MODEL-X CROSSWALK BUTTON STATION
This push button station (PBS) is designed for use at a pedestrian crosswalk with in-pavement or overhead flashing yellow lights.
Note: Production of the Model-X has been discontinued. The iNX is the new, current production model and offers a significant upgrade to the Model-X.
Features
Synchronized LEDs
In-unit LEDs are synchronized to crosswalk sign, in-pavement, or overhead lights.
Accessible
High-reliability, full-featured push button with raised directional arrow.
Ambient sound adjustment
Features a locating tone and voice-on-location message, with ambient sound compensation.
Why upgrade to the iNX
The iNX is our latest and current model of AID, and represents a significant upgrade to the Model X. The iNX is ADA compliant and features Bluetooth connectivity for greater speed and range. It offers cities a fully integrated system with instructional sign, raised arrow push button, LED confirmation light, and modular speaker with front and rear sound.
Resources
| Name | Type |
| XAV2E-LED Push Button Station Installation Manual | Manual |
| Property | Value |
| Model XAV2E-LED Push Button Station | Cut Sheet |
| XAVCU2 Model X Control Board - 120 AC Powered | Cut Sheet |
XAV Control Unit
The XAVCU2 is a control unit that works in conjunction with Polara’s XAV2E-LED Push Button Stations, and provides a system for playing a voice message at a pedestrian crosswalk where flashing yellow lights are installed. The XAVCU2 control board is powered by a 120 VAC supply.
Part number: XAVCU2
Download the cutsheet
XAV DC Control Unit
The XAVCU2-DC is a control unit that works in conjunction with Polara’s XAV2E-LED Push Button Stations, and provides a system for playing a voice message at a pedestrian crosswalk where flashing yellow lights are installed. The XAVCU2-DC control board is powered by a 10 to 24 VDC supply, allowing this unit to be powered directly from a battery for solar powered applications.
Part number: XAVCU2-DC
Download the cutsheet
EZ Configurator
The EZ Configurator is a handheld infrared remote used for configuring a Navigator 2 Wire System or individual 2 and 4 Wire Navigator Push Button Stations (PBS). This grey colored model is backward compatible and works with N2 and N4 models.
Part number: ECONFIG
Download the cut sheet.
EZ Set Up Box for 4-Wire PBS
This Set Up Box is a tool for use in operating through all phases, one or two EN4-Wire Push Button Stations in a lab/bench top environment, without needing a Traffic Cabinet and PHCU4W.
Part number: EZ410
Download the cut sheet.
EZ Interconnect Board
The same Interconnect Board that is in CCU2ENHK.
Part number: PN 850-317
Cabinet Control Unit Hardware Kit
The CCU2ENHK includes the 50-pin connector/cable assembly, Interconnect Board, and installation instructions. The cable assembly has 8' long cables for cable #s 1, 2 and 4. Cable #3 which is for special functions and preemption is 4' long
Part number: CCU2ENHK
Cabinet Control Unit Hardware Kit - 12
Same as CCU2ENHK but all cables are 12' long to facilitate installation in a double width cabinet.
Part number: CCU2ENHK-12
12' Connector cable assembly
This is the same Connector/Cable Assembly that is in the CCU2ENHK-12.
Part number: PN 850-216
EZ 2 Wire Set Up Cable
This is a custom cable harness that works in conjunction with a CCU2EN to allow quick set up of EN2 push button stations in a shop environment, without the CCU2EN having to be connected to a Traffic Control Cabinet.
Part number: EZ220
Download the cut sheet.
EZ 4-wire 12" cable
This cable is used to connect a PHCU4W to an EN4 Push Button Station.
Part number: 850-288-12
EZ 4-wire 25" cable
This cable is used to connect a PHCU4W to an EN4 Push Button Station.
Part number: 850-288-25
No Arrow Button Diaphragm Assembly
Field-replaceable no-arrow button assembly. A typical application is a scramble intersection.
Part number: 850-279
R/L Arrow Button Diaphragm Assembly
Field-replaceable R/L-arrow button assembly.
Part number: 850-277
Bi-directional Arrow Button Diaphragm Assembly
Field-replaceable bidirectional-arrow button assembly.
Part number: 850-278
4" pole mounting adaptor
This adapter is used to mount two Navigator PBS on a 4” diameter pole so that two 9”x12” (or 9"x15") signs can be mounted without conflict. Set of two adapters with hardware is provided.
Part number: NPA4X2-X
Fluted pole mounting adaptor
This adapter is a modified version of one of the NPA4X2 adapters designed to clear the flutes on fluted poles so a Navigator PBS can be mounted directly on, or up to 20 degrees to either side of a scallop.
Part number: NPA-B-FP
Pole cap for 2.5" ID pole
This pole cap is designed to attach to an EN push button station and cover the top of a 2.5 inch stub pole.
Part number: ENWPC-X
Download the cut sheet.
Ped Station Color Change kit
This color change kit is a bundle of the required parts needed to change the Front Cover color on an EZComm Navigator EPBS.
Part number: EZ520-X; replace X with "B" for black, "G" for green and "Y" for yellow.
Download the cut sheet.
PBS Sound Baffle
This Sound Baffle is a small external plastic part used to re-direct the sound from the EZ Communicator resulting in an approximate 10dBA reduction in sound projection on side of the unit it is installed on.
Part number: ENAV-SB
Download the cut sheet.
Field Installable Speaker
This speaker is for replacing an ENavigator speaker in the field. Included is a gasket and 4 mounting screws.
Part number: 850-187
CCU-BRKT Mount
This mount is designed to hold a CCU2EN, iCCU-S or iCCU-S2 type control unit and bolt to a rack channel with EIA universal spacing.
Part number: CCU-BRKT
Download the cut sheet.
EZ USB Uploader
The EZ USB Uploader (Security Box) is a programming tool with dual USB ports, for use with any EZ Communicator product to easily update product software, audio sounds, or configuration.
Part number: EZ510
Download the cut sheet.
Bottom Cover with Conduit Fitting
This cover is to facilitate connecting flexible conduit to an EZ Communicator Navigator Push Button Station (EPBS) when mounted onto a wood pole or solid surface where the wiring cannot be routed through the regular wire routing hole on the back of the Navigator.
Part number: EZ521-X
Download the cut sheet.
EZ Navigator Pole Extender
The EZ Navigator Pole Extender facilitates mounting a Push Button Station (EPBS) 6” or 12” away from the traffic pole, in order to position the EPBS closer to the start of the crosswalk. Standard sizes are 6" and 12" extensions from the pole. Made of welded steel with hot dip galvanized finish.
Part numbers: EZ523-06 & EZ523-12
Download the cut sheet.
9x12 Push Button Sign Backplate
This sign back plate is designed to be attached to any iNavigator PBS or any Push Button Frame, for mounting a 9”x12” crosswalk sign.
Part number: PBFA9X12-X; replace X with "B" for black, "G" for green and "Y" for yellow.
Download the cut sheet.
9x15 Push Button Sign Backplate
This sign back plate is designed to be attached to any iNavigator PBS or any Push Button Frame, for mounting a 9”x15” crosswalk sign.
Part number: PBFA9X15-X; replace X with "B" for black, "G" for green and "Y" for yellow.
Download the cut sheet.
External Speaker for ES Option
This is an external horn style speaker that typically installs on a PED Head for audible APS beaconing at long or skewed crossings.
Part number: 2WEXTSPKR
Matching Color Paint
Cans of spray paint in the colors that match Polara's black, green and yellow powder coat colors.
Part numbers: 190-1054 for black, 190-1055 for green, and 190-1056 for yellow.
| Model-X | |
|---|---|
| Property | Value |
| Use of BDL3 or BDSP-014 Buttons with XAV2 Systems | Technical Bulletin |
| Name | Type |
| XAV2E-LED Push Button Station Installation Manual | Manual |
| Property | Value |
| Model XAV2E-LED Push Button Station | Cut Sheet |
| XAVCU2 Model X Control Board - 120 AC Powered | Cut Sheet |
XAV Control Unit
The XAVCU2 is a control unit that works in conjunction with Polara’s XAV2E-LED Push Button Stations, and provides a system for playing a voice message at a pedestrian crosswalk where flashing yellow lights are installed. The XAVCU2 control board is powered by a 120 VAC supply.
Part number: XAVCU2
Download the cutsheet
XAV DC Control Unit
The XAVCU2-DC is a control unit that works in conjunction with Polara’s XAV2E-LED Push Button Stations, and provides a system for playing a voice message at a pedestrian crosswalk where flashing yellow lights are installed. The XAVCU2-DC control board is powered by a 10 to 24 VDC supply, allowing this unit to be powered directly from a battery for solar powered applications.
Part number: XAVCU2-DC
Download the cutsheet
EZ Configurator
The EZ Configurator is a handheld infrared remote used for configuring a Navigator 2 Wire System or individual 2 and 4 Wire Navigator Push Button Stations (PBS). This grey colored model is backward compatible and works with N2 and N4 models.
Part number: ECONFIG
Download the cut sheet.
EZ Set Up Box for 4-Wire PBS
This Set Up Box is a tool for use in operating through all phases, one or two EN4-Wire Push Button Stations in a lab/bench top environment, without needing a Traffic Cabinet and PHCU4W.
Part number: EZ410
Download the cut sheet.
EZ Interconnect Board
The same Interconnect Board that is in CCU2ENHK.
Part number: PN 850-317
Cabinet Control Unit Hardware Kit
The CCU2ENHK includes the 50-pin connector/cable assembly, Interconnect Board, and installation instructions. The cable assembly has 8' long cables for cable #s 1, 2 and 4. Cable #3 which is for special functions and preemption is 4' long
Part number: CCU2ENHK
Cabinet Control Unit Hardware Kit - 12
Same as CCU2ENHK but all cables are 12' long to facilitate installation in a double width cabinet.
Part number: CCU2ENHK-12
12' Connector cable assembly
This is the same Connector/Cable Assembly that is in the CCU2ENHK-12.
Part number: PN 850-216
EZ 2 Wire Set Up Cable
This is a custom cable harness that works in conjunction with a CCU2EN to allow quick set up of EN2 push button stations in a shop environment, without the CCU2EN having to be connected to a Traffic Control Cabinet.
Part number: EZ220
Download the cut sheet.
EZ 4-wire 12" cable
This cable is used to connect a PHCU4W to an EN4 Push Button Station.
Part number: 850-288-12
EZ 4-wire 25" cable
This cable is used to connect a PHCU4W to an EN4 Push Button Station.
Part number: 850-288-25
No Arrow Button Diaphragm Assembly
Field-replaceable no-arrow button assembly. A typical application is a scramble intersection.
Part number: 850-279
R/L Arrow Button Diaphragm Assembly
Field-replaceable R/L-arrow button assembly.
Part number: 850-277
Bi-directional Arrow Button Diaphragm Assembly
Field-replaceable bidirectional-arrow button assembly.
Part number: 850-278
4" pole mounting adaptor
This adapter is used to mount two Navigator PBS on a 4” diameter pole so that two 9”x12” (or 9"x15") signs can be mounted without conflict. Set of two adapters with hardware is provided.
Part number: NPA4X2-X
Fluted pole mounting adaptor
This adapter is a modified version of one of the NPA4X2 adapters designed to clear the flutes on fluted poles so a Navigator PBS can be mounted directly on, or up to 20 degrees to either side of a scallop.
Part number: NPA-B-FP
Pole cap for 2.5" ID pole
This pole cap is designed to attach to an EN push button station and cover the top of a 2.5 inch stub pole.
Part number: ENWPC-X
Download the cut sheet.
Ped Station Color Change kit
This color change kit is a bundle of the required parts needed to change the Front Cover color on an EZComm Navigator EPBS.
Part number: EZ520-X; replace X with "B" for black, "G" for green and "Y" for yellow.
Download the cut sheet.
PBS Sound Baffle
This Sound Baffle is a small external plastic part used to re-direct the sound from the EZ Communicator resulting in an approximate 10dBA reduction in sound projection on side of the unit it is installed on.
Part number: ENAV-SB
Download the cut sheet.
Field Installable Speaker
This speaker is for replacing an ENavigator speaker in the field. Included is a gasket and 4 mounting screws.
Part number: 850-187
CCU-BRKT Mount
This mount is designed to hold a CCU2EN, iCCU-S or iCCU-S2 type control unit and bolt to a rack channel with EIA universal spacing.
Part number: CCU-BRKT
Download the cut sheet.
EZ USB Uploader
The EZ USB Uploader (Security Box) is a programming tool with dual USB ports, for use with any EZ Communicator product to easily update product software, audio sounds, or configuration.
Part number: EZ510
Download the cut sheet.
Bottom Cover with Conduit Fitting
This cover is to facilitate connecting flexible conduit to an EZ Communicator Navigator Push Button Station (EPBS) when mounted onto a wood pole or solid surface where the wiring cannot be routed through the regular wire routing hole on the back of the Navigator.
Part number: EZ521-X
Download the cut sheet.
EZ Navigator Pole Extender
The EZ Navigator Pole Extender facilitates mounting a Push Button Station (EPBS) 6” or 12” away from the traffic pole, in order to position the EPBS closer to the start of the crosswalk. Standard sizes are 6" and 12" extensions from the pole. Made of welded steel with hot dip galvanized finish.
Part numbers: EZ523-06 & EZ523-12
Download the cut sheet.
9x12 Push Button Sign Backplate
This sign back plate is designed to be attached to any iNavigator PBS or any Push Button Frame, for mounting a 9”x12” crosswalk sign.
Part number: PBFA9X12-X; replace X with "B" for black, "G" for green and "Y" for yellow.
Download the cut sheet.
9x15 Push Button Sign Backplate
This sign back plate is designed to be attached to any iNavigator PBS or any Push Button Frame, for mounting a 9”x15” crosswalk sign.
Part number: PBFA9X15-X; replace X with "B" for black, "G" for green and "Y" for yellow.
Download the cut sheet.
External Speaker for ES Option
This is an external horn style speaker that typically installs on a PED Head for audible APS beaconing at long or skewed crossings.
Part number: 2WEXTSPKR
Matching Color Paint
Cans of spray paint in the colors that match Polara's black, green and yellow powder coat colors.
Part numbers: 190-1054 for black, 190-1055 for green, and 190-1056 for yellow.
| Model-X | |
|---|---|
| Property | Value |
| Use of BDL3 or BDSP-014 Buttons with XAV2 Systems | Technical Bulletin |