chore: adaptations for leanprover/lean4#2778#8284
Closed
kim-em wants to merge 12 commits intonightly-testing-2023-11-08from
Closed
chore: adaptations for leanprover/lean4#2778#8284kim-em wants to merge 12 commits intonightly-testing-2023-11-08from
kim-em wants to merge 12 commits intonightly-testing-2023-11-08from
Conversation
This was referenced Nov 9, 2023
When reading this file, it is difficult to tell whether statements are about ordinal or natural powers; especially given that when leanprover/lean4#2220 is fixed the meanings may change. This adds type annotations to remove the ambiguity.
This folds in the changes from #8291
9af36fb to
1e28cf3
Compare
Member
|
The commits above cherry-pick the changes from #8291 onto I did not directly merge #8291 as I did not want to pull in other changes from master and mess up Scott's automation setup. |
mathlib-bors bot
pushed a commit
that referenced
this pull request
Nov 17, 2023
# PR contents This is the supremum of - #8284 - #8056 - #8023 - #8332 - #8226 (already approved) - #7834 (already approved) along with some minor fixes from failures on nightly-testing as Mathlib `master` is merged into it. Note that some PRs for changes that are already compatible with the current toolchain and will be necessary have already been split out: #8380. I am hopeful that in future we will be able to progressively merge adaptation PRs into a `bump/v4.X.0` branch, so we never end up with a "big merge" like this. However one of these adaptation PRs (#8056) predates my new scheme for combined CI, and it wasn't possible to keep that PR viable in the meantime. # Lean PRs involved in this bump In particular this includes adjustments for the Lean PRs * leanprover/lean4#2778 * leanprover/lean4#2790 * leanprover/lean4#2783 * leanprover/lean4#2825 * leanprover/lean4#2722 ## leanprover/lean4#2778 We can get rid of all the ``` local macro_rules | `($x ^ $y) => `(HPow.hPow $x $y) -- Porting note: See issue lean4#2220 ``` macros across Mathlib (and in any projects that want to write natural number powers of reals). ## leanprover/lean4#2722 Changes the default behaviour of `simp` to `(config := {decide := false})`. This makes `simp` (and consequentially `norm_num`) less powerful, but also more consistent, and less likely to blow up in long failures. This requires a variety of changes: changing some previously by `simp` or `norm_num` to `decide` or `rfl`, or adding `(config := {decide := true})`. ## leanprover/lean4#2783 This changed the behaviour of `simp` so that `simp [f]` will only unfold "fully applied" occurrences of `f`. The old behaviour can be recovered with `simp (config := { unfoldPartialApp := true })`. We may in future add a syntax for this, e.g. `simp [!f]`; please provide feedback! In the meantime, we have made the following changes: * switching to using explicit lemmas that have the intended level of application * `(config := { unfoldPartialApp := true })` in some places, to recover the old behaviour * Using `@[eqns]` to manually adjust the equation lemmas for a particular definition, recovering the old behaviour just for that definition. See #8371, where we do this for `Function.comp` and `Function.flip`. This change in Lean may require further changes down the line (e.g. adding the `!f` syntax, and/or upstreaming the special treatment for `Function.comp` and `Function.flip`, and/or removing this special treatment). Please keep an open and skeptical mind about these changes! Co-authored-by: leanprover-community-mathlib4-bot <leanprover-community-mathlib4-bot@users.noreply.github.com> Co-authored-by: Scott Morrison <scott.morrison@gmail.com> Co-authored-by: Eric Wieser <wieser.eric@gmail.com> Co-authored-by: Mauricio Collares <mauricio@collares.org>
mathlib-bors bot
pushed a commit
that referenced
this pull request
Nov 17, 2023
# PR contents This is the supremum of - #8284 - #8056 - #8023 - #8332 - #8226 (already approved) - #7834 (already approved) along with some minor fixes from failures on nightly-testing as Mathlib `master` is merged into it. Note that some PRs for changes that are already compatible with the current toolchain and will be necessary have already been split out: #8380. I am hopeful that in future we will be able to progressively merge adaptation PRs into a `bump/v4.X.0` branch, so we never end up with a "big merge" like this. However one of these adaptation PRs (#8056) predates my new scheme for combined CI, and it wasn't possible to keep that PR viable in the meantime. # Lean PRs involved in this bump In particular this includes adjustments for the Lean PRs * leanprover/lean4#2778 * leanprover/lean4#2790 * leanprover/lean4#2783 * leanprover/lean4#2825 * leanprover/lean4#2722 ## leanprover/lean4#2778 We can get rid of all the ``` local macro_rules | `($x ^ $y) => `(HPow.hPow $x $y) -- Porting note: See issue lean4#2220 ``` macros across Mathlib (and in any projects that want to write natural number powers of reals). ## leanprover/lean4#2722 Changes the default behaviour of `simp` to `(config := {decide := false})`. This makes `simp` (and consequentially `norm_num`) less powerful, but also more consistent, and less likely to blow up in long failures. This requires a variety of changes: changing some previously by `simp` or `norm_num` to `decide` or `rfl`, or adding `(config := {decide := true})`. ## leanprover/lean4#2783 This changed the behaviour of `simp` so that `simp [f]` will only unfold "fully applied" occurrences of `f`. The old behaviour can be recovered with `simp (config := { unfoldPartialApp := true })`. We may in future add a syntax for this, e.g. `simp [!f]`; please provide feedback! In the meantime, we have made the following changes: * switching to using explicit lemmas that have the intended level of application * `(config := { unfoldPartialApp := true })` in some places, to recover the old behaviour * Using `@[eqns]` to manually adjust the equation lemmas for a particular definition, recovering the old behaviour just for that definition. See #8371, where we do this for `Function.comp` and `Function.flip`. This change in Lean may require further changes down the line (e.g. adding the `!f` syntax, and/or upstreaming the special treatment for `Function.comp` and `Function.flip`, and/or removing this special treatment). Please keep an open and skeptical mind about these changes! Co-authored-by: leanprover-community-mathlib4-bot <leanprover-community-mathlib4-bot@users.noreply.github.com> Co-authored-by: Scott Morrison <scott.morrison@gmail.com> Co-authored-by: Eric Wieser <wieser.eric@gmail.com> Co-authored-by: Mauricio Collares <mauricio@collares.org>
alexkeizer
pushed a commit
that referenced
this pull request
Nov 17, 2023
# PR contents This is the supremum of - #8284 - #8056 - #8023 - #8332 - #8226 (already approved) - #7834 (already approved) along with some minor fixes from failures on nightly-testing as Mathlib `master` is merged into it. Note that some PRs for changes that are already compatible with the current toolchain and will be necessary have already been split out: #8380. I am hopeful that in future we will be able to progressively merge adaptation PRs into a `bump/v4.X.0` branch, so we never end up with a "big merge" like this. However one of these adaptation PRs (#8056) predates my new scheme for combined CI, and it wasn't possible to keep that PR viable in the meantime. # Lean PRs involved in this bump In particular this includes adjustments for the Lean PRs * leanprover/lean4#2778 * leanprover/lean4#2790 * leanprover/lean4#2783 * leanprover/lean4#2825 * leanprover/lean4#2722 ## leanprover/lean4#2778 We can get rid of all the ``` local macro_rules | `($x ^ $y) => `(HPow.hPow $x $y) -- Porting note: See issue lean4#2220 ``` macros across Mathlib (and in any projects that want to write natural number powers of reals). ## leanprover/lean4#2722 Changes the default behaviour of `simp` to `(config := {decide := false})`. This makes `simp` (and consequentially `norm_num`) less powerful, but also more consistent, and less likely to blow up in long failures. This requires a variety of changes: changing some previously by `simp` or `norm_num` to `decide` or `rfl`, or adding `(config := {decide := true})`. ## leanprover/lean4#2783 This changed the behaviour of `simp` so that `simp [f]` will only unfold "fully applied" occurrences of `f`. The old behaviour can be recovered with `simp (config := { unfoldPartialApp := true })`. We may in future add a syntax for this, e.g. `simp [!f]`; please provide feedback! In the meantime, we have made the following changes: * switching to using explicit lemmas that have the intended level of application * `(config := { unfoldPartialApp := true })` in some places, to recover the old behaviour * Using `@[eqns]` to manually adjust the equation lemmas for a particular definition, recovering the old behaviour just for that definition. See #8371, where we do this for `Function.comp` and `Function.flip`. This change in Lean may require further changes down the line (e.g. adding the `!f` syntax, and/or upstreaming the special treatment for `Function.comp` and `Function.flip`, and/or removing this special treatment). Please keep an open and skeptical mind about these changes! Co-authored-by: leanprover-community-mathlib4-bot <leanprover-community-mathlib4-bot@users.noreply.github.com> Co-authored-by: Scott Morrison <scott.morrison@gmail.com> Co-authored-by: Eric Wieser <wieser.eric@gmail.com> Co-authored-by: Mauricio Collares <mauricio@collares.org>
Contributor
|
This was merged in the version bump, so closing. |
alexkeizer
pushed a commit
that referenced
this pull request
Nov 21, 2023
This is the supremum of - #8284 - #8056 - #8023 - #8332 - #8226 (already approved) - #7834 (already approved) along with some minor fixes from failures on nightly-testing as Mathlib `master` is merged into it. Note that some PRs for changes that are already compatible with the current toolchain and will be necessary have already been split out: #8380. I am hopeful that in future we will be able to progressively merge adaptation PRs into a `bump/v4.X.0` branch, so we never end up with a "big merge" like this. However one of these adaptation PRs (#8056) predates my new scheme for combined CI, and it wasn't possible to keep that PR viable in the meantime. In particular this includes adjustments for the Lean PRs * leanprover/lean4#2778 * leanprover/lean4#2790 * leanprover/lean4#2783 * leanprover/lean4#2825 * leanprover/lean4#2722 We can get rid of all the ``` local macro_rules | `($x ^ $y) => `(HPow.hPow $x $y) -- Porting note: See issue lean4#2220 ``` macros across Mathlib (and in any projects that want to write natural number powers of reals). Changes the default behaviour of `simp` to `(config := {decide := false})`. This makes `simp` (and consequentially `norm_num`) less powerful, but also more consistent, and less likely to blow up in long failures. This requires a variety of changes: changing some previously by `simp` or `norm_num` to `decide` or `rfl`, or adding `(config := {decide := true})`. This changed the behaviour of `simp` so that `simp [f]` will only unfold "fully applied" occurrences of `f`. The old behaviour can be recovered with `simp (config := { unfoldPartialApp := true })`. We may in future add a syntax for this, e.g. `simp [!f]`; please provide feedback! In the meantime, we have made the following changes: * switching to using explicit lemmas that have the intended level of application * `(config := { unfoldPartialApp := true })` in some places, to recover the old behaviour * Using `@[eqns]` to manually adjust the equation lemmas for a particular definition, recovering the old behaviour just for that definition. See #8371, where we do this for `Function.comp` and `Function.flip`. This change in Lean may require further changes down the line (e.g. adding the `!f` syntax, and/or upstreaming the special treatment for `Function.comp` and `Function.flip`, and/or removing this special treatment). Please keep an open and skeptical mind about these changes! Co-authored-by: leanprover-community-mathlib4-bot <leanprover-community-mathlib4-bot@users.noreply.github.com> Co-authored-by: Scott Morrison <scott.morrison@gmail.com> Co-authored-by: Eric Wieser <wieser.eric@gmail.com> Co-authored-by: Mauricio Collares <mauricio@collares.org>
grunweg
pushed a commit
that referenced
this pull request
Dec 15, 2023
# PR contents This is the supremum of - #8284 - #8056 - #8023 - #8332 - #8226 (already approved) - #7834 (already approved) along with some minor fixes from failures on nightly-testing as Mathlib `master` is merged into it. Note that some PRs for changes that are already compatible with the current toolchain and will be necessary have already been split out: #8380. I am hopeful that in future we will be able to progressively merge adaptation PRs into a `bump/v4.X.0` branch, so we never end up with a "big merge" like this. However one of these adaptation PRs (#8056) predates my new scheme for combined CI, and it wasn't possible to keep that PR viable in the meantime. # Lean PRs involved in this bump In particular this includes adjustments for the Lean PRs * leanprover/lean4#2778 * leanprover/lean4#2790 * leanprover/lean4#2783 * leanprover/lean4#2825 * leanprover/lean4#2722 ## leanprover/lean4#2778 We can get rid of all the ``` local macro_rules | `($x ^ $y) => `(HPow.hPow $x $y) -- Porting note: See issue lean4#2220 ``` macros across Mathlib (and in any projects that want to write natural number powers of reals). ## leanprover/lean4#2722 Changes the default behaviour of `simp` to `(config := {decide := false})`. This makes `simp` (and consequentially `norm_num`) less powerful, but also more consistent, and less likely to blow up in long failures. This requires a variety of changes: changing some previously by `simp` or `norm_num` to `decide` or `rfl`, or adding `(config := {decide := true})`. ## leanprover/lean4#2783 This changed the behaviour of `simp` so that `simp [f]` will only unfold "fully applied" occurrences of `f`. The old behaviour can be recovered with `simp (config := { unfoldPartialApp := true })`. We may in future add a syntax for this, e.g. `simp [!f]`; please provide feedback! In the meantime, we have made the following changes: * switching to using explicit lemmas that have the intended level of application * `(config := { unfoldPartialApp := true })` in some places, to recover the old behaviour * Using `@[eqns]` to manually adjust the equation lemmas for a particular definition, recovering the old behaviour just for that definition. See #8371, where we do this for `Function.comp` and `Function.flip`. This change in Lean may require further changes down the line (e.g. adding the `!f` syntax, and/or upstreaming the special treatment for `Function.comp` and `Function.flip`, and/or removing this special treatment). Please keep an open and skeptical mind about these changes! Co-authored-by: leanprover-community-mathlib4-bot <leanprover-community-mathlib4-bot@users.noreply.github.com> Co-authored-by: Scott Morrison <scott.morrison@gmail.com> Co-authored-by: Eric Wieser <wieser.eric@gmail.com> Co-authored-by: Mauricio Collares <mauricio@collares.org>
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
3 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Change required for leanprover/lean4#2778. This PR is based off
nightly-testing-2023-11-08.