About Steinel Connect
Note: Not all Steinel products are currently compatible with this app. In this case, please use the Steinel SmartRemote app first. You can update your product soon via the SmartRemote app so that you can use it with the...
Note: Not all Steinel products are currently compatible with this app. In this case, please use the Steinel SmartRemote app first.
You can update your product soon via the SmartRemote app so that you can use it with the Steinel Connect app.
Innovative products and solutions are the most important mission for us at Steinel. Our Bluetooth-enabled luminaires and sensors can be networked with each other without any cables, put into operation and conveniently operated via app. All you need is the new Steinel Connect app. You can easily control your lighting in no time at all.
Special luminaire functions such as basic light, dimming of the main light, sensor run-on time or twilight switching threshold can be set directly in the app. Creating a luminaire group and configuring the individual group members is also done in just a few clicks with the Steinel Connect app. A step-by-step procedure and help functions make using the app easy. All settings can be changed at any time and adapted to new conditions and requirements.
Very important: All information is stored locally on your smartphone or tablet and is only shared with other devices if necessary or if you use the Cloudservice. This makes the system particularly secure.
Steinel Connect App - Intelligent light can be so simple.
In the “Small Objects” view, a convenient configuration wizard is now available!
It guides you step by step through the setup process and helps you configure your lighting exactly the way you want.
By answering just a few questions, you can define the logic for how the light should turn on and off.
Previous Versions
Here you can find the changelog of Steinel Connect since it was posted on our website on 2023-09-07 09:01:52.
The latest version is 3.0.81 and it was updated on 2026-06-12 10:35:11. See below the changes in each version.
Steinel Connect version 3.0.81
Updated At: 2025-10-30
Changes: In the “Small Objects” view, a convenient configuration wizard is now available!
It guides you step by step through the setup process and helps you configure your lighting exactly the way you want.
By answering just a few questions, you can define the logic for how the light should turn on and off.
Steinel Connect version 3.0.59
Updated At: 2025-09-12
Changes: Sep 12, 2025
Version 3.0.59
The app update introduces a new DIY interface – intuitive, user-friendly, and ideal for smaller setups.
Smart lighting is now fit for everyday use!
The familiar interface is still available – find more info in the app.
Steinel Connect version 3.0.49
Updated At: 2025-08-14
Changes: Aug 14, 2025
Version 3.0.49
The app update introduces a new DIY interface – intuitive, user-friendly, and ideal for smaller setups.
Smart lighting is now fit for everyday use!
The familiar interface is still available – find more info in the app.
Steinel Connect version 2.9.18
Updated At: 2025-01-22
Changes: Jan 22, 2025
Version 2.9.18
- Optimizations / New:
- New Products:
- Outdoor sensor series: MD IR N130, MD IR N270, MD IR N360 – COM1 & uDIM
- RS PRO 5100 HFD
- Firmware Updates: Products already running the latest firmware version are now also displayed in the update list with an appropriate note.
- Network Editing: When starting to edit a network, the view of that network is opened automatically.
- More Robust Provisioning: Improved stability when provisioning multiple devices simultaneously.
- Bugfixes:
- Timing Issues: Resolved errors related to resetting devices to factory settings.
- Message Queue: Fixed an issue where unnecessary messages were sent when removing products from groups.
- Progress Display: In rare cases, the progress bar would remain at 100% despite a successful firmware update. This bug has been fixed.
Steinel Connect version 2.8.55
Updated At: 2025-01-06
Changes: Jan 6, 2025
Version 2.8.55
Due to a bug, products were lost in rare cases after the editing of a network was finished. This bug has now been fixed.
Steinel Connect version 2.8.54
Updated At: 2024-12-03
Changes: Dec 3, 2024
Version 2.8.54
Optimized firmware update
Steinel Connect version 2.8.49
Updated At: 2024-09-23
Changes: Sep 23, 2024
Version 2.8.49
Optimizations / New Features:
◦ New Feature: Configuration of empty groups
▪ Empty groups can now be configured in advance. This allows the project to be set up with all groups and their respective settings beforehand. Later, individual products can be added to the respective groups.
◦ New Feature: Mass modification
▪ By long pressing and holding, multiple groups within a network can now be selected and edited simultaneously. The following parameters can be adjusted:
• Motion Sensor (Sensitivity)
• Brightness Value
• Main Light Dimming Level & Run-on Time
• Base Light Dimming Level & Run-on Time
◦ New Feature: Default templates
▪ In the network settings, the default profiles "Fully-Automatic", "Semi-Automatic", "Nightmatic", and "Switch Mode" can now be adjusted for the entire network. Every product and group added to the network after the adjustment of the default templates will now be set up with the new values.
◦ New Feature: Network sensor
▪ Light sensors of individual products can now be shared across the entire network and used across groups.
◦ New Feature: Move networks
▪ Networks can now be moved from one project to another. The user must be an "Administrator" in both projects.
◦ New Feature: Profile call via pushbutton
▪ When assigning button functions, profiles can now also be saved.
◦ New Feature: Save dimming value fixed/dynamic
▪ This feature determines whether a manually set dimming value via button should subsequently be permanently saved as the new setpoint or whether the product should revert to the old setpoint when switched on.
◦ Optimization: Networks can now be saved locally at any time, even if an upload to the cloud is currently not possible.
Steinel Connect version 2.8.35
Updated At: 2024-06-26
Changes: Jun 26, 2024
Version 2.8.35
Optimizations / New Features:
◦ New Feature: Configuration of empty groups
▪ Empty groups can now be configured in advance. This allows the project to be set up with all groups and their respective settings beforehand. Later, individual products can be added to the respective groups.
◦ New Feature: Mass modification
▪ By long pressing and holding, multiple groups within a network can now be selected and edited simultaneously. The following parameters can be adjusted:
• Motion Sensor (Sensitivity)
• Brightness Value
• Main Light Dimming Level & Run-on Time
• Base Light Dimming Level & Run-on Time
◦ New Feature: Default templates
▪ In the network settings, the default profiles "Fully-Automatic", "Semi-Automatic", "Nightmatic", and "Switch Mode" can now be adjusted for the entire network. Every product and group added to the network after the adjustment of the default templates will now be set up with the new values.
◦ New Feature: Network sensor
▪ Light sensors of individual products can now be shared across the entire network and used across groups.
◦ New Feature: Move networks
▪ Networks can now be moved from one project to another. The user must be an "Administrator" in both projects.
◦ New Feature: Profile call via pushbutton
▪ When assigning button functions, profiles can now also be saved.
◦ New Feature: Save dimming value fixed/dynamic
▪ This feature determines whether a manually set dimming value via button should subsequently be permanently saved as the new setpoint or whether the product should revert to the old setpoint when switched on.
◦ Optimization: Networks can now be saved locally at any time, even if an upload to the cloud is currently not possible.
Steinel Connect version 2.8.33
Updated At: 2024-06-17
Changes: Jun 17, 2024
Version 2.8.33
Optimizations / New Features:
◦ New Feature: Configuration of empty groups
▪ Empty groups can now be configured in advance. This allows the project to be set up with all groups and their respective settings beforehand. Later, individual products can be added to the respective groups.
◦ New Feature: Mass modification
▪ By long pressing and holding, multiple groups within a network can now be selected and edited simultaneously. The following parameters can be adjusted:
• Motion Sensor (Sensitivity)
• Brightness Value
• Main Light Dimming Level & Run-on Time
• Base Light Dimming Level & Run-on Time
◦ New Feature: Default templates
▪ In the network settings, the default profiles "Fully-Automatic", "Semi-Automatic", "Nightmatic", and "Switch Mode" can now be adjusted for the entire network. Every product and group added to the network after the adjustment of the default templates will now be set up with the new values.
◦ New Feature: Network sensor
▪ Light sensors of individual products can now be shared across the entire network and used across groups.
◦ New Feature: Move networks
▪ Networks can now be moved from one project to another. The user must be an "Administrator" in both projects.
◦ New Feature: Profile call via pushbutton
▪ When assigning button functions, profiles can now also be saved.
◦ New Feature: Save dimming value fixed/dynamic
▪ This feature determines whether a manually set dimming value via button should subsequently be permanently saved as the new setpoint or whether the product should revert to the old setpoint when switched on.
◦ Optimization: Networks can now be saved locally at any time, even if an upload to the cloud is currently not possible.
Steinel Connect version 2.7.65
Updated At: 2024-02-05
Changes: Feb 5, 2024
Version 2.7.65
Bugfixes:
- Due to a bug, times were not saved in the Nightmatic profile (e.g. for night saving mode). This bug has now been fixed.
- The "Sensor-Nightmatic" operating mode sometimes did not work as intended. Bugs should no longer occur in this context.
- General layout optimizations in the tile overview.
Disclaimer
Official App Store Link
We do not host Steinel Connect on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for Steinel Connect is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
