bpf: permit map_ptr arithmetic with opcode add and offset 0#9
Closed
kernel-patches-bot wants to merge 3 commits intobpf-nextfrom
Closed
bpf: permit map_ptr arithmetic with opcode add and offset 0#9kernel-patches-bot wants to merge 3 commits intobpf-nextfrom
kernel-patches-bot wants to merge 3 commits intobpf-nextfrom
Conversation
Author
|
Master branch: 95cec14 patch https://patchwork.ozlabs.org/project/netdev/patch/20200904194900.3031377-1-yhs@fb.com/ applied successfully |
to bpf map fields") added support to access map fields
with CORE support. For example,
struct bpf_map {
__u32 max_entries;
} __attribute__((preserve_access_index));
struct bpf_array {
struct bpf_map map;
__u32 elem_size;
} __attribute__((preserve_access_index));
struct {
__uint(type, BPF_MAP_TYPE_ARRAY);
__uint(max_entries, 4);
__type(key, __u32);
__type(value, __u32);
} m_array SEC(".maps");
SEC("cgroup_skb/egress")
int cg_skb(void *ctx)
{
struct bpf_array *array = (struct bpf_array *)&m_array;
/* .. array->map.max_entries .. */
}
In kernel, bpf_htab has similar structure,
struct bpf_htab {
struct bpf_map map;
...
}
In the above cg_skb(), to access array->map.max_entries, with CORE, the clang will
generate two builtin's.
base = &m_array;
/* access array.map */
map_addr = __builtin_preserve_struct_access_info(base, 0, 0);
/* access array.map.max_entries */
max_entries_addr = __builtin_preserve_struct_access_info(map_addr, 0, 0);
max_entries = *max_entries_addr;
In the current llvm, if two builtin's are in the same function or
in the same function after inlining, the compiler is smart enough to chain
them together and generates like below:
base = &m_array;
max_entries = *(base + reloc_offset); /* reloc_offset = 0 in this case */
and we are fine.
But if we force no inlining for one of functions in test_map_ptr() selftest, e.g.,
check_default(), the above two __builtin_preserve_* will be in two different
functions. In this case, we will have code like:
func check_hash():
reloc_offset_map = 0;
base = &m_array;
map_base = base + reloc_offset_map;
check_default(map_base, ...)
func check_default(map_base, ...):
max_entries = *(map_base + reloc_offset_max_entries);
In kernel, map_ptr (CONST_PTR_TO_MAP) does not allow any arithmetic.
The above "map_base = base + reloc_offset_map" will trigger a verifier failure.
; VERIFY(check_default(&hash->map, map));
0: (18) r7 = 0xffffb4fe8018a004
2: (b4) w1 = 110
3: (63) *(u32 *)(r7 +0) = r1
R1_w=invP110 R7_w=map_value(id=0,off=4,ks=4,vs=8,imm=0) R10=fp0
; VERIFY_TYPE(BPF_MAP_TYPE_HASH, check_hash);
4: (18) r1 = 0xffffb4fe8018a000
6: (b4) w2 = 1
7: (63) *(u32 *)(r1 +0) = r2
R1_w=map_value(id=0,off=0,ks=4,vs=8,imm=0) R2_w=invP1 R7_w=map_value(id=0,off=4,ks=4,vs=8,imm=0) R10=fp0
8: (b7) r2 = 0
9: (18) r8 = 0xffff90bcb500c000
11: (18) r1 = 0xffff90bcb500c000
13: (0f) r1 += r2
R1 pointer arithmetic on map_ptr prohibited
To fix the issue, let us permit map_ptr + 0 arithmetic which will
result in exactly the same map_ptr.
Signed-off-by: Yonghong Song <yhs@fb.com>
---
kernel/bpf/verifier.c | 3 +++
1 file changed, 3 insertions(+)
verifier change. Also added to verifier test for both "map_ptr += scalar" and "scalar += map_ptr" arithmetic. Signed-off-by: Yonghong Song <yhs@fb.com> --- .../selftests/bpf/progs/map_ptr_kern.c | 4 +-- .../testing/selftests/bpf/verifier/map_ptr.c | 32 +++++++++++++++++++ 2 files changed, 34 insertions(+), 2 deletions(-)
Author
|
Master branch: f9bec5d patch https://patchwork.ozlabs.org/project/netdev/patch/20200904194900.3031377-1-yhs@fb.com/ applied successfully |
Author
|
At least one diff in series https://patchwork.ozlabs.org/project/netdev/list/?series=199627 expired. Closing PR. |
kernel-patches-bot
pushed a commit
that referenced
this pull request
Sep 16, 2020
The recent commit 01eb018 ("powerpc/64s: Fix restore_math unnecessarily changing MSR") changed some of the handling of floating point/vector restore. In particular it caused current->thread.fpexc_mode to be copied into the current MSR (via msr_check_and_set()), rather than just into regs->msr (which is moved into MSR on return to userspace). This can lead to a crash in the kernel if we take a floating point exception when restoring FPSCR: Oops: Exception in kernel mode, sig: 8 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: CPU: 3 PID: 101213 Comm: ld64.so.2 Not tainted 5.9.0-rc1-00098-g18445bf405cb-dirty #9 NIP: c00000000000fbb4 LR: c00000000001a7ac CTR: c000000000183570 REGS: c0000016b7cfb3b0 TRAP: 0700 Not tainted (5.9.0-rc1-00098-g18445bf405cb-dirty) MSR: 900000000290b933 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 44002444 XER: 00000000 CFAR: c00000000001a7a8 IRQMASK: 1 GPR00: c00000000001ae40 c0000016b7cfb640 c0000000011b7f00 c000001542a0f740 GPR04: c000001542a0f720 c000001542a0eb00 0000000000000900 c000001542a0eb00 GPR08: 000000000000000a 0000000000002000 9000000000009033 0000000000000000 GPR12: 0000000000004000 c0000017ffffd900 0000000000000001 c000000000df5a58 GPR16: c000000000e19c18 c0000000010e1123 0000000000000001 c000000000e1a638 GPR20: 0000000000000000 c0000000044b1d00 0000000000000000 c000001542a0f2a0 GPR24: 00000016c7fe0000 c000001542a0f720 c000000001c93da0 c000000000fe5f28 GPR28: c000001542a0f720 0000000000800000 c0000016b7cfbe90 0000000002802900 NIP load_fp_state+0x4/0x214 LR restore_math+0x17c/0x1f0 Call Trace: 0xc0000016b7cfb680 (unreliable) __switch_to+0x330/0x460 __schedule+0x318/0x920 schedule+0x74/0x140 schedule_timeout+0x318/0x3f0 wait_for_completion+0xc8/0x210 call_usermodehelper_exec+0x234/0x280 do_coredump+0xedc/0x13c0 get_signal+0x1d4/0xbe0 do_notify_resume+0x1a0/0x490 interrupt_exit_user_prepare+0x1c4/0x230 interrupt_return+0x14/0x1c0 Instruction dump: ebe10168 e88101a0 7c8ff120 382101e0 e8010010 7c0803a6 4e800020 790605c4 782905c4 7c0008a8 7c0008a8 c8030200 <fffe058e> 48000088 c8030000 c8230010 Fix it by only loading the fpexc_mode value into regs->msr. Also add a comment to explain that although VSX is subject to the value of fpexc_mode, we don't have to handle that separately because we only allow VSX to be enabled if FP is also enabled. Fixes: 01eb018 ("powerpc/64s: Fix restore_math unnecessarily changing MSR") Reported-by: Milton Miller <miltonm@us.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Link: https://lore.kernel.org/r/20200825093424.3967813-1-mpe@ellerman.id.au
kernel-patches-bot
pushed a commit
that referenced
this pull request
Sep 16, 2020
…s metrics" test Linux 5.9 introduced perf test case "Parse and process metrics" and on s390 this test case always dumps core: [root@t35lp67 perf]# ./perf test -vvvv -F 67 67: Parse and process metrics : --- start --- metric expr inst_retired.any / cpu_clk_unhalted.thread for IPC parsing metric: inst_retired.any / cpu_clk_unhalted.thread Segmentation fault (core dumped) [root@t35lp67 perf]# I debugged this core dump and gdb shows this call chain: (gdb) where #0 0x000003ffabc3192a in __strnlen_c_1 () from /lib64/libc.so.6 #1 0x000003ffabc293de in strcasestr () from /lib64/libc.so.6 #2 0x0000000001102ba2 in match_metric(list=0x1e6ea20 "inst_retired.any", n=<optimized out>) at util/metricgroup.c:368 #3 find_metric (map=<optimized out>, map=<optimized out>, metric=0x1e6ea20 "inst_retired.any") at util/metricgroup.c:765 #4 __resolve_metric (ids=0x0, map=<optimized out>, metric_list=0x0, metric_no_group=<optimized out>, m=<optimized out>) at util/metricgroup.c:844 #5 resolve_metric (ids=0x0, map=0x0, metric_list=0x0, metric_no_group=<optimized out>) at util/metricgroup.c:881 #6 metricgroup__add_metric (metric=<optimized out>, metric_no_group=metric_no_group@entry=false, events=<optimized out>, events@entry=0x3ffd84fb878, metric_list=0x0, metric_list@entry=0x3ffd84fb868, map=0x0) at util/metricgroup.c:943 #7 0x00000000011034ae in metricgroup__add_metric_list (map=0x13f9828 <map>, metric_list=0x3ffd84fb868, events=0x3ffd84fb878, metric_no_group=<optimized out>, list=<optimized out>) at util/metricgroup.c:988 #8 parse_groups (perf_evlist=perf_evlist@entry=0x1e70260, str=str@entry=0x12f34b2 "IPC", metric_no_group=<optimized out>, metric_no_merge=<optimized out>, fake_pmu=fake_pmu@entry=0x1462f18 <perf_pmu.fake>, metric_events=0x3ffd84fba58, map=0x1) at util/metricgroup.c:1040 #9 0x0000000001103eb2 in metricgroup__parse_groups_test( evlist=evlist@entry=0x1e70260, map=map@entry=0x13f9828 <map>, str=str@entry=0x12f34b2 "IPC", metric_no_group=metric_no_group@entry=false, metric_no_merge=metric_no_merge@entry=false, metric_events=0x3ffd84fba58) at util/metricgroup.c:1082 #10 0x00000000010c84d8 in __compute_metric (ratio2=0x0, name2=0x0, ratio1=<synthetic pointer>, name1=0x12f34b2 "IPC", vals=0x3ffd84fbad8, name=0x12f34b2 "IPC") at tests/parse-metric.c:159 #11 compute_metric (ratio=<synthetic pointer>, vals=0x3ffd84fbad8, name=0x12f34b2 "IPC") at tests/parse-metric.c:189 #12 test_ipc () at tests/parse-metric.c:208 ..... ..... omitted many more lines This test case was added with commit 218ca91 ("perf tests: Add parse metric test for frontend metric"). When I compile with make DEBUG=y it works fine and I do not get a core dump. It turned out that the above listed function call chain worked on a struct pmu_event array which requires a trailing element with zeroes which was missing. The marco map_for_each_event() loops over that array tests for members metric_expr/metric_name/metric_group being non-NULL. Adding this element fixes the issue. Output after: [root@t35lp46 perf]# ./perf test 67 67: Parse and process metrics : Ok [root@t35lp46 perf]# Committer notes: As Ian remarks, this is not s390 specific: <quote Ian> This also shows up with address sanitizer on all architectures (perhaps change the patch title) and perhaps add a "Fixes: <commit>" tag. ================================================================= ==4718==ERROR: AddressSanitizer: global-buffer-overflow on address 0x55c93b4d59e8 at pc 0x55c93a1541e2 bp 0x7ffd24327c60 sp 0x7ffd24327c58 READ of size 8 at 0x55c93b4d59e8 thread T0 #0 0x55c93a1541e1 in find_metric tools/perf/util/metricgroup.c:764:2 #1 0x55c93a153e6c in __resolve_metric tools/perf/util/metricgroup.c:844:9 #2 0x55c93a152f18 in resolve_metric tools/perf/util/metricgroup.c:881:9 #3 0x55c93a1528db in metricgroup__add_metric tools/perf/util/metricgroup.c:943:9 #4 0x55c93a151996 in metricgroup__add_metric_list tools/perf/util/metricgroup.c:988:9 #5 0x55c93a1511b9 in parse_groups tools/perf/util/metricgroup.c:1040:8 #6 0x55c93a1513e1 in metricgroup__parse_groups_test tools/perf/util/metricgroup.c:1082:9 #7 0x55c93a0108ae in __compute_metric tools/perf/tests/parse-metric.c:159:8 #8 0x55c93a010744 in compute_metric tools/perf/tests/parse-metric.c:189:9 #9 0x55c93a00f5ee in test_ipc tools/perf/tests/parse-metric.c:208:2 #10 0x55c93a00f1e8 in test__parse_metric tools/perf/tests/parse-metric.c:345:2 #11 0x55c939fd7202 in run_test tools/perf/tests/builtin-test.c:410:9 #12 0x55c939fd6736 in test_and_print tools/perf/tests/builtin-test.c:440:9 #13 0x55c939fd58c3 in __cmd_test tools/perf/tests/builtin-test.c:661:4 #14 0x55c939fd4e02 in cmd_test tools/perf/tests/builtin-test.c:807:9 #15 0x55c939e4763d in run_builtin tools/perf/perf.c:313:11 #16 0x55c939e46475 in handle_internal_command tools/perf/perf.c:365:8 #17 0x55c939e4737e in run_argv tools/perf/perf.c:409:2 #18 0x55c939e45f7e in main tools/perf/perf.c:539:3 0x55c93b4d59e8 is located 0 bytes to the right of global variable 'pme_test' defined in 'tools/perf/tests/parse-metric.c:17:25' (0x55c93b4d54a0) of size 1352 SUMMARY: AddressSanitizer: global-buffer-overflow tools/perf/util/metricgroup.c:764:2 in find_metric Shadow bytes around the buggy address: 0x0ab9a7692ae0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692af0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692b10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692b20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 =>0x0ab9a7692b30: 00 00 00 00 00 00 00 00 00 00 00 00 00[f9]f9 f9 0x0ab9a7692b40: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 0x0ab9a7692b50: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 0x0ab9a7692b60: f9 f9 f9 f9 f9 f9 f9 f9 00 00 00 00 00 00 00 00 0x0ab9a7692b70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692b80: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Partially addressable: 01 02 03 04 05 06 07 Heap left redzone: fa Freed heap region: fd Stack left redzone: f1 Stack mid redzone: f2 Stack right redzone: f3 Stack after return: f5 Stack use after scope: f8 Global redzone: f9 Global init order: f6 Poisoned by user: f7 Container overflow: fc Array cookie: ac Intra object redzone: bb ASan internal: fe Left alloca redzone: ca Right alloca redzone: cb Shadow gap: cc </quote> I'm also adding the missing "Fixes" tag and setting just .name to NULL, as doing it that way is more compact (the compiler will zero out everything else) and the table iterators look for .name being NULL as the sentinel marking the end of the table. Fixes: 0a507af ("perf tests: Add parse metric test for ipc metric") Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Link: http://lore.kernel.org/lkml/20200825071211.16959-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Sep 24, 2020
Krzysztof Kozlowski says: ==================== nfc: s3fwrn5: Few cleanups Changes since v2: 1. Fix dtschema ID after rename (patch 1/8). 2. Apply patch 9/9 (defconfig change). Changes since v1: 1. Rename dtschema file and add additionalProperties:false, as Rob suggested, 2. Add Marek's tested-by, 3. New patches: #4, #5, #6, #7 and #9. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Sep 24, 2020
The aliases were never released causing the following leaks:
Indirect leak of 1224 byte(s) in 9 object(s) allocated from:
#0 0x7feefb830628 in malloc (/lib/x86_64-linux-gnu/libasan.so.5+0x107628)
#1 0x56332c8f1b62 in __perf_pmu__new_alias util/pmu.c:322
#2 0x56332c8f401f in pmu_add_cpu_aliases_map util/pmu.c:778
#3 0x56332c792ce9 in __test__pmu_event_aliases tests/pmu-events.c:295
#4 0x56332c792ce9 in test_aliases tests/pmu-events.c:367
#5 0x56332c76a09b in run_test tests/builtin-test.c:410
#6 0x56332c76a09b in test_and_print tests/builtin-test.c:440
#7 0x56332c76ce69 in __cmd_test tests/builtin-test.c:695
#8 0x56332c76ce69 in cmd_test tests/builtin-test.c:807
#9 0x56332c7d2214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
#10 0x56332c6701a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
#11 0x56332c6701a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
#12 0x56332c6701a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
#13 0x7feefb359cc9 in __libc_start_main ../csu/libc-start.c:308
Fixes: 956a783 ("perf test: Test pmu-events aliases")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-11-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Sep 24, 2020
The evsel->unit borrows a pointer of pmu event or alias instead of
owns a string. But tool event (duration_time) passes a result of
strdup() caused a leak.
It was found by ASAN during metric test:
Direct leak of 210 byte(s) in 70 object(s) allocated from:
#0 0x7fe366fca0b5 in strdup (/lib/x86_64-linux-gnu/libasan.so.5+0x920b5)
#1 0x559fbbcc6ea3 in add_event_tool util/parse-events.c:414
#2 0x559fbbcc6ea3 in parse_events_add_tool util/parse-events.c:1414
#3 0x559fbbd8474d in parse_events_parse util/parse-events.y:439
#4 0x559fbbcc95da in parse_events__scanner util/parse-events.c:2096
#5 0x559fbbcc95da in __parse_events util/parse-events.c:2141
#6 0x559fbbc28555 in check_parse_id tests/pmu-events.c:406
#7 0x559fbbc28555 in check_parse_id tests/pmu-events.c:393
#8 0x559fbbc28555 in check_parse_cpu tests/pmu-events.c:415
#9 0x559fbbc28555 in test_parsing tests/pmu-events.c:498
#10 0x559fbbc0109b in run_test tests/builtin-test.c:410
#11 0x559fbbc0109b in test_and_print tests/builtin-test.c:440
#12 0x559fbbc03e69 in __cmd_test tests/builtin-test.c:695
#13 0x559fbbc03e69 in cmd_test tests/builtin-test.c:807
#14 0x559fbbc691f4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
#15 0x559fbbb071a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
#16 0x559fbbb071a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
#17 0x559fbbb071a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
#18 0x7fe366b68cc9 in __libc_start_main ../csu/libc-start.c:308
Fixes: f0fbb11 ("perf stat: Implement duration_time as a proper event")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Sep 24, 2020
The test_generic_metric() missed to release entries in the pctx. Asan
reported following leak (and more):
Direct leak of 128 byte(s) in 1 object(s) allocated from:
#0 0x7f4c9396980e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e)
#1 0x55f7e748cc14 in hashmap_grow (/home/namhyung/project/linux/tools/perf/perf+0x90cc14)
#2 0x55f7e748d497 in hashmap__insert (/home/namhyung/project/linux/tools/perf/perf+0x90d497)
#3 0x55f7e7341667 in hashmap__set /home/namhyung/project/linux/tools/perf/util/hashmap.h:111
#4 0x55f7e7341667 in expr__add_ref util/expr.c:120
#5 0x55f7e7292436 in prepare_metric util/stat-shadow.c:783
#6 0x55f7e729556d in test_generic_metric util/stat-shadow.c:858
#7 0x55f7e712390b in compute_single tests/parse-metric.c:128
#8 0x55f7e712390b in __compute_metric tests/parse-metric.c:180
#9 0x55f7e712446d in compute_metric tests/parse-metric.c:196
#10 0x55f7e712446d in test_dcache_l2 tests/parse-metric.c:295
#11 0x55f7e712446d in test__parse_metric tests/parse-metric.c:355
#12 0x55f7e70be09b in run_test tests/builtin-test.c:410
#13 0x55f7e70be09b in test_and_print tests/builtin-test.c:440
#14 0x55f7e70c101a in __cmd_test tests/builtin-test.c:661
#15 0x55f7e70c101a in cmd_test tests/builtin-test.c:807
#16 0x55f7e7126214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
#17 0x55f7e6fc41a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
#18 0x55f7e6fc41a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
#19 0x55f7e6fc41a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
#20 0x7f4c93492cc9 in __libc_start_main ../csu/libc-start.c:308
Fixes: 6d432c4 ("perf tools: Add test_generic_metric function")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-8-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Sep 24, 2020
The metricgroup__add_metric() can find multiple match for a metric group
and it's possible to fail. Also it can fail in the middle like in
resolve_metric() even for single metric.
In those cases, the intermediate list and ids will be leaked like:
Direct leak of 3 byte(s) in 1 object(s) allocated from:
#0 0x7f4c938f40b5 in strdup (/lib/x86_64-linux-gnu/libasan.so.5+0x920b5)
#1 0x55f7e71c1bef in __add_metric util/metricgroup.c:683
#2 0x55f7e71c31d0 in add_metric util/metricgroup.c:906
#3 0x55f7e71c3844 in metricgroup__add_metric util/metricgroup.c:940
#4 0x55f7e71c488d in metricgroup__add_metric_list util/metricgroup.c:993
#5 0x55f7e71c488d in parse_groups util/metricgroup.c:1045
#6 0x55f7e71c60a4 in metricgroup__parse_groups_test util/metricgroup.c:1087
#7 0x55f7e71235ae in __compute_metric tests/parse-metric.c:164
#8 0x55f7e7124650 in compute_metric tests/parse-metric.c:196
#9 0x55f7e7124650 in test_recursion_fail tests/parse-metric.c:318
#10 0x55f7e7124650 in test__parse_metric tests/parse-metric.c:356
#11 0x55f7e70be09b in run_test tests/builtin-test.c:410
#12 0x55f7e70be09b in test_and_print tests/builtin-test.c:440
#13 0x55f7e70c101a in __cmd_test tests/builtin-test.c:661
#14 0x55f7e70c101a in cmd_test tests/builtin-test.c:807
#15 0x55f7e7126214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
#16 0x55f7e6fc41a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
#17 0x55f7e6fc41a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
#18 0x55f7e6fc41a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
#19 0x7f4c93492cc9 in __libc_start_main ../csu/libc-start.c:308
Fixes: 83de0b7 ("perf metric: Collect referenced metrics in struct metric_ref_node")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-9-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Sep 24, 2020
The following leaks were detected by ASAN:
Indirect leak of 360 byte(s) in 9 object(s) allocated from:
#0 0x7fecc305180e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e)
#1 0x560578f6dce5 in perf_pmu__new_format util/pmu.c:1333
#2 0x560578f752fc in perf_pmu_parse util/pmu.y:59
#3 0x560578f6a8b7 in perf_pmu__format_parse util/pmu.c:73
#4 0x560578e07045 in test__pmu tests/pmu.c:155
#5 0x560578de109b in run_test tests/builtin-test.c:410
#6 0x560578de109b in test_and_print tests/builtin-test.c:440
#7 0x560578de401a in __cmd_test tests/builtin-test.c:661
#8 0x560578de401a in cmd_test tests/builtin-test.c:807
#9 0x560578e49354 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
#10 0x560578ce71a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
#11 0x560578ce71a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
#12 0x560578ce71a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
#13 0x7fecc2b7acc9 in __libc_start_main ../csu/libc-start.c:308
Fixes: cff7f95 ("perf tests: Move pmu tests into separate object")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-12-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Oct 2, 2020
Huazhong Tan says: ==================== net: hns3: updates for -next To facilitate code maintenance and compatibility, #1 and #2 add device version to replace pci revision, #3 to #9 adds support for querying device capabilities and specifications, then the driver can use these query results to implement corresponding features (some features will be implemented later). And #10 is a minor cleanup since too many parameters for hclge_shaper_para_calc(). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Oct 2, 2020
Ido Schimmel says: ==================== mlxsw: Expose transceiver overheat counter Amit says: An overheated transceiver can be the root cause of various network problems such as link flapping. Counting the number of times a transceiver's temperature was higher than its configured threshold can therefore help in debugging such issues. This patch set exposes a transceiver overheat counter via ethtool. This is achieved by configuring the Spectrum ASIC to generate events whenever a transceiver is overheated. The temperature thresholds are queried from the transceiver (if available) and set to the default otherwise. Example: ... transceiver_overheat: 2 Patch set overview: Patches #1-#3 add required device registers Patches #4-#5 add required infrastructure in mlxsw to configure and count overheat events Patches #6-#9 gradually add support for the transceiver overheat counter Patch #10 exposes the transceiver overheat counter via ethtool ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Oct 3, 2020
With latest llvm trunk, bpf programs under samples/bpf directory, if using CORE, may experience the following errors: LLVM ERROR: Cannot select: intrinsic %llvm.preserve.struct.access.index PLEASE submit a bug report to https://bugs.llvm.org/ and include the crash backtrace. Stack dump: 0. Program arguments: llc -march=bpf -filetype=obj -o samples/bpf/test_probe_write_user_kern.o 1. Running pass 'Function Pass Manager' on module '<stdin>'. 2. Running pass 'BPF DAG->DAG Pattern Instruction Selection' on function '@bpf_prog1' #0 0x000000000183c26c llvm::sys::PrintStackTrace(llvm::raw_ostream&, int) (/data/users/yhs/work/llvm-project/llvm/build.cur/install/bin/llc+0x183c26c) ... #7 0x00000000017c375e (/data/users/yhs/work/llvm-project/llvm/build.cur/install/bin/llc+0x17c375e) #8 0x00000000016a75c5 llvm::SelectionDAGISel::CannotYetSelect(llvm::SDNode*) (/data/users/yhs/work/llvm-project/llvm/build.cur/install/bin/llc+0x16a75c5) #9 0x00000000016ab4f8 llvm::SelectionDAGISel::SelectCodeCommon(llvm::SDNode*, unsigned char const*, unsigned int) (/data/users/yhs/work/llvm-project/llvm/build.cur/install/bin/llc+0x16ab4f8) ... Aborted (core dumped) | llc -march=bpf -filetype=obj -o samples/bpf/test_probe_write_user_kern.o The reason is due to llvm change https://reviews.llvm.org/D87153 where the CORE relocation global generation is moved from the beginning of target dependent optimization (llc) to the beginning of target independent optimization (opt). Since samples/bpf programs did not use vmlinux.h and its clang compilation uses native architecture, we need to adjust arch triple at opt level to do CORE relocation global generation properly. Otherwise, the above error will appear. This patch fixed the issue by introduce opt and llvm-dis to compilation chain, which will do proper CORE relocation global generation as well as O2 level optimization. Tested with llvm10, llvm11 and trunk/llvm12. Signed-off-by: Yonghong Song <yhs@fb.com>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Oct 5, 2020
With latest llvm trunk, bpf programs under samples/bpf directory, if using CORE, may experience the following errors: LLVM ERROR: Cannot select: intrinsic %llvm.preserve.struct.access.index PLEASE submit a bug report to https://bugs.llvm.org/ and include the crash backtrace. Stack dump: 0. Program arguments: llc -march=bpf -filetype=obj -o samples/bpf/test_probe_write_user_kern.o 1. Running pass 'Function Pass Manager' on module '<stdin>'. 2. Running pass 'BPF DAG->DAG Pattern Instruction Selection' on function '@bpf_prog1' #0 0x000000000183c26c llvm::sys::PrintStackTrace(llvm::raw_ostream&, int) (/data/users/yhs/work/llvm-project/llvm/build.cur/install/bin/llc+0x183c26c) ... #7 0x00000000017c375e (/data/users/yhs/work/llvm-project/llvm/build.cur/install/bin/llc+0x17c375e) #8 0x00000000016a75c5 llvm::SelectionDAGISel::CannotYetSelect(llvm::SDNode*) (/data/users/yhs/work/llvm-project/llvm/build.cur/install/bin/llc+0x16a75c5) #9 0x00000000016ab4f8 llvm::SelectionDAGISel::SelectCodeCommon(llvm::SDNode*, unsigned char const*, unsigned int) (/data/users/yhs/work/llvm-project/llvm/build.cur/install/bin/llc+0x16ab4f8) ... Aborted (core dumped) | llc -march=bpf -filetype=obj -o samples/bpf/test_probe_write_user_kern.o The reason is due to llvm change https://reviews.llvm.org/D87153 where the CORE relocation global generation is moved from the beginning of target dependent optimization (llc) to the beginning of target independent optimization (opt). Since samples/bpf programs did not use vmlinux.h and its clang compilation uses native architecture, we need to adjust arch triple at opt level to do CORE relocation global generation properly. Otherwise, the above error will appear. This patch fixed the issue by introduce opt and llvm-dis to compilation chain, which will do proper CORE relocation global generation as well as O2 level optimization. Tested with llvm10, llvm11 and trunk/llvm12. Signed-off-by: Yonghong Song <yhs@fb.com>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Oct 5, 2020
With latest llvm trunk, bpf programs under samples/bpf directory, if using CORE, may experience the following errors: LLVM ERROR: Cannot select: intrinsic %llvm.preserve.struct.access.index PLEASE submit a bug report to https://bugs.llvm.org/ and include the crash backtrace. Stack dump: 0. Program arguments: llc -march=bpf -filetype=obj -o samples/bpf/test_probe_write_user_kern.o 1. Running pass 'Function Pass Manager' on module '<stdin>'. 2. Running pass 'BPF DAG->DAG Pattern Instruction Selection' on function '@bpf_prog1' #0 0x000000000183c26c llvm::sys::PrintStackTrace(llvm::raw_ostream&, int) (/data/users/yhs/work/llvm-project/llvm/build.cur/install/bin/llc+0x183c26c) ... #7 0x00000000017c375e (/data/users/yhs/work/llvm-project/llvm/build.cur/install/bin/llc+0x17c375e) #8 0x00000000016a75c5 llvm::SelectionDAGISel::CannotYetSelect(llvm::SDNode*) (/data/users/yhs/work/llvm-project/llvm/build.cur/install/bin/llc+0x16a75c5) #9 0x00000000016ab4f8 llvm::SelectionDAGISel::SelectCodeCommon(llvm::SDNode*, unsigned char const*, unsigned int) (/data/users/yhs/work/llvm-project/llvm/build.cur/install/bin/llc+0x16ab4f8) ... Aborted (core dumped) | llc -march=bpf -filetype=obj -o samples/bpf/test_probe_write_user_kern.o The reason is due to llvm change https://reviews.llvm.org/D87153 where the CORE relocation global generation is moved from the beginning of target dependent optimization (llc) to the beginning of target independent optimization (opt). Since samples/bpf programs did not use vmlinux.h and its clang compilation uses native architecture, we need to adjust arch triple at opt level to do CORE relocation global generation properly. Otherwise, the above error will appear. This patch fixed the issue by introduce opt and llvm-dis to compilation chain, which will do proper CORE relocation global generation as well as O2 level optimization. Tested with llvm10, llvm11 and trunk/llvm12. Signed-off-by: Yonghong Song <yhs@fb.com>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Oct 5, 2020
With latest llvm trunk, bpf programs under samples/bpf directory, if using CORE, may experience the following errors: LLVM ERROR: Cannot select: intrinsic %llvm.preserve.struct.access.index PLEASE submit a bug report to https://bugs.llvm.org/ and include the crash backtrace. Stack dump: 0. Program arguments: llc -march=bpf -filetype=obj -o samples/bpf/test_probe_write_user_kern.o 1. Running pass 'Function Pass Manager' on module '<stdin>'. 2. Running pass 'BPF DAG->DAG Pattern Instruction Selection' on function '@bpf_prog1' #0 0x000000000183c26c llvm::sys::PrintStackTrace(llvm::raw_ostream&, int) (/data/users/yhs/work/llvm-project/llvm/build.cur/install/bin/llc+0x183c26c) ... #7 0x00000000017c375e (/data/users/yhs/work/llvm-project/llvm/build.cur/install/bin/llc+0x17c375e) #8 0x00000000016a75c5 llvm::SelectionDAGISel::CannotYetSelect(llvm::SDNode*) (/data/users/yhs/work/llvm-project/llvm/build.cur/install/bin/llc+0x16a75c5) #9 0x00000000016ab4f8 llvm::SelectionDAGISel::SelectCodeCommon(llvm::SDNode*, unsigned char const*, unsigned int) (/data/users/yhs/work/llvm-project/llvm/build.cur/install/bin/llc+0x16ab4f8) ... Aborted (core dumped) | llc -march=bpf -filetype=obj -o samples/bpf/test_probe_write_user_kern.o The reason is due to llvm change https://reviews.llvm.org/D87153 where the CORE relocation global generation is moved from the beginning of target dependent optimization (llc) to the beginning of target independent optimization (opt). Since samples/bpf programs did not use vmlinux.h and its clang compilation uses native architecture, we need to adjust arch triple at opt level to do CORE relocation global generation properly. Otherwise, the above error will appear. This patch fixed the issue by introduce opt and llvm-dis to compilation chain, which will do proper CORE relocation global generation as well as O2 level optimization. Tested with llvm10, llvm11 and trunk/llvm12. Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Andrii Nakryiko <andrii@kernel.org>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Oct 5, 2020
With latest llvm trunk, bpf programs under samples/bpf directory, if using CORE, may experience the following errors: LLVM ERROR: Cannot select: intrinsic %llvm.preserve.struct.access.index PLEASE submit a bug report to https://bugs.llvm.org/ and include the crash backtrace. Stack dump: 0. Program arguments: llc -march=bpf -filetype=obj -o samples/bpf/test_probe_write_user_kern.o 1. Running pass 'Function Pass Manager' on module '<stdin>'. 2. Running pass 'BPF DAG->DAG Pattern Instruction Selection' on function '@bpf_prog1' #0 0x000000000183c26c llvm::sys::PrintStackTrace(llvm::raw_ostream&, int) (/data/users/yhs/work/llvm-project/llvm/build.cur/install/bin/llc+0x183c26c) ... #7 0x00000000017c375e (/data/users/yhs/work/llvm-project/llvm/build.cur/install/bin/llc+0x17c375e) #8 0x00000000016a75c5 llvm::SelectionDAGISel::CannotYetSelect(llvm::SDNode*) (/data/users/yhs/work/llvm-project/llvm/build.cur/install/bin/llc+0x16a75c5) #9 0x00000000016ab4f8 llvm::SelectionDAGISel::SelectCodeCommon(llvm::SDNode*, unsigned char const*, unsigned int) (/data/users/yhs/work/llvm-project/llvm/build.cur/install/bin/llc+0x16ab4f8) ... Aborted (core dumped) | llc -march=bpf -filetype=obj -o samples/bpf/test_probe_write_user_kern.o The reason is due to llvm change https://reviews.llvm.org/D87153 where the CORE relocation global generation is moved from the beginning of target dependent optimization (llc) to the beginning of target independent optimization (opt). Since samples/bpf programs did not use vmlinux.h and its clang compilation uses native architecture, we need to adjust arch triple at opt level to do CORE relocation global generation properly. Otherwise, the above error will appear. This patch fixed the issue by introduce opt and llvm-dis to compilation chain, which will do proper CORE relocation global generation as well as O2 level optimization. Tested with llvm10, llvm11 and trunk/llvm12. Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Andrii Nakryiko <andrii@kernel.org>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Oct 5, 2020
With latest llvm trunk, bpf programs under samples/bpf directory, if using CORE, may experience the following errors: LLVM ERROR: Cannot select: intrinsic %llvm.preserve.struct.access.index PLEASE submit a bug report to https://bugs.llvm.org/ and include the crash backtrace. Stack dump: 0. Program arguments: llc -march=bpf -filetype=obj -o samples/bpf/test_probe_write_user_kern.o 1. Running pass 'Function Pass Manager' on module '<stdin>'. 2. Running pass 'BPF DAG->DAG Pattern Instruction Selection' on function '@bpf_prog1' #0 0x000000000183c26c llvm::sys::PrintStackTrace(llvm::raw_ostream&, int) (/data/users/yhs/work/llvm-project/llvm/build.cur/install/bin/llc+0x183c26c) ... #7 0x00000000017c375e (/data/users/yhs/work/llvm-project/llvm/build.cur/install/bin/llc+0x17c375e) #8 0x00000000016a75c5 llvm::SelectionDAGISel::CannotYetSelect(llvm::SDNode*) (/data/users/yhs/work/llvm-project/llvm/build.cur/install/bin/llc+0x16a75c5) #9 0x00000000016ab4f8 llvm::SelectionDAGISel::SelectCodeCommon(llvm::SDNode*, unsigned char const*, unsigned int) (/data/users/yhs/work/llvm-project/llvm/build.cur/install/bin/llc+0x16ab4f8) ... Aborted (core dumped) | llc -march=bpf -filetype=obj -o samples/bpf/test_probe_write_user_kern.o The reason is due to llvm change https://reviews.llvm.org/D87153 where the CORE relocation global generation is moved from the beginning of target dependent optimization (llc) to the beginning of target independent optimization (opt). Since samples/bpf programs did not use vmlinux.h and its clang compilation uses native architecture, we need to adjust arch triple at opt level to do CORE relocation global generation properly. Otherwise, the above error will appear. This patch fixed the issue by introduce opt and llvm-dis to compilation chain, which will do proper CORE relocation global generation as well as O2 level optimization. Tested with llvm10, llvm11 and trunk/llvm12. Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Andrii Nakryiko <andrii@kernel.org>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Oct 6, 2020
With latest llvm trunk, bpf programs under samples/bpf directory, if using CORE, may experience the following errors: LLVM ERROR: Cannot select: intrinsic %llvm.preserve.struct.access.index PLEASE submit a bug report to https://bugs.llvm.org/ and include the crash backtrace. Stack dump: 0. Program arguments: llc -march=bpf -filetype=obj -o samples/bpf/test_probe_write_user_kern.o 1. Running pass 'Function Pass Manager' on module '<stdin>'. 2. Running pass 'BPF DAG->DAG Pattern Instruction Selection' on function '@bpf_prog1' #0 0x000000000183c26c llvm::sys::PrintStackTrace(llvm::raw_ostream&, int) (/data/users/yhs/work/llvm-project/llvm/build.cur/install/bin/llc+0x183c26c) ... #7 0x00000000017c375e (/data/users/yhs/work/llvm-project/llvm/build.cur/install/bin/llc+0x17c375e) #8 0x00000000016a75c5 llvm::SelectionDAGISel::CannotYetSelect(llvm::SDNode*) (/data/users/yhs/work/llvm-project/llvm/build.cur/install/bin/llc+0x16a75c5) #9 0x00000000016ab4f8 llvm::SelectionDAGISel::SelectCodeCommon(llvm::SDNode*, unsigned char const*, unsigned int) (/data/users/yhs/work/llvm-project/llvm/build.cur/install/bin/llc+0x16ab4f8) ... Aborted (core dumped) | llc -march=bpf -filetype=obj -o samples/bpf/test_probe_write_user_kern.o The reason is due to llvm change https://reviews.llvm.org/D87153 where the CORE relocation global generation is moved from the beginning of target dependent optimization (llc) to the beginning of target independent optimization (opt). Since samples/bpf programs did not use vmlinux.h and its clang compilation uses native architecture, we need to adjust arch triple at opt level to do CORE relocation global generation properly. Otherwise, the above error will appear. This patch fixed the issue by introduce opt and llvm-dis to compilation chain, which will do proper CORE relocation global generation as well as O2 level optimization. Tested with llvm10, llvm11 and trunk/llvm12. Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Mar 10, 2021
The evlist and the cpu/thread maps should be released together.
Otherwise following error was reported by Asan.
Note that this test still has memory leaks in DSOs so it still fails
even after this change. I'll take a look at that too.
# perf test -v 26
26: Object code reading :
--- start ---
test child forked, pid 154184
Looking at the vmlinux_path (8 entries long)
symsrc__init: build id mismatch for vmlinux.
symsrc__init: cannot get elf header.
Using /proc/kcore for kernel data
Using /proc/kallsyms for symbols
Parsing event 'cycles'
mmap size 528384B
...
=================================================================
==154184==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 439 byte(s) in 1 object(s) allocated from:
#0 0x7fcb66e77037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
#1 0x55ad9b7e821e in dso__new_id util/dso.c:1256
#2 0x55ad9b8cfd4a in __machine__addnew_vdso util/vdso.c:132
#3 0x55ad9b8cfd4a in machine__findnew_vdso util/vdso.c:347
#4 0x55ad9b845b7e in map__new util/map.c:176
#5 0x55ad9b8415a2 in machine__process_mmap2_event util/machine.c:1787
#6 0x55ad9b8fab16 in perf_tool__process_synth_event util/synthetic-events.c:64
#7 0x55ad9b8fab16 in perf_event__synthesize_mmap_events util/synthetic-events.c:499
#8 0x55ad9b8fbfdf in __event__synthesize_thread util/synthetic-events.c:741
#9 0x55ad9b8ff3e3 in perf_event__synthesize_thread_map util/synthetic-events.c:833
#10 0x55ad9b738585 in do_test_code_reading tests/code-reading.c:608
#11 0x55ad9b73b25d in test__code_reading tests/code-reading.c:722
#12 0x55ad9b6f28fb in run_test tests/builtin-test.c:428
#13 0x55ad9b6f28fb in test_and_print tests/builtin-test.c:458
#14 0x55ad9b6f4a53 in __cmd_test tests/builtin-test.c:679
#15 0x55ad9b6f4a53 in cmd_test tests/builtin-test.c:825
#16 0x55ad9b760cc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#17 0x55ad9b5eaa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#18 0x55ad9b5eaa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#19 0x55ad9b5eaa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#20 0x7fcb669acd09 in __libc_start_main ../csu/libc-start.c:308
...
SUMMARY: AddressSanitizer: 471 byte(s) leaked in 2 allocation(s).
test child finished with 1
---- end ----
Object code reading: FAILED!
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Mar 10, 2021
The evlist and the cpu/thread maps should be released together.
Otherwise following error was reported by Asan.
$ perf test -v 28
28: Use a dummy software event to keep tracking:
--- start ---
test child forked, pid 156810
mmap size 528384B
=================================================================
==156810==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 40 byte(s) in 1 object(s) allocated from:
#0 0x7f637d2bce8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
#1 0x55cc6295cffa in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79
#2 0x55cc6295da1f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149
#3 0x55cc6295e1df in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166
#4 0x55cc6295e1df in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181
#5 0x55cc626287cf in test__keep_tracking tests/keep-tracking.c:84
#6 0x55cc625e38fb in run_test tests/builtin-test.c:428
#7 0x55cc625e38fb in test_and_print tests/builtin-test.c:458
#8 0x55cc625e5a53 in __cmd_test tests/builtin-test.c:679
#9 0x55cc625e5a53 in cmd_test tests/builtin-test.c:825
#10 0x55cc62651cc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#11 0x55cc624dba88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#12 0x55cc624dba88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#13 0x55cc624dba88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#14 0x7f637cdf2d09 in __libc_start_main ../csu/libc-start.c:308
SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s).
test child finished with 1
---- end ----
Use a dummy software event to keep tracking: FAILED!
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-7-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Mar 10, 2021
The evlist and cpu/thread maps should be released together.
Otherwise the following error was reported by Asan.
$ perf test -v 35
35: Track with sched_switch :
--- start ---
test child forked, pid 159287
Using CPUID GenuineIntel-6-8E-C
mmap size 528384B
1295 events recorded
=================================================================
==159287==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 40 byte(s) in 1 object(s) allocated from:
#0 0x7fa28d9a2e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
#1 0x5652f5a5affa in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79
#2 0x5652f5a5ba1f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149
#3 0x5652f5a5c1df in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166
#4 0x5652f5a5c1df in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181
#5 0x5652f5723bbf in test__switch_tracking tests/switch-tracking.c:350
#6 0x5652f56e18fb in run_test tests/builtin-test.c:428
#7 0x5652f56e18fb in test_and_print tests/builtin-test.c:458
#8 0x5652f56e3a53 in __cmd_test tests/builtin-test.c:679
#9 0x5652f56e3a53 in cmd_test tests/builtin-test.c:825
#10 0x5652f574fcc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#11 0x5652f55d9a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#12 0x5652f55d9a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#13 0x5652f55d9a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#14 0x7fa28d4d8d09 in __libc_start_main ../csu/libc-start.c:308
SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s).
test child finished with 1
---- end ----
Track with sched_switch: FAILED!
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-8-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Mar 10, 2021
It missed to call perf_thread_map__put() after using the map.
$ perf test -v 43
43: Synthesize thread map :
--- start ---
test child forked, pid 162640
=================================================================
==162640==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 32 byte(s) in 1 object(s) allocated from:
#0 0x7fd48cdaa1f8 in __interceptor_realloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:164
#1 0x563e6d5f8d0e in perf_thread_map__realloc /home/namhyung/project/linux/tools/lib/perf/threadmap.c:23
#2 0x563e6d3ef69a in thread_map__new_by_pid util/thread_map.c:46
#3 0x563e6d2cec90 in test__thread_map_synthesize tests/thread-map.c:97
#4 0x563e6d27d8fb in run_test tests/builtin-test.c:428
#5 0x563e6d27d8fb in test_and_print tests/builtin-test.c:458
#6 0x563e6d27fa53 in __cmd_test tests/builtin-test.c:679
#7 0x563e6d27fa53 in cmd_test tests/builtin-test.c:825
#8 0x563e6d2ebce4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#9 0x563e6d175a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#10 0x563e6d175a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#11 0x563e6d175a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#12 0x7fd48c8dfd09 in __libc_start_main ../csu/libc-start.c:308
SUMMARY: AddressSanitizer: 8224 byte(s) leaked in 2 allocation(s).
test child finished with 1
---- end ----
Synthesize thread map: FAILED!
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-9-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Mar 10, 2021
It should be released after printing the map.
$ perf test -v 52
52: Print cpu map :
--- start ---
test child forked, pid 172233
=================================================================
==172233==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 156 byte(s) in 1 object(s) allocated from:
#0 0x7fc472518e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
#1 0x55e63b378f7a in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79
#2 0x55e63b37a05c in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:237
#3 0x55e63b056d16 in cpu_map_print tests/cpumap.c:102
#4 0x55e63b056d16 in test__cpu_map_print tests/cpumap.c:120
#5 0x55e63afff8fb in run_test tests/builtin-test.c:428
#6 0x55e63afff8fb in test_and_print tests/builtin-test.c:458
#7 0x55e63b001a53 in __cmd_test tests/builtin-test.c:679
#8 0x55e63b001a53 in cmd_test tests/builtin-test.c:825
#9 0x55e63b06dc44 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#10 0x55e63aef7a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#11 0x55e63aef7a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#12 0x55e63aef7a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#13 0x7fc47204ed09 in __libc_start_main ../csu/libc-start.c:308
...
SUMMARY: AddressSanitizer: 448 byte(s) leaked in 7 allocation(s).
test child finished with 1
---- end ----
Print cpu map: FAILED!
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-11-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Mar 10, 2021
It should release the maps at the end.
$ perf test -v 71
71: Convert perf time to TSC :
--- start ---
test child forked, pid 178744
mmap size 528384B
1st event perf time 59207256505278 tsc 13187166645142
rdtsc time 59207256542151 tsc 13187166723020
2nd event perf time 59207256543749 tsc 13187166726393
=================================================================
==178744==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 40 byte(s) in 1 object(s) allocated from:
#0 0x7faf601f9e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
#1 0x55b620cfc00a in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79
#2 0x55b620cfca2f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149
#3 0x55b620cfd1ef in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166
#4 0x55b620cfd1ef in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181
#5 0x55b6209ef1b2 in test__perf_time_to_tsc tests/perf-time-to-tsc.c:73
#6 0x55b6209828fb in run_test tests/builtin-test.c:428
#7 0x55b6209828fb in test_and_print tests/builtin-test.c:458
#8 0x55b620984a53 in __cmd_test tests/builtin-test.c:679
#9 0x55b620984a53 in cmd_test tests/builtin-test.c:825
#10 0x55b6209f0cd4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#11 0x55b62087aa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#12 0x55b62087aa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#13 0x55b62087aa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#14 0x7faf5fd2fd09 in __libc_start_main ../csu/libc-start.c:308
SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s).
test child finished with 1
---- end ----
Convert perf time to TSC: FAILED!
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-12-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Mar 10, 2021
I got a segfault when using -r option with event groups. The option
makes it run the workload multiple times and it will reuse the evlist
and evsel for each run.
While most of resources are allocated and freed properly, the id hash
in the evlist was not and it resulted in the bug. You can see it with
the address sanitizer like below:
$ perf stat -r 100 -e '{cycles,instructions}' true
=================================================================
==693052==ERROR: AddressSanitizer: heap-use-after-free on
address 0x6080000003d0 at pc 0x558c57732835 bp 0x7fff1526adb0 sp 0x7fff1526ada8
WRITE of size 8 at 0x6080000003d0 thread T0
#0 0x558c57732834 in hlist_add_head /home/namhyung/project/linux/tools/include/linux/list.h:644
#1 0x558c57732834 in perf_evlist__id_hash /home/namhyung/project/linux/tools/lib/perf/evlist.c:237
#2 0x558c57732834 in perf_evlist__id_add /home/namhyung/project/linux/tools/lib/perf/evlist.c:244
#3 0x558c57732834 in perf_evlist__id_add_fd /home/namhyung/project/linux/tools/lib/perf/evlist.c:285
#4 0x558c5747733e in store_evsel_ids util/evsel.c:2765
#5 0x558c5747733e in evsel__store_ids util/evsel.c:2782
#6 0x558c5730b717 in __run_perf_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:895
#7 0x558c5730b717 in run_perf_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:1014
#8 0x558c5730b717 in cmd_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:2446
#9 0x558c57427c24 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#10 0x558c572b1a48 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#11 0x558c572b1a48 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#12 0x558c572b1a48 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#13 0x7fcadb9f7d09 in __libc_start_main ../csu/libc-start.c:308
#14 0x558c572b60f9 in _start (/home/namhyung/project/linux/tools/perf/perf+0x45d0f9)
Actually the nodes in the hash table are struct perf_stream_id and
they were freed in the previous run. Fix it by resetting the hash.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210225035148.778569-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Mar 26, 2021
Ido Schimmel says: ==================== mlxsw: Add support for egress and policy-based sampling So far mlxsw only supported ingress sampling using matchall classifier. This series adds support for egress sampling and policy-based sampling using flower classifier on Spectrum-2 and newer ASICs. As such, it is now possible to issue these commands: # tc filter add dev swp1 egress pref 1 proto all matchall action sample rate 100 group 1 # tc filter add dev swp2 ingress pref 1 proto ip flower dst_ip 198.51.100.1 action sample rate 100 group 2 When performing egress sampling (using either matchall or flower) the ASIC is able to report the end-to-end latency which is passed to the psample module. Series overview: Patches #1-#3 are preparations without any functional changes Patch #4 generalizes the idea of sampling triggers and creates a hash table to track active sampling triggers in preparation for egress and policy-based triggers. The motivation is explained in the changelog Patch #5 flips mlxsw to start using this hash table instead of storing ingress sampling triggers as an attribute of the sampled port Patch #6 finally adds support for egress sampling using matchall classifier Patches #7-#8 add support for policy-based sampling using flower classifier Patches #9 extends the mlxsw sampling selftest to cover the new triggers Patch #10 makes sure that egress sampling configuration only fails on Spectrum-1 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Mar 26, 2021
Ido Schimmel says: ==================== mlxsw: Preparations for resilient nexthop groups This patchset contains preparations for resilient nexthop groups support in mlxsw. A follow-up patchset will add support and selftests. Most of the patches are trivial and small to make review easier. Patchset overview: Patch #1 removes RTNL assertion in nexthop notifier block since it is not needed. The assertion will trigger when mlxsw starts processing notifications related to resilient groups as not all are emitted with RTNL held. Patches #2-#9 gradually add support for nexthops with trap action. Up until now mlxsw did not program nexthops whose neighbour entry was not resolved. This will not work with resilient groups as their size is fixed and the nexthop mapped to each bucket is determined by the nexthop code. Therefore, nexthops whose neighbour entry is not resolved will be programmed to trap packets to the CPU in order to trigger neighbour resolution. Patch #10 is a non-functional change to allow for code reuse between regular nexthop groups and resilient ones. Patch #11 avoids unnecessary neighbour updates in hardware. See the commit message for a detailed explanation. Patches #12-#14 add support for additional nexthop group sizes that are supported by Spectrum-{2,3} ASICs. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Mar 26, 2021
Pablo Neira Ayuso says:
====================
netfilter: flowtable enhancements
[ This is v2 that includes documentation enhancements, including
existing limitations. This is a rebase on top on net-next. ]
The following patchset augments the Netfilter flowtable fastpath to
support for network topologies that combine IP forwarding, bridge,
classic VLAN devices, bridge VLAN filtering, DSA and PPPoE. This
includes support for the flowtable software and hardware datapaths.
The following pictures provides an example scenario:
fast path!
.------------------------.
/ \
| IP forwarding |
| / \ \/
| br0 wan ..... eth0
. / \ host C
-> veth1 veth2
. switch/router
.
.
eth0
host A
The bridge master device 'br0' has an IP address and a DHCP server is
also assumed to be running to provide connectivity to host A which
reaches the Internet through 'br0' as default gateway. Then, packet
enters the IP forwarding path and Netfilter is used to NAT the packets
before they leave through the wan device.
The general idea is to accelerate forwarding by building a fast path
that takes packets from the ingress path of the bridge port and place
them in the egress path of the wan device (and vice versa). Hence,
skipping the classic bridge and IP stack paths.
** Patch from #1 to #6 add the infrastructure which describes the list of
netdevice hops to reach a given destination MAC address in the local
network topology.
Patch #1 adds dev_fill_forward_path() and .ndo_fill_forward_path() to
netdev_ops.
Patch #2 adds .ndo_fill_forward_path for vlan devices, which provides
the next device hop via vlan->real_dev, the vlan ID and the
protocol.
Patch #3 adds .ndo_fill_forward_path for bridge devices, which allows to make
lookups to the FDB to locate the next device hop (bridge port) in the
forwarding path.
Patch #4 extends bridge .ndo_fill_forward_path to support for bridge VLAN
filtering.
Patch #5 adds .ndo_fill_forward_path for PPPoE devices.
Patch #6 adds .ndo_fill_forward_path for DSA.
Patches from #7 to #14 update the flowtable software datapath:
Patch #7 adds the transmit path type field to the flow tuple. Two transmit
paths are supported so far: the neighbour and the xfrm transmit
paths.
Patch #8 and #9 update the flowtable datapath to use dev_fill_forward_path()
to obtain the real ingress/egress device for the flowtable datapath.
This adds the new ethernet xmit direct path to the flowtable.
Patch #10 adds native flowtable VLAN support (up to 2 VLAN tags) through
dev_fill_forward_path(). The flowtable stores the VLAN id and
protocol in the flow tuple.
Patch #11 adds native flowtable bridge VLAN filter support through
dev_fill_forward_path().
Patch #12 adds native flowtable bridge PPPoE through dev_fill_forward_path().
Patch #13 adds DSA support through dev_fill_forward_path().
Patch #14 extends flowtable selftests to cover for flowtable software
datapath enhancements.
** Patches from #15 to #20 update the flowtable hardware offload datapath:
Patch #15 extends the flowtable hardware offload to support for the
direct ethernet xmit path. This also includes VLAN support.
Patch #16 stores the egress real device in the flow tuple. The software
flowtable datapath uses dev_hard_header() to transmit packets,
hence it might refer to VLAN/DSA/PPPoE software device, not
the real ethernet device.
Patch #17 deals with switchdev PVID hardware offload to skip it on
egress.
Patch #18 adds FLOW_ACTION_PPPOE_PUSH to the flow_offload action API.
Patch #19 extends the flowtable hardware offload to support for PPPoE
Patch #20 adds TC_SETUP_FT support for DSA.
** Patches from #20 to #23: Felix Fietkau adds a new driver which support
hardware offload for the mtk PPE engine through the existing flow
offload API which supports for the flowtable enhancements coming in
this batch.
Patch #24 extends the documentation and describe existing limitations.
Please, apply, thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Mar 26, 2021
Ido Schimmel says: ==================== mlxsw: Add support for resilient nexthop groups This patchset adds support for resilient nexthop groups in mlxsw. As far as the hardware is concerned, resilient groups are the same as regular groups. The differences lie in how mlxsw manages the individual adjacency entries (nexthop buckets) that make up the group. The first difference is that unlike regular groups the driver needs to periodically update the kernel about activity of nexthop buckets so that the kernel will not treat the buckets as idle, given traffic is offloaded from the CPU to the ASIC. This is similar to what mlxsw is already doing with respect to neighbour entries. The update interval is set to 1 second to allow for short idle timers. The second difference is that nexthop buckets that correspond to an unresolved neighbour must be programmed to the device, as the size of the group must remain fixed. This is achieved by programming such entries with trap action, in order to trigger neighbour resolution by the kernel. The third difference is atomic replacement of individual nexthop buckets. While the driver periodically updates the kernel about activity of nexthop buckets, it is possible for a bucket to become active just before the kernel decides to replace it with a different nexthop. To avoid such situations and connections being reset, the driver instructs the device to only replace an adjacency entry if it is inactive. Failures are propagated back to the nexthop code. Patchset overview: Patches #1-#7 gradually add support for resilient nexthop groups Patch #8 finally enables such groups to be programmed to the device Patches #9-#10 add mlxsw-specific selftests ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Apr 16, 2021
I got several memory leak reports from Asan with a simple command. It
was because VDSO is not released due to the refcount. Like in
__dsos_addnew_id(), it should put the refcount after adding to the list.
$ perf record true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.030 MB perf.data (10 samples) ]
=================================================================
==692599==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 439 byte(s) in 1 object(s) allocated from:
#0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
#1 0x559bce4aa8ee in dso__new_id util/dso.c:1256
#2 0x559bce59245a in __machine__addnew_vdso util/vdso.c:132
#3 0x559bce59245a in machine__findnew_vdso util/vdso.c:347
#4 0x559bce50826c in map__new util/map.c:175
#5 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787
#6 0x559bce512f6b in machines__deliver_event util/session.c:1481
#7 0x559bce515107 in perf_session__deliver_event util/session.c:1551
#8 0x559bce51d4d2 in do_flush util/ordered-events.c:244
#9 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323
#10 0x559bce519bea in __perf_session__process_events util/session.c:2268
#11 0x559bce519bea in perf_session__process_events util/session.c:2297
#12 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017
#13 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234
#14 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026
#15 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858
#16 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#17 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#18 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#19 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#20 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308
Indirect leak of 32 byte(s) in 1 object(s) allocated from:
#0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
#1 0x559bce520907 in nsinfo__copy util/namespaces.c:169
#2 0x559bce50821b in map__new util/map.c:168
#3 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787
#4 0x559bce512f6b in machines__deliver_event util/session.c:1481
#5 0x559bce515107 in perf_session__deliver_event util/session.c:1551
#6 0x559bce51d4d2 in do_flush util/ordered-events.c:244
#7 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323
#8 0x559bce519bea in __perf_session__process_events util/session.c:2268
#9 0x559bce519bea in perf_session__process_events util/session.c:2297
#10 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017
#11 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234
#12 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026
#13 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858
#14 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#15 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#16 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#17 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#18 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308
SUMMARY: AddressSanitizer: 471 byte(s) leaked in 2 allocation(s).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210315045641.700430-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Apr 26, 2021
The following deadlock is detected: truncate -> setattr path is waiting for pending direct IO to be done (inode->i_dio_count become zero) with inode->i_rwsem held (down_write). PID: 14827 TASK: ffff881686a9af80 CPU: 20 COMMAND: "ora_p005_hrltd9" #0 __schedule at ffffffff818667cc #1 schedule at ffffffff81866de6 #2 inode_dio_wait at ffffffff812a2d04 #3 ocfs2_setattr at ffffffffc05f322e [ocfs2] #4 notify_change at ffffffff812a5a09 #5 do_truncate at ffffffff812808f5 #6 do_sys_ftruncate.constprop.18 at ffffffff81280cf2 #7 sys_ftruncate at ffffffff81280d8e #8 do_syscall_64 at ffffffff81003949 #9 entry_SYSCALL_64_after_hwframe at ffffffff81a001ad dio completion path is going to complete one direct IO (decrement inode->i_dio_count), but before that it hung at locking inode->i_rwsem: #0 __schedule+700 at ffffffff818667cc #1 schedule+54 at ffffffff81866de6 #2 rwsem_down_write_failed+536 at ffffffff8186aa28 #3 call_rwsem_down_write_failed+23 at ffffffff8185a1b7 #4 down_write+45 at ffffffff81869c9d #5 ocfs2_dio_end_io_write+180 at ffffffffc05d5444 [ocfs2] #6 ocfs2_dio_end_io+85 at ffffffffc05d5a85 [ocfs2] #7 dio_complete+140 at ffffffff812c873c #8 dio_aio_complete_work+25 at ffffffff812c89f9 #9 process_one_work+361 at ffffffff810b1889 #10 worker_thread+77 at ffffffff810b233d #11 kthread+261 at ffffffff810b7fd5 #12 ret_from_fork+62 at ffffffff81a0035e Thus above forms ABBA deadlock. The same deadlock was mentioned in upstream commit 28f5a8a ("ocfs2: should wait dio before inode lock in ocfs2_setattr()"). It seems that that commit only removed the cluster lock (the victim of above dead lock) from the ABBA deadlock party. End-user visible effects: Process hang in truncate -> ocfs2_setattr path and other processes hang at ocfs2_dio_end_io_write path. This is to fix the deadlock itself. It removes inode_lock() call from dio completion path to remove the deadlock and add ip_alloc_sem lock in setattr path to synchronize the inode modifications. [wen.gang.wang@oracle.com: remove the "had_alloc_lock" as suggested] Link: https://lkml.kernel.org/r/20210402171344.1605-1-wen.gang.wang@oracle.com Link: https://lkml.kernel.org/r/20210331203654.3911-1-wen.gang.wang@oracle.com Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Apr 26, 2021
Petr Machata says: ==================== mlxsw: Refactor qdisc offload Currently, mlxsw admits for offload a suitable root qdisc, and its children. Thus up to two levels of hierarchy are offloaded. Often, this is enough: one can configure TCs with RED and TCs with a shaper, and can even see counters for each TC by looking at a qdisc at a sufficiently shallow position. While simple, the system has obvious shortcomings. It is not possible to configure both RED and shaping on one TC. It is not possible to place a PRIO below root TBF, which would then be offloaded as port shaper. FIFOs are only offloaded at root or directly below, which is confusing to users, because RED and TBF of course have their own FIFO. This patchset is a step towards the end goal of allowing more comprehensive qdisc tree offload and cleans up the qdisc offload code. - Patches #1-#4 contain small cleanups. - Up until now, since mlxsw offloaded only a very simple qdisc configurations, basically all bookkeeping was done using one container for the root qdisc, and 8 containers for its children. Patches #5, #6, #8 and #9 gradually introduce a more dynamic structure, where parent-child relationships are tracked directly at qdiscs, instead of being implicit. - This tree management assumes only one qdisc is created at a time. In FIFO handlers, this condition was enforced simply by asserting RTNL lock. But instead of furthering this RTNL dependence, patch #7 converts the whole qdisc offload logic to a per-port mutex. - Patch #10 adds a selftest. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Apr 28, 2021
In bnxt_rx_pkt(), the RX buffers are expected to complete in order. If the RX consumer index indicates an out of order buffer completion, it means we are hitting a hardware bug and the driver will abort all remaining RX packets and reset the RX ring. The RX consumer index that we pass to bnxt_discard_rx() is not correct. We should be passing the current index (tmp_raw_cons) instead of the old index (raw_cons). This bug can cause us to be at the wrong index when trying to abort the next RX packet. It can crash like this: #0 [ffff9bbcdf5c39a8] machine_kexec at ffffffff9b05e007 #1 [ffff9bbcdf5c3a00] __crash_kexec at ffffffff9b111232 #2 [ffff9bbcdf5c3ad0] panic at ffffffff9b07d61e #3 [ffff9bbcdf5c3b50] oops_end at ffffffff9b030978 #4 [ffff9bbcdf5c3b78] no_context at ffffffff9b06aaf0 #5 [ffff9bbcdf5c3bd8] __bad_area_nosemaphore at ffffffff9b06ae2e #6 [ffff9bbcdf5c3c28] bad_area_nosemaphore at ffffffff9b06af24 #7 [ffff9bbcdf5c3c38] __do_page_fault at ffffffff9b06b67e #8 [ffff9bbcdf5c3cb0] do_page_fault at ffffffff9b06bb12 #9 [ffff9bbcdf5c3ce0] page_fault at ffffffff9bc015c5 [exception RIP: bnxt_rx_pkt+237] RIP: ffffffffc0259cdd RSP: ffff9bbcdf5c3d98 RFLAGS: 00010213 RAX: 000000005dd8097f RBX: ffff9ba4cb11b7e0 RCX: ffffa923cf6e9000 RDX: 0000000000000fff RSI: 0000000000000627 RDI: 0000000000001000 RBP: ffff9bbcdf5c3e60 R8: 0000000000420003 R9: 000000000000020d R10: ffffa923cf6ec138 R11: ffff9bbcdf5c3e83 R12: ffff9ba4d6f928c0 R13: ffff9ba4cac28080 R14: ffff9ba4cb11b7f0 R15: ffff9ba4d5a30000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 Fixes: a1b0e4e ("bnxt_en: Improve RX consumer index validity check.") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
kernel-patches-bot
pushed a commit
that referenced
this pull request
May 19, 2021
Ido Schimmel says: ==================== mlxsw: Various updates This patchset contains various updates to the mlxsw driver and related selftests. Patches #1-#5 contain various updates to mlxsw selftests. The most significant change is the conversion of the DCB selftests to use the new iproute2 DCB support. Patches #6-#9 contain mostly trivial changes to the driver itself. No user facing changes. Patches #10-#11 remove support for SwitchX-2 and SwitchIB ASICs that did not see any updates in the last 4-5 years and will not see any in the future. See individual commit messages for detailed explanation as to why it is OK to remove these drivers from the kernel. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Jun 3, 2021
…nect It's possible to trigger NULL pointer dereference by local unprivileged user, when calling getsockname() after failed bind() (e.g. the bind fails because LLCP_SAP_MAX used as SAP): BUG: kernel NULL pointer dereference, address: 0000000000000000 CPU: 1 PID: 426 Comm: llcp_sock_getna Not tainted 5.13.0-rc2-next-20210521+ #9 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1 04/01/2014 Call Trace: llcp_sock_getname+0xb1/0xe0 __sys_getpeername+0x95/0xc0 ? lockdep_hardirqs_on_prepare+0xd5/0x180 ? syscall_enter_from_user_mode+0x1c/0x40 __x64_sys_getpeername+0x11/0x20 do_syscall_64+0x36/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xae This can be reproduced with Syzkaller C repro (bind followed by getpeername): https://syzkaller.appspot.com/x/repro.c?x=14def446e00000 Cc: <stable@vger.kernel.org> Fixes: d646960 ("NFC: Initial LLCP support") Reported-by: syzbot+80fb126e7f7d8b1a5914@syzkaller.appspotmail.com Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210531072138.5219-1-krzysztof.kozlowski@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Jun 3, 2021
ASan reported a memory leak caused by info_linear not being
deallocated. The info_linear was allocated during
perf_event__synthesize_one_bpf_prog.
This patch adds the corresponding free() when bpf_prog_info_node
is freed in perf_env__purge_bpf.
$ sudo ./perf record -- sleep 5
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.025 MB perf.data (8 samples) ]
=================================================================
==297735==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 7688 byte(s) in 19 object(s) allocated from:
#0 0x4f420f in malloc (/home/user/linux/tools/perf/perf+0x4f420f)
#1 0xc06a74 in bpf_program__get_prog_info_linear /home/user/linux/tools/lib/bpf/libbpf.c:11113:16
#2 0xb426fe in perf_event__synthesize_one_bpf_prog /home/user/linux/tools/perf/util/bpf-event.c:191:16
#3 0xb42008 in perf_event__synthesize_bpf_events /home/user/linux/tools/perf/util/bpf-event.c:410:9
#4 0x594596 in record__synthesize /home/user/linux/tools/perf/builtin-record.c:1490:8
#5 0x58c9ac in __cmd_record /home/user/linux/tools/perf/builtin-record.c:1798:8
#6 0x58990b in cmd_record /home/user/linux/tools/perf/builtin-record.c:2901:8
#7 0x7b2a20 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
#8 0x7b12ff in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
#9 0x7b2583 in run_argv /home/user/linux/tools/perf/perf.c:409:2
#10 0x7b0d79 in main /home/user/linux/tools/perf/perf.c:539:3
#11 0x7fa357ef6b74 in __libc_start_main /usr/src/debug/glibc-2.33-8.fc34.x86_64/csu/../csu/libc-start.c:332:16
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Jun 3, 2021
ASan reported a memory leak caused by info_linear not being
deallocated. The info_linear was allocated during
perf_event__synthesize_one_bpf_prog.
This patch adds the corresponding free() when bpf_prog_info_node
is freed in perf_env__purge_bpf.
$ sudo ./perf record -- sleep 5
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.025 MB perf.data (8 samples) ]
=================================================================
==297735==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 7688 byte(s) in 19 object(s) allocated from:
#0 0x4f420f in malloc (/home/user/linux/tools/perf/perf+0x4f420f)
#1 0xc06a74 in bpf_program__get_prog_info_linear /home/user/linux/tools/lib/bpf/libbpf.c:11113:16
#2 0xb426fe in perf_event__synthesize_one_bpf_prog /home/user/linux/tools/perf/util/bpf-event.c:191:16
#3 0xb42008 in perf_event__synthesize_bpf_events /home/user/linux/tools/perf/util/bpf-event.c:410:9
#4 0x594596 in record__synthesize /home/user/linux/tools/perf/builtin-record.c:1490:8
#5 0x58c9ac in __cmd_record /home/user/linux/tools/perf/builtin-record.c:1798:8
#6 0x58990b in cmd_record /home/user/linux/tools/perf/builtin-record.c:2901:8
#7 0x7b2a20 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
#8 0x7b12ff in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
#9 0x7b2583 in run_argv /home/user/linux/tools/perf/perf.c:409:2
#10 0x7b0d79 in main /home/user/linux/tools/perf/perf.c:539:3
#11 0x7fa357ef6b74 in __libc_start_main /usr/src/debug/glibc-2.33-8.fc34.x86_64/csu/../csu/libc-start.c:332:16
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Jun 23, 2021
ASan reported a memory leak caused by info_linear not being deallocated.
The info_linear was allocated during in perf_event__synthesize_one_bpf_prog().
This patch adds the corresponding free() when bpf_prog_info_node
is freed in perf_env__purge_bpf().
$ sudo ./perf record -- sleep 5
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.025 MB perf.data (8 samples) ]
=================================================================
==297735==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 7688 byte(s) in 19 object(s) allocated from:
#0 0x4f420f in malloc (/home/user/linux/tools/perf/perf+0x4f420f)
#1 0xc06a74 in bpf_program__get_prog_info_linear /home/user/linux/tools/lib/bpf/libbpf.c:11113:16
#2 0xb426fe in perf_event__synthesize_one_bpf_prog /home/user/linux/tools/perf/util/bpf-event.c:191:16
#3 0xb42008 in perf_event__synthesize_bpf_events /home/user/linux/tools/perf/util/bpf-event.c:410:9
#4 0x594596 in record__synthesize /home/user/linux/tools/perf/builtin-record.c:1490:8
#5 0x58c9ac in __cmd_record /home/user/linux/tools/perf/builtin-record.c:1798:8
#6 0x58990b in cmd_record /home/user/linux/tools/perf/builtin-record.c:2901:8
#7 0x7b2a20 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
#8 0x7b12ff in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
#9 0x7b2583 in run_argv /home/user/linux/tools/perf/perf.c:409:2
#10 0x7b0d79 in main /home/user/linux/tools/perf/perf.c:539:3
#11 0x7fa357ef6b74 in __libc_start_main /usr/src/debug/glibc-2.33-8.fc34.x86_64/csu/../csu/libc-start.c:332:16
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Link: http://lore.kernel.org/lkml/20210602224024.300485-1-rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Jul 16, 2021
ASan reports a memory leak caused by evlist not being deleted on exit in perf-report, perf-script and perf-data. The problem is caused by evlist->session not being deleted, which is allocated in perf_session__read_header, called in perf_session__new if perf_data is in read mode. In case of write mode, the session->evlist is filled by the caller. This patch solves the problem by calling evlist__delete in perf_session__delete if perf_data is in read mode. Changes in v2: - call evlist__delete from within perf_session__delete v1: https://lore.kernel.org/lkml/20210621234317.235545-1-rickyman7@gmail.com/ ASan report follows: $ ./perf script report flamegraph ================================================================= ==227640==ERROR: LeakSanitizer: detected memory leaks <SNIP unrelated> Indirect leak of 2704 byte(s) in 1 object(s) allocated from: #0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137) #1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9 #2 0x7f999e in evlist__new /home/user/linux/tools/perf/util/evlist.c:77:26 #3 0x8ad938 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3797:20 #4 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6 #5 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10 #6 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12 #7 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11 #8 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8 #9 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2 #10 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3 #11 0x7f5260654b74 (/lib64/libc.so.6+0x27b74) Indirect leak of 568 byte(s) in 1 object(s) allocated from: #0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137) #1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9 #2 0x80ce88 in evsel__new_idx /home/user/linux/tools/perf/util/evsel.c:268:24 #3 0x8aed93 in evsel__new /home/user/linux/tools/perf/util/evsel.h:210:9 #4 0x8ae07e in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3853:11 #5 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6 #6 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10 #7 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12 #8 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11 #9 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8 #10 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2 #11 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3 #12 0x7f5260654b74 (/lib64/libc.so.6+0x27b74) Indirect leak of 264 byte(s) in 1 object(s) allocated from: #0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137) #1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9 #2 0xbe3e70 in xyarray__new /home/user/linux/tools/lib/perf/xyarray.c:10:23 #3 0xbd7754 in perf_evsel__alloc_id /home/user/linux/tools/lib/perf/evsel.c:361:21 #4 0x8ae201 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3871:7 #5 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6 #6 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10 #7 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12 #8 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11 #9 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8 #10 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2 #11 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3 #12 0x7f5260654b74 (/lib64/libc.so.6+0x27b74) Indirect leak of 32 byte(s) in 1 object(s) allocated from: #0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137) #1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9 #2 0xbd77e0 in perf_evsel__alloc_id /home/user/linux/tools/lib/perf/evsel.c:365:14 #3 0x8ae201 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3871:7 #4 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6 #5 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10 #6 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12 #7 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11 #8 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8 #9 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2 #10 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3 #11 0x7f5260654b74 (/lib64/libc.so.6+0x27b74) Indirect leak of 7 byte(s) in 1 object(s) allocated from: #0 0x4b8207 in strdup (/home/user/linux/tools/perf/perf+0x4b8207) #1 0x8b4459 in evlist__set_event_name /home/user/linux/tools/perf/util/header.c:2292:16 #2 0x89d862 in process_event_desc /home/user/linux/tools/perf/util/header.c:2313:3 #3 0x8af319 in perf_file_section__process /home/user/linux/tools/perf/util/header.c:3651:9 #4 0x8aa6e9 in perf_header__process_sections /home/user/linux/tools/perf/util/header.c:3427:9 #5 0x8ae3e7 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3886:2 #6 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6 #7 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10 #8 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12 #9 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11 #10 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8 #11 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2 #12 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3 #13 0x7f5260654b74 (/lib64/libc.so.6+0x27b74) SUMMARY: AddressSanitizer: 3728 byte(s) leaked in 7 allocation(s). Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Acked-by: Ian Rogers <irogers@google.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210624231926.212208-1-rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Jul 16, 2021
ASan reports a heap-buffer-overflow in elf_sec__is_text when using perf-top.
The bug is caused by the fact that secstrs is built from runtime_ss, while
shdr is built from syms_ss if shdr.sh_type != SHT_NOBITS. Therefore, they
point to two different ELF files.
This patch renames secstrs to secstrs_run and adds secstrs_sym, so that
the correct secstrs is chosen depending on shdr.sh_type.
$ ASAN_OPTIONS=abort_on_error=1:disable_coredump=0:unmap_shadow_on_exit=1 ./perf top
=================================================================
==363148==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x61300009add6 at pc 0x00000049875c bp 0x7f4f56446440 sp 0x7f4f56445bf0
READ of size 1 at 0x61300009add6 thread T6
#0 0x49875b in StrstrCheck(void*, char*, char const*, char const*) (/home/user/linux/tools/perf/perf+0x49875b)
#1 0x4d13a2 in strstr (/home/user/linux/tools/perf/perf+0x4d13a2)
#2 0xacae36 in elf_sec__is_text /home/user/linux/tools/perf/util/symbol-elf.c:176:9
#3 0xac3ec9 in elf_sec__filter /home/user/linux/tools/perf/util/symbol-elf.c:187:9
#4 0xac2c3d in dso__load_sym /home/user/linux/tools/perf/util/symbol-elf.c:1254:20
#5 0x883981 in dso__load /home/user/linux/tools/perf/util/symbol.c:1897:9
#6 0x8e6248 in map__load /home/user/linux/tools/perf/util/map.c:332:7
#7 0x8e66e5 in map__find_symbol /home/user/linux/tools/perf/util/map.c:366:6
#8 0x7f8278 in machine__resolve /home/user/linux/tools/perf/util/event.c:707:13
#9 0x5f3d1a in perf_event__process_sample /home/user/linux/tools/perf/builtin-top.c:773:6
#10 0x5f30e4 in deliver_event /home/user/linux/tools/perf/builtin-top.c:1197:3
#11 0x908a72 in do_flush /home/user/linux/tools/perf/util/ordered-events.c:244:9
#12 0x905fae in __ordered_events__flush /home/user/linux/tools/perf/util/ordered-events.c:323:8
#13 0x9058db in ordered_events__flush /home/user/linux/tools/perf/util/ordered-events.c:341:9
#14 0x5f19b1 in process_thread /home/user/linux/tools/perf/builtin-top.c:1109:7
#15 0x7f4f6a21a298 in start_thread /usr/src/debug/glibc-2.33-16.fc34.x86_64/nptl/pthread_create.c:481:8
#16 0x7f4f697d0352 in clone ../sysdeps/unix/sysv/linux/x86_64/clone.S:95
0x61300009add6 is located 10 bytes to the right of 332-byte region [0x61300009ac80,0x61300009adcc)
allocated by thread T6 here:
#0 0x4f3f7f in malloc (/home/user/linux/tools/perf/perf+0x4f3f7f)
#1 0x7f4f6a0a88d9 (/lib64/libelf.so.1+0xa8d9)
Thread T6 created by T0 here:
#0 0x464856 in pthread_create (/home/user/linux/tools/perf/perf+0x464856)
#1 0x5f06e0 in __cmd_top /home/user/linux/tools/perf/builtin-top.c:1309:6
#2 0x5ef19f in cmd_top /home/user/linux/tools/perf/builtin-top.c:1762:11
#3 0x7b28c0 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
#4 0x7b119f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
#5 0x7b2423 in run_argv /home/user/linux/tools/perf/perf.c:409:2
#6 0x7b0c19 in main /home/user/linux/tools/perf/perf.c:539:3
#7 0x7f4f696f7b74 in __libc_start_main /usr/src/debug/glibc-2.33-16.fc34.x86_64/csu/../csu/libc-start.c:332:16
SUMMARY: AddressSanitizer: heap-buffer-overflow (/home/user/linux/tools/perf/perf+0x49875b) in StrstrCheck(void*, char*, char const*, char const*)
Shadow bytes around the buggy address:
0x0c268000b560: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c268000b570: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c268000b580: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c268000b590: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c268000b5a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
=>0x0c268000b5b0: 00 00 00 00 00 00 00 00 00 04[fa]fa fa fa fa fa
0x0c268000b5c0: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
0x0c268000b5d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c268000b5e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c268000b5f0: 07 fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c268000b600: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap left redzone: fa
Freed heap region: fd
Stack left redzone: f1
Stack mid redzone: f2
Stack right redzone: f3
Stack after return: f5
Stack use after scope: f8
Global redzone: f9
Global init order: f6
Poisoned by user: f7
Container overflow: fc
Array cookie: ac
Intra object redzone: bb
ASan internal: fe
Left alloca redzone: ca
Right alloca redzone: cb
Shadow gap: cc
==363148==ABORTING
Suggested-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Fabian Hemmer <copy@copy.sh>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Remi Bernon <rbernon@codeweavers.com>
Link: http://lore.kernel.org/lkml/20210621222108.196219-1-rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Aug 1, 2021
Loading and then unloading module g_dpgp on a VM that does not support the driver currently throws a WARN_ON message because the port has not been initialized. Removing an unused driver is a valid use-case and the WARN_ON kernel warning is a bit excessive, so remove it. Cleans up: [27654.638698] ------------[ cut here ]------------ [27654.638705] WARNING: CPU: 6 PID: 2956336 at drivers/usb/gadget/function/u_serial.c:1201 gserial_free_line+0x7c/0x90 [u_serial] [27654.638728] Modules linked in: g_dbgp(-) u_serial usb_f_tcm target_core_mod libcomposite udc_core vmw_vmci mcb i2c_nforce2 i2c_amd756 nfit cx8800 videobuf2_dma_sg videobuf2_memops videobuf2_v4l2 cx88xx tveeprom videobuf2_common videodev mc ccp hid_generic hid intel_ishtp cros_ec mc13xxx_core vfio_mdev mdev i915 i2c_algo_bit kvm ppdev parport zatm eni suni uPD98402 atm rio_scan binder_linux hwmon_vid video ipmi_devintf ipmi_msghandler zstd nls_utf8 decnet qrtr ns sctp ip6_udp_tunnel udp_tunnel fcrypt pcbc nhc_udp nhc_ipv6 nhc_routing nhc_mobility nhc_hop nhc_dest nhc_fragment 6lowpan ts_kmp dccp_ipv6 dccp_ipv4 dccp snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq_dummy snd_seq snd_seq_device xen_front_pgdir_shbuf binfmt_misc nls_iso8859_1 dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua intel_rapl_msr intel_rapl_common snd_hda_codec_generic ledtrig_audio snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd rapl soundcore joydev input_leds mac_hid serio_raw efi_pstore [27654.638880] qemu_fw_cfg sch_fq_codel msr virtio_rng autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear qxl drm_ttm_helper crct10dif_pclmul ttm drm_kms_helper syscopyarea sysfillrect sysimgblt virtio_net fb_sys_fops cec net_failover rc_core ahci psmouse drm libahci lpc_ich virtio_blk failover [last unloaded: u_ether] [27654.638949] CPU: 6 PID: 2956336 Comm: modprobe Tainted: P O 5.13.0-9-generic #9 [27654.638956] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 [27654.638969] RIP: 0010:gserial_free_line+0x7c/0x90 [u_serial] [27654.638981] Code: 20 00 00 00 00 e8 74 1a ba c9 4c 89 e7 e8 8c fe ff ff 48 8b 3d 75 3b 00 00 44 89 f6 e8 3d 7c 69 c9 5b 41 5c 41 5d 41 5e 5d c3 <0f> 0b 4c 89 ef e8 4a 1a ba c9 5b 41 5c 41 5d 41 5e 5d c3 90 0f 1f [27654.638986] RSP: 0018:ffffba0b81403da0 EFLAGS: 00010246 [27654.638992] RAX: 0000000000000000 RBX: ffffffffc0eaf6a0 RCX: 0000000000000000 [27654.638996] RDX: ffff8e21c0cac8c0 RSI: 0000000000000006 RDI: ffffffffc0eaf6a0 [27654.639000] RBP: ffffba0b81403dc0 R08: ffffba0b81403de0 R09: fefefefefefefeff [27654.639003] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [27654.639006] R13: ffffffffc0eaf6a0 R14: 0000000000000000 R15: 0000000000000000 [27654.639010] FS: 00007faa1935e740(0000) GS:ffff8e223bd80000(0000) knlGS:0000000000000000 [27654.639015] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [27654.639019] CR2: 00007ffc840cd4e8 CR3: 000000000e1ac006 CR4: 0000000000370ee0 [27654.639028] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [27654.639031] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [27654.639035] Call Trace: [27654.639044] dbgp_exit+0x1c/0xa1a [g_dbgp] [27654.639054] __do_sys_delete_module.constprop.0+0x144/0x260 [27654.639066] ? call_rcu+0xe/0x10 [27654.639073] __x64_sys_delete_module+0x12/0x20 [27654.639081] do_syscall_64+0x61/0xb0 [27654.639092] ? exit_to_user_mode_loop+0xec/0x160 [27654.639098] ? exit_to_user_mode_prepare+0x37/0xb0 [27654.639104] ? syscall_exit_to_user_mode+0x27/0x50 [27654.639110] ? __x64_sys_close+0x12/0x40 [27654.639119] ? do_syscall_64+0x6e/0xb0 [27654.639126] ? exit_to_user_mode_prepare+0x37/0xb0 [27654.639132] ? syscall_exit_to_user_mode+0x27/0x50 [27654.639137] ? __x64_sys_newfstatat+0x1e/0x20 [27654.639146] ? do_syscall_64+0x6e/0xb0 [27654.639154] ? exc_page_fault+0x8f/0x170 [27654.639159] ? asm_exc_page_fault+0x8/0x30 [27654.639166] entry_SYSCALL_64_after_hwframe+0x44/0xae [27654.639173] RIP: 0033:0x7faa194a4b2b [27654.639179] Code: 73 01 c3 48 8b 0d 3d 73 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 0d 73 0c 00 f7 d8 64 89 01 48 [27654.639185] RSP: 002b:00007ffc840d0578 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [27654.639191] RAX: ffffffffffffffda RBX: 000056060f9f4e70 RCX: 00007faa194a4b2b [27654.639194] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000056060f9f4ed8 [27654.639197] RBP: 000056060f9f4e70 R08: 0000000000000000 R09: 0000000000000000 [27654.639200] R10: 00007faa1951eac0 R11: 0000000000000206 R12: 000056060f9f4ed8 [27654.639203] R13: 0000000000000000 R14: 000056060f9f4ed8 R15: 00007ffc840d06c8 [27654.639219] ---[ end trace 8dd0ea0bb32ce94a ]--- Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210701144305.110078-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Aug 9, 2021
Enabling the framebuffer leads to a system hang. Running, as a debug hack, the store_pan() function in drivers/video/fbdev/core/fbsysfs.c without taking the console_lock, allows to see the crash backtrace on the serial line. ~ # echo 0 0 > /sys/class/graphics/fb0/pan [ 9.719414] Unhandled exception: IPSR = 00000005 LR = fffffff1 [ 9.726937] CPU: 0 PID: 49 Comm: sh Not tainted 5.13.0-rc5 #9 [ 9.733008] Hardware name: STM32 (Device Tree Support) [ 9.738296] PC is at clk_gate_is_enabled+0x0/0x28 [ 9.743426] LR is at stm32f4_pll_div_set_rate+0xf/0x38 [ 9.748857] pc : [<0011e4be>] lr : [<0011f9e3>] psr: 0100000b [ 9.755373] sp : 00bc7be0 ip : 00000000 fp : 001f3ac4 [ 9.760812] r10: 002610d0 r9 : 01efe920 r8 : 00540560 [ 9.766269] r7 : 02e7ddb0 r6 : 0173eed8 r5 : 00000000 r4 : 004027c0 [ 9.773081] r3 : 0011e4bf r2 : 02e7ddb0 r1 : 0173eed8 r0 : 1d3267b8 [ 9.779911] xPSR: 0100000b [ 9.782719] CPU: 0 PID: 49 Comm: sh Not tainted 5.13.0-rc5 #9 [ 9.788791] Hardware name: STM32 (Device Tree Support) [ 9.794120] [<0000afa1>] (unwind_backtrace) from [<0000a33f>] (show_stack+0xb/0xc) [ 9.802421] [<0000a33f>] (show_stack) from [<0000a8df>] (__invalid_entry+0x4b/0x4c) The `pll_num' field in the post_div_data configuration contained a wrong value which also referenced an uninitialized hardware clock when clk_register_pll_div() was called. Fixes: 517633e ("clk: stm32f4: Add post divisor for I2S & SAI PLLs") Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Gabriel Fernandez <gabriel.fernandez@st.com> Link: https://lore.kernel.org/r/20210725160725.10788-1-dariobin@libero.it Signed-off-by: Stephen Boyd <sboyd@kernel.org>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Sep 17, 2021
Ido Schimmel says: ==================== mlxsw: Add support for transceiver modules reset This patchset prepares mlxsw for future transceiver modules related [1] changes and adds reset support via the existing 'ETHTOOL_RESET' interface. Patches #1-#6 are relatively straightforward preparations. Patch #7 tracks the number of logical ports that are mapped to the transceiver module and the number of logical ports using it that are administratively up. Needed for both reset support and power mode policy support. Patches #8-#9 add required fields in device registers. Patch #10 implements support for ethtool_ops::reset in order to reset transceiver modules. [1] https://lore.kernel.org/netdev/20210824130344.1828076-1-idosch@idosch.org/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Sep 28, 2021
It's later supposed to be either a correct address or NULL. Without the initialization, it may contain an undefined value which results in the following segmentation fault: # perf top --sort comm -g --ignore-callees=do_idle terminates with: #0 0x00007ffff56b7685 in __strlen_avx2 () from /lib64/libc.so.6 #1 0x00007ffff55e3802 in strdup () from /lib64/libc.so.6 #2 0x00005555558cb139 in hist_entry__init (callchain_size=<optimized out>, sample_self=true, template=0x7fffde7fb110, he=0x7fffd801c250) at util/hist.c:489 #3 hist_entry__new (template=template@entry=0x7fffde7fb110, sample_self=sample_self@entry=true) at util/hist.c:564 #4 0x00005555558cb4ba in hists__findnew_entry (hists=hists@entry=0x5555561d9e38, entry=entry@entry=0x7fffde7fb110, al=al@entry=0x7fffde7fb420, sample_self=sample_self@entry=true) at util/hist.c:657 #5 0x00005555558cba1b in __hists__add_entry (hists=hists@entry=0x5555561d9e38, al=0x7fffde7fb420, sym_parent=<optimized out>, bi=bi@entry=0x0, mi=mi@entry=0x0, sample=sample@entry=0x7fffde7fb4b0, sample_self=true, ops=0x0, block_info=0x0) at util/hist.c:288 #6 0x00005555558cbb70 in hists__add_entry (sample_self=true, sample=0x7fffde7fb4b0, mi=0x0, bi=0x0, sym_parent=<optimized out>, al=<optimized out>, hists=0x5555561d9e38) at util/hist.c:1056 #7 iter_add_single_cumulative_entry (iter=0x7fffde7fb460, al=<optimized out>) at util/hist.c:1056 #8 0x00005555558cc8a4 in hist_entry_iter__add (iter=iter@entry=0x7fffde7fb460, al=al@entry=0x7fffde7fb420, max_stack_depth=<optimized out>, arg=arg@entry=0x7fffffff7db0) at util/hist.c:1231 #9 0x00005555557cdc9a in perf_event__process_sample (machine=<optimized out>, sample=0x7fffde7fb4b0, evsel=<optimized out>, event=<optimized out>, tool=0x7fffffff7db0) at builtin-top.c:842 #10 deliver_event (qe=<optimized out>, qevent=<optimized out>) at builtin-top.c:1202 #11 0x00005555558a9318 in do_flush (show_progress=false, oe=0x7fffffff80e0) at util/ordered-events.c:244 #12 __ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP, timestamp=timestamp@entry=0) at util/ordered-events.c:323 #13 0x00005555558a9789 in __ordered_events__flush (timestamp=<optimized out>, how=<optimized out>, oe=<optimized out>) at util/ordered-events.c:339 #14 ordered_events__flush (how=OE_FLUSH__TOP, oe=0x7fffffff80e0) at util/ordered-events.c:341 #15 ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP) at util/ordered-events.c:339 #16 0x00005555557cd631 in process_thread (arg=0x7fffffff7db0) at builtin-top.c:1114 #17 0x00007ffff7bb817a in start_thread () from /lib64/libpthread.so.0 #18 0x00007ffff5656dc3 in clone () from /lib64/libc.so.6 If you look at the frame #2, the code is: 488 if (he->srcline) { 489 he->srcline = strdup(he->srcline); 490 if (he->srcline == NULL) 491 goto err_rawdata; 492 } If he->srcline is not NULL (it is not NULL if it is uninitialized rubbish), it gets strdupped and strdupping a rubbish random string causes the problem. Also, if you look at the commit 1fb7d06, it adds the srcline property into the struct, but not initializing it everywhere needed. Committer notes: Now I see, when using --ignore-callees=do_idle we end up here at line 2189 in add_callchain_ip(): 2181 if (al.sym != NULL) { 2182 if (perf_hpp_list.parent && !*parent && 2183 symbol__match_regex(al.sym, &parent_regex)) 2184 *parent = al.sym; 2185 else if (have_ignore_callees && root_al && 2186 symbol__match_regex(al.sym, &ignore_callees_regex)) { 2187 /* Treat this symbol as the root, 2188 forgetting its callees. */ 2189 *root_al = al; 2190 callchain_cursor_reset(cursor); 2191 } 2192 } And the al that doesn't have the ->srcline field initialized will be copied to the root_al, so then, back to: 1211 int hist_entry_iter__add(struct hist_entry_iter *iter, struct addr_location *al, 1212 int max_stack_depth, void *arg) 1213 { 1214 int err, err2; 1215 struct map *alm = NULL; 1216 1217 if (al) 1218 alm = map__get(al->map); 1219 1220 err = sample__resolve_callchain(iter->sample, &callchain_cursor, &iter->parent, 1221 iter->evsel, al, max_stack_depth); 1222 if (err) { 1223 map__put(alm); 1224 return err; 1225 } 1226 1227 err = iter->ops->prepare_entry(iter, al); 1228 if (err) 1229 goto out; 1230 1231 err = iter->ops->add_single_entry(iter, al); 1232 if (err) 1233 goto out; 1234 That al at line 1221 is what hist_entry_iter__add() (called from sample__resolve_callchain()) saw as 'root_al', and then: iter->ops->add_single_entry(iter, al); will go on with al->srcline with a bogus value, I'll add the above sequence to the cset and apply, thanks! Signed-off-by: Michael Petlan <mpetlan@redhat.com> CC: Milian Wolff <milian.wolff@kdab.com> Cc: Jiri Olsa <jolsa@redhat.com> Fixes: 1fb7d06 ("perf report Use srcline from callchain for hist entries") Link: https //lore.kernel.org/r/20210719145332.29747-1-mpetlan@redhat.com Reported-by: Juri Lelli <jlelli@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Sep 28, 2021
FD uses xyarray__entry that may return NULL if an index is out of
bounds. If NULL is returned then a segv happens as FD unconditionally
dereferences the pointer. This was happening in a case of with perf
iostat as shown below. The fix is to make FD an "int*" rather than an
int and handle the NULL case as either invalid input or a closed fd.
$ sudo gdb --args perf stat --iostat list
...
Breakpoint 1, perf_evsel__alloc_fd (evsel=0x5555560951a0, ncpus=1, nthreads=1) at evsel.c:50
50 {
(gdb) bt
#0 perf_evsel__alloc_fd (evsel=0x5555560951a0, ncpus=1, nthreads=1) at evsel.c:50
#1 0x000055555585c188 in evsel__open_cpu (evsel=0x5555560951a0, cpus=0x555556093410,
threads=0x555556086fb0, start_cpu=0, end_cpu=1) at util/evsel.c:1792
#2 0x000055555585cfb2 in evsel__open (evsel=0x5555560951a0, cpus=0x0, threads=0x555556086fb0)
at util/evsel.c:2045
#3 0x000055555585d0db in evsel__open_per_thread (evsel=0x5555560951a0, threads=0x555556086fb0)
at util/evsel.c:2065
#4 0x00005555558ece64 in create_perf_stat_counter (evsel=0x5555560951a0,
config=0x555555c34700 <stat_config>, target=0x555555c2f1c0 <target>, cpu=0) at util/stat.c:590
#5 0x000055555578e927 in __run_perf_stat (argc=1, argv=0x7fffffffe4a0, run_idx=0)
at builtin-stat.c:833
#6 0x000055555578f3c6 in run_perf_stat (argc=1, argv=0x7fffffffe4a0, run_idx=0)
at builtin-stat.c:1048
#7 0x0000555555792ee5 in cmd_stat (argc=1, argv=0x7fffffffe4a0) at builtin-stat.c:2534
#8 0x0000555555835ed3 in run_builtin (p=0x555555c3f540 <commands+288>, argc=3,
argv=0x7fffffffe4a0) at perf.c:313
#9 0x0000555555836154 in handle_internal_command (argc=3, argv=0x7fffffffe4a0) at perf.c:365
#10 0x000055555583629f in run_argv (argcp=0x7fffffffe2ec, argv=0x7fffffffe2e0) at perf.c:409
#11 0x0000555555836692 in main (argc=3, argv=0x7fffffffe4a0) at perf.c:539
...
(gdb) c
Continuing.
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (uncore_iio_0/event=0x83,umask=0x04,ch_mask=0xF,fc_mask=0x07/).
/bin/dmesg | grep -i perf may provide additional information.
Program received signal SIGSEGV, Segmentation fault.
0x00005555559b03ea in perf_evsel__close_fd_cpu (evsel=0x5555560951a0, cpu=1) at evsel.c:166
166 if (FD(evsel, cpu, thread) >= 0)
v3. fixes a bug in perf_evsel__run_ioctl where the sense of a branch was
backward.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210918054440.2350466-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Sep 28, 2021
Andrii Nakryiko says: ==================== Implement opt-in stricter BPF program section name (SEC()) handling logic. For a lot of supported ELF section names, enforce exact section name match with no arbitrary characters added at the end. See patch #9 for more details. To allow this, patches #2 through #4 clean up and preventively fix selftests, normalizing existing SEC() usage across multiple selftests. While at it, those patches also reduce the amount of remaining bpf_object__find_program_by_title() uses, which should be completely removed soon, given it's an API with ambiguous semantics and will be deprecated and eventually removed in libbpf 1.0. Patch #1 also introduces SEC("tc") as an alias for SEC("classifier"). "tc" is a better and less misleading name, so patch #3 replaces all classifier* uses with nice and short SEC("tc"). Last patch is also fixing "sk_lookup/" definition to not require and not allow extra "/blah" parts after it, which serve no meaning. All the other patches are gradual internal libbpf changes to: - allow this optional strict logic for ELF section name handling; - allow new use case (for now for "struct_ops", but that could be extended to, say, freplace definitions), in which it can be used stand-alone to specify just type (SEC("struct_ops")), or also accept extra parameters which can be utilized by libbpf to either get more data or double-check valid use (e.g., SEC("struct_ops/dctcp_init") to specify desired struct_ops operation that is supposed to be implemented); - get libbpf's internal logic ready to allow other libraries and applications to specify their custom handlers for ELF section name for BPF programs. All the pieces are in place, the only thing preventing making this as public libbpf API is reliance on internal type for specifying BPF program load attributes. The work is planned to revamp related low-level libbpf APIs, at which point it will be possible to just re-use such new types for coordination between libbpf and custom handlers. These changes are a part of libbpf 1.0 effort ([0]). They are also intended to be applied on top of the previous preparatory series [1], so currently CI will be failing to apply them to bpf-next until that patch set is landed. Once it is landed, kernel-patches daemon will automatically retest this patch set. [0] https://github.com/libbpf/libbpf/wiki/Libbpf:-the-road-to-v1.0#stricter-and-more-uniform-bpf-program-section-name-sec-handling [1] https://patchwork.kernel.org/project/netdevbpf/list/?series=547675&state=* v3->v4: - replace SEC("classifier*") with SEC("tc") (Daniel); v2->v3: - applied acks, addressed most feedback, added comments to new flags (Dave); v1->v2: - rebase onto latest bpf-next and resolve merge conflicts w/ Dave's changes. ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Oct 4, 2021
Ido Schimmel says: ==================== mlxsw: Add support for IP-in-IP with IPv6 underlay Currently, mlxsw only supports IP-in-IP with IPv4 underlay. Traffic routed through 'gre' netdevs is encapsulated with IPv4 and GRE headers. Similarly, incoming IPv4 GRE packets are decapsulated and routed in the overlay VRF (which can be the same as the underlay VRF). This patchset adds support for IPv6 underlay using the 'ip6gre' netdev. Due to architectural differences between Spectrum-1 and later ASICs, this functionality is only supported on Spectrum-2 onwards (the software data path is used for Spectrum-1). Patchset overview: Patches #1-#5 are preparations. Patches #6-#9 add and extend required device registers. Patches #10-#14 gradually add IPv6 underlay support. A follow-up patchset will add net/forwarding/ selftests. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
3 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Pull request for series with
subject: bpf: permit map_ptr arithmetic with opcode add and offset 0
version: 1
url: https://patchwork.ozlabs.org/project/netdev/list/?series=199627