physics#1719) * Reduce default test runner verbosity (newton-physics#1723) * Add menagerie comparison tests for SolverMuJoCo (newton-physics#1720) Signed-off-by: Alain Denzler <adenzler@nvidia.com> Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> Co-authored-by: Viktor Reutskyy <vreutskyy@nvidia.com> Co-authored-by: Viktor Reutskyy <33062116+vreutskyy@users.noreply.github.com> * Add spatial tendon support for MuJoCo solver (newton-physics#1687) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Expose qfrc_actuator from mujoco (newton-physics#1698) * Skip non-MODEL custom attributes in finalize validation (newton-physics#1734) * Resolve inheritrange for position actuators in MJCF parser (newton-physics#1727) * Support dampratio for position/velocity actuator shortcuts (newton-physics#1722) * Limit concurrency to 1 (newton-physics#1736) * Add a helper method for checking applied usd (newton-physics#1731) * Enhance playback URL handling in ViewerViser (newton-physics#1742) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Removed RenderShapeType (newton-physics#1748) * Override only MassAPI attributes that have been authored (newton-physics#1688) * Integration of newton-actuators (newton-physics#1342) Signed-off-by: jvonmuralt <jvonmuralt@nvidia.com> * Fix ArticulationView crash with fixed-joint-only articulations (newton-physics#1726) * Improve retrieval of Jupyter base URL in ViewerViser (newton-physics#1750) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Disable dynamics testing for UR5e and Apollo tests to avoid CI flakiness (newton-physics#1755) * Margin and Gap rename (newton-physics#1732) * Vbd Demos Fixing (newton-physics#1740) * Fix ViewerViser.log_lines method (newton-physics#1764) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Update warp-lang dependency to 1.12.0rc1 (newton-physics#1763) * Fix fromto capsule/cylinder orientation in MJCF parser (newton-physics#1741) * fix: multi-world particle BVH indexing (newton-physics#1641) Co-authored-by: Eric Heiden <eheiden@nvidia.com> * Clean up unused and internal-only kwargs in SolverMuJoCo (newton-physics#1766) * Parsing of the mimic joint and contact gap/margin from newton schemas (newton-physics#1690) Signed-off-by: Milad Rakhsha <mrakhsha@nvidia.com> * API Refactor v2 (newton-physics#1749) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Support explicit geom mass attributes in MJCF (newton-physics#1744) * Bump flask and werkzeug in lockfile for security (newton-physics#1769) Co-authored-by: Cursor <cursoragent@cursor.com> * Split MJCF worldbody root bodies into separate articulations (newton-physics#1754) * Expose VBD rigid contact forces for solver coupling (newton-physics#1745) Signed-off-by: JC <jumyungc@nvidia.com> * Add MJCF ellipsoid geom import and regression test (newton-physics#1772) Co-authored-by: Cursor <cursoragent@cursor.com> * Weld equality constraints parsed from mjcf are given Nan as the default value of torquescale. The correct default should be 1.0 (newton-physics#1760) * Improve picking accuracy and stability (newton-physics#1712) * Franka cloth demo improvement (newton-physics#1765) * Support computing sensing object transforms & API cleanup (newton-physics#1759) * Remove threading workaround (newton-physics#1751) * [Warp Raytrace] Consolidated ray intersect functions, renamed Options to Config (newton-physics#1767) * Improve README example gallery for PyPI compatibility (newton-physics#1776) * Fix issue with mesh in rerun viewer (newton-physics#1768) * Add PhysxMimicJointAPI parsing to USD importer (newton-physics#1735) * Move some math functions to Warp (newton-physics#1717) Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Add test to ensure MJCF xform argument is relative (newton-physics#1777) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Emit diaginertia instead of fullinertia for diagonal body inertia (newton-physics#1780) * Change default joint armature from 0.01 to 0 (newton-physics#1782) * Fix default kp/kv for position and velocity actuators (newton-physics#1786) * Lock body inertia after explicit MJCF <inertial> element (newton-physics#1784) * Fix for MJCF actuator custom attributes (newton-physics#1783) * Bump version to 0.2.3 Prepare the package metadata for the v0.2.3 release tag. * Fix ViewerRerun rendering of instances from hidden meshes (newton-physics#1788) * API cleanup (newton-physics#1789) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * BODY actuator target name bypasses body name de-duplication in SolverMuJoCo (newton-physics#1729) * Use default density for visual geoms in MJCF import (newton-physics#1781) * Fix GL viewer crash on Wayland (newton-physics#1793) * Make USD xform parameter control absolute articulation placement (newton-physics#1771) * Fix CUDA context corruption in SDF implementation (newton-physics#1792) * Bump mujoco-warp dependency to 3.5.0.2 (newton-physics#1779) * Fix MuJoCo margin/gap conversion (newton-physics#1785) * Bump version to 1.1.0.dev0 (newton-physics#1798) * Missing unittest.main added back to test_import_mjcf.py. Helps with F5 debugging in VS Code. (newton-physics#1796) * Improve H1 example (newton-physics#1801) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Fix ViewerViser.set_camera() (newton-physics#1805) * Rename examples to follow prefix-first naming convention (newton-physics#1802) * Improve MuJoCo actuator domain randomization (newton-physics#1773) * Restore in_cup test in hydro example (newton-physics#1775) * Fix `newton.geometry` imports and change of Mesh maxhullverts global constant * Adapt to having both margin and gap arrays for each geom/shape * Fix for newton.geometry API changes in primitive/narrowphase.py * Fix removal of `BroadPhaseMode` IntEnum and revert to newton-sytle string literals * WIP: Adapt geometry/unified.py to fix breaking changes to `newton.geometry` API * First pass of API adjustments * Patch more gaps (with respect to margin and gap renaming) * GeoType.SDF was removed - reflect that in Kamino * Introduce CoM position offsets w.r.t body frame and operations to convert between body CoM state and generic local body-fixed reference frames. * Add caching of per-entity labels/names/keys in the Model subcontainers * Remove SDF shape wrapper since it's now internal to mesh handling in CD pipelines * Fix USD test assets * Add Newton <--> Kamino joint type conversion operations and per-space default limit constants * Add some cleanup to geometry and unified CD + UTs * Add Newton <--> Kamino shape type conversion operations * Apply new default joint coord limit constants to limits.py * Adapt foubrar model builder and USD asset to produce the same result in sim example * Purge "physical" goems and collapse all into a single group, and purge geometry "layers" * Disable allocation per-joint wrenches by default and make them optional * Make `Model` a dataclass * Separate ModelData* containers into own `core/data.py` module * Fix imports of ModelData * Rename `Model` as `ModelKamino` * Rename `ModelData` as `DataKamino` * Rename `State` as `StateKamino` * Rename `Control` as `ControlKamino` * Rename `Limits` as `LimitsKamino` * Rename `Contacts` as `ContactsKamino` * Rename `ModelBuilder` as `ModelBuilderKamino` * Make imports in test utilities relative * Revise CD meta-data attributes and their computation in GeometryModel and ModelBuilderKamino * Revise primitive CD pipeline * Revise unified CD pipeline * Revise CD front-end interfaces * Fix UTs and relevant utils for interface changes to CD * Change to `wp.DeviceLike` to account for upcoming deprecation of `Devicelike` * Depracate legacy HDF5 data io (will be replaced in the future) * Fix banned imports at module level * Modify USD importer to detect articulations and order geoms and joints similarly to how the Newton `parse_usd` function does. * Add conversion operation from `newton.Model` to `ModelKamino` * Add data, state and control container conversions * Add SolverKamino wrapper that fullfils newton integration interface * Add newton integration examples * Add SolverKamino to newton solver module imports * WIP: fix problem with lambda_j being allocated for only kinematic constraints and failing on array copying * Fix banned git import in benchmark * Rename *Settings to *Config (#213) * Rename SolverKaminoSettings -> SolverKaminoConfig * Rename DualProblemSettings -> DualProblemConfig * Rename CollisionDetectorSettings -> CollisionDetectorConfig * Rename PADMMSettings -> PADMMConfig * Rename ForwardKinematicsSolverSettings -> ForwardKinematicsSolverConfig * Rename SimulatorSettings -> SimulatorConfig * Add check for model compatibility in SolverKamino (#209) * Fix device assignment in sparse CG test on CPU (#216) * Replace Enum-type config attributes with Literal (#215) * Replace warmstart mode config param with literal * Replace contact warmstart mode config param with literal * Replace rotation correction config param with literal * Replace penalty update config param with literal * Replace FK preconditioner option config param with literal * Add post-init checks for dual/PADMM configs * Rename FKPreconditionerOptions to FKPreconditionerType * Remove WorldDescriptor from ModelKamino (#219) * Add geom index offset array to model info * Replace access to world description in model * Remove world descriptor from model * Fix computation of kinematics residual with sparse Jacobian (#220) * Migrates `ModelKaminoSize` to it's own module to avoid circular dependency between core/model.py and core/state.py and rename it as `SizeKamino`. * WIP: Fix SolverKamino wrapper * Fix circular dependency in conversions.py * Fix some broken unit tests and WIP to fix fourbar contact conversions and rendering * Make some conversions @staticmethods instead, because they dont need common class attributes * Fix declaration of custom state attributes and their conversion to/from newton and kamino * WIP: Debug model conversion and newton sim examples * Rename and cleanup start index array of per-world geoms * Model conversion and newton sim examples now work. * Make gravity conversion operation re-usable * Migrates boxes_fourbar builder using newton.ModelBuilder to it's own module to prepare for migration. * Use gravity conversion utility func in SolverKamino * Add reusable joint-parameterization conversion utility * Remove world-descriptor from model converter * Rename helper converter that handles entity-local transforms * Add some cleanup to DR Legs, ANYmal D and basic four-bar examples * Fix module-level imports of additional kamino-specific development dependencies * Fix module-level imports of additional kamino-specific development dependencies * Fix erroneous merge conflict. --------- Signed-off-by: Alain Denzler <adenzler@nvidia.com> Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> Signed-off-by: JC <jumyungc@nvidia.com> Signed-off-by: Milad Rakhsha <mrakhsha@nvidia.com> Signed-off-by: Milad-Rakhsha-NV <167464435+Milad-Rakhsha-NV@users.noreply.github.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Miles Macklin <mmacklin@nvidia.com> Signed-off-by: adenzler-nvidia <adenzler@nvidia.com> Signed-off-by: jvonmuralt <jvonmuralt@nvidia.com> Co-authored-by: Daniela Hase <116915287+daniela-hase@users.noreply.github.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> Co-authored-by: Viktor Reutskyy <33062116+vreutskyy@users.noreply.github.com> Co-authored-by: Eric Shi <97630937+shi-eric@users.noreply.github.com> Co-authored-by: Anka Chen <AnkaChan@users.noreply.github.com> Co-authored-by: Claude Sonnet 4.5 <noreply@anthropic.com> Co-authored-by: JC-nvidia <116605903+jumyungc@users.noreply.github.com> Co-authored-by: Kenny Vilella <kvilella@nvidia.com> Co-authored-by: nvtw <110816143+nvtw@users.noreply.github.com> Co-authored-by: Milad-Rakhsha-NV <167464435+Milad-Rakhsha-NV@users.noreply.github.com> Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com> Co-authored-by: Lennart Röstel <65088822+lenroe@users.noreply.github.com> Co-authored-by: Eric Heiden <eheiden@nvidia.com> Co-authored-by: jvonmuralt <jvonmuralt@nvidia.com> Co-authored-by: camevor <camevor@nvidia.com> Co-authored-by: mzamoramora-nvidia <mzamoramora@nvidia.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com> Co-authored-by: Alessandro Roncone <alecive87@gmail.com> Co-authored-by: gdaviet <57617656+gdaviet@users.noreply.github.com> Co-authored-by: Miles Macklin <mmacklin@nvidia.com> Co-authored-by: Gordon Yeoman <gyeomannvidia@users.noreply.github.com> Co-authored-by: Lukasz Wawrzyniak <lwawrzyniak@nvidia.com> Co-authored-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Cursor <cursoragent@cursor.com> Co-authored-by: Viktor Reutskyy <vreutskyy@nvidia.com> Co-authored-by: Lorenzo Terenzi <lorenzoterenzi96@gmail.com> Co-authored-by: smollerNV <164020096+smollerNV@users.noreply.github.com> Co-authored-by: twidmer <twidmer@nvidia.com> Co-authored-by: Christian Schumacher <christian.schumacher@disney.com> Co-authored-by: Guirec-Maloisel <25688871+Guirec-Maloisel@users.noreply.github.com>
vastsoun
added a commit
to vastsoun/newton
that referenced
this pull request
Mar 4, 2026
* [Warp Raytrace] Added device parameter (newton-physics#1544) * [Warp Raytrace] Added device parameter to previously overlooked call (newton-physics#1545) * SolverMuJoCo: Fix tolerance clamping in update_solver_options_kernel (newton-physics#1546) * Change default shape_ke to align with MuJoCo, parse geom solref from MJCF for contact stiffness/damping (newton-physics#1491) Signed-off-by: Alain Denzler <adenzler@nvidia.com> * Fix log_shapes broadcasting for length-1 warp arrays (newton-physics#1550) * Fix XPBD restitution particle index (newton-physics#1557) * Out-of-Bound memory read in example_diffsim_bear newton-physics#1386 (newton-physics#1533) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Add versioned documentation deployment to GitHub Pages (newton-physics#1560) * Fix broken documentation links after versioned docs deployment (newton-physics#1566) * VBD New Features (newton-physics#1479) Co-authored-by: Claude Sonnet 4.5 <noreply@anthropic.com> * Add banners to membership verification workflow steps (newton-physics#1569) * Support cable junctions (newton-physics#1519) Signed-off-by: JC <jumyungc@nvidia.com> * Rename parameter I to inertia newton-physics#1543 (newton-physics#1551) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Fix example_robot_anymal_c_walk.py (newton-physics#1574) * Change everywhere linesearch to iterative (newton-physics#1573) * Remove standard collision pipeline (newton-physics#1538) * USD Plumbing MJC solver attributes through resolver and custom attribute framework (newton-physics#1463) Signed-off-by: Milad Rakhsha <mrakhsha@nvidia.com> Signed-off-by: Milad-Rakhsha-NV <167464435+Milad-Rakhsha-NV@users.noreply.github.com> Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> * Fix child shape filtering (newton-physics#1559) * Fix ViewerRerun ignoring hidden parameter in log_mesh and log_instances (newton-physics#1555) * Make NxN and SAP broad phase respect filtered pairs (newton-physics#1554) * Add --quiet flag to examples to suppress Warp messages (newton-physics#1585) * Defer resolution of MESH_MAXHULLVERT default in importers (newton-physics#1587) * Fix TypeError when finalizing SDF geometry with device kwarg (newton-physics#1586) * Make MESH_MAXHULLVERT a static class attribute Mesh.MAX_HULL_VERTICES. (newton-physics#1598) * Significant non-determinism in unified collision pipeline for anymal_c_walking example newton-physics#1505 (newton-physics#1588) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Add test for non-contiguous case (newton-physics#1549) * Fix nightly Warp CI to resolve pre-release builds (newton-physics#1606) * Verify default class and value handling (newton-physics#1556) * SolverMuJoCo: Expand geom_margin to avoid OOB read with heterogeneous worlds (newton-physics#1607) * Fix bug in control clear method (newton-physics#1602) * Enable Use of Newton IK in Lab newton-physics#662 (newton-physics#1539) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Fix import of non-articulated joints (newton-physics#1535) * Deduplicate _process_joint_custom_attributes frequency handling (newton-physics#1584) * Add CI check for stale API docs and fix local build warnings (newton-physics#1570) * Update Pillow 12.0.0 to 12.1.1 (newton-physics#1612) * Prepare handling of mimic constraints in Newton (newton-physics#1523) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Support floating, base_joint and parent_body arguments for importers (newton-physics#1498) * Fix contact buffer memory overestimation (newton-physics#1614) * Configure banned-module-level-imports for ruff (newton-physics#1583) * Explicit `Contacts` instantiation with `Model.contacts()` and `CollisionPipeline.contacts()` (newton-physics#1445) * Fix the quadruped benchmark regression (newton-physics#1615) * Change default ignore_inertial_definitions from True to False (newton-physics#1537) * Finalize the Recording API (newton-physics#1600) * SolverMuJoCo: Fix ccd_iterations default (newton-physics#1631) * update gitignore to ignore Claude Code sandbox files (newton-physics#1628) * Add mimic joint support to SolverMuJoCo (newton-physics#1627) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Add --no-cache-clear flag to test runner (newton-physics#1629) * Update MuJoCo and MuJoCo Warp to 3.5.0 release (newton-physics#1633) * Improve inertia parsing from USD (newton-physics#1605) Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com> * Remove standalone .typos.toml in favor of pyproject.toml config (newton-physics#1642) * Heightfield support newton-physics#1189 (newton-physics#1547) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Example_robot_policy: Replace ValueError with clean error for missing PhysX policy (newton-physics#1636) Co-authored-by: Viktor Reutskyy <33062116+vreutskyy@users.noreply.github.com> * Avoid unnecessary inflation of the contact reduction voxel aabb (newton-physics#1650) * Rename num_worlds to world_count (newton-physics#1634) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Support parsing autolimits from MJCF (newton-physics#1651) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Fix particle-shape restitution ignoring body velocity (newton-physics#1273) (newton-physics#1580) * Add overflow warnings for narrow-phase collision buffers (newton-physics#1643) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Documentation: add units to model/state docstrings (newton-physics#1649) * fix(viewer): add missing JointType.BALL support to contact line kernel (newton-physics#1640) * Make terrain mesh visual-only in anymal C walking example (newton-physics#1660) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Fix initialization of collider state in MPM finite difference mode (newton-physics#1652) * docs: document ModelBuilder.default_shape_cfg (newton-physics#1662) * Finalize the collision API (newton-physics#1581) * Remove hardcoded subnet ID from AWS workflow (newton-physics#1664) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Attempt to fix AWS config (newton-physics#1666) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Update AWS workflows to g7e.2xlarge with multi-AZ failover (newton-physics#1669) * fix(viewer-usd): disambiguate log_points colors for N=3 warp arrays (newton-physics#1661) * Viewer gl optimizations (newton-physics#1656) Signed-off-by: Miles Macklin <mmacklin@nvidia.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> Co-authored-by: Eric Heiden <eheiden@nvidia.com> * docs: add articulation workflow guidance and regression check (newton-physics#1663) * fix(examples): propagate IK solution to model state in Franka example (newton-physics#1637) * fix(deps,docs): bump nbconvert to 7.17.0 and fix ArticulationView doctest (newton-physics#1670) * Cleanup and improve some example (newton-physics#1625) Signed-off-by: adenzler-nvidia <adenzler@nvidia.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> * Handle zero-mass bodies and flip ensure_nonstatic_links default (newton-physics#1635) * Additional testing for ArticulationView (newton-physics#1527) Co-authored-by: Eric Heiden <eheiden@nvidia.com> * Update warp-lang nightly to 1.12.0.dev20260217 (newton-physics#1677) * Change default friction coefficients to match MuJoCo (newton-physics#1681) * Refactor mesh creation functions (newton-physics#1654) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Parse joint frictionloss from MJCF (newton-physics#1680) * Fix free joint body_pos and add ref/qpos0 support for MuJoCo solver (newton-physics#1645) * Fix root shapes in ArticulationView with fixed base (newton-physics#1639) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Use model collision methods and remove `create_collision_pipeline` from examples (newton-physics#1648) Co-authored-by: nvtw <110816143+nvtw@users.noreply.github.com> * Fix XPBD apply_joint_forces ignoring child joint transform (newton-physics#1582) * Adjust SDF API (newton-physics#1644) Co-authored-by: Eric Heiden <eheiden@nvidia.com> * Optimize test suite runtime (~18% faster) (newton-physics#1689) * Remove ensure_nonstatic_links option from importers (newton-physics#1682) Signed-off-by: adenzler-nvidia <adenzler@nvidia.com> * SolverMuJoCo: Add geom_margin support, align thickness default with MuJoCo and schemas (newton-physics#1653) * refactor: privatize non-public solver internals (newton-physics#1683) * Fix option parsing with multiple <option> elements from includes (newton-physics#1692) * Bump warp-lang nightly and newton-usd-schemas (newton-physics#1693) * Get rid of tkinter dependency (newton-physics#1676) * Fix SDF example contact buffer overflow (newton-physics#1695) * Fix implicit biastype for position/velocity actuator shortcuts (newton-physics#1678) * Fix include processor to respect meshdir/texturedir (newton-physics#1685) * Reduce cold-cache Warp compile time for geometry modules (newton-physics#1618) Co-authored-by: Cursor <cursoragent@cursor.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> * Fix xyzw-to-wxyz quaternion conversion in body inertia kernel (newton-physics#1694) * Rename key to label and add hierarchical labels (newton-physics#1592) (newton-physics#1632) * Expose geometry SDF helpers on public API (newton-physics#1684) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Improve custom frequency handling from USD, parse MuJoCo actuators and tendons (newton-physics#1510) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Collapse fixed joints with non articulated bodies (newton-physics#1608) * Fix renaming joint_key -> joint_label (newton-physics#1700) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Bump .python-version from 3.11 to 3.12 (newton-physics#1702) * Replace CITATION.md with CITATION.cff (newton-physics#1706) * Respect MJCF contype=conaffinity=0 via collision_group=0 (newton-physics#1703) * Make ViewerUSD reuse existing USD layers for the same output path (newton-physics#1704) Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Remove dead up-axis conversion from MuJoCo solver (newton-physics#1707) * Skip IK cube stacking example test (newton-physics#1713) * Fix global pairs (world=-1) not exported to MuJoCo spec (newton-physics#1705) * Reduce the memory consumption of hydroelastic contacts (newton-physics#1609) * Fix flakiness cube stacking (newton-physics#1714) * Fix collision shapes not toggleable in viewer UI (newton-physics#1715) * Fix softbody examples table layout in README (newton-physics#1716) * Standardize sensor APIs: label matching, keyword args, and update() method naming (newton-physics#1665) * Fix intermittent crash in parallel test runner from Manager proxy race (newton-physics#1721) * Clean up inertia.py function arguments to match Mesh.create_* API (newton-physics#1719) * Reduce default test runner verbosity (newton-physics#1723) * Add menagerie comparison tests for SolverMuJoCo (newton-physics#1720) Signed-off-by: Alain Denzler <adenzler@nvidia.com> Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> Co-authored-by: Viktor Reutskyy <vreutskyy@nvidia.com> Co-authored-by: Viktor Reutskyy <33062116+vreutskyy@users.noreply.github.com> * Add spatial tendon support for MuJoCo solver (newton-physics#1687) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Expose qfrc_actuator from mujoco (newton-physics#1698) * Skip non-MODEL custom attributes in finalize validation (newton-physics#1734) * Resolve inheritrange for position actuators in MJCF parser (newton-physics#1727) * Support dampratio for position/velocity actuator shortcuts (newton-physics#1722) * Limit concurrency to 1 (newton-physics#1736) * Add a helper method for checking applied usd (newton-physics#1731) * Enhance playback URL handling in ViewerViser (newton-physics#1742) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Removed RenderShapeType (newton-physics#1748) * Override only MassAPI attributes that have been authored (newton-physics#1688) * Integration of newton-actuators (newton-physics#1342) Signed-off-by: jvonmuralt <jvonmuralt@nvidia.com> * Fix ArticulationView crash with fixed-joint-only articulations (newton-physics#1726) * Improve retrieval of Jupyter base URL in ViewerViser (newton-physics#1750) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Disable dynamics testing for UR5e and Apollo tests to avoid CI flakiness (newton-physics#1755) * Margin and Gap rename (newton-physics#1732) * Vbd Demos Fixing (newton-physics#1740) * Fix ViewerViser.log_lines method (newton-physics#1764) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Update warp-lang dependency to 1.12.0rc1 (newton-physics#1763) * Fix fromto capsule/cylinder orientation in MJCF parser (newton-physics#1741) * fix: multi-world particle BVH indexing (newton-physics#1641) Co-authored-by: Eric Heiden <eheiden@nvidia.com> * Clean up unused and internal-only kwargs in SolverMuJoCo (newton-physics#1766) * Parsing of the mimic joint and contact gap/margin from newton schemas (newton-physics#1690) Signed-off-by: Milad Rakhsha <mrakhsha@nvidia.com> * API Refactor v2 (newton-physics#1749) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Support explicit geom mass attributes in MJCF (newton-physics#1744) * Bump flask and werkzeug in lockfile for security (newton-physics#1769) Co-authored-by: Cursor <cursoragent@cursor.com> * Split MJCF worldbody root bodies into separate articulations (newton-physics#1754) * Expose VBD rigid contact forces for solver coupling (newton-physics#1745) Signed-off-by: JC <jumyungc@nvidia.com> * Add MJCF ellipsoid geom import and regression test (newton-physics#1772) Co-authored-by: Cursor <cursoragent@cursor.com> * Weld equality constraints parsed from mjcf are given Nan as the default value of torquescale. The correct default should be 1.0 (newton-physics#1760) * Improve picking accuracy and stability (newton-physics#1712) * Franka cloth demo improvement (newton-physics#1765) * Support computing sensing object transforms & API cleanup (newton-physics#1759) * Remove threading workaround (newton-physics#1751) * [Warp Raytrace] Consolidated ray intersect functions, renamed Options to Config (newton-physics#1767) * Improve README example gallery for PyPI compatibility (newton-physics#1776) * Fix issue with mesh in rerun viewer (newton-physics#1768) * Add PhysxMimicJointAPI parsing to USD importer (newton-physics#1735) * Move some math functions to Warp (newton-physics#1717) Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Add test to ensure MJCF xform argument is relative (newton-physics#1777) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Emit diaginertia instead of fullinertia for diagonal body inertia (newton-physics#1780) * Change default joint armature from 0.01 to 0 (newton-physics#1782) * Fix default kp/kv for position and velocity actuators (newton-physics#1786) * Lock body inertia after explicit MJCF <inertial> element (newton-physics#1784) * Fix for MJCF actuator custom attributes (newton-physics#1783) * Bump version to 0.2.3 Prepare the package metadata for the v0.2.3 release tag. * Fix ViewerRerun rendering of instances from hidden meshes (newton-physics#1788) * API cleanup (newton-physics#1789) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * BODY actuator target name bypasses body name de-duplication in SolverMuJoCo (newton-physics#1729) * Use default density for visual geoms in MJCF import (newton-physics#1781) * Fix GL viewer crash on Wayland (newton-physics#1793) * Make USD xform parameter control absolute articulation placement (newton-physics#1771) * Fix CUDA context corruption in SDF implementation (newton-physics#1792) * Bump mujoco-warp dependency to 3.5.0.2 (newton-physics#1779) * Fix MuJoCo margin/gap conversion (newton-physics#1785) * Bump version to 1.1.0.dev0 (newton-physics#1798) * Missing unittest.main added back to test_import_mjcf.py. Helps with F5 debugging in VS Code. (newton-physics#1796) * Improve H1 example (newton-physics#1801) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Fix ViewerViser.set_camera() (newton-physics#1805) * Rename examples to follow prefix-first naming convention (newton-physics#1802) * Improve MuJoCo actuator domain randomization (newton-physics#1773) * Restore in_cup test in hydro example (newton-physics#1775) * Fix `newton.geometry` imports and change of Mesh maxhullverts global constant * Adapt to having both margin and gap arrays for each geom/shape * Fix for newton.geometry API changes in primitive/narrowphase.py * Fix removal of `BroadPhaseMode` IntEnum and revert to newton-sytle string literals * WIP: Adapt geometry/unified.py to fix breaking changes to `newton.geometry` API * First pass of API adjustments * Patch more gaps (with respect to margin and gap renaming) * GeoType.SDF was removed - reflect that in Kamino * Introduce CoM position offsets w.r.t body frame and operations to convert between body CoM state and generic local body-fixed reference frames. * Add caching of per-entity labels/names/keys in the Model subcontainers * Remove SDF shape wrapper since it's now internal to mesh handling in CD pipelines * Fix USD test assets * Add Newton <--> Kamino joint type conversion operations and per-space default limit constants * Add some cleanup to geometry and unified CD + UTs * Add Newton <--> Kamino shape type conversion operations * Apply new default joint coord limit constants to limits.py * Adapt foubrar model builder and USD asset to produce the same result in sim example * Purge "physical" goems and collapse all into a single group, and purge geometry "layers" * Disable allocation per-joint wrenches by default and make them optional * Make `Model` a dataclass * Separate ModelData* containers into own `core/data.py` module * Fix imports of ModelData * Rename `Model` as `ModelKamino` * Rename `ModelData` as `DataKamino` * Rename `State` as `StateKamino` * Rename `Control` as `ControlKamino` * Rename `Limits` as `LimitsKamino` * Rename `Contacts` as `ContactsKamino` * Rename `ModelBuilder` as `ModelBuilderKamino` * Make imports in test utilities relative * Revise CD meta-data attributes and their computation in GeometryModel and ModelBuilderKamino * Revise primitive CD pipeline * Revise unified CD pipeline * Revise CD front-end interfaces * Fix UTs and relevant utils for interface changes to CD * Change to `wp.DeviceLike` to account for upcoming deprecation of `Devicelike` * Depracate legacy HDF5 data io (will be replaced in the future) * Fix banned imports at module level * Modify USD importer to detect articulations and order geoms and joints similarly to how the Newton `parse_usd` function does. * Add conversion operation from `newton.Model` to `ModelKamino` * Add data, state and control container conversions * Add SolverKamino wrapper that fullfils newton integration interface * Add newton integration examples * Add SolverKamino to newton solver module imports * WIP: fix problem with lambda_j being allocated for only kinematic constraints and failing on array copying * Fix banned git import in benchmark * Rename *Settings to *Config (#213) * Rename SolverKaminoSettings -> SolverKaminoConfig * Rename DualProblemSettings -> DualProblemConfig * Rename CollisionDetectorSettings -> CollisionDetectorConfig * Rename PADMMSettings -> PADMMConfig * Rename ForwardKinematicsSolverSettings -> ForwardKinematicsSolverConfig * Rename SimulatorSettings -> SimulatorConfig * Add check for model compatibility in SolverKamino (#209) * Fix device assignment in sparse CG test on CPU (#216) * Replace Enum-type config attributes with Literal (#215) * Replace warmstart mode config param with literal * Replace contact warmstart mode config param with literal * Replace rotation correction config param with literal * Replace penalty update config param with literal * Replace FK preconditioner option config param with literal * Add post-init checks for dual/PADMM configs * Rename FKPreconditionerOptions to FKPreconditionerType * Remove WorldDescriptor from ModelKamino (#219) * Add geom index offset array to model info * Replace access to world description in model * Remove world descriptor from model * Fix computation of kinematics residual with sparse Jacobian (#220) * Migrates `ModelKaminoSize` to it's own module to avoid circular dependency between core/model.py and core/state.py and rename it as `SizeKamino`. * WIP: Fix SolverKamino wrapper * Fix circular dependency in conversions.py * Fix some broken unit tests and WIP to fix fourbar contact conversions and rendering * Make some conversions @staticmethods instead, because they dont need common class attributes * Fix declaration of custom state attributes and their conversion to/from newton and kamino * WIP: Debug model conversion and newton sim examples * Rename and cleanup start index array of per-world geoms * Model conversion and newton sim examples now work. * Make gravity conversion operation re-usable * Migrates boxes_fourbar builder using newton.ModelBuilder to it's own module to prepare for migration. * Use gravity conversion utility func in SolverKamino * Add reusable joint-parameterization conversion utility * Remove world-descriptor from model converter * Rename helper converter that handles entity-local transforms * Add some cleanup to DR Legs, ANYmal D and basic four-bar examples * Fix module-level imports of additional kamino-specific development dependencies * Fix module-level imports of additional kamino-specific development dependencies * Fix erroneous merge conflict. --------- Signed-off-by: Alain Denzler <adenzler@nvidia.com> Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> Signed-off-by: JC <jumyungc@nvidia.com> Signed-off-by: Milad Rakhsha <mrakhsha@nvidia.com> Signed-off-by: Milad-Rakhsha-NV <167464435+Milad-Rakhsha-NV@users.noreply.github.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Miles Macklin <mmacklin@nvidia.com> Signed-off-by: adenzler-nvidia <adenzler@nvidia.com> Signed-off-by: jvonmuralt <jvonmuralt@nvidia.com> Co-authored-by: Daniela Hase <116915287+daniela-hase@users.noreply.github.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> Co-authored-by: Viktor Reutskyy <33062116+vreutskyy@users.noreply.github.com> Co-authored-by: Eric Shi <97630937+shi-eric@users.noreply.github.com> Co-authored-by: Anka Chen <AnkaChan@users.noreply.github.com> Co-authored-by: Claude Sonnet 4.5 <noreply@anthropic.com> Co-authored-by: JC-nvidia <116605903+jumyungc@users.noreply.github.com> Co-authored-by: Kenny Vilella <kvilella@nvidia.com> Co-authored-by: nvtw <110816143+nvtw@users.noreply.github.com> Co-authored-by: Milad-Rakhsha-NV <167464435+Milad-Rakhsha-NV@users.noreply.github.com> Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com> Co-authored-by: Lennart Röstel <65088822+lenroe@users.noreply.github.com> Co-authored-by: Eric Heiden <eheiden@nvidia.com> Co-authored-by: jvonmuralt <jvonmuralt@nvidia.com> Co-authored-by: camevor <camevor@nvidia.com> Co-authored-by: mzamoramora-nvidia <mzamoramora@nvidia.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com> Co-authored-by: Alessandro Roncone <alecive87@gmail.com> Co-authored-by: gdaviet <57617656+gdaviet@users.noreply.github.com> Co-authored-by: Miles Macklin <mmacklin@nvidia.com> Co-authored-by: Gordon Yeoman <gyeomannvidia@users.noreply.github.com> Co-authored-by: Lukasz Wawrzyniak <lwawrzyniak@nvidia.com> Co-authored-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Cursor <cursoragent@cursor.com> Co-authored-by: Viktor Reutskyy <vreutskyy@nvidia.com> Co-authored-by: Lorenzo Terenzi <lorenzoterenzi96@gmail.com> Co-authored-by: smollerNV <164020096+smollerNV@users.noreply.github.com> Co-authored-by: twidmer <twidmer@nvidia.com> Co-authored-by: Christian Schumacher <christian.schumacher@disney.com> Co-authored-by: Guirec-Maloisel <25688871+Guirec-Maloisel@users.noreply.github.com>
mmacklin
pushed a commit
to mmacklin/newton
that referenced
this pull request
Apr 7, 2026
3 tasks
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
3 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Summary
geom_margin = shape_margin + shape_gap,geom_gap = shape_gapshape_margin = mj_margin - mj_gap,shape_gap = mj_gapgeom_gapcustom attribute in favor of Newton's built-inmodel.shape_gapmj_gap > mj_marginduring importNonefrom USDGetAttribute().Get()on blocked attributesThe previous code copied margin and gap values directly without conversion, which meant
MuJoCo's
includemargin(=margin - gap, the surface inflation point where contactforces activate) did not match Newton's
shape_margin. After this fix,includemargincorrectly equals Newton's
shape_marginsince(margin + gap) - gap = margin.Mocap test adjustment
The mocap body test (
test_mocap_body_transform_updates_collision_geoms) was updatedbecause
naconcounts all detected contacts including inactive speculative ones(distance >
includemargin). With the corrected conversion, the defaultshape_gap=0.1now properly expands the detection envelope, causing
nacon > 0even when no contactforces act. Since the physics behavior (forces via
includemargin) is unchanged, thetest was updated to:
gap=0.0on test shapes to isolate from default gapnacon == 0Test plan
TestMuJoCoSolverGeomProperties(14 tests) - kernel conversion, gap/margin syncTestImportMjcfSolverParams- MJCF parsing with combined margin+gap, gap-only, margin-onlyTestImportUsdPhysics- USD parsing with authored mjc:margin + mjc:gapTestMjcfDefaultCustomAttributes- gap inheritance through default classesTestMuJoCoMocapBodies- physics-based assertions after platform removalSummary by CodeRabbit
New Features
Bug Fixes
Refactor
Tests