Change default ignore_inertial_definitions from True to False by adenzler-nvidia · Pull Request #1537 · newton-physics/newton

adenzler-nvidia · 2026-02-05T14:58:47Z

This makes URDF/MJCF importers respect inertial properties defined in files by default.

Changes:

Flipped default from True to False in import_urdf.py, import_mjcf.py, and builder.py
Fixed example_basic_urdf.py to explicitly set ignore_inertial_definitions=True since its quadruped.urdf has unstable inertia definitions
Updated test_single_mujoco_fixed_tendon_parsing to use MJCF-defined inertia and adjusted expected values accordingly (from [4.6796, 5.9226] to [4.5780, 5.7940])

Rationale:

High-quality URDFs (ANYmal, official robot models) have calibrated inertia that should be respected
Low-quality URDFs can explicitly opt into geometry-based calculation
This aligns with user expectations: file-defined properties should be used unless explicitly overridden
Tests that define explicit inertia should use and verify those values, not work around them

Test Results:

All 20 URDF import tests pass
All 94 MJCF import tests pass
basic_urdf example passes

Note: ANYmal example test failure is pre-existing on main branch (unrelated to this change).

Description

Newton Migration Guide

Please ensure the migration guide for warp.sim users is up-to-date with the changes made in this PR.

The migration guide in docs/migration.rst is up-to date

Before your PR is "Ready for review"

Necessary tests have been added and new examples are tested (see newton/tests/test_examples.py)
Documentation is up-to-date
Code passes formatting and linting checks with pre-commit run -a

Summary by CodeRabbit

Breaking Changes
- Inertial definitions in URDF/MJCF files are now processed and applied by default; callers must opt out to ignore them.
Examples
- An example was updated to explicitly opt out of inertial processing to retain geometry-based inertia.
Tests
- Tests and expected values updated to reflect the new default inertial handling.
Other
- Initial joint stiffness increased for one example robot.

This makes URDF/MJCF importers respect inertial properties defined in files by default. Changes: - Flipped default from True to False in import_urdf.py, import_mjcf.py, and builder.py - Fixed example_basic_urdf.py to explicitly set ignore_inertial_definitions=True since its quadruped.urdf has unstable inertia definitions - Updated test_single_mujoco_fixed_tendon_parsing to use MJCF-defined inertia and adjusted expected values accordingly (from [4.6796, 5.9226] to [4.5780, 5.7940]) - Fixed test_fixed_tendon.py tests to use ignore_inertial_definitions=True since their MJCF files have unrealistic inertia values (20x higher than geometry-based calculation) Rationale: - High-quality URDFs (ANYmal, official robot models) have calibrated inertia that should be respected - Low-quality URDFs can explicitly opt into geometry-based calculation - This aligns with user expectations: file-defined properties should be used unless explicitly overridden - Tests that define explicit inertia should use and verify those values, not work around them - Tests with unrealistic inertia values should opt into geometry-based calculation

coderabbitai · 2026-02-05T16:48:23Z

Note

Reviews paused

It looks like this branch is under active development. To avoid overwhelming you with review comments due to an influx of new commits, CodeRabbit has automatically paused this review. You can configure this behavior by changing the reviews.auto_review.auto_pause_after_reviewed_commits setting.

Use the following commands to manage reviews:

@coderabbitai resume to resume automatic reviews.
@coderabbitai review to trigger a single review.

Use the checkboxes below for quick actions:

▶️ Resume reviews
🔍 Trigger review

📝 Walkthrough

Walkthrough

Default behavior flipped: ignore_inertial_definitions now defaults to False in URDF/MJCF import and builder entry points; examples and tests were updated to pass True where geometry-derived inertia was previously required.

Changes

Cohort / File(s)	Summary
Builder API `newton/_src/sim/builder.py`	Changed defaults for `add_urdf()` and `add_mjcf()` — `ignore_inertial_definitions` default: `True` → `False`.
Importers `newton/_src/utils/import_urdf.py`, `newton/_src/utils/import_mjcf.py`	Changed defaults for `parse_urdf()` and `parse_mjcf()` — `ignore_inertial_definitions` default: `True` → `False`.
Examples `newton/examples/basic/example_basic_urdf.py`, `newton/examples/robot/example_robot_panda_hydro.py`	URDF example now passes `ignore_inertial_definitions=True`; Panda example increases initial stiffness for first 9 joints (500.0 → 650.0).
Tests `newton/tests/test_fixed_tendon.py`, `newton/tests/test_import_mjcf.py`	Tests updated to pass `ignore_inertial_definitions=True` where geometry-based inertia expected; one test expectation adjusted to reflect MJCF-defined inertia values.

Estimated code review effort

🎯 3 (Moderate) | ⏱️ ~20 minutes

Possibly related PRs

Use default_body_armature for nonstatic link inertia in urdf parser #870: Touches URDF inertia initialization in import_urdf.py — overlaps with changed URDF import defaults.
MJCF importer: correctly rotate inertia tensor #449: Modifies MJCF inertia parsing/rotation logic — directly relevant to parse_mjcf behavior.
Update robot examples #626: Changes importer APIs and ModelBuilder signatures — closely related to these signature/default edits.

Suggested reviewers

eric-heiden
vreutskyy

🚥 Pre-merge checks | ✅ 2 | ❌ 1

❌ Failed checks (1 warning)

Check name	Status	Explanation	Resolution
Docstring Coverage	⚠️ Warning	Docstring coverage is 77.78% which is insufficient. The required threshold is 80.00%.	Write docstrings for the functions missing them to satisfy the coverage threshold.

✅ Passed checks (2 passed)

Check name	Status	Explanation
Description Check	✅ Passed	Check skipped - CodeRabbit’s high-level summary is enabled.
Title check	✅ Passed	The title accurately and concisely describes the main change: flipping the default value of ignore_inertial_definitions from True to False across multiple API entry points.

_{✏️ Tip: You can configure your own custom pre-merge checks in the settings.}

✨ Finishing touches

🧪 Generate unit tests (beta)

Create PR with unit tests
Post copyable unit tests in a comment

Thanks for using CodeRabbit! It's free for OSS, and your support helps us grow. If you like it, consider giving us a shout-out.

❤️ Share

_{Comment @coderabbitai help to get the list of available commands and usage tips.}

codecov · 2026-02-05T16:58:13Z

Codecov Report

✅ All modified and coverable lines are covered by tests.
✅ All tests successful. No failed tests found.

📢 Thoughts on this report? Let us know!

The default change to ignore_inertial_definitions=False makes the Panda robot 27% heavier when using URDF-defined inertia. Bump joint_target_ke from 500 to 600 so the controller has sufficient torque to complete the pick-and-place task.

The lift was right at the 0.25 threshold boundary (0.250), causing flaky test failures. Increase gains to provide more margin.

The default change to ignore_inertial_definitions=False makes the FR3 Panda's rotational inertia tensors 2-4x larger (URDF-defined vs geometry-based). This caused the PD controller to become underdamped, leading to flaky test failures (success rate dropping from 0.94 to 0.69). Increase joint armature by ~50% to add virtual rotor inertia that stabilizes the dynamics under the higher link inertia. This restores the success rate to 0.94-1.0 without changing the PD gains.

nvtw

Looks good to me

@staticmethods

* [Warp Raytrace] Added device parameter (newton-physics#1544) * [Warp Raytrace] Added device parameter to previously overlooked call (newton-physics#1545) * SolverMuJoCo: Fix tolerance clamping in update_solver_options_kernel (newton-physics#1546) * Change default shape_ke to align with MuJoCo, parse geom solref from MJCF for contact stiffness/damping (newton-physics#1491) Signed-off-by: Alain Denzler <adenzler@nvidia.com> * Fix log_shapes broadcasting for length-1 warp arrays (newton-physics#1550) * Fix XPBD restitution particle index (newton-physics#1557) * Out-of-Bound memory read in example_diffsim_bear newton-physics#1386 (newton-physics#1533) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Add versioned documentation deployment to GitHub Pages (newton-physics#1560) * Fix broken documentation links after versioned docs deployment (newton-physics#1566) * VBD New Features (newton-physics#1479) Co-authored-by: Claude Sonnet 4.5 <noreply@anthropic.com> * Add banners to membership verification workflow steps (newton-physics#1569) * Support cable junctions (newton-physics#1519) Signed-off-by: JC <jumyungc@nvidia.com> * Rename parameter I to inertia newton-physics#1543 (newton-physics#1551) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Fix example_robot_anymal_c_walk.py (newton-physics#1574) * Change everywhere linesearch to iterative (newton-physics#1573) * Remove standard collision pipeline (newton-physics#1538) * USD Plumbing MJC solver attributes through resolver and custom attribute framework (newton-physics#1463) Signed-off-by: Milad Rakhsha <mrakhsha@nvidia.com> Signed-off-by: Milad-Rakhsha-NV <167464435+Milad-Rakhsha-NV@users.noreply.github.com> Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> * Fix child shape filtering (newton-physics#1559) * Fix ViewerRerun ignoring hidden parameter in log_mesh and log_instances (newton-physics#1555) * Make NxN and SAP broad phase respect filtered pairs (newton-physics#1554) * Add --quiet flag to examples to suppress Warp messages (newton-physics#1585) * Defer resolution of MESH_MAXHULLVERT default in importers (newton-physics#1587) * Fix TypeError when finalizing SDF geometry with device kwarg (newton-physics#1586) * Make MESH_MAXHULLVERT a static class attribute Mesh.MAX_HULL_VERTICES. (newton-physics#1598) * Significant non-determinism in unified collision pipeline for anymal_c_walking example newton-physics#1505 (newton-physics#1588) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Add test for non-contiguous case (newton-physics#1549) * Fix nightly Warp CI to resolve pre-release builds (newton-physics#1606) * Verify default class and value handling (newton-physics#1556) * SolverMuJoCo: Expand geom_margin to avoid OOB read with heterogeneous worlds (newton-physics#1607) * Fix bug in control clear method (newton-physics#1602) * Enable Use of Newton IK in Lab newton-physics#662 (newton-physics#1539) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Fix import of non-articulated joints (newton-physics#1535) * Deduplicate _process_joint_custom_attributes frequency handling (newton-physics#1584) * Add CI check for stale API docs and fix local build warnings (newton-physics#1570) * Update Pillow 12.0.0 to 12.1.1 (newton-physics#1612) * Prepare handling of mimic constraints in Newton (newton-physics#1523) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Support floating, base_joint and parent_body arguments for importers (newton-physics#1498) * Fix contact buffer memory overestimation (newton-physics#1614) * Configure banned-module-level-imports for ruff (newton-physics#1583) * Explicit `Contacts` instantiation with `Model.contacts()` and `CollisionPipeline.contacts()` (newton-physics#1445) * Fix the quadruped benchmark regression (newton-physics#1615) * Change default ignore_inertial_definitions from True to False (newton-physics#1537) * Finalize the Recording API (newton-physics#1600) * SolverMuJoCo: Fix ccd_iterations default (newton-physics#1631) * update gitignore to ignore Claude Code sandbox files (newton-physics#1628) * Add mimic joint support to SolverMuJoCo (newton-physics#1627) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Add --no-cache-clear flag to test runner (newton-physics#1629) * Update MuJoCo and MuJoCo Warp to 3.5.0 release (newton-physics#1633) * Improve inertia parsing from USD (newton-physics#1605) Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com> * Remove standalone .typos.toml in favor of pyproject.toml config (newton-physics#1642) * Heightfield support newton-physics#1189 (newton-physics#1547) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Example_robot_policy: Replace ValueError with clean error for missing PhysX policy (newton-physics#1636) Co-authored-by: Viktor Reutskyy <33062116+vreutskyy@users.noreply.github.com> * Avoid unnecessary inflation of the contact reduction voxel aabb (newton-physics#1650) * Rename num_worlds to world_count (newton-physics#1634) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Support parsing autolimits from MJCF (newton-physics#1651) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Fix particle-shape restitution ignoring body velocity (newton-physics#1273) (newton-physics#1580) * Add overflow warnings for narrow-phase collision buffers (newton-physics#1643) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Documentation: add units to model/state docstrings (newton-physics#1649) * fix(viewer): add missing JointType.BALL support to contact line kernel (newton-physics#1640) * Make terrain mesh visual-only in anymal C walking example (newton-physics#1660) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Fix initialization of collider state in MPM finite difference mode (newton-physics#1652) * docs: document ModelBuilder.default_shape_cfg (newton-physics#1662) * Finalize the collision API (newton-physics#1581) * Remove hardcoded subnet ID from AWS workflow (newton-physics#1664) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Attempt to fix AWS config (newton-physics#1666) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Update AWS workflows to g7e.2xlarge with multi-AZ failover (newton-physics#1669) * fix(viewer-usd): disambiguate log_points colors for N=3 warp arrays (newton-physics#1661) * Viewer gl optimizations (newton-physics#1656) Signed-off-by: Miles Macklin <mmacklin@nvidia.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> Co-authored-by: Eric Heiden <eheiden@nvidia.com> * docs: add articulation workflow guidance and regression check (newton-physics#1663) * fix(examples): propagate IK solution to model state in Franka example (newton-physics#1637) * fix(deps,docs): bump nbconvert to 7.17.0 and fix ArticulationView doctest (newton-physics#1670) * Cleanup and improve some example (newton-physics#1625) Signed-off-by: adenzler-nvidia <adenzler@nvidia.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> * Handle zero-mass bodies and flip ensure_nonstatic_links default (newton-physics#1635) * Additional testing for ArticulationView (newton-physics#1527) Co-authored-by: Eric Heiden <eheiden@nvidia.com> * Update warp-lang nightly to 1.12.0.dev20260217 (newton-physics#1677) * Change default friction coefficients to match MuJoCo (newton-physics#1681) * Refactor mesh creation functions (newton-physics#1654) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Parse joint frictionloss from MJCF (newton-physics#1680) * Fix free joint body_pos and add ref/qpos0 support for MuJoCo solver (newton-physics#1645) * Fix root shapes in ArticulationView with fixed base (newton-physics#1639) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Use model collision methods and remove `create_collision_pipeline` from examples (newton-physics#1648) Co-authored-by: nvtw <110816143+nvtw@users.noreply.github.com> * Fix XPBD apply_joint_forces ignoring child joint transform (newton-physics#1582) * Adjust SDF API (newton-physics#1644) Co-authored-by: Eric Heiden <eheiden@nvidia.com> * Optimize test suite runtime (~18% faster) (newton-physics#1689) * Remove ensure_nonstatic_links option from importers (newton-physics#1682) Signed-off-by: adenzler-nvidia <adenzler@nvidia.com> * SolverMuJoCo: Add geom_margin support, align thickness default with MuJoCo and schemas (newton-physics#1653) * refactor: privatize non-public solver internals (newton-physics#1683) * Fix option parsing with multiple <option> elements from includes (newton-physics#1692) * Bump warp-lang nightly and newton-usd-schemas (newton-physics#1693) * Get rid of tkinter dependency (newton-physics#1676) * Fix SDF example contact buffer overflow (newton-physics#1695) * Fix implicit biastype for position/velocity actuator shortcuts (newton-physics#1678) * Fix include processor to respect meshdir/texturedir (newton-physics#1685) * Reduce cold-cache Warp compile time for geometry modules (newton-physics#1618) Co-authored-by: Cursor <cursoragent@cursor.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> * Fix xyzw-to-wxyz quaternion conversion in body inertia kernel (newton-physics#1694) * Rename key to label and add hierarchical labels (newton-physics#1592) (newton-physics#1632) * Expose geometry SDF helpers on public API (newton-physics#1684) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Improve custom frequency handling from USD, parse MuJoCo actuators and tendons (newton-physics#1510) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Collapse fixed joints with non articulated bodies (newton-physics#1608) * Fix renaming joint_key -> joint_label (newton-physics#1700) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Bump .python-version from 3.11 to 3.12 (newton-physics#1702) * Replace CITATION.md with CITATION.cff (newton-physics#1706) * Respect MJCF contype=conaffinity=0 via collision_group=0 (newton-physics#1703) * Make ViewerUSD reuse existing USD layers for the same output path (newton-physics#1704) Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Remove dead up-axis conversion from MuJoCo solver (newton-physics#1707) * Skip IK cube stacking example test (newton-physics#1713) * Fix global pairs (world=-1) not exported to MuJoCo spec (newton-physics#1705) * Reduce the memory consumption of hydroelastic contacts (newton-physics#1609) * Fix flakiness cube stacking (newton-physics#1714) * Fix collision shapes not toggleable in viewer UI (newton-physics#1715) * Fix softbody examples table layout in README (newton-physics#1716) * Standardize sensor APIs: label matching, keyword args, and update() method naming (newton-physics#1665) * Fix intermittent crash in parallel test runner from Manager proxy race (newton-physics#1721) * Clean up inertia.py function arguments to match Mesh.create_* API (newton-physics#1719) * Reduce default test runner verbosity (newton-physics#1723) * Add menagerie comparison tests for SolverMuJoCo (newton-physics#1720) Signed-off-by: Alain Denzler <adenzler@nvidia.com> Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> Co-authored-by: Viktor Reutskyy <vreutskyy@nvidia.com> Co-authored-by: Viktor Reutskyy <33062116+vreutskyy@users.noreply.github.com> * Add spatial tendon support for MuJoCo solver (newton-physics#1687) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Expose qfrc_actuator from mujoco (newton-physics#1698) * Skip non-MODEL custom attributes in finalize validation (newton-physics#1734) * Resolve inheritrange for position actuators in MJCF parser (newton-physics#1727) * Support dampratio for position/velocity actuator shortcuts (newton-physics#1722) * Limit concurrency to 1 (newton-physics#1736) * Add a helper method for checking applied usd (newton-physics#1731) * Enhance playback URL handling in ViewerViser (newton-physics#1742) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Removed RenderShapeType (newton-physics#1748) * Override only MassAPI attributes that have been authored (newton-physics#1688) * Integration of newton-actuators (newton-physics#1342) Signed-off-by: jvonmuralt <jvonmuralt@nvidia.com> * Fix ArticulationView crash with fixed-joint-only articulations (newton-physics#1726) * Improve retrieval of Jupyter base URL in ViewerViser (newton-physics#1750) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Disable dynamics testing for UR5e and Apollo tests to avoid CI flakiness (newton-physics#1755) * Margin and Gap rename (newton-physics#1732) * Vbd Demos Fixing (newton-physics#1740) * Fix ViewerViser.log_lines method (newton-physics#1764) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Update warp-lang dependency to 1.12.0rc1 (newton-physics#1763) * Fix fromto capsule/cylinder orientation in MJCF parser (newton-physics#1741) * fix: multi-world particle BVH indexing (newton-physics#1641) Co-authored-by: Eric Heiden <eheiden@nvidia.com> * Clean up unused and internal-only kwargs in SolverMuJoCo (newton-physics#1766) * Parsing of the mimic joint and contact gap/margin from newton schemas (newton-physics#1690) Signed-off-by: Milad Rakhsha <mrakhsha@nvidia.com> * API Refactor v2 (newton-physics#1749) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Support explicit geom mass attributes in MJCF (newton-physics#1744) * Bump flask and werkzeug in lockfile for security (newton-physics#1769) Co-authored-by: Cursor <cursoragent@cursor.com> * Split MJCF worldbody root bodies into separate articulations (newton-physics#1754) * Expose VBD rigid contact forces for solver coupling (newton-physics#1745) Signed-off-by: JC <jumyungc@nvidia.com> * Add MJCF ellipsoid geom import and regression test (newton-physics#1772) Co-authored-by: Cursor <cursoragent@cursor.com> * Weld equality constraints parsed from mjcf are given Nan as the default value of torquescale. The correct default should be 1.0 (newton-physics#1760) * Improve picking accuracy and stability (newton-physics#1712) * Franka cloth demo improvement (newton-physics#1765) * Support computing sensing object transforms & API cleanup (newton-physics#1759) * Remove threading workaround (newton-physics#1751) * [Warp Raytrace] Consolidated ray intersect functions, renamed Options to Config (newton-physics#1767) * Improve README example gallery for PyPI compatibility (newton-physics#1776) * Fix issue with mesh in rerun viewer (newton-physics#1768) * Add PhysxMimicJointAPI parsing to USD importer (newton-physics#1735) * Move some math functions to Warp (newton-physics#1717) Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Add test to ensure MJCF xform argument is relative (newton-physics#1777) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Emit diaginertia instead of fullinertia for diagonal body inertia (newton-physics#1780) * Change default joint armature from 0.01 to 0 (newton-physics#1782) * Fix default kp/kv for position and velocity actuators (newton-physics#1786) * Lock body inertia after explicit MJCF <inertial> element (newton-physics#1784) * Fix for MJCF actuator custom attributes (newton-physics#1783) * Bump version to 0.2.3 Prepare the package metadata for the v0.2.3 release tag. * Fix ViewerRerun rendering of instances from hidden meshes (newton-physics#1788) * API cleanup (newton-physics#1789) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * BODY actuator target name bypasses body name de-duplication in SolverMuJoCo (newton-physics#1729) * Use default density for visual geoms in MJCF import (newton-physics#1781) * Fix GL viewer crash on Wayland (newton-physics#1793) * Make USD xform parameter control absolute articulation placement (newton-physics#1771) * Fix CUDA context corruption in SDF implementation (newton-physics#1792) * Bump mujoco-warp dependency to 3.5.0.2 (newton-physics#1779) * Fix MuJoCo margin/gap conversion (newton-physics#1785) * Bump version to 1.1.0.dev0 (newton-physics#1798) * Missing unittest.main added back to test_import_mjcf.py. Helps with F5 debugging in VS Code. (newton-physics#1796) * Improve H1 example (newton-physics#1801) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Fix ViewerViser.set_camera() (newton-physics#1805) * Rename examples to follow prefix-first naming convention (newton-physics#1802) * Improve MuJoCo actuator domain randomization (newton-physics#1773) * Restore in_cup test in hydro example (newton-physics#1775) * Fix `newton.geometry` imports and change of Mesh maxhullverts global constant * Adapt to having both margin and gap arrays for each geom/shape * Fix for newton.geometry API changes in primitive/narrowphase.py * Fix removal of `BroadPhaseMode` IntEnum and revert to newton-sytle string literals * WIP: Adapt geometry/unified.py to fix breaking changes to `newton.geometry` API * First pass of API adjustments * Patch more gaps (with respect to margin and gap renaming) * GeoType.SDF was removed - reflect that in Kamino * Introduce CoM position offsets w.r.t body frame and operations to convert between body CoM state and generic local body-fixed reference frames. * Add caching of per-entity labels/names/keys in the Model subcontainers * Remove SDF shape wrapper since it's now internal to mesh handling in CD pipelines * Fix USD test assets * Add Newton <--> Kamino joint type conversion operations and per-space default limit constants * Add some cleanup to geometry and unified CD + UTs * Add Newton <--> Kamino shape type conversion operations * Apply new default joint coord limit constants to limits.py * Adapt foubrar model builder and USD asset to produce the same result in sim example * Purge "physical" goems and collapse all into a single group, and purge geometry "layers" * Disable allocation per-joint wrenches by default and make them optional * Make `Model` a dataclass * Separate ModelData* containers into own `core/data.py` module * Fix imports of ModelData * Rename `Model` as `ModelKamino` * Rename `ModelData` as `DataKamino` * Rename `State` as `StateKamino` * Rename `Control` as `ControlKamino` * Rename `Limits` as `LimitsKamino` * Rename `Contacts` as `ContactsKamino` * Rename `ModelBuilder` as `ModelBuilderKamino` * Make imports in test utilities relative * Revise CD meta-data attributes and their computation in GeometryModel and ModelBuilderKamino * Revise primitive CD pipeline * Revise unified CD pipeline * Revise CD front-end interfaces * Fix UTs and relevant utils for interface changes to CD * Change to `wp.DeviceLike` to account for upcoming deprecation of `Devicelike` * Depracate legacy HDF5 data io (will be replaced in the future) * Fix banned imports at module level * Modify USD importer to detect articulations and order geoms and joints similarly to how the Newton `parse_usd` function does. * Add conversion operation from `newton.Model` to `ModelKamino` * Add data, state and control container conversions * Add SolverKamino wrapper that fullfils newton integration interface * Add newton integration examples * Add SolverKamino to newton solver module imports * WIP: fix problem with lambda_j being allocated for only kinematic constraints and failing on array copying * Fix banned git import in benchmark * Rename *Settings to *Config (#213) * Rename SolverKaminoSettings -> SolverKaminoConfig * Rename DualProblemSettings -> DualProblemConfig * Rename CollisionDetectorSettings -> CollisionDetectorConfig * Rename PADMMSettings -> PADMMConfig * Rename ForwardKinematicsSolverSettings -> ForwardKinematicsSolverConfig * Rename SimulatorSettings -> SimulatorConfig * Add check for model compatibility in SolverKamino (#209) * Fix device assignment in sparse CG test on CPU (#216) * Replace Enum-type config attributes with Literal (#215) * Replace warmstart mode config param with literal * Replace contact warmstart mode config param with literal * Replace rotation correction config param with literal * Replace penalty update config param with literal * Replace FK preconditioner option config param with literal * Add post-init checks for dual/PADMM configs * Rename FKPreconditionerOptions to FKPreconditionerType * Remove WorldDescriptor from ModelKamino (#219) * Add geom index offset array to model info * Replace access to world description in model * Remove world descriptor from model * Fix computation of kinematics residual with sparse Jacobian (#220) * Migrates `ModelKaminoSize` to it's own module to avoid circular dependency between core/model.py and core/state.py and rename it as `SizeKamino`. * WIP: Fix SolverKamino wrapper * Fix circular dependency in conversions.py * Fix some broken unit tests and WIP to fix fourbar contact conversions and rendering * Make some conversions @staticmethods instead, because they dont need common class attributes * Fix declaration of custom state attributes and their conversion to/from newton and kamino * WIP: Debug model conversion and newton sim examples * Rename and cleanup start index array of per-world geoms * Model conversion and newton sim examples now work. * Make gravity conversion operation re-usable * Migrates boxes_fourbar builder using newton.ModelBuilder to it's own module to prepare for migration. * Use gravity conversion utility func in SolverKamino * Add reusable joint-parameterization conversion utility * Remove world-descriptor from model converter * Rename helper converter that handles entity-local transforms * Add some cleanup to DR Legs, ANYmal D and basic four-bar examples * Fix module-level imports of additional kamino-specific development dependencies * Fix module-level imports of additional kamino-specific development dependencies * Fix erroneous merge conflict. --------- Signed-off-by: Alain Denzler <adenzler@nvidia.com> Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> Signed-off-by: JC <jumyungc@nvidia.com> Signed-off-by: Milad Rakhsha <mrakhsha@nvidia.com> Signed-off-by: Milad-Rakhsha-NV <167464435+Milad-Rakhsha-NV@users.noreply.github.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Miles Macklin <mmacklin@nvidia.com> Signed-off-by: adenzler-nvidia <adenzler@nvidia.com> Signed-off-by: jvonmuralt <jvonmuralt@nvidia.com> Co-authored-by: Daniela Hase <116915287+daniela-hase@users.noreply.github.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> Co-authored-by: Viktor Reutskyy <33062116+vreutskyy@users.noreply.github.com> Co-authored-by: Eric Shi <97630937+shi-eric@users.noreply.github.com> Co-authored-by: Anka Chen <AnkaChan@users.noreply.github.com> Co-authored-by: Claude Sonnet 4.5 <noreply@anthropic.com> Co-authored-by: JC-nvidia <116605903+jumyungc@users.noreply.github.com> Co-authored-by: Kenny Vilella <kvilella@nvidia.com> Co-authored-by: nvtw <110816143+nvtw@users.noreply.github.com> Co-authored-by: Milad-Rakhsha-NV <167464435+Milad-Rakhsha-NV@users.noreply.github.com> Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com> Co-authored-by: Lennart Röstel <65088822+lenroe@users.noreply.github.com> Co-authored-by: Eric Heiden <eheiden@nvidia.com> Co-authored-by: jvonmuralt <jvonmuralt@nvidia.com> Co-authored-by: camevor <camevor@nvidia.com> Co-authored-by: mzamoramora-nvidia <mzamoramora@nvidia.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com> Co-authored-by: Alessandro Roncone <alecive87@gmail.com> Co-authored-by: gdaviet <57617656+gdaviet@users.noreply.github.com> Co-authored-by: Miles Macklin <mmacklin@nvidia.com> Co-authored-by: Gordon Yeoman <gyeomannvidia@users.noreply.github.com> Co-authored-by: Lukasz Wawrzyniak <lwawrzyniak@nvidia.com> Co-authored-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Cursor <cursoragent@cursor.com> Co-authored-by: Viktor Reutskyy <vreutskyy@nvidia.com> Co-authored-by: Lorenzo Terenzi <lorenzoterenzi96@gmail.com> Co-authored-by: smollerNV <164020096+smollerNV@users.noreply.github.com> Co-authored-by: twidmer <twidmer@nvidia.com> Co-authored-by: Christian Schumacher <christian.schumacher@disney.com> Co-authored-by: Guirec-Maloisel <25688871+Guirec-Maloisel@users.noreply.github.com>

@staticmethods

* [Warp Raytrace] Added device parameter (newton-physics#1544) * [Warp Raytrace] Added device parameter to previously overlooked call (newton-physics#1545) * SolverMuJoCo: Fix tolerance clamping in update_solver_options_kernel (newton-physics#1546) * Change default shape_ke to align with MuJoCo, parse geom solref from MJCF for contact stiffness/damping (newton-physics#1491) Signed-off-by: Alain Denzler <adenzler@nvidia.com> * Fix log_shapes broadcasting for length-1 warp arrays (newton-physics#1550) * Fix XPBD restitution particle index (newton-physics#1557) * Out-of-Bound memory read in example_diffsim_bear newton-physics#1386 (newton-physics#1533) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Add versioned documentation deployment to GitHub Pages (newton-physics#1560) * Fix broken documentation links after versioned docs deployment (newton-physics#1566) * VBD New Features (newton-physics#1479) Co-authored-by: Claude Sonnet 4.5 <noreply@anthropic.com> * Add banners to membership verification workflow steps (newton-physics#1569) * Support cable junctions (newton-physics#1519) Signed-off-by: JC <jumyungc@nvidia.com> * Rename parameter I to inertia newton-physics#1543 (newton-physics#1551) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Fix example_robot_anymal_c_walk.py (newton-physics#1574) * Change everywhere linesearch to iterative (newton-physics#1573) * Remove standard collision pipeline (newton-physics#1538) * USD Plumbing MJC solver attributes through resolver and custom attribute framework (newton-physics#1463) Signed-off-by: Milad Rakhsha <mrakhsha@nvidia.com> Signed-off-by: Milad-Rakhsha-NV <167464435+Milad-Rakhsha-NV@users.noreply.github.com> Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> * Fix child shape filtering (newton-physics#1559) * Fix ViewerRerun ignoring hidden parameter in log_mesh and log_instances (newton-physics#1555) * Make NxN and SAP broad phase respect filtered pairs (newton-physics#1554) * Add --quiet flag to examples to suppress Warp messages (newton-physics#1585) * Defer resolution of MESH_MAXHULLVERT default in importers (newton-physics#1587) * Fix TypeError when finalizing SDF geometry with device kwarg (newton-physics#1586) * Make MESH_MAXHULLVERT a static class attribute Mesh.MAX_HULL_VERTICES. (newton-physics#1598) * Significant non-determinism in unified collision pipeline for anymal_c_walking example newton-physics#1505 (newton-physics#1588) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Add test for non-contiguous case (newton-physics#1549) * Fix nightly Warp CI to resolve pre-release builds (newton-physics#1606) * Verify default class and value handling (newton-physics#1556) * SolverMuJoCo: Expand geom_margin to avoid OOB read with heterogeneous worlds (newton-physics#1607) * Fix bug in control clear method (newton-physics#1602) * Enable Use of Newton IK in Lab newton-physics#662 (newton-physics#1539) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Fix import of non-articulated joints (newton-physics#1535) * Deduplicate _process_joint_custom_attributes frequency handling (newton-physics#1584) * Add CI check for stale API docs and fix local build warnings (newton-physics#1570) * Update Pillow 12.0.0 to 12.1.1 (newton-physics#1612) * Prepare handling of mimic constraints in Newton (newton-physics#1523) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Support floating, base_joint and parent_body arguments for importers (newton-physics#1498) * Fix contact buffer memory overestimation (newton-physics#1614) * Configure banned-module-level-imports for ruff (newton-physics#1583) * Explicit `Contacts` instantiation with `Model.contacts()` and `CollisionPipeline.contacts()` (newton-physics#1445) * Fix the quadruped benchmark regression (newton-physics#1615) * Change default ignore_inertial_definitions from True to False (newton-physics#1537) * Finalize the Recording API (newton-physics#1600) * SolverMuJoCo: Fix ccd_iterations default (newton-physics#1631) * update gitignore to ignore Claude Code sandbox files (newton-physics#1628) * Add mimic joint support to SolverMuJoCo (newton-physics#1627) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Add --no-cache-clear flag to test runner (newton-physics#1629) * Update MuJoCo and MuJoCo Warp to 3.5.0 release (newton-physics#1633) * Improve inertia parsing from USD (newton-physics#1605) Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com> * Remove standalone .typos.toml in favor of pyproject.toml config (newton-physics#1642) * Heightfield support newton-physics#1189 (newton-physics#1547) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Example_robot_policy: Replace ValueError with clean error for missing PhysX policy (newton-physics#1636) Co-authored-by: Viktor Reutskyy <33062116+vreutskyy@users.noreply.github.com> * Avoid unnecessary inflation of the contact reduction voxel aabb (newton-physics#1650) * Rename num_worlds to world_count (newton-physics#1634) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Support parsing autolimits from MJCF (newton-physics#1651) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Fix particle-shape restitution ignoring body velocity (newton-physics#1273) (newton-physics#1580) * Add overflow warnings for narrow-phase collision buffers (newton-physics#1643) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Documentation: add units to model/state docstrings (newton-physics#1649) * fix(viewer): add missing JointType.BALL support to contact line kernel (newton-physics#1640) * Make terrain mesh visual-only in anymal C walking example (newton-physics#1660) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Fix initialization of collider state in MPM finite difference mode (newton-physics#1652) * docs: document ModelBuilder.default_shape_cfg (newton-physics#1662) * Finalize the collision API (newton-physics#1581) * Remove hardcoded subnet ID from AWS workflow (newton-physics#1664) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Attempt to fix AWS config (newton-physics#1666) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Update AWS workflows to g7e.2xlarge with multi-AZ failover (newton-physics#1669) * fix(viewer-usd): disambiguate log_points colors for N=3 warp arrays (newton-physics#1661) * Viewer gl optimizations (newton-physics#1656) Signed-off-by: Miles Macklin <mmacklin@nvidia.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> Co-authored-by: Eric Heiden <eheiden@nvidia.com> * docs: add articulation workflow guidance and regression check (newton-physics#1663) * fix(examples): propagate IK solution to model state in Franka example (newton-physics#1637) * fix(deps,docs): bump nbconvert to 7.17.0 and fix ArticulationView doctest (newton-physics#1670) * Cleanup and improve some example (newton-physics#1625) Signed-off-by: adenzler-nvidia <adenzler@nvidia.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> * Handle zero-mass bodies and flip ensure_nonstatic_links default (newton-physics#1635) * Additional testing for ArticulationView (newton-physics#1527) Co-authored-by: Eric Heiden <eheiden@nvidia.com> * Update warp-lang nightly to 1.12.0.dev20260217 (newton-physics#1677) * Change default friction coefficients to match MuJoCo (newton-physics#1681) * Refactor mesh creation functions (newton-physics#1654) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Parse joint frictionloss from MJCF (newton-physics#1680) * Fix free joint body_pos and add ref/qpos0 support for MuJoCo solver (newton-physics#1645) * Fix root shapes in ArticulationView with fixed base (newton-physics#1639) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Use model collision methods and remove `create_collision_pipeline` from examples (newton-physics#1648) Co-authored-by: nvtw <110816143+nvtw@users.noreply.github.com> * Fix XPBD apply_joint_forces ignoring child joint transform (newton-physics#1582) * Adjust SDF API (newton-physics#1644) Co-authored-by: Eric Heiden <eheiden@nvidia.com> * Optimize test suite runtime (~18% faster) (newton-physics#1689) * Remove ensure_nonstatic_links option from importers (newton-physics#1682) Signed-off-by: adenzler-nvidia <adenzler@nvidia.com> * SolverMuJoCo: Add geom_margin support, align thickness default with MuJoCo and schemas (newton-physics#1653) * refactor: privatize non-public solver internals (newton-physics#1683) * Fix option parsing with multiple <option> elements from includes (newton-physics#1692) * Bump warp-lang nightly and newton-usd-schemas (newton-physics#1693) * Get rid of tkinter dependency (newton-physics#1676) * Fix SDF example contact buffer overflow (newton-physics#1695) * Fix implicit biastype for position/velocity actuator shortcuts (newton-physics#1678) * Fix include processor to respect meshdir/texturedir (newton-physics#1685) * Reduce cold-cache Warp compile time for geometry modules (newton-physics#1618) Co-authored-by: Cursor <cursoragent@cursor.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> * Fix xyzw-to-wxyz quaternion conversion in body inertia kernel (newton-physics#1694) * Rename key to label and add hierarchical labels (newton-physics#1592) (newton-physics#1632) * Expose geometry SDF helpers on public API (newton-physics#1684) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Improve custom frequency handling from USD, parse MuJoCo actuators and tendons (newton-physics#1510) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Collapse fixed joints with non articulated bodies (newton-physics#1608) * Fix renaming joint_key -> joint_label (newton-physics#1700) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Bump .python-version from 3.11 to 3.12 (newton-physics#1702) * Replace CITATION.md with CITATION.cff (newton-physics#1706) * Respect MJCF contype=conaffinity=0 via collision_group=0 (newton-physics#1703) * Make ViewerUSD reuse existing USD layers for the same output path (newton-physics#1704) Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Remove dead up-axis conversion from MuJoCo solver (newton-physics#1707) * Skip IK cube stacking example test (newton-physics#1713) * Fix global pairs (world=-1) not exported to MuJoCo spec (newton-physics#1705) * Reduce the memory consumption of hydroelastic contacts (newton-physics#1609) * Fix flakiness cube stacking (newton-physics#1714) * Fix collision shapes not toggleable in viewer UI (newton-physics#1715) * Fix softbody examples table layout in README (newton-physics#1716) * Standardize sensor APIs: label matching, keyword args, and update() method naming (newton-physics#1665) * Fix intermittent crash in parallel test runner from Manager proxy race (newton-physics#1721) * Clean up inertia.py function arguments to match Mesh.create_* API (newton-physics#1719) * Reduce default test runner verbosity (newton-physics#1723) * Add menagerie comparison tests for SolverMuJoCo (newton-physics#1720) Signed-off-by: Alain Denzler <adenzler@nvidia.com> Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> Co-authored-by: Viktor Reutskyy <vreutskyy@nvidia.com> Co-authored-by: Viktor Reutskyy <33062116+vreutskyy@users.noreply.github.com> * Add spatial tendon support for MuJoCo solver (newton-physics#1687) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Expose qfrc_actuator from mujoco (newton-physics#1698) * Skip non-MODEL custom attributes in finalize validation (newton-physics#1734) * Resolve inheritrange for position actuators in MJCF parser (newton-physics#1727) * Support dampratio for position/velocity actuator shortcuts (newton-physics#1722) * Limit concurrency to 1 (newton-physics#1736) * Add a helper method for checking applied usd (newton-physics#1731) * Enhance playback URL handling in ViewerViser (newton-physics#1742) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Removed RenderShapeType (newton-physics#1748) * Override only MassAPI attributes that have been authored (newton-physics#1688) * Integration of newton-actuators (newton-physics#1342) Signed-off-by: jvonmuralt <jvonmuralt@nvidia.com> * Fix ArticulationView crash with fixed-joint-only articulations (newton-physics#1726) * Improve retrieval of Jupyter base URL in ViewerViser (newton-physics#1750) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Disable dynamics testing for UR5e and Apollo tests to avoid CI flakiness (newton-physics#1755) * Margin and Gap rename (newton-physics#1732) * Vbd Demos Fixing (newton-physics#1740) * Fix ViewerViser.log_lines method (newton-physics#1764) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Update warp-lang dependency to 1.12.0rc1 (newton-physics#1763) * Fix fromto capsule/cylinder orientation in MJCF parser (newton-physics#1741) * fix: multi-world particle BVH indexing (newton-physics#1641) Co-authored-by: Eric Heiden <eheiden@nvidia.com> * Clean up unused and internal-only kwargs in SolverMuJoCo (newton-physics#1766) * Parsing of the mimic joint and contact gap/margin from newton schemas (newton-physics#1690) Signed-off-by: Milad Rakhsha <mrakhsha@nvidia.com> * API Refactor v2 (newton-physics#1749) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Support explicit geom mass attributes in MJCF (newton-physics#1744) * Bump flask and werkzeug in lockfile for security (newton-physics#1769) Co-authored-by: Cursor <cursoragent@cursor.com> * Split MJCF worldbody root bodies into separate articulations (newton-physics#1754) * Expose VBD rigid contact forces for solver coupling (newton-physics#1745) Signed-off-by: JC <jumyungc@nvidia.com> * Add MJCF ellipsoid geom import and regression test (newton-physics#1772) Co-authored-by: Cursor <cursoragent@cursor.com> * Weld equality constraints parsed from mjcf are given Nan as the default value of torquescale. The correct default should be 1.0 (newton-physics#1760) * Improve picking accuracy and stability (newton-physics#1712) * Franka cloth demo improvement (newton-physics#1765) * Support computing sensing object transforms & API cleanup (newton-physics#1759) * Remove threading workaround (newton-physics#1751) * [Warp Raytrace] Consolidated ray intersect functions, renamed Options to Config (newton-physics#1767) * Improve README example gallery for PyPI compatibility (newton-physics#1776) * Fix issue with mesh in rerun viewer (newton-physics#1768) * Add PhysxMimicJointAPI parsing to USD importer (newton-physics#1735) * Move some math functions to Warp (newton-physics#1717) Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Add test to ensure MJCF xform argument is relative (newton-physics#1777) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Emit diaginertia instead of fullinertia for diagonal body inertia (newton-physics#1780) * Change default joint armature from 0.01 to 0 (newton-physics#1782) * Fix default kp/kv for position and velocity actuators (newton-physics#1786) * Lock body inertia after explicit MJCF <inertial> element (newton-physics#1784) * Fix for MJCF actuator custom attributes (newton-physics#1783) * Bump version to 0.2.3 Prepare the package metadata for the v0.2.3 release tag. * Fix ViewerRerun rendering of instances from hidden meshes (newton-physics#1788) * API cleanup (newton-physics#1789) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * BODY actuator target name bypasses body name de-duplication in SolverMuJoCo (newton-physics#1729) * Use default density for visual geoms in MJCF import (newton-physics#1781) * Fix GL viewer crash on Wayland (newton-physics#1793) * Make USD xform parameter control absolute articulation placement (newton-physics#1771) * Fix CUDA context corruption in SDF implementation (newton-physics#1792) * Bump mujoco-warp dependency to 3.5.0.2 (newton-physics#1779) * Fix MuJoCo margin/gap conversion (newton-physics#1785) * Bump version to 1.1.0.dev0 (newton-physics#1798) * Missing unittest.main added back to test_import_mjcf.py. Helps with F5 debugging in VS Code. (newton-physics#1796) * Improve H1 example (newton-physics#1801) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Fix ViewerViser.set_camera() (newton-physics#1805) * Rename examples to follow prefix-first naming convention (newton-physics#1802) * Improve MuJoCo actuator domain randomization (newton-physics#1773) * Restore in_cup test in hydro example (newton-physics#1775) * Fix `newton.geometry` imports and change of Mesh maxhullverts global constant * Adapt to having both margin and gap arrays for each geom/shape * Fix for newton.geometry API changes in primitive/narrowphase.py * Fix removal of `BroadPhaseMode` IntEnum and revert to newton-sytle string literals * WIP: Adapt geometry/unified.py to fix breaking changes to `newton.geometry` API * First pass of API adjustments * Patch more gaps (with respect to margin and gap renaming) * GeoType.SDF was removed - reflect that in Kamino * Introduce CoM position offsets w.r.t body frame and operations to convert between body CoM state and generic local body-fixed reference frames. * Add caching of per-entity labels/names/keys in the Model subcontainers * Remove SDF shape wrapper since it's now internal to mesh handling in CD pipelines * Fix USD test assets * Add Newton <--> Kamino joint type conversion operations and per-space default limit constants * Add some cleanup to geometry and unified CD + UTs * Add Newton <--> Kamino shape type conversion operations * Apply new default joint coord limit constants to limits.py * Adapt foubrar model builder and USD asset to produce the same result in sim example * Purge "physical" goems and collapse all into a single group, and purge geometry "layers" * Disable allocation per-joint wrenches by default and make them optional * Make `Model` a dataclass * Separate ModelData* containers into own `core/data.py` module * Fix imports of ModelData * Rename `Model` as `ModelKamino` * Rename `ModelData` as `DataKamino` * Rename `State` as `StateKamino` * Rename `Control` as `ControlKamino` * Rename `Limits` as `LimitsKamino` * Rename `Contacts` as `ContactsKamino` * Rename `ModelBuilder` as `ModelBuilderKamino` * Make imports in test utilities relative * Revise CD meta-data attributes and their computation in GeometryModel and ModelBuilderKamino * Revise primitive CD pipeline * Revise unified CD pipeline * Revise CD front-end interfaces * Fix UTs and relevant utils for interface changes to CD * Change to `wp.DeviceLike` to account for upcoming deprecation of `Devicelike` * Depracate legacy HDF5 data io (will be replaced in the future) * Fix banned imports at module level * Modify USD importer to detect articulations and order geoms and joints similarly to how the Newton `parse_usd` function does. * Add conversion operation from `newton.Model` to `ModelKamino` * Add data, state and control container conversions * Add SolverKamino wrapper that fullfils newton integration interface * Add newton integration examples * Add SolverKamino to newton solver module imports * WIP: fix problem with lambda_j being allocated for only kinematic constraints and failing on array copying * Fix banned git import in benchmark * Rename *Settings to *Config (#213) * Rename SolverKaminoSettings -> SolverKaminoConfig * Rename DualProblemSettings -> DualProblemConfig * Rename CollisionDetectorSettings -> CollisionDetectorConfig * Rename PADMMSettings -> PADMMConfig * Rename ForwardKinematicsSolverSettings -> ForwardKinematicsSolverConfig * Rename SimulatorSettings -> SimulatorConfig * Add check for model compatibility in SolverKamino (#209) * Fix device assignment in sparse CG test on CPU (#216) * Replace Enum-type config attributes with Literal (#215) * Replace warmstart mode config param with literal * Replace contact warmstart mode config param with literal * Replace rotation correction config param with literal * Replace penalty update config param with literal * Replace FK preconditioner option config param with literal * Add post-init checks for dual/PADMM configs * Rename FKPreconditionerOptions to FKPreconditionerType * Remove WorldDescriptor from ModelKamino (#219) * Add geom index offset array to model info * Replace access to world description in model * Remove world descriptor from model * Fix computation of kinematics residual with sparse Jacobian (#220) * Migrates `ModelKaminoSize` to it's own module to avoid circular dependency between core/model.py and core/state.py and rename it as `SizeKamino`. * WIP: Fix SolverKamino wrapper * Fix circular dependency in conversions.py * Fix some broken unit tests and WIP to fix fourbar contact conversions and rendering * Make some conversions @staticmethods instead, because they dont need common class attributes * Fix declaration of custom state attributes and their conversion to/from newton and kamino * WIP: Debug model conversion and newton sim examples * Rename and cleanup start index array of per-world geoms * Model conversion and newton sim examples now work. * Make gravity conversion operation re-usable * Migrates boxes_fourbar builder using newton.ModelBuilder to it's own module to prepare for migration. * Use gravity conversion utility func in SolverKamino * Add reusable joint-parameterization conversion utility * Remove world-descriptor from model converter * Rename helper converter that handles entity-local transforms * Add some cleanup to DR Legs, ANYmal D and basic four-bar examples * Fix module-level imports of additional kamino-specific development dependencies * Fix module-level imports of additional kamino-specific development dependencies * Fix erroneous merge conflict. --------- Signed-off-by: Alain Denzler <adenzler@nvidia.com> Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> Signed-off-by: JC <jumyungc@nvidia.com> Signed-off-by: Milad Rakhsha <mrakhsha@nvidia.com> Signed-off-by: Milad-Rakhsha-NV <167464435+Milad-Rakhsha-NV@users.noreply.github.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Miles Macklin <mmacklin@nvidia.com> Signed-off-by: adenzler-nvidia <adenzler@nvidia.com> Signed-off-by: jvonmuralt <jvonmuralt@nvidia.com> Co-authored-by: Daniela Hase <116915287+daniela-hase@users.noreply.github.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> Co-authored-by: Viktor Reutskyy <33062116+vreutskyy@users.noreply.github.com> Co-authored-by: Eric Shi <97630937+shi-eric@users.noreply.github.com> Co-authored-by: Anka Chen <AnkaChan@users.noreply.github.com> Co-authored-by: Claude Sonnet 4.5 <noreply@anthropic.com> Co-authored-by: JC-nvidia <116605903+jumyungc@users.noreply.github.com> Co-authored-by: Kenny Vilella <kvilella@nvidia.com> Co-authored-by: nvtw <110816143+nvtw@users.noreply.github.com> Co-authored-by: Milad-Rakhsha-NV <167464435+Milad-Rakhsha-NV@users.noreply.github.com> Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com> Co-authored-by: Lennart Röstel <65088822+lenroe@users.noreply.github.com> Co-authored-by: Eric Heiden <eheiden@nvidia.com> Co-authored-by: jvonmuralt <jvonmuralt@nvidia.com> Co-authored-by: camevor <camevor@nvidia.com> Co-authored-by: mzamoramora-nvidia <mzamoramora@nvidia.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com> Co-authored-by: Alessandro Roncone <alecive87@gmail.com> Co-authored-by: gdaviet <57617656+gdaviet@users.noreply.github.com> Co-authored-by: Miles Macklin <mmacklin@nvidia.com> Co-authored-by: Gordon Yeoman <gyeomannvidia@users.noreply.github.com> Co-authored-by: Lukasz Wawrzyniak <lwawrzyniak@nvidia.com> Co-authored-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Cursor <cursoragent@cursor.com> Co-authored-by: Viktor Reutskyy <vreutskyy@nvidia.com> Co-authored-by: Lorenzo Terenzi <lorenzoterenzi96@gmail.com> Co-authored-by: smollerNV <164020096+smollerNV@users.noreply.github.com> Co-authored-by: twidmer <twidmer@nvidia.com> Co-authored-by: Christian Schumacher <christian.schumacher@disney.com> Co-authored-by: Guirec-Maloisel <25688871+Guirec-Maloisel@users.noreply.github.com>

@staticmethods

* [Warp Raytrace] Added device parameter (newton-physics#1544) * [Warp Raytrace] Added device parameter to previously overlooked call (newton-physics#1545) * SolverMuJoCo: Fix tolerance clamping in update_solver_options_kernel (newton-physics#1546) * Change default shape_ke to align with MuJoCo, parse geom solref from MJCF for contact stiffness/damping (newton-physics#1491) Signed-off-by: Alain Denzler <adenzler@nvidia.com> * Fix log_shapes broadcasting for length-1 warp arrays (newton-physics#1550) * Fix XPBD restitution particle index (newton-physics#1557) * Out-of-Bound memory read in example_diffsim_bear newton-physics#1386 (newton-physics#1533) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Add versioned documentation deployment to GitHub Pages (newton-physics#1560) * Fix broken documentation links after versioned docs deployment (newton-physics#1566) * VBD New Features (newton-physics#1479) Co-authored-by: Claude Sonnet 4.5 <noreply@anthropic.com> * Add banners to membership verification workflow steps (newton-physics#1569) * Support cable junctions (newton-physics#1519) Signed-off-by: JC <jumyungc@nvidia.com> * Rename parameter I to inertia newton-physics#1543 (newton-physics#1551) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Fix example_robot_anymal_c_walk.py (newton-physics#1574) * Change everywhere linesearch to iterative (newton-physics#1573) * Remove standard collision pipeline (newton-physics#1538) * USD Plumbing MJC solver attributes through resolver and custom attribute framework (newton-physics#1463) Signed-off-by: Milad Rakhsha <mrakhsha@nvidia.com> Signed-off-by: Milad-Rakhsha-NV <167464435+Milad-Rakhsha-NV@users.noreply.github.com> Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> * Fix child shape filtering (newton-physics#1559) * Fix ViewerRerun ignoring hidden parameter in log_mesh and log_instances (newton-physics#1555) * Make NxN and SAP broad phase respect filtered pairs (newton-physics#1554) * Add --quiet flag to examples to suppress Warp messages (newton-physics#1585) * Defer resolution of MESH_MAXHULLVERT default in importers (newton-physics#1587) * Fix TypeError when finalizing SDF geometry with device kwarg (newton-physics#1586) * Make MESH_MAXHULLVERT a static class attribute Mesh.MAX_HULL_VERTICES. (newton-physics#1598) * Significant non-determinism in unified collision pipeline for anymal_c_walking example newton-physics#1505 (newton-physics#1588) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Add test for non-contiguous case (newton-physics#1549) * Fix nightly Warp CI to resolve pre-release builds (newton-physics#1606) * Verify default class and value handling (newton-physics#1556) * SolverMuJoCo: Expand geom_margin to avoid OOB read with heterogeneous worlds (newton-physics#1607) * Fix bug in control clear method (newton-physics#1602) * Enable Use of Newton IK in Lab newton-physics#662 (newton-physics#1539) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Fix import of non-articulated joints (newton-physics#1535) * Deduplicate _process_joint_custom_attributes frequency handling (newton-physics#1584) * Add CI check for stale API docs and fix local build warnings (newton-physics#1570) * Update Pillow 12.0.0 to 12.1.1 (newton-physics#1612) * Prepare handling of mimic constraints in Newton (newton-physics#1523) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Support floating, base_joint and parent_body arguments for importers (newton-physics#1498) * Fix contact buffer memory overestimation (newton-physics#1614) * Configure banned-module-level-imports for ruff (newton-physics#1583) * Explicit `Contacts` instantiation with `Model.contacts()` and `CollisionPipeline.contacts()` (newton-physics#1445) * Fix the quadruped benchmark regression (newton-physics#1615) * Change default ignore_inertial_definitions from True to False (newton-physics#1537) * Finalize the Recording API (newton-physics#1600) * SolverMuJoCo: Fix ccd_iterations default (newton-physics#1631) * update gitignore to ignore Claude Code sandbox files (newton-physics#1628) * Add mimic joint support to SolverMuJoCo (newton-physics#1627) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Add --no-cache-clear flag to test runner (newton-physics#1629) * Update MuJoCo and MuJoCo Warp to 3.5.0 release (newton-physics#1633) * Improve inertia parsing from USD (newton-physics#1605) Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com> * Remove standalone .typos.toml in favor of pyproject.toml config (newton-physics#1642) * Heightfield support newton-physics#1189 (newton-physics#1547) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Example_robot_policy: Replace ValueError with clean error for missing PhysX policy (newton-physics#1636) Co-authored-by: Viktor Reutskyy <33062116+vreutskyy@users.noreply.github.com> * Avoid unnecessary inflation of the contact reduction voxel aabb (newton-physics#1650) * Rename num_worlds to world_count (newton-physics#1634) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Support parsing autolimits from MJCF (newton-physics#1651) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Fix particle-shape restitution ignoring body velocity (newton-physics#1273) (newton-physics#1580) * Add overflow warnings for narrow-phase collision buffers (newton-physics#1643) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Documentation: add units to model/state docstrings (newton-physics#1649) * fix(viewer): add missing JointType.BALL support to contact line kernel (newton-physics#1640) * Make terrain mesh visual-only in anymal C walking example (newton-physics#1660) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Fix initialization of collider state in MPM finite difference mode (newton-physics#1652) * docs: document ModelBuilder.default_shape_cfg (newton-physics#1662) * Finalize the collision API (newton-physics#1581) * Remove hardcoded subnet ID from AWS workflow (newton-physics#1664) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Attempt to fix AWS config (newton-physics#1666) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Update AWS workflows to g7e.2xlarge with multi-AZ failover (newton-physics#1669) * fix(viewer-usd): disambiguate log_points colors for N=3 warp arrays (newton-physics#1661) * Viewer gl optimizations (newton-physics#1656) Signed-off-by: Miles Macklin <mmacklin@nvidia.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> Co-authored-by: Eric Heiden <eheiden@nvidia.com> * docs: add articulation workflow guidance and regression check (newton-physics#1663) * fix(examples): propagate IK solution to model state in Franka example (newton-physics#1637) * fix(deps,docs): bump nbconvert to 7.17.0 and fix ArticulationView doctest (newton-physics#1670) * Cleanup and improve some example (newton-physics#1625) Signed-off-by: adenzler-nvidia <adenzler@nvidia.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> * Handle zero-mass bodies and flip ensure_nonstatic_links default (newton-physics#1635) * Additional testing for ArticulationView (newton-physics#1527) Co-authored-by: Eric Heiden <eheiden@nvidia.com> * Update warp-lang nightly to 1.12.0.dev20260217 (newton-physics#1677) * Change default friction coefficients to match MuJoCo (newton-physics#1681) * Refactor mesh creation functions (newton-physics#1654) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Parse joint frictionloss from MJCF (newton-physics#1680) * Fix free joint body_pos and add ref/qpos0 support for MuJoCo solver (newton-physics#1645) * Fix root shapes in ArticulationView with fixed base (newton-physics#1639) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Use model collision methods and remove `create_collision_pipeline` from examples (newton-physics#1648) Co-authored-by: nvtw <110816143+nvtw@users.noreply.github.com> * Fix XPBD apply_joint_forces ignoring child joint transform (newton-physics#1582) * Adjust SDF API (newton-physics#1644) Co-authored-by: Eric Heiden <eheiden@nvidia.com> * Optimize test suite runtime (~18% faster) (newton-physics#1689) * Remove ensure_nonstatic_links option from importers (newton-physics#1682) Signed-off-by: adenzler-nvidia <adenzler@nvidia.com> * SolverMuJoCo: Add geom_margin support, align thickness default with MuJoCo and schemas (newton-physics#1653) * refactor: privatize non-public solver internals (newton-physics#1683) * Fix option parsing with multiple <option> elements from includes (newton-physics#1692) * Bump warp-lang nightly and newton-usd-schemas (newton-physics#1693) * Get rid of tkinter dependency (newton-physics#1676) * Fix SDF example contact buffer overflow (newton-physics#1695) * Fix implicit biastype for position/velocity actuator shortcuts (newton-physics#1678) * Fix include processor to respect meshdir/texturedir (newton-physics#1685) * Reduce cold-cache Warp compile time for geometry modules (newton-physics#1618) Co-authored-by: Cursor <cursoragent@cursor.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> * Fix xyzw-to-wxyz quaternion conversion in body inertia kernel (newton-physics#1694) * Rename key to label and add hierarchical labels (newton-physics#1592) (newton-physics#1632) * Expose geometry SDF helpers on public API (newton-physics#1684) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Improve custom frequency handling from USD, parse MuJoCo actuators and tendons (newton-physics#1510) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Collapse fixed joints with non articulated bodies (newton-physics#1608) * Fix renaming joint_key -> joint_label (newton-physics#1700) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Bump .python-version from 3.11 to 3.12 (newton-physics#1702) * Replace CITATION.md with CITATION.cff (newton-physics#1706) * Respect MJCF contype=conaffinity=0 via collision_group=0 (newton-physics#1703) * Make ViewerUSD reuse existing USD layers for the same output path (newton-physics#1704) Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Remove dead up-axis conversion from MuJoCo solver (newton-physics#1707) * Skip IK cube stacking example test (newton-physics#1713) * Fix global pairs (world=-1) not exported to MuJoCo spec (newton-physics#1705) * Reduce the memory consumption of hydroelastic contacts (newton-physics#1609) * Fix flakiness cube stacking (newton-physics#1714) * Fix collision shapes not toggleable in viewer UI (newton-physics#1715) * Fix softbody examples table layout in README (newton-physics#1716) * Standardize sensor APIs: label matching, keyword args, and update() method naming (newton-physics#1665) * Fix intermittent crash in parallel test runner from Manager proxy race (newton-physics#1721) * Clean up inertia.py function arguments to match Mesh.create_* API (newton-physics#1719) * Reduce default test runner verbosity (newton-physics#1723) * Add menagerie comparison tests for SolverMuJoCo (newton-physics#1720) Signed-off-by: Alain Denzler <adenzler@nvidia.com> Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> Co-authored-by: Viktor Reutskyy <vreutskyy@nvidia.com> Co-authored-by: Viktor Reutskyy <33062116+vreutskyy@users.noreply.github.com> * Add spatial tendon support for MuJoCo solver (newton-physics#1687) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Expose qfrc_actuator from mujoco (newton-physics#1698) * Skip non-MODEL custom attributes in finalize validation (newton-physics#1734) * Resolve inheritrange for position actuators in MJCF parser (newton-physics#1727) * Support dampratio for position/velocity actuator shortcuts (newton-physics#1722) * Limit concurrency to 1 (newton-physics#1736) * Add a helper method for checking applied usd (newton-physics#1731) * Enhance playback URL handling in ViewerViser (newton-physics#1742) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Removed RenderShapeType (newton-physics#1748) * Override only MassAPI attributes that have been authored (newton-physics#1688) * Integration of newton-actuators (newton-physics#1342) Signed-off-by: jvonmuralt <jvonmuralt@nvidia.com> * Fix ArticulationView crash with fixed-joint-only articulations (newton-physics#1726) * Improve retrieval of Jupyter base URL in ViewerViser (newton-physics#1750) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Disable dynamics testing for UR5e and Apollo tests to avoid CI flakiness (newton-physics#1755) * Margin and Gap rename (newton-physics#1732) * Vbd Demos Fixing (newton-physics#1740) * Fix ViewerViser.log_lines method (newton-physics#1764) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Update warp-lang dependency to 1.12.0rc1 (newton-physics#1763) * Fix fromto capsule/cylinder orientation in MJCF parser (newton-physics#1741) * fix: multi-world particle BVH indexing (newton-physics#1641) Co-authored-by: Eric Heiden <eheiden@nvidia.com> * Clean up unused and internal-only kwargs in SolverMuJoCo (newton-physics#1766) * Parsing of the mimic joint and contact gap/margin from newton schemas (newton-physics#1690) Signed-off-by: Milad Rakhsha <mrakhsha@nvidia.com> * API Refactor v2 (newton-physics#1749) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Support explicit geom mass attributes in MJCF (newton-physics#1744) * Bump flask and werkzeug in lockfile for security (newton-physics#1769) Co-authored-by: Cursor <cursoragent@cursor.com> * Split MJCF worldbody root bodies into separate articulations (newton-physics#1754) * Expose VBD rigid contact forces for solver coupling (newton-physics#1745) Signed-off-by: JC <jumyungc@nvidia.com> * Add MJCF ellipsoid geom import and regression test (newton-physics#1772) Co-authored-by: Cursor <cursoragent@cursor.com> * Weld equality constraints parsed from mjcf are given Nan as the default value of torquescale. The correct default should be 1.0 (newton-physics#1760) * Improve picking accuracy and stability (newton-physics#1712) * Franka cloth demo improvement (newton-physics#1765) * Support computing sensing object transforms & API cleanup (newton-physics#1759) * Remove threading workaround (newton-physics#1751) * [Warp Raytrace] Consolidated ray intersect functions, renamed Options to Config (newton-physics#1767) * Improve README example gallery for PyPI compatibility (newton-physics#1776) * Fix issue with mesh in rerun viewer (newton-physics#1768) * Add PhysxMimicJointAPI parsing to USD importer (newton-physics#1735) * Move some math functions to Warp (newton-physics#1717) Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Add test to ensure MJCF xform argument is relative (newton-physics#1777) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Emit diaginertia instead of fullinertia for diagonal body inertia (newton-physics#1780) * Change default joint armature from 0.01 to 0 (newton-physics#1782) * Fix default kp/kv for position and velocity actuators (newton-physics#1786) * Lock body inertia after explicit MJCF <inertial> element (newton-physics#1784) * Fix for MJCF actuator custom attributes (newton-physics#1783) * Bump version to 0.2.3 Prepare the package metadata for the v0.2.3 release tag. * Fix ViewerRerun rendering of instances from hidden meshes (newton-physics#1788) * API cleanup (newton-physics#1789) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * BODY actuator target name bypasses body name de-duplication in SolverMuJoCo (newton-physics#1729) * Use default density for visual geoms in MJCF import (newton-physics#1781) * Fix GL viewer crash on Wayland (newton-physics#1793) * Make USD xform parameter control absolute articulation placement (newton-physics#1771) * Fix CUDA context corruption in SDF implementation (newton-physics#1792) * Bump mujoco-warp dependency to 3.5.0.2 (newton-physics#1779) * Fix MuJoCo margin/gap conversion (newton-physics#1785) * Bump version to 1.1.0.dev0 (newton-physics#1798) * Missing unittest.main added back to test_import_mjcf.py. Helps with F5 debugging in VS Code. (newton-physics#1796) * Improve H1 example (newton-physics#1801) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Fix ViewerViser.set_camera() (newton-physics#1805) * Rename examples to follow prefix-first naming convention (newton-physics#1802) * Improve MuJoCo actuator domain randomization (newton-physics#1773) * Restore in_cup test in hydro example (newton-physics#1775) * Fix `newton.geometry` imports and change of Mesh maxhullverts global constant * Adapt to having both margin and gap arrays for each geom/shape * Fix for newton.geometry API changes in primitive/narrowphase.py * Fix removal of `BroadPhaseMode` IntEnum and revert to newton-sytle string literals * WIP: Adapt geometry/unified.py to fix breaking changes to `newton.geometry` API * First pass of API adjustments * Patch more gaps (with respect to margin and gap renaming) * GeoType.SDF was removed - reflect that in Kamino * Introduce CoM position offsets w.r.t body frame and operations to convert between body CoM state and generic local body-fixed reference frames. * Add caching of per-entity labels/names/keys in the Model subcontainers * Remove SDF shape wrapper since it's now internal to mesh handling in CD pipelines * Fix USD test assets * Add Newton <--> Kamino joint type conversion operations and per-space default limit constants * Add some cleanup to geometry and unified CD + UTs * Add Newton <--> Kamino shape type conversion operations * Apply new default joint coord limit constants to limits.py * Adapt foubrar model builder and USD asset to produce the same result in sim example * Purge "physical" goems and collapse all into a single group, and purge geometry "layers" * Disable allocation per-joint wrenches by default and make them optional * Make `Model` a dataclass * Separate ModelData* containers into own `core/data.py` module * Fix imports of ModelData * Rename `Model` as `ModelKamino` * Rename `ModelData` as `DataKamino` * Rename `State` as `StateKamino` * Rename `Control` as `ControlKamino` * Rename `Limits` as `LimitsKamino` * Rename `Contacts` as `ContactsKamino` * Rename `ModelBuilder` as `ModelBuilderKamino` * Make imports in test utilities relative * Revise CD meta-data attributes and their computation in GeometryModel and ModelBuilderKamino * Revise primitive CD pipeline * Revise unified CD pipeline * Revise CD front-end interfaces * Fix UTs and relevant utils for interface changes to CD * Change to `wp.DeviceLike` to account for upcoming deprecation of `Devicelike` * Depracate legacy HDF5 data io (will be replaced in the future) * Fix banned imports at module level * Modify USD importer to detect articulations and order geoms and joints similarly to how the Newton `parse_usd` function does. * Add conversion operation from `newton.Model` to `ModelKamino` * Add data, state and control container conversions * Add SolverKamino wrapper that fullfils newton integration interface * Add newton integration examples * Add SolverKamino to newton solver module imports * WIP: fix problem with lambda_j being allocated for only kinematic constraints and failing on array copying * Fix banned git import in benchmark * Rename *Settings to *Config (#213) * Rename SolverKaminoSettings -> SolverKaminoConfig * Rename DualProblemSettings -> DualProblemConfig * Rename CollisionDetectorSettings -> CollisionDetectorConfig * Rename PADMMSettings -> PADMMConfig * Rename ForwardKinematicsSolverSettings -> ForwardKinematicsSolverConfig * Rename SimulatorSettings -> SimulatorConfig * Add check for model compatibility in SolverKamino (#209) * Fix device assignment in sparse CG test on CPU (#216) * Replace Enum-type config attributes with Literal (#215) * Replace warmstart mode config param with literal * Replace contact warmstart mode config param with literal * Replace rotation correction config param with literal * Replace penalty update config param with literal * Replace FK preconditioner option config param with literal * Add post-init checks for dual/PADMM configs * Rename FKPreconditionerOptions to FKPreconditionerType * Remove WorldDescriptor from ModelKamino (#219) * Add geom index offset array to model info * Replace access to world description in model * Remove world descriptor from model * Fix computation of kinematics residual with sparse Jacobian (#220) * Migrates `ModelKaminoSize` to it's own module to avoid circular dependency between core/model.py and core/state.py and rename it as `SizeKamino`. * WIP: Fix SolverKamino wrapper * Fix circular dependency in conversions.py * Fix some broken unit tests and WIP to fix fourbar contact conversions and rendering * Make some conversions @staticmethods instead, because they dont need common class attributes * Fix declaration of custom state attributes and their conversion to/from newton and kamino * WIP: Debug model conversion and newton sim examples * Rename and cleanup start index array of per-world geoms * Model conversion and newton sim examples now work. * Make gravity conversion operation re-usable * Migrates boxes_fourbar builder using newton.ModelBuilder to it's own module to prepare for migration. * Use gravity conversion utility func in SolverKamino * Add reusable joint-parameterization conversion utility * Remove world-descriptor from model converter * Rename helper converter that handles entity-local transforms * Add some cleanup to DR Legs, ANYmal D and basic four-bar examples * Fix module-level imports of additional kamino-specific development dependencies * Fix module-level imports of additional kamino-specific development dependencies * Fix erroneous merge conflict. --------- Signed-off-by: Alain Denzler <adenzler@nvidia.com> Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> Signed-off-by: JC <jumyungc@nvidia.com> Signed-off-by: Milad Rakhsha <mrakhsha@nvidia.com> Signed-off-by: Milad-Rakhsha-NV <167464435+Milad-Rakhsha-NV@users.noreply.github.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Miles Macklin <mmacklin@nvidia.com> Signed-off-by: adenzler-nvidia <adenzler@nvidia.com> Signed-off-by: jvonmuralt <jvonmuralt@nvidia.com> Co-authored-by: Daniela Hase <116915287+daniela-hase@users.noreply.github.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> Co-authored-by: Viktor Reutskyy <33062116+vreutskyy@users.noreply.github.com> Co-authored-by: Eric Shi <97630937+shi-eric@users.noreply.github.com> Co-authored-by: Anka Chen <AnkaChan@users.noreply.github.com> Co-authored-by: Claude Sonnet 4.5 <noreply@anthropic.com> Co-authored-by: JC-nvidia <116605903+jumyungc@users.noreply.github.com> Co-authored-by: Kenny Vilella <kvilella@nvidia.com> Co-authored-by: nvtw <110816143+nvtw@users.noreply.github.com> Co-authored-by: Milad-Rakhsha-NV <167464435+Milad-Rakhsha-NV@users.noreply.github.com> Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com> Co-authored-by: Lennart Röstel <65088822+lenroe@users.noreply.github.com> Co-authored-by: Eric Heiden <eheiden@nvidia.com> Co-authored-by: jvonmuralt <jvonmuralt@nvidia.com> Co-authored-by: camevor <camevor@nvidia.com> Co-authored-by: mzamoramora-nvidia <mzamoramora@nvidia.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com> Co-authored-by: Alessandro Roncone <alecive87@gmail.com> Co-authored-by: gdaviet <57617656+gdaviet@users.noreply.github.com> Co-authored-by: Miles Macklin <mmacklin@nvidia.com> Co-authored-by: Gordon Yeoman <gyeomannvidia@users.noreply.github.com> Co-authored-by: Lukasz Wawrzyniak <lwawrzyniak@nvidia.com> Co-authored-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Cursor <cursoragent@cursor.com> Co-authored-by: Viktor Reutskyy <vreutskyy@nvidia.com> Co-authored-by: Lorenzo Terenzi <lorenzoterenzi96@gmail.com> Co-authored-by: smollerNV <164020096+smollerNV@users.noreply.github.com> Co-authored-by: twidmer <twidmer@nvidia.com> Co-authored-by: Christian Schumacher <christian.schumacher@disney.com> Co-authored-by: Guirec-Maloisel <25688871+Guirec-Maloisel@users.noreply.github.com>

…-physics#1537)

adenzler-nvidia force-pushed the dev/adenzler/flip-ignore-inertial-default branch from 7fd89ee to 6e972f8 Compare February 5, 2026 16:48

adenzler-nvidia requested a review from eric-heiden February 6, 2026 19:54

adenzler-nvidia added 4 commits February 6, 2026 20:54

Merge branch 'main' into dev/adenzler/flip-ignore-inertial-default

796e6aa

Merge branch 'main' into dev/adenzler/flip-ignore-inertial-default

cf4243d

Bump panda_hydro joint_target_ke from 600 to 650

f0ae773

The lift was right at the 0.25 threshold boundary (0.250), causing flaky test failures. Increase gains to provide more margin.

Merge branch 'main' into dev/adenzler/flip-ignore-inertial-default

68b0025

adenzler-nvidia requested a review from jvonmuralt February 9, 2026 10:09

Merge branch 'main' into dev/adenzler/flip-ignore-inertial-default

e47e5ee

adenzler-nvidia mentioned this pull request Feb 9, 2026

mjcf parser not correctly parsing body mass #1521

Closed

adenzler-nvidia added 3 commits February 9, 2026 21:09

Merge branch 'main' into dev/adenzler/flip-ignore-inertial-default

d86f699

Merge branch 'main' into dev/adenzler/flip-ignore-inertial-default

51dcacc

nvtw approved these changes Feb 13, 2026

View reviewed changes

adenzler-nvidia enabled auto-merge February 13, 2026 09:20

adenzler-nvidia added this pull request to the merge queue Feb 13, 2026

Merged via the queue into newton-physics:main with commit 8e0a1c8 Feb 13, 2026
22 checks passed

This was referenced Feb 24, 2026

Support explicit geom mass attributes in MJCF #1744

Merged

Lock body inertia after explicit MJCF <inertial> element #1784

Merged

coderabbitai Bot mentioned this pull request Mar 27, 2026

Fix URDF inertial parameter parsing #2245

Merged

3 tasks

mmacklin pushed a commit to mmacklin/newton that referenced this pull request Apr 7, 2026

Change default ignore_inertial_definitions from True to False (newton…

c5efb93

…-physics#1537)

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Change default ignore_inertial_definitions from True to False#1537

Change default ignore_inertial_definitions from True to False#1537
adenzler-nvidia merged 10 commits into
newton-physics:mainfrom
adenzler-nvidia:dev/adenzler/flip-ignore-inertial-default

adenzler-nvidia commented Feb 5, 2026 •

edited by coderabbitai Bot

Loading

Uh oh!

coderabbitai Bot commented Feb 5, 2026 •

edited

Loading

Reviews paused

Walkthrough

Changes

Estimated code review effort

Possibly related PRs

Suggested reviewers

Uh oh!

codecov Bot commented Feb 5, 2026

Uh oh!

nvtw left a comment

Uh oh!

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

2 participants

Conversation

adenzler-nvidia commented Feb 5, 2026 • edited by coderabbitai Bot Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Description

Newton Migration Guide

Before your PR is "Ready for review"

Summary by CodeRabbit

Uh oh!

coderabbitai Bot commented Feb 5, 2026 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Reviews paused

Walkthrough

Changes

Estimated code review effort

Possibly related PRs

Suggested reviewers

Uh oh!

codecov Bot commented Feb 5, 2026

Codecov Report

Uh oh!

nvtw left a comment

Choose a reason for hiding this comment

Uh oh!

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

2 participants

adenzler-nvidia commented Feb 5, 2026 •

edited by coderabbitai Bot

Loading

coderabbitai Bot commented Feb 5, 2026 •

edited

Loading