Disable dynamics testing for UR5e and Apollo tests to avoid CI flakiness#1755
Merged
adenzler-nvidia merged 1 commit intoFeb 24, 2026
Conversation
Contributor
📝 WalkthroughWalkthroughTwo MUJOCO Menagerie test configurations were modified to disable stepping by setting Changes
Estimated code review effort🎯 1 (Trivial) | ⏱️ ~3 minutes Possibly related PRs
Suggested reviewers
🚥 Pre-merge checks | ✅ 3✅ Passed checks (3 passed)
✏️ Tip: You can configure your own custom pre-merge checks in the settings. ✨ Finishing Touches
🧪 Generate unit tests (beta)
Thanks for using CodeRabbit! It's free for OSS, and your support helps us grow. If you like it, consider giving us a shout-out. Comment |
0856249 to
c9ee20e
Compare
Set num_steps to 0 for TestMenagerie_UniversalRobotsUr5e and TestMenagerie_ApptronikApollo to avoid CI flakiness. The tests still verify model equivalence (structure and parameters) but skip the flaky dynamics simulation loop. With num_steps=0, the simulation loop never executes, so no dynamics steps or comparisons are performed.
c9ee20e to
1bbc715
Compare
Codecov Report✅ All modified and coverable lines are covered by tests. 📢 Thoughts on this report? Let us know! |
Contributor
There was a problem hiding this comment.
🧹 Nitpick comments (1)
newton/tests/test_menagerie_mujoco.py (1)
2402-2403: Consider linking a tracking issue for re-enabling dynamics.Both disablements use
# Disabled to avoid CI flakinesswith no reference to an issue or root-cause investigation. Without a linked ticket, thesenum_steps = 0entries risk being forgotten, leaving dynamics coverage permanently absent for two of the three actively-exercised robots.Additionally, while
num_steps = 0is safe (the loop body never executes andcompare_modelsstill runs), theuse_cuda_graph = Trueon Apollo (Line 2694) anduse_split_pipeline = Trueon UR5e (Line 2410) become dead settings until dynamics is re-enabled — worth noting if those configurations are what surfaced the flakiness in the first place.💡 Suggested comment wording
- # num_steps = 500 # Disabled to avoid CI flakiness + # num_steps = 500 # Disabled to avoid CI flakiness, see https://github.com/newton-physics/newton/issues/XXXX num_steps = 0- # num_steps = 100 # Disabled to avoid CI flakiness + # num_steps = 100 # Disabled to avoid CI flakiness, see https://github.com/newton-physics/newton/issues/XXXX num_steps = 0Would you like me to open a tracking issue to investigate and re-enable the dynamics steps for these two robots?
Also applies to: 2695-2696
🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed. In `@newton/tests/test_menagerie_mujoco.py` around lines 2402 - 2403, The test disables dynamics by setting num_steps = 0 without a tracking ticket and leaves related flags (use_cuda_graph in Apollo, use_split_pipeline in UR5e) effectively dead; add a TODO comment linking a new or existing tracking issue for re-enabling dynamics next to the num_steps = 0 lines, and also guard or disable the dependent flags when num_steps == 0 (e.g., set use_cuda_graph = False and use_split_pipeline = False or wrap their use in a conditional) so tests don’t contain silently ineffective configuration; ensure compare_models behavior remains unchanged and mention the issue ID in the comment.
🤖 Prompt for all review comments with AI agents
Verify each finding against the current code and only fix it if needed.
Nitpick comments:
In `@newton/tests/test_menagerie_mujoco.py`:
- Around line 2402-2403: The test disables dynamics by setting num_steps = 0
without a tracking ticket and leaves related flags (use_cuda_graph in Apollo,
use_split_pipeline in UR5e) effectively dead; add a TODO comment linking a new
or existing tracking issue for re-enabling dynamics next to the num_steps = 0
lines, and also guard or disable the dependent flags when num_steps == 0 (e.g.,
set use_cuda_graph = False and use_split_pipeline = False or wrap their use in a
conditional) so tests don’t contain silently ineffective configuration; ensure
compare_models behavior remains unchanged and mention the issue ID in the
comment.
Contributor
|
Caution Failed to replace (edit) comment. This is likely due to insufficient permissions or the comment being deleted. Error details |
Contributor
There was a problem hiding this comment.
♻️ Duplicate comments (1)
newton/tests/test_menagerie_mujoco.py (1)
2695-2696: Same silent-pass concern asTestMenagerie_UniversalRobotsUr5e.The
self.skipTest()guard proposed above for the base classtest_simulation_equivalencewould also cover this class automatically, so no separate change is needed here beyond thenum_steps = 0assignment.🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed. In `@newton/tests/test_menagerie_mujoco.py` around lines 2695 - 2696, The test sets num_steps = 0 to avoid CI flakiness which causes a silent-pass concern; ensure you leave num_steps = 0 in newton/tests/test_menagerie_mujoco.py and do not add any class-specific skip logic because the base-class guard (test_simulation_equivalence) will call self.skipTest() for subclasses like TestMenagerie_UniversalRobotsUr5e; simply rely on the base-class skip mechanism and keep the num_steps override as-is.
🧹 Nitpick comments (1)
newton/tests/test_menagerie_mujoco.py (1)
2402-2403:num_steps = 0causes the test to silently PASS with no dynamics assertions — prefer an explicitskipTestafter model validation.
range(0)is empty so the entire simulation loop (and allcompare_at_stepcalls) is skipped, but the test exits with status PASSED. This means CI cannot distinguish "dynamics tested and green" from "dynamics silently omitted." The better pattern is to callself.skipTest()insidetest_simulation_equivalenceaftercompare_models()completes, which preserves model-equivalence validation while reporting the dynamics step as SKIPPED to the CI output.The change should be made in the base class
test_simulation_equivalencerather than just here, so it applies consistently to all robots that usenum_steps = 0:♻️ Proposed change in
TestMenagerieBase.test_simulation_equivalence(around line 2067)+ # Skip dynamics if num_steps == 0 (model comparison above still ran) + if self.num_steps == 0: + self.skipTest("Dynamics simulation disabled (num_steps=0) to avoid CI flakiness") + # Main simulation loop max_steps = 500 if self.debug_visual else self.num_stepsWould you like me to open a tracking issue to re-enable these dynamics tests once the underlying flakiness is resolved? This avoids these tests staying disabled indefinitely.
🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed. In `@newton/tests/test_menagerie_mujoco.py` around lines 2402 - 2403, The test currently uses num_steps = 0 which makes the simulation loop a no-op and yields a false PASS; modify TestMenagerieBase.test_simulation_equivalence to check if self.num_steps == 0 after calling compare_models() and call self.skipTest("dynamics tests disabled (num_steps=0)") so model-equivalence validation still runs but the dynamics portion is reported as SKIPPED; implement this logic in the base method (TestMenagerieBase.test_simulation_equivalence) rather than per-test so all subclasses using num_steps = 0 inherit the skip behavior.
🤖 Prompt for all review comments with AI agents
Verify each finding against the current code and only fix it if needed.
Duplicate comments:
In `@newton/tests/test_menagerie_mujoco.py`:
- Around line 2695-2696: The test sets num_steps = 0 to avoid CI flakiness which
causes a silent-pass concern; ensure you leave num_steps = 0 in
newton/tests/test_menagerie_mujoco.py and do not add any class-specific skip
logic because the base-class guard (test_simulation_equivalence) will call
self.skipTest() for subclasses like TestMenagerie_UniversalRobotsUr5e; simply
rely on the base-class skip mechanism and keep the num_steps override as-is.
---
Nitpick comments:
In `@newton/tests/test_menagerie_mujoco.py`:
- Around line 2402-2403: The test currently uses num_steps = 0 which makes the
simulation loop a no-op and yields a false PASS; modify
TestMenagerieBase.test_simulation_equivalence to check if self.num_steps == 0
after calling compare_models() and call self.skipTest("dynamics tests disabled
(num_steps=0)") so model-equivalence validation still runs but the dynamics
portion is reported as SKIPPED; implement this logic in the base method
(TestMenagerieBase.test_simulation_equivalence) rather than per-test so all
subclasses using num_steps = 0 inherit the skip behavior.
vreutskyy
approved these changes
Feb 24, 2026
vastsoun
added a commit
to vastsoun/newton
that referenced
this pull request
Mar 3, 2026
* [Warp Raytrace] Added device parameter (newton-physics#1544) * [Warp Raytrace] Added device parameter to previously overlooked call (newton-physics#1545) * SolverMuJoCo: Fix tolerance clamping in update_solver_options_kernel (newton-physics#1546) * Change default shape_ke to align with MuJoCo, parse geom solref from MJCF for contact stiffness/damping (newton-physics#1491) Signed-off-by: Alain Denzler <adenzler@nvidia.com> * Fix log_shapes broadcasting for length-1 warp arrays (newton-physics#1550) * Fix XPBD restitution particle index (newton-physics#1557) * Out-of-Bound memory read in example_diffsim_bear newton-physics#1386 (newton-physics#1533) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Add versioned documentation deployment to GitHub Pages (newton-physics#1560) * Fix broken documentation links after versioned docs deployment (newton-physics#1566) * VBD New Features (newton-physics#1479) Co-authored-by: Claude Sonnet 4.5 <noreply@anthropic.com> * Add banners to membership verification workflow steps (newton-physics#1569) * Support cable junctions (newton-physics#1519) Signed-off-by: JC <jumyungc@nvidia.com> * Rename parameter I to inertia newton-physics#1543 (newton-physics#1551) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Fix example_robot_anymal_c_walk.py (newton-physics#1574) * Change everywhere linesearch to iterative (newton-physics#1573) * Remove standard collision pipeline (newton-physics#1538) * USD Plumbing MJC solver attributes through resolver and custom attribute framework (newton-physics#1463) Signed-off-by: Milad Rakhsha <mrakhsha@nvidia.com> Signed-off-by: Milad-Rakhsha-NV <167464435+Milad-Rakhsha-NV@users.noreply.github.com> Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> * Fix child shape filtering (newton-physics#1559) * Fix ViewerRerun ignoring hidden parameter in log_mesh and log_instances (newton-physics#1555) * Make NxN and SAP broad phase respect filtered pairs (newton-physics#1554) * Add --quiet flag to examples to suppress Warp messages (newton-physics#1585) * Defer resolution of MESH_MAXHULLVERT default in importers (newton-physics#1587) * Fix TypeError when finalizing SDF geometry with device kwarg (newton-physics#1586) * Make MESH_MAXHULLVERT a static class attribute Mesh.MAX_HULL_VERTICES. (newton-physics#1598) * Significant non-determinism in unified collision pipeline for anymal_c_walking example newton-physics#1505 (newton-physics#1588) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Add test for non-contiguous case (newton-physics#1549) * Fix nightly Warp CI to resolve pre-release builds (newton-physics#1606) * Verify default class and value handling (newton-physics#1556) * SolverMuJoCo: Expand geom_margin to avoid OOB read with heterogeneous worlds (newton-physics#1607) * Fix bug in control clear method (newton-physics#1602) * Enable Use of Newton IK in Lab newton-physics#662 (newton-physics#1539) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Fix import of non-articulated joints (newton-physics#1535) * Deduplicate _process_joint_custom_attributes frequency handling (newton-physics#1584) * Add CI check for stale API docs and fix local build warnings (newton-physics#1570) * Update Pillow 12.0.0 to 12.1.1 (newton-physics#1612) * Prepare handling of mimic constraints in Newton (newton-physics#1523) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Support floating, base_joint and parent_body arguments for importers (newton-physics#1498) * Fix contact buffer memory overestimation (newton-physics#1614) * Configure banned-module-level-imports for ruff (newton-physics#1583) * Explicit `Contacts` instantiation with `Model.contacts()` and `CollisionPipeline.contacts()` (newton-physics#1445) * Fix the quadruped benchmark regression (newton-physics#1615) * Change default ignore_inertial_definitions from True to False (newton-physics#1537) * Finalize the Recording API (newton-physics#1600) * SolverMuJoCo: Fix ccd_iterations default (newton-physics#1631) * update gitignore to ignore Claude Code sandbox files (newton-physics#1628) * Add mimic joint support to SolverMuJoCo (newton-physics#1627) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Add --no-cache-clear flag to test runner (newton-physics#1629) * Update MuJoCo and MuJoCo Warp to 3.5.0 release (newton-physics#1633) * Improve inertia parsing from USD (newton-physics#1605) Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com> * Remove standalone .typos.toml in favor of pyproject.toml config (newton-physics#1642) * Heightfield support newton-physics#1189 (newton-physics#1547) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Example_robot_policy: Replace ValueError with clean error for missing PhysX policy (newton-physics#1636) Co-authored-by: Viktor Reutskyy <33062116+vreutskyy@users.noreply.github.com> * Avoid unnecessary inflation of the contact reduction voxel aabb (newton-physics#1650) * Rename num_worlds to world_count (newton-physics#1634) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Support parsing autolimits from MJCF (newton-physics#1651) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Fix particle-shape restitution ignoring body velocity (newton-physics#1273) (newton-physics#1580) * Add overflow warnings for narrow-phase collision buffers (newton-physics#1643) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Documentation: add units to model/state docstrings (newton-physics#1649) * fix(viewer): add missing JointType.BALL support to contact line kernel (newton-physics#1640) * Make terrain mesh visual-only in anymal C walking example (newton-physics#1660) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Fix initialization of collider state in MPM finite difference mode (newton-physics#1652) * docs: document ModelBuilder.default_shape_cfg (newton-physics#1662) * Finalize the collision API (newton-physics#1581) * Remove hardcoded subnet ID from AWS workflow (newton-physics#1664) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Attempt to fix AWS config (newton-physics#1666) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Update AWS workflows to g7e.2xlarge with multi-AZ failover (newton-physics#1669) * fix(viewer-usd): disambiguate log_points colors for N=3 warp arrays (newton-physics#1661) * Viewer gl optimizations (newton-physics#1656) Signed-off-by: Miles Macklin <mmacklin@nvidia.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> Co-authored-by: Eric Heiden <eheiden@nvidia.com> * docs: add articulation workflow guidance and regression check (newton-physics#1663) * fix(examples): propagate IK solution to model state in Franka example (newton-physics#1637) * fix(deps,docs): bump nbconvert to 7.17.0 and fix ArticulationView doctest (newton-physics#1670) * Cleanup and improve some example (newton-physics#1625) Signed-off-by: adenzler-nvidia <adenzler@nvidia.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> * Handle zero-mass bodies and flip ensure_nonstatic_links default (newton-physics#1635) * Additional testing for ArticulationView (newton-physics#1527) Co-authored-by: Eric Heiden <eheiden@nvidia.com> * Update warp-lang nightly to 1.12.0.dev20260217 (newton-physics#1677) * Change default friction coefficients to match MuJoCo (newton-physics#1681) * Refactor mesh creation functions (newton-physics#1654) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Parse joint frictionloss from MJCF (newton-physics#1680) * Fix free joint body_pos and add ref/qpos0 support for MuJoCo solver (newton-physics#1645) * Fix root shapes in ArticulationView with fixed base (newton-physics#1639) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Use model collision methods and remove `create_collision_pipeline` from examples (newton-physics#1648) Co-authored-by: nvtw <110816143+nvtw@users.noreply.github.com> * Fix XPBD apply_joint_forces ignoring child joint transform (newton-physics#1582) * Adjust SDF API (newton-physics#1644) Co-authored-by: Eric Heiden <eheiden@nvidia.com> * Optimize test suite runtime (~18% faster) (newton-physics#1689) * Remove ensure_nonstatic_links option from importers (newton-physics#1682) Signed-off-by: adenzler-nvidia <adenzler@nvidia.com> * SolverMuJoCo: Add geom_margin support, align thickness default with MuJoCo and schemas (newton-physics#1653) * refactor: privatize non-public solver internals (newton-physics#1683) * Fix option parsing with multiple <option> elements from includes (newton-physics#1692) * Bump warp-lang nightly and newton-usd-schemas (newton-physics#1693) * Get rid of tkinter dependency (newton-physics#1676) * Fix SDF example contact buffer overflow (newton-physics#1695) * Fix implicit biastype for position/velocity actuator shortcuts (newton-physics#1678) * Fix include processor to respect meshdir/texturedir (newton-physics#1685) * Reduce cold-cache Warp compile time for geometry modules (newton-physics#1618) Co-authored-by: Cursor <cursoragent@cursor.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> * Fix xyzw-to-wxyz quaternion conversion in body inertia kernel (newton-physics#1694) * Rename key to label and add hierarchical labels (newton-physics#1592) (newton-physics#1632) * Expose geometry SDF helpers on public API (newton-physics#1684) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Improve custom frequency handling from USD, parse MuJoCo actuators and tendons (newton-physics#1510) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Collapse fixed joints with non articulated bodies (newton-physics#1608) * Fix renaming joint_key -> joint_label (newton-physics#1700) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Bump .python-version from 3.11 to 3.12 (newton-physics#1702) * Replace CITATION.md with CITATION.cff (newton-physics#1706) * Respect MJCF contype=conaffinity=0 via collision_group=0 (newton-physics#1703) * Make ViewerUSD reuse existing USD layers for the same output path (newton-physics#1704) Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Remove dead up-axis conversion from MuJoCo solver (newton-physics#1707) * Skip IK cube stacking example test (newton-physics#1713) * Fix global pairs (world=-1) not exported to MuJoCo spec (newton-physics#1705) * Reduce the memory consumption of hydroelastic contacts (newton-physics#1609) * Fix flakiness cube stacking (newton-physics#1714) * Fix collision shapes not toggleable in viewer UI (newton-physics#1715) * Fix softbody examples table layout in README (newton-physics#1716) * Standardize sensor APIs: label matching, keyword args, and update() method naming (newton-physics#1665) * Fix intermittent crash in parallel test runner from Manager proxy race (newton-physics#1721) * Clean up inertia.py function arguments to match Mesh.create_* API (newton-physics#1719) * Reduce default test runner verbosity (newton-physics#1723) * Add menagerie comparison tests for SolverMuJoCo (newton-physics#1720) Signed-off-by: Alain Denzler <adenzler@nvidia.com> Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> Co-authored-by: Viktor Reutskyy <vreutskyy@nvidia.com> Co-authored-by: Viktor Reutskyy <33062116+vreutskyy@users.noreply.github.com> * Add spatial tendon support for MuJoCo solver (newton-physics#1687) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Expose qfrc_actuator from mujoco (newton-physics#1698) * Skip non-MODEL custom attributes in finalize validation (newton-physics#1734) * Resolve inheritrange for position actuators in MJCF parser (newton-physics#1727) * Support dampratio for position/velocity actuator shortcuts (newton-physics#1722) * Limit concurrency to 1 (newton-physics#1736) * Add a helper method for checking applied usd (newton-physics#1731) * Enhance playback URL handling in ViewerViser (newton-physics#1742) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Removed RenderShapeType (newton-physics#1748) * Override only MassAPI attributes that have been authored (newton-physics#1688) * Integration of newton-actuators (newton-physics#1342) Signed-off-by: jvonmuralt <jvonmuralt@nvidia.com> * Fix ArticulationView crash with fixed-joint-only articulations (newton-physics#1726) * Improve retrieval of Jupyter base URL in ViewerViser (newton-physics#1750) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Disable dynamics testing for UR5e and Apollo tests to avoid CI flakiness (newton-physics#1755) * Margin and Gap rename (newton-physics#1732) * Vbd Demos Fixing (newton-physics#1740) * Fix ViewerViser.log_lines method (newton-physics#1764) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Update warp-lang dependency to 1.12.0rc1 (newton-physics#1763) * Fix fromto capsule/cylinder orientation in MJCF parser (newton-physics#1741) * fix: multi-world particle BVH indexing (newton-physics#1641) Co-authored-by: Eric Heiden <eheiden@nvidia.com> * Clean up unused and internal-only kwargs in SolverMuJoCo (newton-physics#1766) * Parsing of the mimic joint and contact gap/margin from newton schemas (newton-physics#1690) Signed-off-by: Milad Rakhsha <mrakhsha@nvidia.com> * API Refactor v2 (newton-physics#1749) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Support explicit geom mass attributes in MJCF (newton-physics#1744) * Bump flask and werkzeug in lockfile for security (newton-physics#1769) Co-authored-by: Cursor <cursoragent@cursor.com> * Split MJCF worldbody root bodies into separate articulations (newton-physics#1754) * Expose VBD rigid contact forces for solver coupling (newton-physics#1745) Signed-off-by: JC <jumyungc@nvidia.com> * Add MJCF ellipsoid geom import and regression test (newton-physics#1772) Co-authored-by: Cursor <cursoragent@cursor.com> * Weld equality constraints parsed from mjcf are given Nan as the default value of torquescale. The correct default should be 1.0 (newton-physics#1760) * Improve picking accuracy and stability (newton-physics#1712) * Franka cloth demo improvement (newton-physics#1765) * Support computing sensing object transforms & API cleanup (newton-physics#1759) * Remove threading workaround (newton-physics#1751) * [Warp Raytrace] Consolidated ray intersect functions, renamed Options to Config (newton-physics#1767) * Improve README example gallery for PyPI compatibility (newton-physics#1776) * Fix issue with mesh in rerun viewer (newton-physics#1768) * Add PhysxMimicJointAPI parsing to USD importer (newton-physics#1735) * Move some math functions to Warp (newton-physics#1717) Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Add test to ensure MJCF xform argument is relative (newton-physics#1777) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Emit diaginertia instead of fullinertia for diagonal body inertia (newton-physics#1780) * Change default joint armature from 0.01 to 0 (newton-physics#1782) * Fix default kp/kv for position and velocity actuators (newton-physics#1786) * Lock body inertia after explicit MJCF <inertial> element (newton-physics#1784) * Fix for MJCF actuator custom attributes (newton-physics#1783) * Bump version to 0.2.3 Prepare the package metadata for the v0.2.3 release tag. * Fix ViewerRerun rendering of instances from hidden meshes (newton-physics#1788) * API cleanup (newton-physics#1789) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * BODY actuator target name bypasses body name de-duplication in SolverMuJoCo (newton-physics#1729) * Use default density for visual geoms in MJCF import (newton-physics#1781) * Fix GL viewer crash on Wayland (newton-physics#1793) * Make USD xform parameter control absolute articulation placement (newton-physics#1771) * Fix CUDA context corruption in SDF implementation (newton-physics#1792) * Bump mujoco-warp dependency to 3.5.0.2 (newton-physics#1779) * Fix MuJoCo margin/gap conversion (newton-physics#1785) * Bump version to 1.1.0.dev0 (newton-physics#1798) * Missing unittest.main added back to test_import_mjcf.py. Helps with F5 debugging in VS Code. (newton-physics#1796) * Improve H1 example (newton-physics#1801) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Fix ViewerViser.set_camera() (newton-physics#1805) * Rename examples to follow prefix-first naming convention (newton-physics#1802) * Improve MuJoCo actuator domain randomization (newton-physics#1773) * Restore in_cup test in hydro example (newton-physics#1775) * Fix `newton.geometry` imports and change of Mesh maxhullverts global constant * Adapt to having both margin and gap arrays for each geom/shape * Fix for newton.geometry API changes in primitive/narrowphase.py * Fix removal of `BroadPhaseMode` IntEnum and revert to newton-sytle string literals * WIP: Adapt geometry/unified.py to fix breaking changes to `newton.geometry` API * First pass of API adjustments * Patch more gaps (with respect to margin and gap renaming) * GeoType.SDF was removed - reflect that in Kamino * Introduce CoM position offsets w.r.t body frame and operations to convert between body CoM state and generic local body-fixed reference frames. * Add caching of per-entity labels/names/keys in the Model subcontainers * Remove SDF shape wrapper since it's now internal to mesh handling in CD pipelines * Fix USD test assets * Add Newton <--> Kamino joint type conversion operations and per-space default limit constants * Add some cleanup to geometry and unified CD + UTs * Add Newton <--> Kamino shape type conversion operations * Apply new default joint coord limit constants to limits.py * Adapt foubrar model builder and USD asset to produce the same result in sim example * Purge "physical" goems and collapse all into a single group, and purge geometry "layers" * Disable allocation per-joint wrenches by default and make them optional * Make `Model` a dataclass * Separate ModelData* containers into own `core/data.py` module * Fix imports of ModelData * Rename `Model` as `ModelKamino` * Rename `ModelData` as `DataKamino` * Rename `State` as `StateKamino` * Rename `Control` as `ControlKamino` * Rename `Limits` as `LimitsKamino` * Rename `Contacts` as `ContactsKamino` * Rename `ModelBuilder` as `ModelBuilderKamino` * Make imports in test utilities relative * Revise CD meta-data attributes and their computation in GeometryModel and ModelBuilderKamino * Revise primitive CD pipeline * Revise unified CD pipeline * Revise CD front-end interfaces * Fix UTs and relevant utils for interface changes to CD * Change to `wp.DeviceLike` to account for upcoming deprecation of `Devicelike` * Depracate legacy HDF5 data io (will be replaced in the future) * Fix banned imports at module level * Modify USD importer to detect articulations and order geoms and joints similarly to how the Newton `parse_usd` function does. * Add conversion operation from `newton.Model` to `ModelKamino` * Add data, state and control container conversions * Add SolverKamino wrapper that fullfils newton integration interface * Add newton integration examples * Add SolverKamino to newton solver module imports * WIP: fix problem with lambda_j being allocated for only kinematic constraints and failing on array copying * Fix banned git import in benchmark * Rename *Settings to *Config (#213) * Rename SolverKaminoSettings -> SolverKaminoConfig * Rename DualProblemSettings -> DualProblemConfig * Rename CollisionDetectorSettings -> CollisionDetectorConfig * Rename PADMMSettings -> PADMMConfig * Rename ForwardKinematicsSolverSettings -> ForwardKinematicsSolverConfig * Rename SimulatorSettings -> SimulatorConfig * Add check for model compatibility in SolverKamino (#209) * Fix device assignment in sparse CG test on CPU (#216) * Replace Enum-type config attributes with Literal (#215) * Replace warmstart mode config param with literal * Replace contact warmstart mode config param with literal * Replace rotation correction config param with literal * Replace penalty update config param with literal * Replace FK preconditioner option config param with literal * Add post-init checks for dual/PADMM configs * Rename FKPreconditionerOptions to FKPreconditionerType * Remove WorldDescriptor from ModelKamino (#219) * Add geom index offset array to model info * Replace access to world description in model * Remove world descriptor from model * Fix computation of kinematics residual with sparse Jacobian (#220) * Migrates `ModelKaminoSize` to it's own module to avoid circular dependency between core/model.py and core/state.py and rename it as `SizeKamino`. * WIP: Fix SolverKamino wrapper * Fix circular dependency in conversions.py * Fix some broken unit tests and WIP to fix fourbar contact conversions and rendering * Make some conversions @staticmethods instead, because they dont need common class attributes * Fix declaration of custom state attributes and their conversion to/from newton and kamino * WIP: Debug model conversion and newton sim examples * Rename and cleanup start index array of per-world geoms * Model conversion and newton sim examples now work. * Make gravity conversion operation re-usable * Migrates boxes_fourbar builder using newton.ModelBuilder to it's own module to prepare for migration. * Use gravity conversion utility func in SolverKamino * Add reusable joint-parameterization conversion utility * Remove world-descriptor from model converter * Rename helper converter that handles entity-local transforms * Add some cleanup to DR Legs, ANYmal D and basic four-bar examples * Fix module-level imports of additional kamino-specific development dependencies * Fix module-level imports of additional kamino-specific development dependencies * Fix erroneous merge conflict. --------- Signed-off-by: Alain Denzler <adenzler@nvidia.com> Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> Signed-off-by: JC <jumyungc@nvidia.com> Signed-off-by: Milad Rakhsha <mrakhsha@nvidia.com> Signed-off-by: Milad-Rakhsha-NV <167464435+Milad-Rakhsha-NV@users.noreply.github.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Miles Macklin <mmacklin@nvidia.com> Signed-off-by: adenzler-nvidia <adenzler@nvidia.com> Signed-off-by: jvonmuralt <jvonmuralt@nvidia.com> Co-authored-by: Daniela Hase <116915287+daniela-hase@users.noreply.github.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> Co-authored-by: Viktor Reutskyy <33062116+vreutskyy@users.noreply.github.com> Co-authored-by: Eric Shi <97630937+shi-eric@users.noreply.github.com> Co-authored-by: Anka Chen <AnkaChan@users.noreply.github.com> Co-authored-by: Claude Sonnet 4.5 <noreply@anthropic.com> Co-authored-by: JC-nvidia <116605903+jumyungc@users.noreply.github.com> Co-authored-by: Kenny Vilella <kvilella@nvidia.com> Co-authored-by: nvtw <110816143+nvtw@users.noreply.github.com> Co-authored-by: Milad-Rakhsha-NV <167464435+Milad-Rakhsha-NV@users.noreply.github.com> Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com> Co-authored-by: Lennart Röstel <65088822+lenroe@users.noreply.github.com> Co-authored-by: Eric Heiden <eheiden@nvidia.com> Co-authored-by: jvonmuralt <jvonmuralt@nvidia.com> Co-authored-by: camevor <camevor@nvidia.com> Co-authored-by: mzamoramora-nvidia <mzamoramora@nvidia.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com> Co-authored-by: Alessandro Roncone <alecive87@gmail.com> Co-authored-by: gdaviet <57617656+gdaviet@users.noreply.github.com> Co-authored-by: Miles Macklin <mmacklin@nvidia.com> Co-authored-by: Gordon Yeoman <gyeomannvidia@users.noreply.github.com> Co-authored-by: Lukasz Wawrzyniak <lwawrzyniak@nvidia.com> Co-authored-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Cursor <cursoragent@cursor.com> Co-authored-by: Viktor Reutskyy <vreutskyy@nvidia.com> Co-authored-by: Lorenzo Terenzi <lorenzoterenzi96@gmail.com> Co-authored-by: smollerNV <164020096+smollerNV@users.noreply.github.com> Co-authored-by: twidmer <twidmer@nvidia.com> Co-authored-by: Christian Schumacher <christian.schumacher@disney.com> Co-authored-by: Guirec-Maloisel <25688871+Guirec-Maloisel@users.noreply.github.com>
vastsoun
added a commit
to vastsoun/newton
that referenced
this pull request
Mar 4, 2026
* [Warp Raytrace] Added device parameter (newton-physics#1544) * [Warp Raytrace] Added device parameter to previously overlooked call (newton-physics#1545) * SolverMuJoCo: Fix tolerance clamping in update_solver_options_kernel (newton-physics#1546) * Change default shape_ke to align with MuJoCo, parse geom solref from MJCF for contact stiffness/damping (newton-physics#1491) Signed-off-by: Alain Denzler <adenzler@nvidia.com> * Fix log_shapes broadcasting for length-1 warp arrays (newton-physics#1550) * Fix XPBD restitution particle index (newton-physics#1557) * Out-of-Bound memory read in example_diffsim_bear newton-physics#1386 (newton-physics#1533) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Add versioned documentation deployment to GitHub Pages (newton-physics#1560) * Fix broken documentation links after versioned docs deployment (newton-physics#1566) * VBD New Features (newton-physics#1479) Co-authored-by: Claude Sonnet 4.5 <noreply@anthropic.com> * Add banners to membership verification workflow steps (newton-physics#1569) * Support cable junctions (newton-physics#1519) Signed-off-by: JC <jumyungc@nvidia.com> * Rename parameter I to inertia newton-physics#1543 (newton-physics#1551) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Fix example_robot_anymal_c_walk.py (newton-physics#1574) * Change everywhere linesearch to iterative (newton-physics#1573) * Remove standard collision pipeline (newton-physics#1538) * USD Plumbing MJC solver attributes through resolver and custom attribute framework (newton-physics#1463) Signed-off-by: Milad Rakhsha <mrakhsha@nvidia.com> Signed-off-by: Milad-Rakhsha-NV <167464435+Milad-Rakhsha-NV@users.noreply.github.com> Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> * Fix child shape filtering (newton-physics#1559) * Fix ViewerRerun ignoring hidden parameter in log_mesh and log_instances (newton-physics#1555) * Make NxN and SAP broad phase respect filtered pairs (newton-physics#1554) * Add --quiet flag to examples to suppress Warp messages (newton-physics#1585) * Defer resolution of MESH_MAXHULLVERT default in importers (newton-physics#1587) * Fix TypeError when finalizing SDF geometry with device kwarg (newton-physics#1586) * Make MESH_MAXHULLVERT a static class attribute Mesh.MAX_HULL_VERTICES. (newton-physics#1598) * Significant non-determinism in unified collision pipeline for anymal_c_walking example newton-physics#1505 (newton-physics#1588) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Add test for non-contiguous case (newton-physics#1549) * Fix nightly Warp CI to resolve pre-release builds (newton-physics#1606) * Verify default class and value handling (newton-physics#1556) * SolverMuJoCo: Expand geom_margin to avoid OOB read with heterogeneous worlds (newton-physics#1607) * Fix bug in control clear method (newton-physics#1602) * Enable Use of Newton IK in Lab newton-physics#662 (newton-physics#1539) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Fix import of non-articulated joints (newton-physics#1535) * Deduplicate _process_joint_custom_attributes frequency handling (newton-physics#1584) * Add CI check for stale API docs and fix local build warnings (newton-physics#1570) * Update Pillow 12.0.0 to 12.1.1 (newton-physics#1612) * Prepare handling of mimic constraints in Newton (newton-physics#1523) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Support floating, base_joint and parent_body arguments for importers (newton-physics#1498) * Fix contact buffer memory overestimation (newton-physics#1614) * Configure banned-module-level-imports for ruff (newton-physics#1583) * Explicit `Contacts` instantiation with `Model.contacts()` and `CollisionPipeline.contacts()` (newton-physics#1445) * Fix the quadruped benchmark regression (newton-physics#1615) * Change default ignore_inertial_definitions from True to False (newton-physics#1537) * Finalize the Recording API (newton-physics#1600) * SolverMuJoCo: Fix ccd_iterations default (newton-physics#1631) * update gitignore to ignore Claude Code sandbox files (newton-physics#1628) * Add mimic joint support to SolverMuJoCo (newton-physics#1627) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Add --no-cache-clear flag to test runner (newton-physics#1629) * Update MuJoCo and MuJoCo Warp to 3.5.0 release (newton-physics#1633) * Improve inertia parsing from USD (newton-physics#1605) Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com> * Remove standalone .typos.toml in favor of pyproject.toml config (newton-physics#1642) * Heightfield support newton-physics#1189 (newton-physics#1547) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Example_robot_policy: Replace ValueError with clean error for missing PhysX policy (newton-physics#1636) Co-authored-by: Viktor Reutskyy <33062116+vreutskyy@users.noreply.github.com> * Avoid unnecessary inflation of the contact reduction voxel aabb (newton-physics#1650) * Rename num_worlds to world_count (newton-physics#1634) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Support parsing autolimits from MJCF (newton-physics#1651) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Fix particle-shape restitution ignoring body velocity (newton-physics#1273) (newton-physics#1580) * Add overflow warnings for narrow-phase collision buffers (newton-physics#1643) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Documentation: add units to model/state docstrings (newton-physics#1649) * fix(viewer): add missing JointType.BALL support to contact line kernel (newton-physics#1640) * Make terrain mesh visual-only in anymal C walking example (newton-physics#1660) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Fix initialization of collider state in MPM finite difference mode (newton-physics#1652) * docs: document ModelBuilder.default_shape_cfg (newton-physics#1662) * Finalize the collision API (newton-physics#1581) * Remove hardcoded subnet ID from AWS workflow (newton-physics#1664) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Attempt to fix AWS config (newton-physics#1666) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Update AWS workflows to g7e.2xlarge with multi-AZ failover (newton-physics#1669) * fix(viewer-usd): disambiguate log_points colors for N=3 warp arrays (newton-physics#1661) * Viewer gl optimizations (newton-physics#1656) Signed-off-by: Miles Macklin <mmacklin@nvidia.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> Co-authored-by: Eric Heiden <eheiden@nvidia.com> * docs: add articulation workflow guidance and regression check (newton-physics#1663) * fix(examples): propagate IK solution to model state in Franka example (newton-physics#1637) * fix(deps,docs): bump nbconvert to 7.17.0 and fix ArticulationView doctest (newton-physics#1670) * Cleanup and improve some example (newton-physics#1625) Signed-off-by: adenzler-nvidia <adenzler@nvidia.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> * Handle zero-mass bodies and flip ensure_nonstatic_links default (newton-physics#1635) * Additional testing for ArticulationView (newton-physics#1527) Co-authored-by: Eric Heiden <eheiden@nvidia.com> * Update warp-lang nightly to 1.12.0.dev20260217 (newton-physics#1677) * Change default friction coefficients to match MuJoCo (newton-physics#1681) * Refactor mesh creation functions (newton-physics#1654) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Parse joint frictionloss from MJCF (newton-physics#1680) * Fix free joint body_pos and add ref/qpos0 support for MuJoCo solver (newton-physics#1645) * Fix root shapes in ArticulationView with fixed base (newton-physics#1639) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Use model collision methods and remove `create_collision_pipeline` from examples (newton-physics#1648) Co-authored-by: nvtw <110816143+nvtw@users.noreply.github.com> * Fix XPBD apply_joint_forces ignoring child joint transform (newton-physics#1582) * Adjust SDF API (newton-physics#1644) Co-authored-by: Eric Heiden <eheiden@nvidia.com> * Optimize test suite runtime (~18% faster) (newton-physics#1689) * Remove ensure_nonstatic_links option from importers (newton-physics#1682) Signed-off-by: adenzler-nvidia <adenzler@nvidia.com> * SolverMuJoCo: Add geom_margin support, align thickness default with MuJoCo and schemas (newton-physics#1653) * refactor: privatize non-public solver internals (newton-physics#1683) * Fix option parsing with multiple <option> elements from includes (newton-physics#1692) * Bump warp-lang nightly and newton-usd-schemas (newton-physics#1693) * Get rid of tkinter dependency (newton-physics#1676) * Fix SDF example contact buffer overflow (newton-physics#1695) * Fix implicit biastype for position/velocity actuator shortcuts (newton-physics#1678) * Fix include processor to respect meshdir/texturedir (newton-physics#1685) * Reduce cold-cache Warp compile time for geometry modules (newton-physics#1618) Co-authored-by: Cursor <cursoragent@cursor.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> * Fix xyzw-to-wxyz quaternion conversion in body inertia kernel (newton-physics#1694) * Rename key to label and add hierarchical labels (newton-physics#1592) (newton-physics#1632) * Expose geometry SDF helpers on public API (newton-physics#1684) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Improve custom frequency handling from USD, parse MuJoCo actuators and tendons (newton-physics#1510) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Collapse fixed joints with non articulated bodies (newton-physics#1608) * Fix renaming joint_key -> joint_label (newton-physics#1700) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Bump .python-version from 3.11 to 3.12 (newton-physics#1702) * Replace CITATION.md with CITATION.cff (newton-physics#1706) * Respect MJCF contype=conaffinity=0 via collision_group=0 (newton-physics#1703) * Make ViewerUSD reuse existing USD layers for the same output path (newton-physics#1704) Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Remove dead up-axis conversion from MuJoCo solver (newton-physics#1707) * Skip IK cube stacking example test (newton-physics#1713) * Fix global pairs (world=-1) not exported to MuJoCo spec (newton-physics#1705) * Reduce the memory consumption of hydroelastic contacts (newton-physics#1609) * Fix flakiness cube stacking (newton-physics#1714) * Fix collision shapes not toggleable in viewer UI (newton-physics#1715) * Fix softbody examples table layout in README (newton-physics#1716) * Standardize sensor APIs: label matching, keyword args, and update() method naming (newton-physics#1665) * Fix intermittent crash in parallel test runner from Manager proxy race (newton-physics#1721) * Clean up inertia.py function arguments to match Mesh.create_* API (newton-physics#1719) * Reduce default test runner verbosity (newton-physics#1723) * Add menagerie comparison tests for SolverMuJoCo (newton-physics#1720) Signed-off-by: Alain Denzler <adenzler@nvidia.com> Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> Co-authored-by: Viktor Reutskyy <vreutskyy@nvidia.com> Co-authored-by: Viktor Reutskyy <33062116+vreutskyy@users.noreply.github.com> * Add spatial tendon support for MuJoCo solver (newton-physics#1687) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Expose qfrc_actuator from mujoco (newton-physics#1698) * Skip non-MODEL custom attributes in finalize validation (newton-physics#1734) * Resolve inheritrange for position actuators in MJCF parser (newton-physics#1727) * Support dampratio for position/velocity actuator shortcuts (newton-physics#1722) * Limit concurrency to 1 (newton-physics#1736) * Add a helper method for checking applied usd (newton-physics#1731) * Enhance playback URL handling in ViewerViser (newton-physics#1742) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Removed RenderShapeType (newton-physics#1748) * Override only MassAPI attributes that have been authored (newton-physics#1688) * Integration of newton-actuators (newton-physics#1342) Signed-off-by: jvonmuralt <jvonmuralt@nvidia.com> * Fix ArticulationView crash with fixed-joint-only articulations (newton-physics#1726) * Improve retrieval of Jupyter base URL in ViewerViser (newton-physics#1750) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Disable dynamics testing for UR5e and Apollo tests to avoid CI flakiness (newton-physics#1755) * Margin and Gap rename (newton-physics#1732) * Vbd Demos Fixing (newton-physics#1740) * Fix ViewerViser.log_lines method (newton-physics#1764) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Update warp-lang dependency to 1.12.0rc1 (newton-physics#1763) * Fix fromto capsule/cylinder orientation in MJCF parser (newton-physics#1741) * fix: multi-world particle BVH indexing (newton-physics#1641) Co-authored-by: Eric Heiden <eheiden@nvidia.com> * Clean up unused and internal-only kwargs in SolverMuJoCo (newton-physics#1766) * Parsing of the mimic joint and contact gap/margin from newton schemas (newton-physics#1690) Signed-off-by: Milad Rakhsha <mrakhsha@nvidia.com> * API Refactor v2 (newton-physics#1749) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Support explicit geom mass attributes in MJCF (newton-physics#1744) * Bump flask and werkzeug in lockfile for security (newton-physics#1769) Co-authored-by: Cursor <cursoragent@cursor.com> * Split MJCF worldbody root bodies into separate articulations (newton-physics#1754) * Expose VBD rigid contact forces for solver coupling (newton-physics#1745) Signed-off-by: JC <jumyungc@nvidia.com> * Add MJCF ellipsoid geom import and regression test (newton-physics#1772) Co-authored-by: Cursor <cursoragent@cursor.com> * Weld equality constraints parsed from mjcf are given Nan as the default value of torquescale. The correct default should be 1.0 (newton-physics#1760) * Improve picking accuracy and stability (newton-physics#1712) * Franka cloth demo improvement (newton-physics#1765) * Support computing sensing object transforms & API cleanup (newton-physics#1759) * Remove threading workaround (newton-physics#1751) * [Warp Raytrace] Consolidated ray intersect functions, renamed Options to Config (newton-physics#1767) * Improve README example gallery for PyPI compatibility (newton-physics#1776) * Fix issue with mesh in rerun viewer (newton-physics#1768) * Add PhysxMimicJointAPI parsing to USD importer (newton-physics#1735) * Move some math functions to Warp (newton-physics#1717) Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Add test to ensure MJCF xform argument is relative (newton-physics#1777) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Emit diaginertia instead of fullinertia for diagonal body inertia (newton-physics#1780) * Change default joint armature from 0.01 to 0 (newton-physics#1782) * Fix default kp/kv for position and velocity actuators (newton-physics#1786) * Lock body inertia after explicit MJCF <inertial> element (newton-physics#1784) * Fix for MJCF actuator custom attributes (newton-physics#1783) * Bump version to 0.2.3 Prepare the package metadata for the v0.2.3 release tag. * Fix ViewerRerun rendering of instances from hidden meshes (newton-physics#1788) * API cleanup (newton-physics#1789) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * BODY actuator target name bypasses body name de-duplication in SolverMuJoCo (newton-physics#1729) * Use default density for visual geoms in MJCF import (newton-physics#1781) * Fix GL viewer crash on Wayland (newton-physics#1793) * Make USD xform parameter control absolute articulation placement (newton-physics#1771) * Fix CUDA context corruption in SDF implementation (newton-physics#1792) * Bump mujoco-warp dependency to 3.5.0.2 (newton-physics#1779) * Fix MuJoCo margin/gap conversion (newton-physics#1785) * Bump version to 1.1.0.dev0 (newton-physics#1798) * Missing unittest.main added back to test_import_mjcf.py. Helps with F5 debugging in VS Code. (newton-physics#1796) * Improve H1 example (newton-physics#1801) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Fix ViewerViser.set_camera() (newton-physics#1805) * Rename examples to follow prefix-first naming convention (newton-physics#1802) * Improve MuJoCo actuator domain randomization (newton-physics#1773) * Restore in_cup test in hydro example (newton-physics#1775) * Fix `newton.geometry` imports and change of Mesh maxhullverts global constant * Adapt to having both margin and gap arrays for each geom/shape * Fix for newton.geometry API changes in primitive/narrowphase.py * Fix removal of `BroadPhaseMode` IntEnum and revert to newton-sytle string literals * WIP: Adapt geometry/unified.py to fix breaking changes to `newton.geometry` API * First pass of API adjustments * Patch more gaps (with respect to margin and gap renaming) * GeoType.SDF was removed - reflect that in Kamino * Introduce CoM position offsets w.r.t body frame and operations to convert between body CoM state and generic local body-fixed reference frames. * Add caching of per-entity labels/names/keys in the Model subcontainers * Remove SDF shape wrapper since it's now internal to mesh handling in CD pipelines * Fix USD test assets * Add Newton <--> Kamino joint type conversion operations and per-space default limit constants * Add some cleanup to geometry and unified CD + UTs * Add Newton <--> Kamino shape type conversion operations * Apply new default joint coord limit constants to limits.py * Adapt foubrar model builder and USD asset to produce the same result in sim example * Purge "physical" goems and collapse all into a single group, and purge geometry "layers" * Disable allocation per-joint wrenches by default and make them optional * Make `Model` a dataclass * Separate ModelData* containers into own `core/data.py` module * Fix imports of ModelData * Rename `Model` as `ModelKamino` * Rename `ModelData` as `DataKamino` * Rename `State` as `StateKamino` * Rename `Control` as `ControlKamino` * Rename `Limits` as `LimitsKamino` * Rename `Contacts` as `ContactsKamino` * Rename `ModelBuilder` as `ModelBuilderKamino` * Make imports in test utilities relative * Revise CD meta-data attributes and their computation in GeometryModel and ModelBuilderKamino * Revise primitive CD pipeline * Revise unified CD pipeline * Revise CD front-end interfaces * Fix UTs and relevant utils for interface changes to CD * Change to `wp.DeviceLike` to account for upcoming deprecation of `Devicelike` * Depracate legacy HDF5 data io (will be replaced in the future) * Fix banned imports at module level * Modify USD importer to detect articulations and order geoms and joints similarly to how the Newton `parse_usd` function does. * Add conversion operation from `newton.Model` to `ModelKamino` * Add data, state and control container conversions * Add SolverKamino wrapper that fullfils newton integration interface * Add newton integration examples * Add SolverKamino to newton solver module imports * WIP: fix problem with lambda_j being allocated for only kinematic constraints and failing on array copying * Fix banned git import in benchmark * Rename *Settings to *Config (#213) * Rename SolverKaminoSettings -> SolverKaminoConfig * Rename DualProblemSettings -> DualProblemConfig * Rename CollisionDetectorSettings -> CollisionDetectorConfig * Rename PADMMSettings -> PADMMConfig * Rename ForwardKinematicsSolverSettings -> ForwardKinematicsSolverConfig * Rename SimulatorSettings -> SimulatorConfig * Add check for model compatibility in SolverKamino (#209) * Fix device assignment in sparse CG test on CPU (#216) * Replace Enum-type config attributes with Literal (#215) * Replace warmstart mode config param with literal * Replace contact warmstart mode config param with literal * Replace rotation correction config param with literal * Replace penalty update config param with literal * Replace FK preconditioner option config param with literal * Add post-init checks for dual/PADMM configs * Rename FKPreconditionerOptions to FKPreconditionerType * Remove WorldDescriptor from ModelKamino (#219) * Add geom index offset array to model info * Replace access to world description in model * Remove world descriptor from model * Fix computation of kinematics residual with sparse Jacobian (#220) * Migrates `ModelKaminoSize` to it's own module to avoid circular dependency between core/model.py and core/state.py and rename it as `SizeKamino`. * WIP: Fix SolverKamino wrapper * Fix circular dependency in conversions.py * Fix some broken unit tests and WIP to fix fourbar contact conversions and rendering * Make some conversions @staticmethods instead, because they dont need common class attributes * Fix declaration of custom state attributes and their conversion to/from newton and kamino * WIP: Debug model conversion and newton sim examples * Rename and cleanup start index array of per-world geoms * Model conversion and newton sim examples now work. * Make gravity conversion operation re-usable * Migrates boxes_fourbar builder using newton.ModelBuilder to it's own module to prepare for migration. * Use gravity conversion utility func in SolverKamino * Add reusable joint-parameterization conversion utility * Remove world-descriptor from model converter * Rename helper converter that handles entity-local transforms * Add some cleanup to DR Legs, ANYmal D and basic four-bar examples * Fix module-level imports of additional kamino-specific development dependencies * Fix module-level imports of additional kamino-specific development dependencies * Fix erroneous merge conflict. --------- Signed-off-by: Alain Denzler <adenzler@nvidia.com> Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> Signed-off-by: JC <jumyungc@nvidia.com> Signed-off-by: Milad Rakhsha <mrakhsha@nvidia.com> Signed-off-by: Milad-Rakhsha-NV <167464435+Milad-Rakhsha-NV@users.noreply.github.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Miles Macklin <mmacklin@nvidia.com> Signed-off-by: adenzler-nvidia <adenzler@nvidia.com> Signed-off-by: jvonmuralt <jvonmuralt@nvidia.com> Co-authored-by: Daniela Hase <116915287+daniela-hase@users.noreply.github.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> Co-authored-by: Viktor Reutskyy <33062116+vreutskyy@users.noreply.github.com> Co-authored-by: Eric Shi <97630937+shi-eric@users.noreply.github.com> Co-authored-by: Anka Chen <AnkaChan@users.noreply.github.com> Co-authored-by: Claude Sonnet 4.5 <noreply@anthropic.com> Co-authored-by: JC-nvidia <116605903+jumyungc@users.noreply.github.com> Co-authored-by: Kenny Vilella <kvilella@nvidia.com> Co-authored-by: nvtw <110816143+nvtw@users.noreply.github.com> Co-authored-by: Milad-Rakhsha-NV <167464435+Milad-Rakhsha-NV@users.noreply.github.com> Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com> Co-authored-by: Lennart Röstel <65088822+lenroe@users.noreply.github.com> Co-authored-by: Eric Heiden <eheiden@nvidia.com> Co-authored-by: jvonmuralt <jvonmuralt@nvidia.com> Co-authored-by: camevor <camevor@nvidia.com> Co-authored-by: mzamoramora-nvidia <mzamoramora@nvidia.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com> Co-authored-by: Alessandro Roncone <alecive87@gmail.com> Co-authored-by: gdaviet <57617656+gdaviet@users.noreply.github.com> Co-authored-by: Miles Macklin <mmacklin@nvidia.com> Co-authored-by: Gordon Yeoman <gyeomannvidia@users.noreply.github.com> Co-authored-by: Lukasz Wawrzyniak <lwawrzyniak@nvidia.com> Co-authored-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Cursor <cursoragent@cursor.com> Co-authored-by: Viktor Reutskyy <vreutskyy@nvidia.com> Co-authored-by: Lorenzo Terenzi <lorenzoterenzi96@gmail.com> Co-authored-by: smollerNV <164020096+smollerNV@users.noreply.github.com> Co-authored-by: twidmer <twidmer@nvidia.com> Co-authored-by: Christian Schumacher <christian.schumacher@disney.com> Co-authored-by: Guirec-Maloisel <25688871+Guirec-Maloisel@users.noreply.github.com>
vastsoun
added a commit
to vastsoun/newton
that referenced
this pull request
Mar 4, 2026
* [Warp Raytrace] Added device parameter (newton-physics#1544) * [Warp Raytrace] Added device parameter to previously overlooked call (newton-physics#1545) * SolverMuJoCo: Fix tolerance clamping in update_solver_options_kernel (newton-physics#1546) * Change default shape_ke to align with MuJoCo, parse geom solref from MJCF for contact stiffness/damping (newton-physics#1491) Signed-off-by: Alain Denzler <adenzler@nvidia.com> * Fix log_shapes broadcasting for length-1 warp arrays (newton-physics#1550) * Fix XPBD restitution particle index (newton-physics#1557) * Out-of-Bound memory read in example_diffsim_bear newton-physics#1386 (newton-physics#1533) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Add versioned documentation deployment to GitHub Pages (newton-physics#1560) * Fix broken documentation links after versioned docs deployment (newton-physics#1566) * VBD New Features (newton-physics#1479) Co-authored-by: Claude Sonnet 4.5 <noreply@anthropic.com> * Add banners to membership verification workflow steps (newton-physics#1569) * Support cable junctions (newton-physics#1519) Signed-off-by: JC <jumyungc@nvidia.com> * Rename parameter I to inertia newton-physics#1543 (newton-physics#1551) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Fix example_robot_anymal_c_walk.py (newton-physics#1574) * Change everywhere linesearch to iterative (newton-physics#1573) * Remove standard collision pipeline (newton-physics#1538) * USD Plumbing MJC solver attributes through resolver and custom attribute framework (newton-physics#1463) Signed-off-by: Milad Rakhsha <mrakhsha@nvidia.com> Signed-off-by: Milad-Rakhsha-NV <167464435+Milad-Rakhsha-NV@users.noreply.github.com> Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> * Fix child shape filtering (newton-physics#1559) * Fix ViewerRerun ignoring hidden parameter in log_mesh and log_instances (newton-physics#1555) * Make NxN and SAP broad phase respect filtered pairs (newton-physics#1554) * Add --quiet flag to examples to suppress Warp messages (newton-physics#1585) * Defer resolution of MESH_MAXHULLVERT default in importers (newton-physics#1587) * Fix TypeError when finalizing SDF geometry with device kwarg (newton-physics#1586) * Make MESH_MAXHULLVERT a static class attribute Mesh.MAX_HULL_VERTICES. (newton-physics#1598) * Significant non-determinism in unified collision pipeline for anymal_c_walking example newton-physics#1505 (newton-physics#1588) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Add test for non-contiguous case (newton-physics#1549) * Fix nightly Warp CI to resolve pre-release builds (newton-physics#1606) * Verify default class and value handling (newton-physics#1556) * SolverMuJoCo: Expand geom_margin to avoid OOB read with heterogeneous worlds (newton-physics#1607) * Fix bug in control clear method (newton-physics#1602) * Enable Use of Newton IK in Lab newton-physics#662 (newton-physics#1539) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Fix import of non-articulated joints (newton-physics#1535) * Deduplicate _process_joint_custom_attributes frequency handling (newton-physics#1584) * Add CI check for stale API docs and fix local build warnings (newton-physics#1570) * Update Pillow 12.0.0 to 12.1.1 (newton-physics#1612) * Prepare handling of mimic constraints in Newton (newton-physics#1523) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Support floating, base_joint and parent_body arguments for importers (newton-physics#1498) * Fix contact buffer memory overestimation (newton-physics#1614) * Configure banned-module-level-imports for ruff (newton-physics#1583) * Explicit `Contacts` instantiation with `Model.contacts()` and `CollisionPipeline.contacts()` (newton-physics#1445) * Fix the quadruped benchmark regression (newton-physics#1615) * Change default ignore_inertial_definitions from True to False (newton-physics#1537) * Finalize the Recording API (newton-physics#1600) * SolverMuJoCo: Fix ccd_iterations default (newton-physics#1631) * update gitignore to ignore Claude Code sandbox files (newton-physics#1628) * Add mimic joint support to SolverMuJoCo (newton-physics#1627) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Add --no-cache-clear flag to test runner (newton-physics#1629) * Update MuJoCo and MuJoCo Warp to 3.5.0 release (newton-physics#1633) * Improve inertia parsing from USD (newton-physics#1605) Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com> * Remove standalone .typos.toml in favor of pyproject.toml config (newton-physics#1642) * Heightfield support newton-physics#1189 (newton-physics#1547) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Example_robot_policy: Replace ValueError with clean error for missing PhysX policy (newton-physics#1636) Co-authored-by: Viktor Reutskyy <33062116+vreutskyy@users.noreply.github.com> * Avoid unnecessary inflation of the contact reduction voxel aabb (newton-physics#1650) * Rename num_worlds to world_count (newton-physics#1634) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Support parsing autolimits from MJCF (newton-physics#1651) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Fix particle-shape restitution ignoring body velocity (newton-physics#1273) (newton-physics#1580) * Add overflow warnings for narrow-phase collision buffers (newton-physics#1643) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Documentation: add units to model/state docstrings (newton-physics#1649) * fix(viewer): add missing JointType.BALL support to contact line kernel (newton-physics#1640) * Make terrain mesh visual-only in anymal C walking example (newton-physics#1660) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Fix initialization of collider state in MPM finite difference mode (newton-physics#1652) * docs: document ModelBuilder.default_shape_cfg (newton-physics#1662) * Finalize the collision API (newton-physics#1581) * Remove hardcoded subnet ID from AWS workflow (newton-physics#1664) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Attempt to fix AWS config (newton-physics#1666) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Update AWS workflows to g7e.2xlarge with multi-AZ failover (newton-physics#1669) * fix(viewer-usd): disambiguate log_points colors for N=3 warp arrays (newton-physics#1661) * Viewer gl optimizations (newton-physics#1656) Signed-off-by: Miles Macklin <mmacklin@nvidia.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> Co-authored-by: Eric Heiden <eheiden@nvidia.com> * docs: add articulation workflow guidance and regression check (newton-physics#1663) * fix(examples): propagate IK solution to model state in Franka example (newton-physics#1637) * fix(deps,docs): bump nbconvert to 7.17.0 and fix ArticulationView doctest (newton-physics#1670) * Cleanup and improve some example (newton-physics#1625) Signed-off-by: adenzler-nvidia <adenzler@nvidia.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> * Handle zero-mass bodies and flip ensure_nonstatic_links default (newton-physics#1635) * Additional testing for ArticulationView (newton-physics#1527) Co-authored-by: Eric Heiden <eheiden@nvidia.com> * Update warp-lang nightly to 1.12.0.dev20260217 (newton-physics#1677) * Change default friction coefficients to match MuJoCo (newton-physics#1681) * Refactor mesh creation functions (newton-physics#1654) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Parse joint frictionloss from MJCF (newton-physics#1680) * Fix free joint body_pos and add ref/qpos0 support for MuJoCo solver (newton-physics#1645) * Fix root shapes in ArticulationView with fixed base (newton-physics#1639) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Use model collision methods and remove `create_collision_pipeline` from examples (newton-physics#1648) Co-authored-by: nvtw <110816143+nvtw@users.noreply.github.com> * Fix XPBD apply_joint_forces ignoring child joint transform (newton-physics#1582) * Adjust SDF API (newton-physics#1644) Co-authored-by: Eric Heiden <eheiden@nvidia.com> * Optimize test suite runtime (~18% faster) (newton-physics#1689) * Remove ensure_nonstatic_links option from importers (newton-physics#1682) Signed-off-by: adenzler-nvidia <adenzler@nvidia.com> * SolverMuJoCo: Add geom_margin support, align thickness default with MuJoCo and schemas (newton-physics#1653) * refactor: privatize non-public solver internals (newton-physics#1683) * Fix option parsing with multiple <option> elements from includes (newton-physics#1692) * Bump warp-lang nightly and newton-usd-schemas (newton-physics#1693) * Get rid of tkinter dependency (newton-physics#1676) * Fix SDF example contact buffer overflow (newton-physics#1695) * Fix implicit biastype for position/velocity actuator shortcuts (newton-physics#1678) * Fix include processor to respect meshdir/texturedir (newton-physics#1685) * Reduce cold-cache Warp compile time for geometry modules (newton-physics#1618) Co-authored-by: Cursor <cursoragent@cursor.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> * Fix xyzw-to-wxyz quaternion conversion in body inertia kernel (newton-physics#1694) * Rename key to label and add hierarchical labels (newton-physics#1592) (newton-physics#1632) * Expose geometry SDF helpers on public API (newton-physics#1684) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Improve custom frequency handling from USD, parse MuJoCo actuators and tendons (newton-physics#1510) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Collapse fixed joints with non articulated bodies (newton-physics#1608) * Fix renaming joint_key -> joint_label (newton-physics#1700) Signed-off-by: Eric Heiden <eheiden@nvidia.com> * Bump .python-version from 3.11 to 3.12 (newton-physics#1702) * Replace CITATION.md with CITATION.cff (newton-physics#1706) * Respect MJCF contype=conaffinity=0 via collision_group=0 (newton-physics#1703) * Make ViewerUSD reuse existing USD layers for the same output path (newton-physics#1704) Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Remove dead up-axis conversion from MuJoCo solver (newton-physics#1707) * Skip IK cube stacking example test (newton-physics#1713) * Fix global pairs (world=-1) not exported to MuJoCo spec (newton-physics#1705) * Reduce the memory consumption of hydroelastic contacts (newton-physics#1609) * Fix flakiness cube stacking (newton-physics#1714) * Fix collision shapes not toggleable in viewer UI (newton-physics#1715) * Fix softbody examples table layout in README (newton-physics#1716) * Standardize sensor APIs: label matching, keyword args, and update() method naming (newton-physics#1665) * Fix intermittent crash in parallel test runner from Manager proxy race (newton-physics#1721) * Clean up inertia.py function arguments to match Mesh.create_* API (newton-physics#1719) * Reduce default test runner verbosity (newton-physics#1723) * Add menagerie comparison tests for SolverMuJoCo (newton-physics#1720) Signed-off-by: Alain Denzler <adenzler@nvidia.com> Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> Co-authored-by: Viktor Reutskyy <vreutskyy@nvidia.com> Co-authored-by: Viktor Reutskyy <33062116+vreutskyy@users.noreply.github.com> * Add spatial tendon support for MuJoCo solver (newton-physics#1687) Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> * Expose qfrc_actuator from mujoco (newton-physics#1698) * Skip non-MODEL custom attributes in finalize validation (newton-physics#1734) * Resolve inheritrange for position actuators in MJCF parser (newton-physics#1727) * Support dampratio for position/velocity actuator shortcuts (newton-physics#1722) * Limit concurrency to 1 (newton-physics#1736) * Add a helper method for checking applied usd (newton-physics#1731) * Enhance playback URL handling in ViewerViser (newton-physics#1742) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Removed RenderShapeType (newton-physics#1748) * Override only MassAPI attributes that have been authored (newton-physics#1688) * Integration of newton-actuators (newton-physics#1342) Signed-off-by: jvonmuralt <jvonmuralt@nvidia.com> * Fix ArticulationView crash with fixed-joint-only articulations (newton-physics#1726) * Improve retrieval of Jupyter base URL in ViewerViser (newton-physics#1750) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Disable dynamics testing for UR5e and Apollo tests to avoid CI flakiness (newton-physics#1755) * Margin and Gap rename (newton-physics#1732) * Vbd Demos Fixing (newton-physics#1740) * Fix ViewerViser.log_lines method (newton-physics#1764) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Update warp-lang dependency to 1.12.0rc1 (newton-physics#1763) * Fix fromto capsule/cylinder orientation in MJCF parser (newton-physics#1741) * fix: multi-world particle BVH indexing (newton-physics#1641) Co-authored-by: Eric Heiden <eheiden@nvidia.com> * Clean up unused and internal-only kwargs in SolverMuJoCo (newton-physics#1766) * Parsing of the mimic joint and contact gap/margin from newton schemas (newton-physics#1690) Signed-off-by: Milad Rakhsha <mrakhsha@nvidia.com> * API Refactor v2 (newton-physics#1749) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Support explicit geom mass attributes in MJCF (newton-physics#1744) * Bump flask and werkzeug in lockfile for security (newton-physics#1769) Co-authored-by: Cursor <cursoragent@cursor.com> * Split MJCF worldbody root bodies into separate articulations (newton-physics#1754) * Expose VBD rigid contact forces for solver coupling (newton-physics#1745) Signed-off-by: JC <jumyungc@nvidia.com> * Add MJCF ellipsoid geom import and regression test (newton-physics#1772) Co-authored-by: Cursor <cursoragent@cursor.com> * Weld equality constraints parsed from mjcf are given Nan as the default value of torquescale. The correct default should be 1.0 (newton-physics#1760) * Improve picking accuracy and stability (newton-physics#1712) * Franka cloth demo improvement (newton-physics#1765) * Support computing sensing object transforms & API cleanup (newton-physics#1759) * Remove threading workaround (newton-physics#1751) * [Warp Raytrace] Consolidated ray intersect functions, renamed Options to Config (newton-physics#1767) * Improve README example gallery for PyPI compatibility (newton-physics#1776) * Fix issue with mesh in rerun viewer (newton-physics#1768) * Add PhysxMimicJointAPI parsing to USD importer (newton-physics#1735) * Move some math functions to Warp (newton-physics#1717) Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Add test to ensure MJCF xform argument is relative (newton-physics#1777) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Emit diaginertia instead of fullinertia for diagonal body inertia (newton-physics#1780) * Change default joint armature from 0.01 to 0 (newton-physics#1782) * Fix default kp/kv for position and velocity actuators (newton-physics#1786) * Lock body inertia after explicit MJCF <inertial> element (newton-physics#1784) * Fix for MJCF actuator custom attributes (newton-physics#1783) * Bump version to 0.2.3 Prepare the package metadata for the v0.2.3 release tag. * Fix ViewerRerun rendering of instances from hidden meshes (newton-physics#1788) * API cleanup (newton-physics#1789) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * BODY actuator target name bypasses body name de-duplication in SolverMuJoCo (newton-physics#1729) * Use default density for visual geoms in MJCF import (newton-physics#1781) * Fix GL viewer crash on Wayland (newton-physics#1793) * Make USD xform parameter control absolute articulation placement (newton-physics#1771) * Fix CUDA context corruption in SDF implementation (newton-physics#1792) * Bump mujoco-warp dependency to 3.5.0.2 (newton-physics#1779) * Fix MuJoCo margin/gap conversion (newton-physics#1785) * Bump version to 1.1.0.dev0 (newton-physics#1798) * Missing unittest.main added back to test_import_mjcf.py. Helps with F5 debugging in VS Code. (newton-physics#1796) * Improve H1 example (newton-physics#1801) Signed-off-by: Eric Heiden <eric-heiden@outlook.com> * Fix ViewerViser.set_camera() (newton-physics#1805) * Rename examples to follow prefix-first naming convention (newton-physics#1802) * Improve MuJoCo actuator domain randomization (newton-physics#1773) * Restore in_cup test in hydro example (newton-physics#1775) * Fix `newton.geometry` imports and change of Mesh maxhullverts global constant * Adapt to having both margin and gap arrays for each geom/shape * Fix for newton.geometry API changes in primitive/narrowphase.py * Fix removal of `BroadPhaseMode` IntEnum and revert to newton-sytle string literals * WIP: Adapt geometry/unified.py to fix breaking changes to `newton.geometry` API * First pass of API adjustments * Patch more gaps (with respect to margin and gap renaming) * GeoType.SDF was removed - reflect that in Kamino * Introduce CoM position offsets w.r.t body frame and operations to convert between body CoM state and generic local body-fixed reference frames. * Add caching of per-entity labels/names/keys in the Model subcontainers * Remove SDF shape wrapper since it's now internal to mesh handling in CD pipelines * Fix USD test assets * Add Newton <--> Kamino joint type conversion operations and per-space default limit constants * Add some cleanup to geometry and unified CD + UTs * Add Newton <--> Kamino shape type conversion operations * Apply new default joint coord limit constants to limits.py * Adapt foubrar model builder and USD asset to produce the same result in sim example * Purge "physical" goems and collapse all into a single group, and purge geometry "layers" * Disable allocation per-joint wrenches by default and make them optional * Make `Model` a dataclass * Separate ModelData* containers into own `core/data.py` module * Fix imports of ModelData * Rename `Model` as `ModelKamino` * Rename `ModelData` as `DataKamino` * Rename `State` as `StateKamino` * Rename `Control` as `ControlKamino` * Rename `Limits` as `LimitsKamino` * Rename `Contacts` as `ContactsKamino` * Rename `ModelBuilder` as `ModelBuilderKamino` * Make imports in test utilities relative * Revise CD meta-data attributes and their computation in GeometryModel and ModelBuilderKamino * Revise primitive CD pipeline * Revise unified CD pipeline * Revise CD front-end interfaces * Fix UTs and relevant utils for interface changes to CD * Change to `wp.DeviceLike` to account for upcoming deprecation of `Devicelike` * Depracate legacy HDF5 data io (will be replaced in the future) * Fix banned imports at module level * Modify USD importer to detect articulations and order geoms and joints similarly to how the Newton `parse_usd` function does. * Add conversion operation from `newton.Model` to `ModelKamino` * Add data, state and control container conversions * Add SolverKamino wrapper that fullfils newton integration interface * Add newton integration examples * Add SolverKamino to newton solver module imports * WIP: fix problem with lambda_j being allocated for only kinematic constraints and failing on array copying * Fix banned git import in benchmark * Rename *Settings to *Config (#213) * Rename SolverKaminoSettings -> SolverKaminoConfig * Rename DualProblemSettings -> DualProblemConfig * Rename CollisionDetectorSettings -> CollisionDetectorConfig * Rename PADMMSettings -> PADMMConfig * Rename ForwardKinematicsSolverSettings -> ForwardKinematicsSolverConfig * Rename SimulatorSettings -> SimulatorConfig * Add check for model compatibility in SolverKamino (#209) * Fix device assignment in sparse CG test on CPU (#216) * Replace Enum-type config attributes with Literal (#215) * Replace warmstart mode config param with literal * Replace contact warmstart mode config param with literal * Replace rotation correction config param with literal * Replace penalty update config param with literal * Replace FK preconditioner option config param with literal * Add post-init checks for dual/PADMM configs * Rename FKPreconditionerOptions to FKPreconditionerType * Remove WorldDescriptor from ModelKamino (#219) * Add geom index offset array to model info * Replace access to world description in model * Remove world descriptor from model * Fix computation of kinematics residual with sparse Jacobian (#220) * Migrates `ModelKaminoSize` to it's own module to avoid circular dependency between core/model.py and core/state.py and rename it as `SizeKamino`. * WIP: Fix SolverKamino wrapper * Fix circular dependency in conversions.py * Fix some broken unit tests and WIP to fix fourbar contact conversions and rendering * Make some conversions @staticmethods instead, because they dont need common class attributes * Fix declaration of custom state attributes and their conversion to/from newton and kamino * WIP: Debug model conversion and newton sim examples * Rename and cleanup start index array of per-world geoms * Model conversion and newton sim examples now work. * Make gravity conversion operation re-usable * Migrates boxes_fourbar builder using newton.ModelBuilder to it's own module to prepare for migration. * Use gravity conversion utility func in SolverKamino * Add reusable joint-parameterization conversion utility * Remove world-descriptor from model converter * Rename helper converter that handles entity-local transforms * Add some cleanup to DR Legs, ANYmal D and basic four-bar examples * Fix module-level imports of additional kamino-specific development dependencies * Fix module-level imports of additional kamino-specific development dependencies * Fix erroneous merge conflict. --------- Signed-off-by: Alain Denzler <adenzler@nvidia.com> Signed-off-by: Viktor Reutskyy <vreutskyy@nvidia.com> Signed-off-by: JC <jumyungc@nvidia.com> Signed-off-by: Milad Rakhsha <mrakhsha@nvidia.com> Signed-off-by: Milad-Rakhsha-NV <167464435+Milad-Rakhsha-NV@users.noreply.github.com> Signed-off-by: Eric Heiden <eric-heiden@outlook.com> Signed-off-by: Eric Heiden <eheiden@nvidia.com> Signed-off-by: Miles Macklin <mmacklin@nvidia.com> Signed-off-by: adenzler-nvidia <adenzler@nvidia.com> Signed-off-by: jvonmuralt <jvonmuralt@nvidia.com> Co-authored-by: Daniela Hase <116915287+daniela-hase@users.noreply.github.com> Co-authored-by: adenzler-nvidia <adenzler@nvidia.com> Co-authored-by: Viktor Reutskyy <33062116+vreutskyy@users.noreply.github.com> Co-authored-by: Eric Shi <97630937+shi-eric@users.noreply.github.com> Co-authored-by: Anka Chen <AnkaChan@users.noreply.github.com> Co-authored-by: Claude Sonnet 4.5 <noreply@anthropic.com> Co-authored-by: JC-nvidia <116605903+jumyungc@users.noreply.github.com> Co-authored-by: Kenny Vilella <kvilella@nvidia.com> Co-authored-by: nvtw <110816143+nvtw@users.noreply.github.com> Co-authored-by: Milad-Rakhsha-NV <167464435+Milad-Rakhsha-NV@users.noreply.github.com> Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com> Co-authored-by: Lennart Röstel <65088822+lenroe@users.noreply.github.com> Co-authored-by: Eric Heiden <eheiden@nvidia.com> Co-authored-by: jvonmuralt <jvonmuralt@nvidia.com> Co-authored-by: camevor <camevor@nvidia.com> Co-authored-by: mzamoramora-nvidia <mzamoramora@nvidia.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com> Co-authored-by: Alessandro Roncone <alecive87@gmail.com> Co-authored-by: gdaviet <57617656+gdaviet@users.noreply.github.com> Co-authored-by: Miles Macklin <mmacklin@nvidia.com> Co-authored-by: Gordon Yeoman <gyeomannvidia@users.noreply.github.com> Co-authored-by: Lukasz Wawrzyniak <lwawrzyniak@nvidia.com> Co-authored-by: Eric Heiden <eric-heiden@outlook.com> Co-authored-by: Cursor <cursoragent@cursor.com> Co-authored-by: Viktor Reutskyy <vreutskyy@nvidia.com> Co-authored-by: Lorenzo Terenzi <lorenzoterenzi96@gmail.com> Co-authored-by: smollerNV <164020096+smollerNV@users.noreply.github.com> Co-authored-by: twidmer <twidmer@nvidia.com> Co-authored-by: Christian Schumacher <christian.schumacher@disney.com> Co-authored-by: Guirec-Maloisel <25688871+Guirec-Maloisel@users.noreply.github.com>
This was referenced Mar 19, 2026
mmacklin
pushed a commit
to mmacklin/newton
that referenced
this pull request
Apr 7, 2026
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
2 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Set
num_stepsto 0 forTestMenagerie_UniversalRobotsUr5eandTestMenagerie_ApptronikApolloto avoid CI flakiness. The tests still verify model equivalence (structure and parameters) but skip the flaky dynamics simulation loop.With
num_steps=0, the simulation loopfor step in range(max_steps)never executes, so no dynamics steps or comparisons are performed. The model comparison (which happens before the loop) still runs to verify model structure equivalence.Old values are preserved as comments for easy restoration if needed.
Also adds typos allowlist entries for IIT, PN, PNDbotics, and Robotis to fix pre-existing false positives in the test file.
Summary by CodeRabbit