Add overflow warnings for narrow-phase collision buffers by vreutskyy · Pull Request #1643 · newton-physics/newton

vreutskyy · 2026-02-16T09:38:14Z

Description

Add a verification kernel that checks all intermediate narrow-phase buffers for overflow after collision kernels complete. Previously, when buffers filled up, pairs were silently dropped with no warning — leading to incorrect simulation results with no indication of the problem.

The verify_narrow_phase_buffers kernel is launched with dim=[1] at the end of launch_custom_write() and checks 8 buffers:

GJK candidate pairs
Mesh-convex shape pairs
Triangle pairs
Mesh-plane shape pairs
Mesh-mesh shape pairs
Heightfield shape pairs
Heightfield cell pairs
SDF-SDF shape pairs

Each check prints a wp.printf warning with the overflowed count and the buffer capacity. Follows the same pattern as the existing verify_collision_step kernel in sdf_hydroelastic.py.

Closes #1187

Newton Migration Guide

The migration guide in docs/migration.rst is up-to date

No migration changes needed — this is a new diagnostic warning with no API changes.

Before your PR is "Ready for review"

Necessary tests have been added and new examples are tested (see newton/tests/test_examples.py)
Documentation is up-to-date
Code passes formatting and linting checks with pre-commit run -a

Summary by CodeRabbit

Bug Fixes
- Added runtime verification that checks collision-buffer capacities and emits warnings when counts exceed limits after narrow-phase processing and at the end of full collision runs (warnings reported on CUDA devices).
Tests
- Added tests validating buffer-overflow detection and warning emission during collision processing, ensuring over-capacity conditions are reported while still producing contact results.

Add a verification kernel that checks all intermediate narrow-phase buffers for overflow after collision kernels complete. Previously, when buffers filled up, pairs were silently dropped with no warning. The kernel checks GJK, mesh-convex, triangle, mesh-plane, mesh-mesh, heightfield, and SDF-SDF pair buffers, printing a wp.printf warning when any counter exceeds its buffer capacity. Closes newton-physics#1187 Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com>

coderabbitai · 2026-02-16T09:38:31Z

Note

Reviews paused

It looks like this branch is under active development. To avoid overwhelming you with review comments due to an influx of new commits, CodeRabbit has automatically paused this review. You can configure this behavior by changing the reviews.auto_review.auto_pause_after_reviewed_commits setting.

Use the following commands to manage reviews:

@coderabbitai resume to resume automatic reviews.
@coderabbitai review to trigger a single review.

Use the checkboxes below for quick actions:

▶️ Resume reviews
🔍 Trigger review

📝 Walkthrough

Walkthrough

Added a GPU verification kernel verify_narrow_phase_buffers and dispatched it after narrow-phase processing (in launch_custom_write) and after full launch to validate collision pipeline buffer counts against capacities and emit overflow warnings.

Changes

Cohort / File(s)	Summary
Narrow-phase verification `newton/_src/geometry/narrow_phase.py`	Added `verify_narrow_phase_buffers` kernel; dispatch added in `launch_custom_write` and `launch` to validate buffer counts vs. maxima and emit overflow warnings for broad phase, GJK, mesh, triangle, mesh-plane, mesh-mesh, heightfield, SDF, and contacts.
Narrow-phase tests (new / duplicated) `newton/tests/test_narrow_phase.py`	Added `TestBufferOverflowWarnings` with helpers (`_make_ellipsoids`, `_make_spheres`, `_create_geometry_arrays`) and tests (`test_gjk_buffer_overflow`, `test_broad_phase_buffer_overflow`). The class appears duplicated in the file — remove duplicate definition.
Test utilities import `newton/tests/test_narrow_phase.py`	Imported `StdOutCapture` from `warp.tests.unittest_utils` to capture and assert emitted warnings in tests.

Sequence Diagram(s)

mermaid
sequenceDiagram
participant Host as Host (CPU)
participant Kernel as verify_narrow_phase_buffers (GPU)
participant Buffers as Collision Buffers
Host->>Buffers: gather current counts & maxima
Host->>Kernel: dispatch verify_narrow_phase_buffers with counts/maxima
Kernel->>Buffers: read counts and maxima
Kernel-->>Host: emit overflow warnings if any thresholds exceeded

Estimated code review effort

🎯 3 (Moderate) | ⏱️ ~20 minutes

Possibly related PRs

Introduce the NarrowPhase class #1014: Modifies the narrow_phase implementation and launch paths; closely related to the added buffer-overflow verification and tests.

Suggested reviewers

mmacklin
eric-heiden
camevor
adenzler-nvidia

🚥 Pre-merge checks | ✅ 5

✅ Passed checks (5 passed)

Check name	Status	Explanation
Description Check	✅ Passed	Check skipped - CodeRabbit’s high-level summary is enabled.
Title check	✅ Passed	The PR title clearly and accurately describes the main change: adding overflow warnings for narrow-phase collision buffers, which is exactly what the code implements.
Linked Issues check	✅ Passed	The PR adds overflow warnings for mesh-mesh collisions and other narrow-phase buffers as requested in issue `#1187`, implementing diagnostic overflow detection rather than the future refactor mentioned.
Out of Scope Changes check	✅ Passed	All changes are within scope: the verification kernel, buffer overflow checks, and tests directly address the objective of detecting and warning about buffer overflows in narrow-phase collision processing.
Docstring Coverage	✅ Passed	Docstring coverage is 100.00% which is sufficient. The required threshold is 80.00%.

_{✏️ Tip: You can configure your own custom pre-merge checks in the settings.}

✨ Finishing touches

📝 Generate docstrings

🧪 Generate unit tests (beta)

Create PR with unit tests
Post copyable unit tests in a comment

Tip

Issue Planner is now in beta. Read the docs and try it out! Share your feedback on Discord.

Thanks for using CodeRabbit! It's free for OSS, and your support helps us grow. If you like it, consider giving us a shout-out.

❤️ Share

_{Comment @coderabbitai help to get the list of available commands and usage tips.}

…isions

codecov · 2026-02-16T09:54:29Z

Codecov Report

✅ All modified and coverable lines are covered by tests.
✅ All tests successful. No failed tests found.

📢 Thoughts on this report? Let us know!

coderabbitai

🧹 Nitpick comments (1)

newton/_src/geometry/narrow_phase.py (1)

1376-1448: Consider gating the verification kernel behind a debug/verbose flag.

This dim=[1] kernel launches every frame solely for diagnostic wp.printf. While the GPU compute cost is negligible, the kernel launch overhead itself (~5-20 μs) adds up in tight simulation loops. A flag like verify_buffers=True (defaulting to True during development, False in production) on NarrowPhase.__init__ would let users opt out once they've confirmed buffer sizes are adequate.

That said, this is a reasonable trade-off for catching silent pair drops during development. Based on learnings: "In Newton's MuJoCo solver Warp kernels, avoid adding redundant runtime validation checks for data that is guaranteed to be valid by construction. Warp kernels execute on GPU where conditional checks introduce measurable overhead."

nvtw · 2026-02-16T14:07:49Z

Looks good in general. Maybe do another pass to see if there are more buffers that we need to monitor.
Maybe the broadphase pair buffer?
And maybe something like writer_data.contact_count > writer_data.contact_max?

Address review feedback: also check the broad phase pair buffer and the final contact buffer for overflow, in addition to the narrow-phase intermediate buffers. Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com>

nvtw

I think it's good now, thanks a lot

nvtw · 2026-02-16T14:44:01Z

Maybe we should add tests that check if the appropriate overflow message(s) appear when an actual overflow happens.
This would also ensure that we don't have crashes due to overflows

…isions

Add tests that deliberately trigger GJK and broad phase buffer overflow to verify warnings are printed and no crashes occur. Uses Warp's StdOutCapture to capture wp.printf output from CUDA kernels. Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com>

wp.printf output capture is unreliable on CPU and Windows. Only assert on warning message content when running on a CUDA device. Counter overflow and no-crash checks still run on all platforms. Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com>

coderabbitai

🧹 Nitpick comments (2)

newton/tests/test_narrow_phase.py (2)

1732-1771: Duplicated _create_geometry_arrays helper between TestNarrowPhase and TestBufferOverflowWarnings.

This is a near-copy of TestNarrowPhase._create_geometry_arrays (lines 194–274) with a simplified collision radius computation. Consider having TestBufferOverflowWarnings inherit from TestNarrowPhase, or extracting the helper as a module-level function to avoid maintaining two copies.

1826-1828: CUDA-only assertion is reasonable but could mask regressions on CPU.

The guard if wp.get_preferred_device().is_cuda means the warning-text assertion is skipped entirely on CPU and Windows. Since the counter overflow check on line 1824 still runs everywhere, this is acceptable, but consider adding a brief comment explaining why (e.g., # wp.printf output is not captured reliably on CPU/Windows).

…isions

coderabbitai

Actionable comments posted: 2

🤖 Fix all issues with AI agents

In `@newton/_src/geometry/narrow_phase.py`:
- Around line 2011-2038: In launch_custom_write replace the undefined
num_candidate_pair with the existing method parameter candidate_pair_count when
building inputs to verify_narrow_phase_buffers, and handle
writer_data.contact_count/contact_max safely by checking for those attributes
(e.g. via hasattr) or by skipping/omitting those two inputs when writer_data
does not expose contact_count/contact_max; update the input list construction
around symbols candidate_pair_count, writer_data.contact_count, and
writer_data.contact_max so the kernel is only passed valid values for both
built-in and custom writer structs.

In `@newton/tests/test_narrow_phase.py`:
- Around line 1798-1817: The test is passing the wrong kwarg to
NarrowPhase.launch: replace the incorrect keyword num_candidate_pair with the
expected candidate_pair_count in the launch() calls (e.g., the call that passes
candidate_pair and candidate_pair_count); update both occurrences (the one near
the candidate_pair invocation and the similar call in
test_broad_phase_buffer_overflow) so the parameter name matches the
NarrowPhase.launch signature.

🧹 Nitpick comments (1)

newton/tests/test_narrow_phase.py (1)

1732-1771: Consider reusing the helper from TestNarrowPhase to avoid duplication.

_create_geometry_arrays is largely duplicated from the TestNarrowPhase class (lines 194–274). The version here computes geom_collision_radius differently (just max(scale) vs. type-specific logic) and skips some edge cases. If the simpler version is intentional for these tests, a brief comment explaining the difference would help future maintainers.

…isions

The heightfield PR renamed this parameter. Fix the reference in the verification launch call and in the overflow test calls. Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com>

coderabbitai

🧹 Nitpick comments (2)

newton/tests/test_narrow_phase.py (2)

1732-1771: _create_geometry_arrays is duplicated from TestNarrowPhase.

This method (lines 1732–1771) largely duplicates TestNarrowPhase._create_geometry_arrays (lines 194–274), with a simplified collision radius computation. Consider extracting a shared helper (module-level function or a common base class) to avoid maintaining two copies.

🤖 Prompt for AI Agents

Verify each finding against the current code and only fix it if needed.

In `@newton/tests/test_narrow_phase.py` around lines 1732 - 1771, The two
duplicate helpers _create_geometry_arrays (in this test file) and
TestNarrowPhase._create_geometry_arrays should be collapsed into a single shared
helper (e.g., create_geometry_arrays_shared) at module scope; move the common
logic into that function, keep parameters/returns identical to the current
callers, and have both TestNarrowPhase._create_geometry_arrays and this file
call the new module-level function; ensure the collision radius computation
(geom_collision_radius = max(scale[0], scale[1], scale[2])) and other fields
(SDFData, ShapeFlags.COLLIDE_SHAPES, etc.) are preserved or unified so behavior
remains consistent across both callers.

1834-1889: Broad-phase overflow test simulates the scenario correctly but doesn't verify contacts.

Unlike test_gjk_buffer_overflow, this test doesn't assert on contact_count or the counter value. Consider adding a similar assertion to verify the narrow phase still processes the pairs that fit in the buffer (the 1 valid pair should still produce a contact).

Suggested addition after line 1889

         if wp.get_preferred_device().is_cuda:
             self.assertIn("Broad phase pair buffer overflowed", output)
+
+        # Verify the narrow phase still processed pairs that fit in the buffer
+        count = contact_count.numpy()[0]
+        self.assertGreaterEqual(count, 0, "Should not crash; contacts from valid pairs may still be produced")

🤖 Prompt for AI Agents

Verify each finding against the current code and only fix it if needed.

In `@newton/tests/test_narrow_phase.py` around lines 1834 - 1889, The
test_broad_phase_buffer_overflow currently only checks for the overflow warning;
add assertions to verify the narrow phase produced the expected contact(s) for
the pairs that fit in the tiny buffer: after wp.synchronize() and capture.end(),
assert contact_count[0] == 1 (or >0) and validate the first contact_pair_out
entry matches the first candidate pair (compare contact_pair_out[0] to the
expected (0,1) pair) and optionally verify contact_position/contact_normal are
finite/non-zero; use the same access pattern as other tests (reading
contact_count and contact_pair_out) to avoid changing the test harness.

🤖 Prompt for all review comments with AI agents

Verify each finding against the current code and only fix it if needed.

Duplicate comments:
In `@newton/_src/geometry/narrow_phase.py`:
- Around line 2034-2035: In launch_custom_write, the code assumes writer_data
has .contact_count and .contact_max which causes AttributeError for custom
writer structs; update the contact-buffer check to first verify those attributes
exist (e.g., using hasattr or getattr with a safe default) or make the entire
contact-count/max check conditional on those attributes being present on
writer_data, and ensure subsequent logic that depends on them only runs when
they are available; refer to the symbols launch_custom_write, writer_data,
contact_count, and contact_max to locate and fix the accesses.

---

Nitpick comments:
In `@newton/tests/test_narrow_phase.py`:
- Around line 1732-1771: The two duplicate helpers _create_geometry_arrays (in
this test file) and TestNarrowPhase._create_geometry_arrays should be collapsed
into a single shared helper (e.g., create_geometry_arrays_shared) at module
scope; move the common logic into that function, keep parameters/returns
identical to the current callers, and have both
TestNarrowPhase._create_geometry_arrays and this file call the new module-level
function; ensure the collision radius computation (geom_collision_radius =
max(scale[0], scale[1], scale[2])) and other fields (SDFData,
ShapeFlags.COLLIDE_SHAPES, etc.) are preserved or unified so behavior remains
consistent across both callers.
- Around line 1834-1889: The test_broad_phase_buffer_overflow currently only
checks for the overflow warning; add assertions to verify the narrow phase
produced the expected contact(s) for the pairs that fit in the tiny buffer:
after wp.synchronize() and capture.end(), assert contact_count[0] == 1 (or >0)
and validate the first contact_pair_out entry matches the first candidate pair
(compare contact_pair_out[0] to the expected (0,1) pair) and optionally verify
contact_position/contact_normal are finite/non-zero; use the same access pattern
as other tests (reading contact_count and contact_pair_out) to avoid changing
the test harness.

@staticmethods

* [Warp Raytrace] Added device parameter (newton-physics#1544) * [Warp Raytrace] Added device parameter to previously overlooked call (newton-physics#1545) * SolverMuJoCo: Fix tolerance clamping in update_solver_options_kernel (newton-physics#1546) * Change default shape_ke to align with MuJoCo, parse geom solref from MJCF for contact stiffness/damping (newton-physics#1491) Signed-off-by: Alain Denzler <adenzler@nvidia.com> * Fix log_shapes broadcasting for length-1 warp arrays (newton-physics#1550) * Fix XPBD restitution particle index (newton-physics#1557) * Out-of-Bound memory read in example_diffsim_bear newton-physics#1386 (newton-physics#1533) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Add versioned documentation deployment to GitHub Pages (newton-physics#1560) * Fix broken documentation links after versioned docs deployment (newton-physics#1566) * VBD New Features (newton-physics#1479) Co-authored-by: Claude Sonnet 4.5 <noreply@anthropic.com> * Add banners to membership verification workflow steps (newton-physics#1569) * Support cable junctions (newton-physics#1519) Signed-off-by: JC <jumyungc@nvidia.com> * Rename parameter I to inertia newton-physics#1543 (newton-physics#1551) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Fix example_robot_anymal_c_walk.py (newton-physics#1574) * Change everywhere linesearch to iterative (newton-physics#1573) * Remove standard collision pipeline (newton-physics#1538) * USD Plumbing MJC solver attributes through resolver and custom attribute framework (newton-physics#1463) Signed-off-by: Milad Rakhsha <mrakhsha@nvidia.com> Signed-off-by: Milad-Rakhsha-NV <167464435+Milad-Rakhsha-NV@users.noreply.github.com> Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> * Fix child shape filtering (newton-physics#1559) * Fix ViewerRerun ignoring hidden parameter in log_mesh and log_instances (newton-physics#1555) * Make NxN and SAP broad phase respect filtered pairs (newton-physics#1554) * Add --quiet flag to examples to suppress Warp messages (newton-physics#1585) * Defer resolution of MESH_MAXHULLVERT default in importers (newton-physics#1587) * Fix TypeError when finalizing SDF geometry with device kwarg (newton-physics#1586) * Make MESH_MAXHULLVERT a static class attribute Mesh.MAX_HULL_VERTICES. (newton-physics#1598) * Significant non-determinism in unified collision pipeline for anymal_c_walking example newton-physics#1505 (newton-physics#1588) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Add test for non-contiguous case (newton-physics#1549) * Fix nightly Warp CI to resolve pre-release builds (newton-physics#1606) * Verify default class and value handling (newton-physics#1556) * SolverMuJoCo: Expand geom_margin to avoid OOB read with heterogeneous worlds (newton-physics#1607) * Fix bug in control clear method (newton-physics#1602) * Enable Use of Newton IK in Lab newton-physics#662 (newton-physics#1539) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Fix import of non-articulated joints (newton-physics#1535) * Deduplicate _process_joint_custom_attributes frequency handling (newton-physics#1584) * Add CI check for stale API docs and fix local build warnings (newton-physics#1570) * Update Pillow 12.0.0 to 12.1.1 (newton-physics#1612) * Prepare handling of mimic constraints in Newton (newton-physics#1523) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Support floating, base_joint and parent_body arguments for importers (newton-physics#1498) * Fix contact buffer memory overestimation (newton-physics#1614) * Configure banned-module-level-imports for ruff (newton-physics#1583) * Explicit `Contacts` instantiation with `Model.contacts()` and `CollisionPipeline.contacts()` (newton-physics#1445) * Fix the quadruped benchmark regression (newton-physics#1615) * Change default ignore_inertial_definitions from True to False (newton-physics#1537) * Finalize the Recording API (newton-physics#1600) * SolverMuJoCo: Fix ccd_iterations default (newton-physics#1631) * update gitignore to ignore Claude Code sandbox files (newton-physics#1628) * Add mimic joint support to SolverMuJoCo (newton-physics#1627) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Add --no-cache-clear flag to test runner (newton-physics#1629) * Update MuJoCo and MuJoCo Warp to 3.5.0 release (newton-physics#1633) * Improve inertia parsing from USD (newton-physics#1605) Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com> * Remove standalone .typos.toml in favor of pyproject.toml config (newton-physics#1642) * Heightfield support newton-physics#1189 (newton-physics#1547) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Example_robot_policy: Replace ValueError with clean error for missing PhysX policy (newton-physics#1636) Co-authored-by: Viktor Reutskyy <33062116+vreutskyy@users.noreply.github.com> * Avoid unnecessary inflation of the contact reduction voxel aabb (newton-physics#1650) * Rename num_worlds to world_count (newton-physics#1634) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Support parsing autolimits from MJCF (newton-physics#1651) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Fix particle-shape restitution ignoring body velocity (newton-physics#1273) (newton-physics#1580) * Add overflow warnings for narrow-phase collision buffers (newton-physics#1643) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Documentation: add units to model/state docstrings (newton-physics#1649) * fix(viewer): add missing JointType.BALL support to contact line kernel (newton-physics#1640) * Make terrain mesh visual-only in anymal C walking example (newton-physics#1660) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Fix initialization of collider state in MPM finite difference mode (newton-physics#1652) * docs: document ModelBuilder.default_shape_cfg (newton-physics#1662) * Finalize the collision API (newton-physics#1581) * Remove hardcoded subnet ID from AWS workflow (newton-physics#1664) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Attempt to fix AWS config (newton-physics#1666) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Update AWS workflows to g7e.2xlarge with multi-AZ failover (newton-physics#1669) * fix(viewer-usd): disambiguate log_points colors for N=3 warp arrays (newton-physics#1661) * Viewer gl optimizations (newton-physics#1656) Signed-off-by: Miles Macklin <mmacklin@nvidia.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> Co-authored-by: Eric Heiden <eheiden@nvidia.com> * docs: add articulation workflow guidance and regression check (newton-physics#1663) * fix(examples): propagate IK solution to model state in Franka example (newton-physics#1637) * fix(deps,docs): bump nbconvert to 7.17.0 and fix ArticulationView doctest (newton-physics#1670) * Cleanup and improve some example (newton-physics#1625) Signed-off-by: adenzler-nvidia <adenzler@nvidia.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> * Handle zero-mass bodies and flip ensure_nonstatic_links default (newton-physics#1635) * Additional testing for ArticulationView (newton-physics#1527) Co-authored-by: Eric Heiden <eheiden@nvidia.com> * Update warp-lang nightly to 1.12.0.dev20260217 (newton-physics#1677) * Change default friction coefficients to match MuJoCo (newton-physics#1681) * Refactor mesh creation functions (newton-physics#1654) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Parse joint frictionloss from MJCF (newton-physics#1680) * Fix free joint body_pos and add ref/qpos0 support for MuJoCo solver (newton-physics#1645) * Fix root shapes in ArticulationView with fixed base (newton-physics#1639) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Use model collision methods and remove `create_collision_pipeline` from examples (newton-physics#1648) Co-authored-by: nvtw <110816143+nvtw@users.noreply.github.com> * Fix XPBD apply_joint_forces ignoring child joint transform (newton-physics#1582) * Adjust SDF API (newton-physics#1644) Co-authored-by: Eric Heiden <eheiden@nvidia.com> * Optimize test suite runtime (~18% faster) (newton-physics#1689) * Remove ensure_nonstatic_links option from importers (newton-physics#1682) Signed-off-by: adenzler-nvidia <adenzler@nvidia.com> * SolverMuJoCo: Add geom_margin support, align thickness default with MuJoCo and schemas (newton-physics#1653) * refactor: privatize non-public solver internals (newton-physics#1683) * Fix option parsing with multiple <option> elements from includes (newton-physics#1692) * Bump warp-lang nightly and newton-usd-schemas (newton-physics#1693) * Get rid of tkinter dependency (newton-physics#1676) * Fix SDF example contact buffer overflow (newton-physics#1695) * Fix implicit biastype for position/velocity actuator shortcuts (newton-physics#1678) * Fix include processor to respect meshdir/texturedir (newton-physics#1685) * Reduce cold-cache Warp compile time for geometry modules (newton-physics#1618) Co-authored-by: Cursor <cursoragent@cursor.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> * Fix xyzw-to-wxyz quaternion conversion in body inertia kernel (newton-physics#1694) * Rename key to label and add hierarchical labels (newton-physics#1592) (newton-physics#1632) * Expose geometry SDF helpers on public API (newton-physics#1684) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Improve custom frequency handling from USD, parse MuJoCo actuators and tendons (newton-physics#1510) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Collapse fixed joints with non articulated bodies (newton-physics#1608) * Fix renaming joint_key -> joint_label (newton-physics#1700) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Bump .python-version from 3.11 to 3.12 (newton-physics#1702) * Replace CITATION.md with CITATION.cff (newton-physics#1706) * Respect MJCF contype=conaffinity=0 via collision_group=0 (newton-physics#1703) * Make ViewerUSD reuse existing USD layers for the same output path (newton-physics#1704) Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Remove dead up-axis conversion from MuJoCo solver (newton-physics#1707) * Skip IK cube stacking example test (newton-physics#1713) * Fix global pairs (world=-1) not exported to MuJoCo spec (newton-physics#1705) * Reduce the memory consumption of hydroelastic contacts (newton-physics#1609) * Fix flakiness cube stacking (newton-physics#1714) * Fix collision shapes not toggleable in viewer UI (newton-physics#1715) * Fix softbody examples table layout in README (newton-physics#1716) * Standardize sensor APIs: label matching, keyword args, and update() method naming (newton-physics#1665) * Fix intermittent crash in parallel test runner from Manager proxy race (newton-physics#1721) * Clean up inertia.py function arguments to match Mesh.create_* API (newton-physics#1719) * Reduce default test runner verbosity (newton-physics#1723) * Add menagerie comparison tests for SolverMuJoCo (newton-physics#1720) Signed-off-by: Alain Denzler <adenzler@nvidia.com> Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> Co-authored-by: Viktor Reutskyy <vreutskyy@nvidia.com> Co-authored-by: Viktor Reutskyy <33062116+vreutskyy@users.noreply.github.com> * Add spatial tendon support for MuJoCo solver (newton-physics#1687) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Expose qfrc_actuator from mujoco (newton-physics#1698) * Skip non-MODEL custom attributes in finalize validation (newton-physics#1734) * Resolve inheritrange for position actuators in MJCF parser (newton-physics#1727) * Support dampratio for position/velocity actuator shortcuts (newton-physics#1722) * Limit concurrency to 1 (newton-physics#1736) * Add a helper method for checking applied usd (newton-physics#1731) * Enhance playback URL handling in ViewerViser (newton-physics#1742) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Removed RenderShapeType (newton-physics#1748) * Override only MassAPI attributes that have been authored (newton-physics#1688) * Integration of newton-actuators (newton-physics#1342) Signed-off-by: jvonmuralt <jvonmuralt@nvidia.com> * Fix ArticulationView crash with fixed-joint-only articulations (newton-physics#1726) * Improve retrieval of Jupyter base URL in ViewerViser (newton-physics#1750) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Disable dynamics testing for UR5e and Apollo tests to avoid CI flakiness (newton-physics#1755) * Margin and Gap rename (newton-physics#1732) * Vbd Demos Fixing (newton-physics#1740) * Fix ViewerViser.log_lines method (newton-physics#1764) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Update warp-lang dependency to 1.12.0rc1 (newton-physics#1763) * Fix fromto capsule/cylinder orientation in MJCF parser (newton-physics#1741) * fix: multi-world particle BVH indexing (newton-physics#1641) Co-authored-by: Eric Heiden <eheiden@nvidia.com> * Clean up unused and internal-only kwargs in SolverMuJoCo (newton-physics#1766) * Parsing of the mimic joint and contact gap/margin from newton schemas (newton-physics#1690) Signed-off-by: Milad Rakhsha <mrakhsha@nvidia.com> * API Refactor v2 (newton-physics#1749) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Support explicit geom mass attributes in MJCF (newton-physics#1744) * Bump flask and werkzeug in lockfile for security (newton-physics#1769) Co-authored-by: Cursor <cursoragent@cursor.com> * Split MJCF worldbody root bodies into separate articulations (newton-physics#1754) * Expose VBD rigid contact forces for solver coupling (newton-physics#1745) Signed-off-by: JC <jumyungc@nvidia.com> * Add MJCF ellipsoid geom import and regression test (newton-physics#1772) Co-authored-by: Cursor <cursoragent@cursor.com> * Weld equality constraints parsed from mjcf are given Nan as the default value of torquescale. The correct default should be 1.0 (newton-physics#1760) * Improve picking accuracy and stability (newton-physics#1712) * Franka cloth demo improvement (newton-physics#1765) * Support computing sensing object transforms & API cleanup (newton-physics#1759) * Remove threading workaround (newton-physics#1751) * [Warp Raytrace] Consolidated ray intersect functions, renamed Options to Config (newton-physics#1767) * Improve README example gallery for PyPI compatibility (newton-physics#1776) * Fix issue with mesh in rerun viewer (newton-physics#1768) * Add PhysxMimicJointAPI parsing to USD importer (newton-physics#1735) * Move some math functions to Warp (newton-physics#1717) Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Add test to ensure MJCF xform argument is relative (newton-physics#1777) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Emit diaginertia instead of fullinertia for diagonal body inertia (newton-physics#1780) * Change default joint armature from 0.01 to 0 (newton-physics#1782) * Fix default kp/kv for position and velocity actuators (newton-physics#1786) * Lock body inertia after explicit MJCF <inertial> element (newton-physics#1784) * Fix for MJCF actuator custom attributes (newton-physics#1783) * Bump version to 0.2.3 Prepare the package metadata for the v0.2.3 release tag. * Fix ViewerRerun rendering of instances from hidden meshes (newton-physics#1788) * API cleanup (newton-physics#1789) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * BODY actuator target name bypasses body name de-duplication in SolverMuJoCo (newton-physics#1729) * Use default density for visual geoms in MJCF import (newton-physics#1781) * Fix GL viewer crash on Wayland (newton-physics#1793) * Make USD xform parameter control absolute articulation placement (newton-physics#1771) * Fix CUDA context corruption in SDF implementation (newton-physics#1792) * Bump mujoco-warp dependency to 3.5.0.2 (newton-physics#1779) * Fix MuJoCo margin/gap conversion (newton-physics#1785) * Bump version to 1.1.0.dev0 (newton-physics#1798) * Missing unittest.main added back to test_import_mjcf.py. Helps with F5 debugging in VS Code. (newton-physics#1796) * Improve H1 example (newton-physics#1801) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Fix ViewerViser.set_camera() (newton-physics#1805) * Rename examples to follow prefix-first naming convention (newton-physics#1802) * Improve MuJoCo actuator domain randomization (newton-physics#1773) * Restore in_cup test in hydro example (newton-physics#1775) * Fix `newton.geometry` imports and change of Mesh maxhullverts global constant * Adapt to having both margin and gap arrays for each geom/shape * Fix for newton.geometry API changes in primitive/narrowphase.py * Fix removal of `BroadPhaseMode` IntEnum and revert to newton-sytle string literals * WIP: Adapt geometry/unified.py to fix breaking changes to `newton.geometry` API * First pass of API adjustments * Patch more gaps (with respect to margin and gap renaming) * GeoType.SDF was removed - reflect that in Kamino * Introduce CoM position offsets w.r.t body frame and operations to convert between body CoM state and generic local body-fixed reference frames. * Add caching of per-entity labels/names/keys in the Model subcontainers * Remove SDF shape wrapper since it's now internal to mesh handling in CD pipelines * Fix USD test assets * Add Newton <--> Kamino joint type conversion operations and per-space default limit constants * Add some cleanup to geometry and unified CD + UTs * Add Newton <--> Kamino shape type conversion operations * Apply new default joint coord limit constants to limits.py * Adapt foubrar model builder and USD asset to produce the same result in sim example * Purge "physical" goems and collapse all into a single group, and purge geometry "layers" * Disable allocation per-joint wrenches by default and make them optional * Make `Model` a dataclass * Separate ModelData* containers into own `core/data.py` module * Fix imports of ModelData * Rename `Model` as `ModelKamino` * Rename `ModelData` as `DataKamino` * Rename `State` as `StateKamino` * Rename `Control` as `ControlKamino` * Rename `Limits` as `LimitsKamino` * Rename `Contacts` as `ContactsKamino` * Rename `ModelBuilder` as `ModelBuilderKamino` * Make imports in test utilities relative * Revise CD meta-data attributes and their computation in GeometryModel and ModelBuilderKamino * Revise primitive CD pipeline * Revise unified CD pipeline * Revise CD front-end interfaces * Fix UTs and relevant utils for interface changes to CD * Change to `wp.DeviceLike` to account for upcoming deprecation of `Devicelike` * Depracate legacy HDF5 data io (will be replaced in the future) * Fix banned imports at module level * Modify USD importer to detect articulations and order geoms and joints similarly to how the Newton `parse_usd` function does. * Add conversion operation from `newton.Model` to `ModelKamino` * Add data, state and control container conversions * Add SolverKamino wrapper that fullfils newton integration interface * Add newton integration examples * Add SolverKamino to newton solver module imports * WIP: fix problem with lambda_j being allocated for only kinematic constraints and failing on array copying * Fix banned git import in benchmark * Rename *Settings to *Config (#213) * Rename SolverKaminoSettings -> SolverKaminoConfig * Rename DualProblemSettings -> DualProblemConfig * Rename CollisionDetectorSettings -> CollisionDetectorConfig * Rename PADMMSettings -> PADMMConfig * Rename ForwardKinematicsSolverSettings -> ForwardKinematicsSolverConfig * Rename SimulatorSettings -> SimulatorConfig * Add check for model compatibility in SolverKamino (#209) * Fix device assignment in sparse CG test on CPU (#216) * Replace Enum-type config attributes with Literal (#215) * Replace warmstart mode config param with literal * Replace contact warmstart mode config param with literal * Replace rotation correction config param with literal * Replace penalty update config param with literal * Replace FK preconditioner option config param with literal * Add post-init checks for dual/PADMM configs * Rename FKPreconditionerOptions to FKPreconditionerType * Remove WorldDescriptor from ModelKamino (#219) * Add geom index offset array to model info * Replace access to world description in model * Remove world descriptor from model * Fix computation of kinematics residual with sparse Jacobian (#220) * Migrates `ModelKaminoSize` to it's own module to avoid circular dependency between core/model.py and core/state.py and rename it as `SizeKamino`. * WIP: Fix SolverKamino wrapper * Fix circular dependency in conversions.py * Fix some broken unit tests and WIP to fix fourbar contact conversions and rendering * Make some conversions @staticmethods instead, because they dont need common class attributes * Fix declaration of custom state attributes and their conversion to/from newton and kamino * WIP: Debug model conversion and newton sim examples * Rename and cleanup start index array of per-world geoms * Model conversion and newton sim examples now work. * Make gravity conversion operation re-usable * Migrates boxes_fourbar builder using newton.ModelBuilder to it's own module to prepare for migration. * Use gravity conversion utility func in SolverKamino * Add reusable joint-parameterization conversion utility * Remove world-descriptor from model converter * Rename helper converter that handles entity-local transforms * Add some cleanup to DR Legs, ANYmal D and basic four-bar examples * Fix module-level imports of additional kamino-specific development dependencies * Fix module-level imports of additional kamino-specific development dependencies * Fix erroneous merge conflict. --------- Signed-off-by: Alain Denzler <adenzler@nvidia.com> Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> Signed-off-by: JC <jumyungc@nvidia.com> Signed-off-by: Milad Rakhsha <mrakhsha@nvidia.com> Signed-off-by: Milad-Rakhsha-NV <167464435+Milad-Rakhsha-NV@users.noreply.github.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Miles Macklin <mmacklin@nvidia.com> Signed-off-by: adenzler-nvidia <adenzler@nvidia.com> Signed-off-by: jvonmuralt <jvonmuralt@nvidia.com> Co-authored-by: Daniela Hase <116915287+daniela-hase@users.noreply.github.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> Co-authored-by: Viktor Reutskyy <33062116+vreutskyy@users.noreply.github.com> Co-authored-by: Eric Shi <97630937+shi-eric@users.noreply.github.com> Co-authored-by: Anka Chen <AnkaChan@users.noreply.github.com> Co-authored-by: Claude Sonnet 4.5 <noreply@anthropic.com> Co-authored-by: JC-nvidia <116605903+jumyungc@users.noreply.github.com> Co-authored-by: Kenny Vilella <kvilella@nvidia.com> Co-authored-by: nvtw <110816143+nvtw@users.noreply.github.com> Co-authored-by: Milad-Rakhsha-NV <167464435+Milad-Rakhsha-NV@users.noreply.github.com> Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com> Co-authored-by: Lennart Röstel <65088822+lenroe@users.noreply.github.com> Co-authored-by: Eric Heiden <eheiden@nvidia.com> Co-authored-by: jvonmuralt <jvonmuralt@nvidia.com> Co-authored-by: camevor <camevor@nvidia.com> Co-authored-by: mzamoramora-nvidia <mzamoramora@nvidia.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com> Co-authored-by: Alessandro Roncone <alecive87@gmail.com> Co-authored-by: gdaviet <57617656+gdaviet@users.noreply.github.com> Co-authored-by: Miles Macklin <mmacklin@nvidia.com> Co-authored-by: Gordon Yeoman <gyeomannvidia@users.noreply.github.com> Co-authored-by: Lukasz Wawrzyniak <lwawrzyniak@nvidia.com> Co-authored-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Cursor <cursoragent@cursor.com> Co-authored-by: Viktor Reutskyy <vreutskyy@nvidia.com> Co-authored-by: Lorenzo Terenzi <lorenzoterenzi96@gmail.com> Co-authored-by: smollerNV <164020096+smollerNV@users.noreply.github.com> Co-authored-by: twidmer <twidmer@nvidia.com> Co-authored-by: Christian Schumacher <christian.schumacher@disney.com> Co-authored-by: Guirec-Maloisel <25688871+Guirec-Maloisel@users.noreply.github.com>

@staticmethods

* [Warp Raytrace] Added device parameter (newton-physics#1544) * [Warp Raytrace] Added device parameter to previously overlooked call (newton-physics#1545) * SolverMuJoCo: Fix tolerance clamping in update_solver_options_kernel (newton-physics#1546) * Change default shape_ke to align with MuJoCo, parse geom solref from MJCF for contact stiffness/damping (newton-physics#1491) Signed-off-by: Alain Denzler <adenzler@nvidia.com> * Fix log_shapes broadcasting for length-1 warp arrays (newton-physics#1550) * Fix XPBD restitution particle index (newton-physics#1557) * Out-of-Bound memory read in example_diffsim_bear newton-physics#1386 (newton-physics#1533) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Add versioned documentation deployment to GitHub Pages (newton-physics#1560) * Fix broken documentation links after versioned docs deployment (newton-physics#1566) * VBD New Features (newton-physics#1479) Co-authored-by: Claude Sonnet 4.5 <noreply@anthropic.com> * Add banners to membership verification workflow steps (newton-physics#1569) * Support cable junctions (newton-physics#1519) Signed-off-by: JC <jumyungc@nvidia.com> * Rename parameter I to inertia newton-physics#1543 (newton-physics#1551) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Fix example_robot_anymal_c_walk.py (newton-physics#1574) * Change everywhere linesearch to iterative (newton-physics#1573) * Remove standard collision pipeline (newton-physics#1538) * USD Plumbing MJC solver attributes through resolver and custom attribute framework (newton-physics#1463) Signed-off-by: Milad Rakhsha <mrakhsha@nvidia.com> Signed-off-by: Milad-Rakhsha-NV <167464435+Milad-Rakhsha-NV@users.noreply.github.com> Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> * Fix child shape filtering (newton-physics#1559) * Fix ViewerRerun ignoring hidden parameter in log_mesh and log_instances (newton-physics#1555) * Make NxN and SAP broad phase respect filtered pairs (newton-physics#1554) * Add --quiet flag to examples to suppress Warp messages (newton-physics#1585) * Defer resolution of MESH_MAXHULLVERT default in importers (newton-physics#1587) * Fix TypeError when finalizing SDF geometry with device kwarg (newton-physics#1586) * Make MESH_MAXHULLVERT a static class attribute Mesh.MAX_HULL_VERTICES. (newton-physics#1598) * Significant non-determinism in unified collision pipeline for anymal_c_walking example newton-physics#1505 (newton-physics#1588) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Add test for non-contiguous case (newton-physics#1549) * Fix nightly Warp CI to resolve pre-release builds (newton-physics#1606) * Verify default class and value handling (newton-physics#1556) * SolverMuJoCo: Expand geom_margin to avoid OOB read with heterogeneous worlds (newton-physics#1607) * Fix bug in control clear method (newton-physics#1602) * Enable Use of Newton IK in Lab newton-physics#662 (newton-physics#1539) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Fix import of non-articulated joints (newton-physics#1535) * Deduplicate _process_joint_custom_attributes frequency handling (newton-physics#1584) * Add CI check for stale API docs and fix local build warnings (newton-physics#1570) * Update Pillow 12.0.0 to 12.1.1 (newton-physics#1612) * Prepare handling of mimic constraints in Newton (newton-physics#1523) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Support floating, base_joint and parent_body arguments for importers (newton-physics#1498) * Fix contact buffer memory overestimation (newton-physics#1614) * Configure banned-module-level-imports for ruff (newton-physics#1583) * Explicit `Contacts` instantiation with `Model.contacts()` and `CollisionPipeline.contacts()` (newton-physics#1445) * Fix the quadruped benchmark regression (newton-physics#1615) * Change default ignore_inertial_definitions from True to False (newton-physics#1537) * Finalize the Recording API (newton-physics#1600) * SolverMuJoCo: Fix ccd_iterations default (newton-physics#1631) * update gitignore to ignore Claude Code sandbox files (newton-physics#1628) * Add mimic joint support to SolverMuJoCo (newton-physics#1627) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Add --no-cache-clear flag to test runner (newton-physics#1629) * Update MuJoCo and MuJoCo Warp to 3.5.0 release (newton-physics#1633) * Improve inertia parsing from USD (newton-physics#1605) Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com> * Remove standalone .typos.toml in favor of pyproject.toml config (newton-physics#1642) * Heightfield support newton-physics#1189 (newton-physics#1547) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Example_robot_policy: Replace ValueError with clean error for missing PhysX policy (newton-physics#1636) Co-authored-by: Viktor Reutskyy <33062116+vreutskyy@users.noreply.github.com> * Avoid unnecessary inflation of the contact reduction voxel aabb (newton-physics#1650) * Rename num_worlds to world_count (newton-physics#1634) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Support parsing autolimits from MJCF (newton-physics#1651) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Fix particle-shape restitution ignoring body velocity (newton-physics#1273) (newton-physics#1580) * Add overflow warnings for narrow-phase collision buffers (newton-physics#1643) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Documentation: add units to model/state docstrings (newton-physics#1649) * fix(viewer): add missing JointType.BALL support to contact line kernel (newton-physics#1640) * Make terrain mesh visual-only in anymal C walking example (newton-physics#1660) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Fix initialization of collider state in MPM finite difference mode (newton-physics#1652) * docs: document ModelBuilder.default_shape_cfg (newton-physics#1662) * Finalize the collision API (newton-physics#1581) * Remove hardcoded subnet ID from AWS workflow (newton-physics#1664) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Attempt to fix AWS config (newton-physics#1666) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Update AWS workflows to g7e.2xlarge with multi-AZ failover (newton-physics#1669) * fix(viewer-usd): disambiguate log_points colors for N=3 warp arrays (newton-physics#1661) * Viewer gl optimizations (newton-physics#1656) Signed-off-by: Miles Macklin <mmacklin@nvidia.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> Co-authored-by: Eric Heiden <eheiden@nvidia.com> * docs: add articulation workflow guidance and regression check (newton-physics#1663) * fix(examples): propagate IK solution to model state in Franka example (newton-physics#1637) * fix(deps,docs): bump nbconvert to 7.17.0 and fix ArticulationView doctest (newton-physics#1670) * Cleanup and improve some example (newton-physics#1625) Signed-off-by: adenzler-nvidia <adenzler@nvidia.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> * Handle zero-mass bodies and flip ensure_nonstatic_links default (newton-physics#1635) * Additional testing for ArticulationView (newton-physics#1527) Co-authored-by: Eric Heiden <eheiden@nvidia.com> * Update warp-lang nightly to 1.12.0.dev20260217 (newton-physics#1677) * Change default friction coefficients to match MuJoCo (newton-physics#1681) * Refactor mesh creation functions (newton-physics#1654) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Parse joint frictionloss from MJCF (newton-physics#1680) * Fix free joint body_pos and add ref/qpos0 support for MuJoCo solver (newton-physics#1645) * Fix root shapes in ArticulationView with fixed base (newton-physics#1639) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Use model collision methods and remove `create_collision_pipeline` from examples (newton-physics#1648) Co-authored-by: nvtw <110816143+nvtw@users.noreply.github.com> * Fix XPBD apply_joint_forces ignoring child joint transform (newton-physics#1582) * Adjust SDF API (newton-physics#1644) Co-authored-by: Eric Heiden <eheiden@nvidia.com> * Optimize test suite runtime (~18% faster) (newton-physics#1689) * Remove ensure_nonstatic_links option from importers (newton-physics#1682) Signed-off-by: adenzler-nvidia <adenzler@nvidia.com> * SolverMuJoCo: Add geom_margin support, align thickness default with MuJoCo and schemas (newton-physics#1653) * refactor: privatize non-public solver internals (newton-physics#1683) * Fix option parsing with multiple <option> elements from includes (newton-physics#1692) * Bump warp-lang nightly and newton-usd-schemas (newton-physics#1693) * Get rid of tkinter dependency (newton-physics#1676) * Fix SDF example contact buffer overflow (newton-physics#1695) * Fix implicit biastype for position/velocity actuator shortcuts (newton-physics#1678) * Fix include processor to respect meshdir/texturedir (newton-physics#1685) * Reduce cold-cache Warp compile time for geometry modules (newton-physics#1618) Co-authored-by: Cursor <cursoragent@cursor.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> * Fix xyzw-to-wxyz quaternion conversion in body inertia kernel (newton-physics#1694) * Rename key to label and add hierarchical labels (newton-physics#1592) (newton-physics#1632) * Expose geometry SDF helpers on public API (newton-physics#1684) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Improve custom frequency handling from USD, parse MuJoCo actuators and tendons (newton-physics#1510) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Collapse fixed joints with non articulated bodies (newton-physics#1608) * Fix renaming joint_key -> joint_label (newton-physics#1700) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Bump .python-version from 3.11 to 3.12 (newton-physics#1702) * Replace CITATION.md with CITATION.cff (newton-physics#1706) * Respect MJCF contype=conaffinity=0 via collision_group=0 (newton-physics#1703) * Make ViewerUSD reuse existing USD layers for the same output path (newton-physics#1704) Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Remove dead up-axis conversion from MuJoCo solver (newton-physics#1707) * Skip IK cube stacking example test (newton-physics#1713) * Fix global pairs (world=-1) not exported to MuJoCo spec (newton-physics#1705) * Reduce the memory consumption of hydroelastic contacts (newton-physics#1609) * Fix flakiness cube stacking (newton-physics#1714) * Fix collision shapes not toggleable in viewer UI (newton-physics#1715) * Fix softbody examples table layout in README (newton-physics#1716) * Standardize sensor APIs: label matching, keyword args, and update() method naming (newton-physics#1665) * Fix intermittent crash in parallel test runner from Manager proxy race (newton-physics#1721) * Clean up inertia.py function arguments to match Mesh.create_* API (newton-physics#1719) * Reduce default test runner verbosity (newton-physics#1723) * Add menagerie comparison tests for SolverMuJoCo (newton-physics#1720) Signed-off-by: Alain Denzler <adenzler@nvidia.com> Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> Co-authored-by: Viktor Reutskyy <vreutskyy@nvidia.com> Co-authored-by: Viktor Reutskyy <33062116+vreutskyy@users.noreply.github.com> * Add spatial tendon support for MuJoCo solver (newton-physics#1687) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Expose qfrc_actuator from mujoco (newton-physics#1698) * Skip non-MODEL custom attributes in finalize validation (newton-physics#1734) * Resolve inheritrange for position actuators in MJCF parser (newton-physics#1727) * Support dampratio for position/velocity actuator shortcuts (newton-physics#1722) * Limit concurrency to 1 (newton-physics#1736) * Add a helper method for checking applied usd (newton-physics#1731) * Enhance playback URL handling in ViewerViser (newton-physics#1742) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Removed RenderShapeType (newton-physics#1748) * Override only MassAPI attributes that have been authored (newton-physics#1688) * Integration of newton-actuators (newton-physics#1342) Signed-off-by: jvonmuralt <jvonmuralt@nvidia.com> * Fix ArticulationView crash with fixed-joint-only articulations (newton-physics#1726) * Improve retrieval of Jupyter base URL in ViewerViser (newton-physics#1750) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Disable dynamics testing for UR5e and Apollo tests to avoid CI flakiness (newton-physics#1755) * Margin and Gap rename (newton-physics#1732) * Vbd Demos Fixing (newton-physics#1740) * Fix ViewerViser.log_lines method (newton-physics#1764) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Update warp-lang dependency to 1.12.0rc1 (newton-physics#1763) * Fix fromto capsule/cylinder orientation in MJCF parser (newton-physics#1741) * fix: multi-world particle BVH indexing (newton-physics#1641) Co-authored-by: Eric Heiden <eheiden@nvidia.com> * Clean up unused and internal-only kwargs in SolverMuJoCo (newton-physics#1766) * Parsing of the mimic joint and contact gap/margin from newton schemas (newton-physics#1690) Signed-off-by: Milad Rakhsha <mrakhsha@nvidia.com> * API Refactor v2 (newton-physics#1749) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Support explicit geom mass attributes in MJCF (newton-physics#1744) * Bump flask and werkzeug in lockfile for security (newton-physics#1769) Co-authored-by: Cursor <cursoragent@cursor.com> * Split MJCF worldbody root bodies into separate articulations (newton-physics#1754) * Expose VBD rigid contact forces for solver coupling (newton-physics#1745) Signed-off-by: JC <jumyungc@nvidia.com> * Add MJCF ellipsoid geom import and regression test (newton-physics#1772) Co-authored-by: Cursor <cursoragent@cursor.com> * Weld equality constraints parsed from mjcf are given Nan as the default value of torquescale. The correct default should be 1.0 (newton-physics#1760) * Improve picking accuracy and stability (newton-physics#1712) * Franka cloth demo improvement (newton-physics#1765) * Support computing sensing object transforms & API cleanup (newton-physics#1759) * Remove threading workaround (newton-physics#1751) * [Warp Raytrace] Consolidated ray intersect functions, renamed Options to Config (newton-physics#1767) * Improve README example gallery for PyPI compatibility (newton-physics#1776) * Fix issue with mesh in rerun viewer (newton-physics#1768) * Add PhysxMimicJointAPI parsing to USD importer (newton-physics#1735) * Move some math functions to Warp (newton-physics#1717) Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Add test to ensure MJCF xform argument is relative (newton-physics#1777) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Emit diaginertia instead of fullinertia for diagonal body inertia (newton-physics#1780) * Change default joint armature from 0.01 to 0 (newton-physics#1782) * Fix default kp/kv for position and velocity actuators (newton-physics#1786) * Lock body inertia after explicit MJCF <inertial> element (newton-physics#1784) * Fix for MJCF actuator custom attributes (newton-physics#1783) * Bump version to 0.2.3 Prepare the package metadata for the v0.2.3 release tag. * Fix ViewerRerun rendering of instances from hidden meshes (newton-physics#1788) * API cleanup (newton-physics#1789) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * BODY actuator target name bypasses body name de-duplication in SolverMuJoCo (newton-physics#1729) * Use default density for visual geoms in MJCF import (newton-physics#1781) * Fix GL viewer crash on Wayland (newton-physics#1793) * Make USD xform parameter control absolute articulation placement (newton-physics#1771) * Fix CUDA context corruption in SDF implementation (newton-physics#1792) * Bump mujoco-warp dependency to 3.5.0.2 (newton-physics#1779) * Fix MuJoCo margin/gap conversion (newton-physics#1785) * Bump version to 1.1.0.dev0 (newton-physics#1798) * Missing unittest.main added back to test_import_mjcf.py. Helps with F5 debugging in VS Code. (newton-physics#1796) * Improve H1 example (newton-physics#1801) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Fix ViewerViser.set_camera() (newton-physics#1805) * Rename examples to follow prefix-first naming convention (newton-physics#1802) * Improve MuJoCo actuator domain randomization (newton-physics#1773) * Restore in_cup test in hydro example (newton-physics#1775) * Fix `newton.geometry` imports and change of Mesh maxhullverts global constant * Adapt to having both margin and gap arrays for each geom/shape * Fix for newton.geometry API changes in primitive/narrowphase.py * Fix removal of `BroadPhaseMode` IntEnum and revert to newton-sytle string literals * WIP: Adapt geometry/unified.py to fix breaking changes to `newton.geometry` API * First pass of API adjustments * Patch more gaps (with respect to margin and gap renaming) * GeoType.SDF was removed - reflect that in Kamino * Introduce CoM position offsets w.r.t body frame and operations to convert between body CoM state and generic local body-fixed reference frames. * Add caching of per-entity labels/names/keys in the Model subcontainers * Remove SDF shape wrapper since it's now internal to mesh handling in CD pipelines * Fix USD test assets * Add Newton <--> Kamino joint type conversion operations and per-space default limit constants * Add some cleanup to geometry and unified CD + UTs * Add Newton <--> Kamino shape type conversion operations * Apply new default joint coord limit constants to limits.py * Adapt foubrar model builder and USD asset to produce the same result in sim example * Purge "physical" goems and collapse all into a single group, and purge geometry "layers" * Disable allocation per-joint wrenches by default and make them optional * Make `Model` a dataclass * Separate ModelData* containers into own `core/data.py` module * Fix imports of ModelData * Rename `Model` as `ModelKamino` * Rename `ModelData` as `DataKamino` * Rename `State` as `StateKamino` * Rename `Control` as `ControlKamino` * Rename `Limits` as `LimitsKamino` * Rename `Contacts` as `ContactsKamino` * Rename `ModelBuilder` as `ModelBuilderKamino` * Make imports in test utilities relative * Revise CD meta-data attributes and their computation in GeometryModel and ModelBuilderKamino * Revise primitive CD pipeline * Revise unified CD pipeline * Revise CD front-end interfaces * Fix UTs and relevant utils for interface changes to CD * Change to `wp.DeviceLike` to account for upcoming deprecation of `Devicelike` * Depracate legacy HDF5 data io (will be replaced in the future) * Fix banned imports at module level * Modify USD importer to detect articulations and order geoms and joints similarly to how the Newton `parse_usd` function does. * Add conversion operation from `newton.Model` to `ModelKamino` * Add data, state and control container conversions * Add SolverKamino wrapper that fullfils newton integration interface * Add newton integration examples * Add SolverKamino to newton solver module imports * WIP: fix problem with lambda_j being allocated for only kinematic constraints and failing on array copying * Fix banned git import in benchmark * Rename *Settings to *Config (#213) * Rename SolverKaminoSettings -> SolverKaminoConfig * Rename DualProblemSettings -> DualProblemConfig * Rename CollisionDetectorSettings -> CollisionDetectorConfig * Rename PADMMSettings -> PADMMConfig * Rename ForwardKinematicsSolverSettings -> ForwardKinematicsSolverConfig * Rename SimulatorSettings -> SimulatorConfig * Add check for model compatibility in SolverKamino (#209) * Fix device assignment in sparse CG test on CPU (#216) * Replace Enum-type config attributes with Literal (#215) * Replace warmstart mode config param with literal * Replace contact warmstart mode config param with literal * Replace rotation correction config param with literal * Replace penalty update config param with literal * Replace FK preconditioner option config param with literal * Add post-init checks for dual/PADMM configs * Rename FKPreconditionerOptions to FKPreconditionerType * Remove WorldDescriptor from ModelKamino (#219) * Add geom index offset array to model info * Replace access to world description in model * Remove world descriptor from model * Fix computation of kinematics residual with sparse Jacobian (#220) * Migrates `ModelKaminoSize` to it's own module to avoid circular dependency between core/model.py and core/state.py and rename it as `SizeKamino`. * WIP: Fix SolverKamino wrapper * Fix circular dependency in conversions.py * Fix some broken unit tests and WIP to fix fourbar contact conversions and rendering * Make some conversions @staticmethods instead, because they dont need common class attributes * Fix declaration of custom state attributes and their conversion to/from newton and kamino * WIP: Debug model conversion and newton sim examples * Rename and cleanup start index array of per-world geoms * Model conversion and newton sim examples now work. * Make gravity conversion operation re-usable * Migrates boxes_fourbar builder using newton.ModelBuilder to it's own module to prepare for migration. * Use gravity conversion utility func in SolverKamino * Add reusable joint-parameterization conversion utility * Remove world-descriptor from model converter * Rename helper converter that handles entity-local transforms * Add some cleanup to DR Legs, ANYmal D and basic four-bar examples * Fix module-level imports of additional kamino-specific development dependencies * Fix module-level imports of additional kamino-specific development dependencies * Fix erroneous merge conflict. --------- Signed-off-by: Alain Denzler <adenzler@nvidia.com> Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> Signed-off-by: JC <jumyungc@nvidia.com> Signed-off-by: Milad Rakhsha <mrakhsha@nvidia.com> Signed-off-by: Milad-Rakhsha-NV <167464435+Milad-Rakhsha-NV@users.noreply.github.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Miles Macklin <mmacklin@nvidia.com> Signed-off-by: adenzler-nvidia <adenzler@nvidia.com> Signed-off-by: jvonmuralt <jvonmuralt@nvidia.com> Co-authored-by: Daniela Hase <116915287+daniela-hase@users.noreply.github.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> Co-authored-by: Viktor Reutskyy <33062116+vreutskyy@users.noreply.github.com> Co-authored-by: Eric Shi <97630937+shi-eric@users.noreply.github.com> Co-authored-by: Anka Chen <AnkaChan@users.noreply.github.com> Co-authored-by: Claude Sonnet 4.5 <noreply@anthropic.com> Co-authored-by: JC-nvidia <116605903+jumyungc@users.noreply.github.com> Co-authored-by: Kenny Vilella <kvilella@nvidia.com> Co-authored-by: nvtw <110816143+nvtw@users.noreply.github.com> Co-authored-by: Milad-Rakhsha-NV <167464435+Milad-Rakhsha-NV@users.noreply.github.com> Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com> Co-authored-by: Lennart Röstel <65088822+lenroe@users.noreply.github.com> Co-authored-by: Eric Heiden <eheiden@nvidia.com> Co-authored-by: jvonmuralt <jvonmuralt@nvidia.com> Co-authored-by: camevor <camevor@nvidia.com> Co-authored-by: mzamoramora-nvidia <mzamoramora@nvidia.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com> Co-authored-by: Alessandro Roncone <alecive87@gmail.com> Co-authored-by: gdaviet <57617656+gdaviet@users.noreply.github.com> Co-authored-by: Miles Macklin <mmacklin@nvidia.com> Co-authored-by: Gordon Yeoman <gyeomannvidia@users.noreply.github.com> Co-authored-by: Lukasz Wawrzyniak <lwawrzyniak@nvidia.com> Co-authored-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Cursor <cursoragent@cursor.com> Co-authored-by: Viktor Reutskyy <vreutskyy@nvidia.com> Co-authored-by: Lorenzo Terenzi <lorenzoterenzi96@gmail.com> Co-authored-by: smollerNV <164020096+smollerNV@users.noreply.github.com> Co-authored-by: twidmer <twidmer@nvidia.com> Co-authored-by: Christian Schumacher <christian.schumacher@disney.com> Co-authored-by: Guirec-Maloisel <25688871+Guirec-Maloisel@users.noreply.github.com>

@staticmethods

* [Warp Raytrace] Added device parameter (newton-physics#1544) * [Warp Raytrace] Added device parameter to previously overlooked call (newton-physics#1545) * SolverMuJoCo: Fix tolerance clamping in update_solver_options_kernel (newton-physics#1546) * Change default shape_ke to align with MuJoCo, parse geom solref from MJCF for contact stiffness/damping (newton-physics#1491) Signed-off-by: Alain Denzler <adenzler@nvidia.com> * Fix log_shapes broadcasting for length-1 warp arrays (newton-physics#1550) * Fix XPBD restitution particle index (newton-physics#1557) * Out-of-Bound memory read in example_diffsim_bear newton-physics#1386 (newton-physics#1533) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Add versioned documentation deployment to GitHub Pages (newton-physics#1560) * Fix broken documentation links after versioned docs deployment (newton-physics#1566) * VBD New Features (newton-physics#1479) Co-authored-by: Claude Sonnet 4.5 <noreply@anthropic.com> * Add banners to membership verification workflow steps (newton-physics#1569) * Support cable junctions (newton-physics#1519) Signed-off-by: JC <jumyungc@nvidia.com> * Rename parameter I to inertia newton-physics#1543 (newton-physics#1551) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Fix example_robot_anymal_c_walk.py (newton-physics#1574) * Change everywhere linesearch to iterative (newton-physics#1573) * Remove standard collision pipeline (newton-physics#1538) * USD Plumbing MJC solver attributes through resolver and custom attribute framework (newton-physics#1463) Signed-off-by: Milad Rakhsha <mrakhsha@nvidia.com> Signed-off-by: Milad-Rakhsha-NV <167464435+Milad-Rakhsha-NV@users.noreply.github.com> Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> * Fix child shape filtering (newton-physics#1559) * Fix ViewerRerun ignoring hidden parameter in log_mesh and log_instances (newton-physics#1555) * Make NxN and SAP broad phase respect filtered pairs (newton-physics#1554) * Add --quiet flag to examples to suppress Warp messages (newton-physics#1585) * Defer resolution of MESH_MAXHULLVERT default in importers (newton-physics#1587) * Fix TypeError when finalizing SDF geometry with device kwarg (newton-physics#1586) * Make MESH_MAXHULLVERT a static class attribute Mesh.MAX_HULL_VERTICES. (newton-physics#1598) * Significant non-determinism in unified collision pipeline for anymal_c_walking example newton-physics#1505 (newton-physics#1588) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Add test for non-contiguous case (newton-physics#1549) * Fix nightly Warp CI to resolve pre-release builds (newton-physics#1606) * Verify default class and value handling (newton-physics#1556) * SolverMuJoCo: Expand geom_margin to avoid OOB read with heterogeneous worlds (newton-physics#1607) * Fix bug in control clear method (newton-physics#1602) * Enable Use of Newton IK in Lab newton-physics#662 (newton-physics#1539) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Fix import of non-articulated joints (newton-physics#1535) * Deduplicate _process_joint_custom_attributes frequency handling (newton-physics#1584) * Add CI check for stale API docs and fix local build warnings (newton-physics#1570) * Update Pillow 12.0.0 to 12.1.1 (newton-physics#1612) * Prepare handling of mimic constraints in Newton (newton-physics#1523) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Support floating, base_joint and parent_body arguments for importers (newton-physics#1498) * Fix contact buffer memory overestimation (newton-physics#1614) * Configure banned-module-level-imports for ruff (newton-physics#1583) * Explicit `Contacts` instantiation with `Model.contacts()` and `CollisionPipeline.contacts()` (newton-physics#1445) * Fix the quadruped benchmark regression (newton-physics#1615) * Change default ignore_inertial_definitions from True to False (newton-physics#1537) * Finalize the Recording API (newton-physics#1600) * SolverMuJoCo: Fix ccd_iterations default (newton-physics#1631) * update gitignore to ignore Claude Code sandbox files (newton-physics#1628) * Add mimic joint support to SolverMuJoCo (newton-physics#1627) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Add --no-cache-clear flag to test runner (newton-physics#1629) * Update MuJoCo and MuJoCo Warp to 3.5.0 release (newton-physics#1633) * Improve inertia parsing from USD (newton-physics#1605) Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com> * Remove standalone .typos.toml in favor of pyproject.toml config (newton-physics#1642) * Heightfield support newton-physics#1189 (newton-physics#1547) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Example_robot_policy: Replace ValueError with clean error for missing PhysX policy (newton-physics#1636) Co-authored-by: Viktor Reutskyy <33062116+vreutskyy@users.noreply.github.com> * Avoid unnecessary inflation of the contact reduction voxel aabb (newton-physics#1650) * Rename num_worlds to world_count (newton-physics#1634) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Support parsing autolimits from MJCF (newton-physics#1651) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Fix particle-shape restitution ignoring body velocity (newton-physics#1273) (newton-physics#1580) * Add overflow warnings for narrow-phase collision buffers (newton-physics#1643) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Documentation: add units to model/state docstrings (newton-physics#1649) * fix(viewer): add missing JointType.BALL support to contact line kernel (newton-physics#1640) * Make terrain mesh visual-only in anymal C walking example (newton-physics#1660) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Fix initialization of collider state in MPM finite difference mode (newton-physics#1652) * docs: document ModelBuilder.default_shape_cfg (newton-physics#1662) * Finalize the collision API (newton-physics#1581) * Remove hardcoded subnet ID from AWS workflow (newton-physics#1664) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Attempt to fix AWS config (newton-physics#1666) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Update AWS workflows to g7e.2xlarge with multi-AZ failover (newton-physics#1669) * fix(viewer-usd): disambiguate log_points colors for N=3 warp arrays (newton-physics#1661) * Viewer gl optimizations (newton-physics#1656) Signed-off-by: Miles Macklin <mmacklin@nvidia.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> Co-authored-by: Eric Heiden <eheiden@nvidia.com> * docs: add articulation workflow guidance and regression check (newton-physics#1663) * fix(examples): propagate IK solution to model state in Franka example (newton-physics#1637) * fix(deps,docs): bump nbconvert to 7.17.0 and fix ArticulationView doctest (newton-physics#1670) * Cleanup and improve some example (newton-physics#1625) Signed-off-by: adenzler-nvidia <adenzler@nvidia.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> * Handle zero-mass bodies and flip ensure_nonstatic_links default (newton-physics#1635) * Additional testing for ArticulationView (newton-physics#1527) Co-authored-by: Eric Heiden <eheiden@nvidia.com> * Update warp-lang nightly to 1.12.0.dev20260217 (newton-physics#1677) * Change default friction coefficients to match MuJoCo (newton-physics#1681) * Refactor mesh creation functions (newton-physics#1654) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Parse joint frictionloss from MJCF (newton-physics#1680) * Fix free joint body_pos and add ref/qpos0 support for MuJoCo solver (newton-physics#1645) * Fix root shapes in ArticulationView with fixed base (newton-physics#1639) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Use model collision methods and remove `create_collision_pipeline` from examples (newton-physics#1648) Co-authored-by: nvtw <110816143+nvtw@users.noreply.github.com> * Fix XPBD apply_joint_forces ignoring child joint transform (newton-physics#1582) * Adjust SDF API (newton-physics#1644) Co-authored-by: Eric Heiden <eheiden@nvidia.com> * Optimize test suite runtime (~18% faster) (newton-physics#1689) * Remove ensure_nonstatic_links option from importers (newton-physics#1682) Signed-off-by: adenzler-nvidia <adenzler@nvidia.com> * SolverMuJoCo: Add geom_margin support, align thickness default with MuJoCo and schemas (newton-physics#1653) * refactor: privatize non-public solver internals (newton-physics#1683) * Fix option parsing with multiple <option> elements from includes (newton-physics#1692) * Bump warp-lang nightly and newton-usd-schemas (newton-physics#1693) * Get rid of tkinter dependency (newton-physics#1676) * Fix SDF example contact buffer overflow (newton-physics#1695) * Fix implicit biastype for position/velocity actuator shortcuts (newton-physics#1678) * Fix include processor to respect meshdir/texturedir (newton-physics#1685) * Reduce cold-cache Warp compile time for geometry modules (newton-physics#1618) Co-authored-by: Cursor <cursoragent@cursor.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> * Fix xyzw-to-wxyz quaternion conversion in body inertia kernel (newton-physics#1694) * Rename key to label and add hierarchical labels (newton-physics#1592) (newton-physics#1632) * Expose geometry SDF helpers on public API (newton-physics#1684) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Improve custom frequency handling from USD, parse MuJoCo actuators and tendons (newton-physics#1510) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Collapse fixed joints with non articulated bodies (newton-physics#1608) * Fix renaming joint_key -> joint_label (newton-physics#1700) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Bump .python-version from 3.11 to 3.12 (newton-physics#1702) * Replace CITATION.md with CITATION.cff (newton-physics#1706) * Respect MJCF contype=conaffinity=0 via collision_group=0 (newton-physics#1703) * Make ViewerUSD reuse existing USD layers for the same output path (newton-physics#1704) Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Remove dead up-axis conversion from MuJoCo solver (newton-physics#1707) * Skip IK cube stacking example test (newton-physics#1713) * Fix global pairs (world=-1) not exported to MuJoCo spec (newton-physics#1705) * Reduce the memory consumption of hydroelastic contacts (newton-physics#1609) * Fix flakiness cube stacking (newton-physics#1714) * Fix collision shapes not toggleable in viewer UI (newton-physics#1715) * Fix softbody examples table layout in README (newton-physics#1716) * Standardize sensor APIs: label matching, keyword args, and update() method naming (newton-physics#1665) * Fix intermittent crash in parallel test runner from Manager proxy race (newton-physics#1721) * Clean up inertia.py function arguments to match Mesh.create_* API (newton-physics#1719) * Reduce default test runner verbosity (newton-physics#1723) * Add menagerie comparison tests for SolverMuJoCo (newton-physics#1720) Signed-off-by: Alain Denzler <adenzler@nvidia.com> Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> Co-authored-by: Viktor Reutskyy <vreutskyy@nvidia.com> Co-authored-by: Viktor Reutskyy <33062116+vreutskyy@users.noreply.github.com> * Add spatial tendon support for MuJoCo solver (newton-physics#1687) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Expose qfrc_actuator from mujoco (newton-physics#1698) * Skip non-MODEL custom attributes in finalize validation (newton-physics#1734) * Resolve inheritrange for position actuators in MJCF parser (newton-physics#1727) * Support dampratio for position/velocity actuator shortcuts (newton-physics#1722) * Limit concurrency to 1 (newton-physics#1736) * Add a helper method for checking applied usd (newton-physics#1731) * Enhance playback URL handling in ViewerViser (newton-physics#1742) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Removed RenderShapeType (newton-physics#1748) * Override only MassAPI attributes that have been authored (newton-physics#1688) * Integration of newton-actuators (newton-physics#1342) Signed-off-by: jvonmuralt <jvonmuralt@nvidia.com> * Fix ArticulationView crash with fixed-joint-only articulations (newton-physics#1726) * Improve retrieval of Jupyter base URL in ViewerViser (newton-physics#1750) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Disable dynamics testing for UR5e and Apollo tests to avoid CI flakiness (newton-physics#1755) * Margin and Gap rename (newton-physics#1732) * Vbd Demos Fixing (newton-physics#1740) * Fix ViewerViser.log_lines method (newton-physics#1764) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Update warp-lang dependency to 1.12.0rc1 (newton-physics#1763) * Fix fromto capsule/cylinder orientation in MJCF parser (newton-physics#1741) * fix: multi-world particle BVH indexing (newton-physics#1641) Co-authored-by: Eric Heiden <eheiden@nvidia.com> * Clean up unused and internal-only kwargs in SolverMuJoCo (newton-physics#1766) * Parsing of the mimic joint and contact gap/margin from newton schemas (newton-physics#1690) Signed-off-by: Milad Rakhsha <mrakhsha@nvidia.com> * API Refactor v2 (newton-physics#1749) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Support explicit geom mass attributes in MJCF (newton-physics#1744) * Bump flask and werkzeug in lockfile for security (newton-physics#1769) Co-authored-by: Cursor <cursoragent@cursor.com> * Split MJCF worldbody root bodies into separate articulations (newton-physics#1754) * Expose VBD rigid contact forces for solver coupling (newton-physics#1745) Signed-off-by: JC <jumyungc@nvidia.com> * Add MJCF ellipsoid geom import and regression test (newton-physics#1772) Co-authored-by: Cursor <cursoragent@cursor.com> * Weld equality constraints parsed from mjcf are given Nan as the default value of torquescale. The correct default should be 1.0 (newton-physics#1760) * Improve picking accuracy and stability (newton-physics#1712) * Franka cloth demo improvement (newton-physics#1765) * Support computing sensing object transforms & API cleanup (newton-physics#1759) * Remove threading workaround (newton-physics#1751) * [Warp Raytrace] Consolidated ray intersect functions, renamed Options to Config (newton-physics#1767) * Improve README example gallery for PyPI compatibility (newton-physics#1776) * Fix issue with mesh in rerun viewer (newton-physics#1768) * Add PhysxMimicJointAPI parsing to USD importer (newton-physics#1735) * Move some math functions to Warp (newton-physics#1717) Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Add test to ensure MJCF xform argument is relative (newton-physics#1777) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Emit diaginertia instead of fullinertia for diagonal body inertia (newton-physics#1780) * Change default joint armature from 0.01 to 0 (newton-physics#1782) * Fix default kp/kv for position and velocity actuators (newton-physics#1786) * Lock body inertia after explicit MJCF <inertial> element (newton-physics#1784) * Fix for MJCF actuator custom attributes (newton-physics#1783) * Bump version to 0.2.3 Prepare the package metadata for the v0.2.3 release tag. * Fix ViewerRerun rendering of instances from hidden meshes (newton-physics#1788) * API cleanup (newton-physics#1789) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * BODY actuator target name bypasses body name de-duplication in SolverMuJoCo (newton-physics#1729) * Use default density for visual geoms in MJCF import (newton-physics#1781) * Fix GL viewer crash on Wayland (newton-physics#1793) * Make USD xform parameter control absolute articulation placement (newton-physics#1771) * Fix CUDA context corruption in SDF implementation (newton-physics#1792) * Bump mujoco-warp dependency to 3.5.0.2 (newton-physics#1779) * Fix MuJoCo margin/gap conversion (newton-physics#1785) * Bump version to 1.1.0.dev0 (newton-physics#1798) * Missing unittest.main added back to test_import_mjcf.py. Helps with F5 debugging in VS Code. (newton-physics#1796) * Improve H1 example (newton-physics#1801) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Fix ViewerViser.set_camera() (newton-physics#1805) * Rename examples to follow prefix-first naming convention (newton-physics#1802) * Improve MuJoCo actuator domain randomization (newton-physics#1773) * Restore in_cup test in hydro example (newton-physics#1775) * Fix `newton.geometry` imports and change of Mesh maxhullverts global constant * Adapt to having both margin and gap arrays for each geom/shape * Fix for newton.geometry API changes in primitive/narrowphase.py * Fix removal of `BroadPhaseMode` IntEnum and revert to newton-sytle string literals * WIP: Adapt geometry/unified.py to fix breaking changes to `newton.geometry` API * First pass of API adjustments * Patch more gaps (with respect to margin and gap renaming) * GeoType.SDF was removed - reflect that in Kamino * Introduce CoM position offsets w.r.t body frame and operations to convert between body CoM state and generic local body-fixed reference frames. * Add caching of per-entity labels/names/keys in the Model subcontainers * Remove SDF shape wrapper since it's now internal to mesh handling in CD pipelines * Fix USD test assets * Add Newton <--> Kamino joint type conversion operations and per-space default limit constants * Add some cleanup to geometry and unified CD + UTs * Add Newton <--> Kamino shape type conversion operations * Apply new default joint coord limit constants to limits.py * Adapt foubrar model builder and USD asset to produce the same result in sim example * Purge "physical" goems and collapse all into a single group, and purge geometry "layers" * Disable allocation per-joint wrenches by default and make them optional * Make `Model` a dataclass * Separate ModelData* containers into own `core/data.py` module * Fix imports of ModelData * Rename `Model` as `ModelKamino` * Rename `ModelData` as `DataKamino` * Rename `State` as `StateKamino` * Rename `Control` as `ControlKamino` * Rename `Limits` as `LimitsKamino` * Rename `Contacts` as `ContactsKamino` * Rename `ModelBuilder` as `ModelBuilderKamino` * Make imports in test utilities relative * Revise CD meta-data attributes and their computation in GeometryModel and ModelBuilderKamino * Revise primitive CD pipeline * Revise unified CD pipeline * Revise CD front-end interfaces * Fix UTs and relevant utils for interface changes to CD * Change to `wp.DeviceLike` to account for upcoming deprecation of `Devicelike` * Depracate legacy HDF5 data io (will be replaced in the future) * Fix banned imports at module level * Modify USD importer to detect articulations and order geoms and joints similarly to how the Newton `parse_usd` function does. * Add conversion operation from `newton.Model` to `ModelKamino` * Add data, state and control container conversions * Add SolverKamino wrapper that fullfils newton integration interface * Add newton integration examples * Add SolverKamino to newton solver module imports * WIP: fix problem with lambda_j being allocated for only kinematic constraints and failing on array copying * Fix banned git import in benchmark * Rename *Settings to *Config (#213) * Rename SolverKaminoSettings -> SolverKaminoConfig * Rename DualProblemSettings -> DualProblemConfig * Rename CollisionDetectorSettings -> CollisionDetectorConfig * Rename PADMMSettings -> PADMMConfig * Rename ForwardKinematicsSolverSettings -> ForwardKinematicsSolverConfig * Rename SimulatorSettings -> SimulatorConfig * Add check for model compatibility in SolverKamino (#209) * Fix device assignment in sparse CG test on CPU (#216) * Replace Enum-type config attributes with Literal (#215) * Replace warmstart mode config param with literal * Replace contact warmstart mode config param with literal * Replace rotation correction config param with literal * Replace penalty update config param with literal * Replace FK preconditioner option config param with literal * Add post-init checks for dual/PADMM configs * Rename FKPreconditionerOptions to FKPreconditionerType * Remove WorldDescriptor from ModelKamino (#219) * Add geom index offset array to model info * Replace access to world description in model * Remove world descriptor from model * Fix computation of kinematics residual with sparse Jacobian (#220) * Migrates `ModelKaminoSize` to it's own module to avoid circular dependency between core/model.py and core/state.py and rename it as `SizeKamino`. * WIP: Fix SolverKamino wrapper * Fix circular dependency in conversions.py * Fix some broken unit tests and WIP to fix fourbar contact conversions and rendering * Make some conversions @staticmethods instead, because they dont need common class attributes * Fix declaration of custom state attributes and their conversion to/from newton and kamino * WIP: Debug model conversion and newton sim examples * Rename and cleanup start index array of per-world geoms * Model conversion and newton sim examples now work. * Make gravity conversion operation re-usable * Migrates boxes_fourbar builder using newton.ModelBuilder to it's own module to prepare for migration. * Use gravity conversion utility func in SolverKamino * Add reusable joint-parameterization conversion utility * Remove world-descriptor from model converter * Rename helper converter that handles entity-local transforms * Add some cleanup to DR Legs, ANYmal D and basic four-bar examples * Fix module-level imports of additional kamino-specific development dependencies * Fix module-level imports of additional kamino-specific development dependencies * Fix erroneous merge conflict. --------- Signed-off-by: Alain Denzler <adenzler@nvidia.com> Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> Signed-off-by: JC <jumyungc@nvidia.com> Signed-off-by: Milad Rakhsha <mrakhsha@nvidia.com> Signed-off-by: Milad-Rakhsha-NV <167464435+Milad-Rakhsha-NV@users.noreply.github.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Miles Macklin <mmacklin@nvidia.com> Signed-off-by: adenzler-nvidia <adenzler@nvidia.com> Signed-off-by: jvonmuralt <jvonmuralt@nvidia.com> Co-authored-by: Daniela Hase <116915287+daniela-hase@users.noreply.github.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> Co-authored-by: Viktor Reutskyy <33062116+vreutskyy@users.noreply.github.com> Co-authored-by: Eric Shi <97630937+shi-eric@users.noreply.github.com> Co-authored-by: Anka Chen <AnkaChan@users.noreply.github.com> Co-authored-by: Claude Sonnet 4.5 <noreply@anthropic.com> Co-authored-by: JC-nvidia <116605903+jumyungc@users.noreply.github.com> Co-authored-by: Kenny Vilella <kvilella@nvidia.com> Co-authored-by: nvtw <110816143+nvtw@users.noreply.github.com> Co-authored-by: Milad-Rakhsha-NV <167464435+Milad-Rakhsha-NV@users.noreply.github.com> Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com> Co-authored-by: Lennart Röstel <65088822+lenroe@users.noreply.github.com> Co-authored-by: Eric Heiden <eheiden@nvidia.com> Co-authored-by: jvonmuralt <jvonmuralt@nvidia.com> Co-authored-by: camevor <camevor@nvidia.com> Co-authored-by: mzamoramora-nvidia <mzamoramora@nvidia.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com> Co-authored-by: Alessandro Roncone <alecive87@gmail.com> Co-authored-by: gdaviet <57617656+gdaviet@users.noreply.github.com> Co-authored-by: Miles Macklin <mmacklin@nvidia.com> Co-authored-by: Gordon Yeoman <gyeomannvidia@users.noreply.github.com> Co-authored-by: Lukasz Wawrzyniak <lwawrzyniak@nvidia.com> Co-authored-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Cursor <cursoragent@cursor.com> Co-authored-by: Viktor Reutskyy <vreutskyy@nvidia.com> Co-authored-by: Lorenzo Terenzi <lorenzoterenzi96@gmail.com> Co-authored-by: smollerNV <164020096+smollerNV@users.noreply.github.com> Co-authored-by: twidmer <twidmer@nvidia.com> Co-authored-by: Christian Schumacher <christian.schumacher@disney.com> Co-authored-by: Guirec-Maloisel <25688871+Guirec-Maloisel@users.noreply.github.com>

…ics#1643) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com>

Merge branch 'main' into 1187-add-overflow-warning-for-mesh-mesh-coll…

ea6961d

…isions

coderabbitai Bot reviewed Feb 16, 2026

View reviewed changes

adenzler-nvidia requested a review from nvtw February 16, 2026 10:26

Add broad phase and contact buffer overflow checks

ff212d0

Address review feedback: also check the broad phase pair buffer and the final contact buffer for overflow, in addition to the narrow-phase intermediate buffers. Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com>

nvtw previously approved these changes Feb 16, 2026

View reviewed changes

Merge branch 'main' into 1187-add-overflow-warning-for-mesh-mesh-coll…

9f6fdbb

…isions

vreutskyy enabled auto-merge February 16, 2026 15:07

vreutskyy dismissed nvtw’s stale review via 4a50996 February 16, 2026 15:11

coderabbitai Bot reviewed Feb 16, 2026

View reviewed changes

nvtw previously approved these changes Feb 16, 2026

View reviewed changes

vreutskyy added this pull request to the merge queue Feb 16, 2026

github-merge-queue Bot removed this pull request from the merge queue due to failed status checks Feb 16, 2026

vreutskyy added this pull request to the merge queue Feb 16, 2026

github-merge-queue Bot removed this pull request from the merge queue due to failed status checks Feb 16, 2026

Merge branch 'main' into 1187-add-overflow-warning-for-mesh-mesh-coll…

fb43d67

…isions

vreutskyy enabled auto-merge February 16, 2026 18:01

coderabbitai Bot reviewed Feb 16, 2026

View reviewed changes

Comment thread newton/_src/geometry/narrow_phase.py

Comment thread newton/tests/test_narrow_phase.py

vreutskyy and others added 2 commits February 17, 2026 08:59

Merge branch 'main' into 1187-add-overflow-warning-for-mesh-mesh-coll…

35b3a2f

…isions

Fix parameter name: num_candidate_pair -> candidate_pair_count

22a4c53

The heightfield PR renamed this parameter. Fix the reference in the verification launch call and in the overflow test calls. Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com>

vreutskyy dismissed nvtw’s stale review via 22a4c53 February 17, 2026 08:04

coderabbitai Bot reviewed Feb 17, 2026

View reviewed changes

nvtw approved these changes Feb 17, 2026

View reviewed changes

vreutskyy added this pull request to the merge queue Feb 17, 2026

Merged via the queue into newton-physics:main with commit 516efa1 Feb 17, 2026
22 checks passed

coderabbitai Bot mentioned this pull request Feb 19, 2026

Fix SDF example contact buffer overflow #1695

Merged

4 tasks

mmacklin pushed a commit to mmacklin/newton that referenced this pull request Apr 7, 2026

Add overflow warnings for narrow-phase collision buffers (newton-phys…

392e25f

…ics#1643) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com>

Conversation

vreutskyy commented Feb 16, 2026 • edited by coderabbitai Bot Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Description

Newton Migration Guide

Before your PR is "Ready for review"

Summary by CodeRabbit

Uh oh!

coderabbitai Bot commented Feb 16, 2026 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Reviews paused

Walkthrough

Changes

Sequence Diagram(s)

Estimated code review effort

Possibly related PRs

Suggested reviewers

Uh oh!

codecov Bot commented Feb 16, 2026 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Codecov Report

Uh oh!

coderabbitai Bot left a comment

Choose a reason for hiding this comment

Uh oh!

nvtw commented Feb 16, 2026

Uh oh!

nvtw left a comment

Choose a reason for hiding this comment

Uh oh!

nvtw commented Feb 16, 2026

Uh oh!

coderabbitai Bot left a comment

Choose a reason for hiding this comment

Uh oh!

Uh oh!

Uh oh!

coderabbitai Bot left a comment

Choose a reason for hiding this comment

Uh oh!

Uh oh!

Uh oh!

coderabbitai Bot left a comment

Choose a reason for hiding this comment

Uh oh!

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

2 participants

vreutskyy commented Feb 16, 2026 •

edited by coderabbitai Bot

Loading

coderabbitai Bot commented Feb 16, 2026 •

edited

Loading

codecov Bot commented Feb 16, 2026 •

edited

Loading