About STEINEL SmartRemote
An app for all cases. With the Smart Remote App you have everything under control. Many STEINEL sensors and sensor lights can be conveniently controlled directly from your tablet, smartphone or remote control. Simply load...
An app for all cases. With the Smart Remote App you have everything under control. Many STEINEL sensors and sensor lights can be conveniently controlled directly from your tablet, smartphone or remote control. Simply load the Smart Remote app onto your smartphone or tablet and connect directly to a STEINEL product via Bluetooth or connect to the Smart Remote via Bluetooth. The Smart Remote remote control replaces all existing STEINEL remote controls and saves you trouble of searching for the right remote control. Pretty smart, right?
Version History Due to a bug, the app sometimes could not connect to certain Bluetooth products. This bug has now been fixed. 3.12.4 04/09/2025 -In rare cases, a product is displayed in the app in “DFU mode” after a failed update. The app can now reconnect to these products as intended in order to install the update again. -General corrections to various translations 3.12.3 04/03/2025 - The app now supports displaying release notes for firmware updates. Currently, release notes for our latest KNX product updates are available – more will be added in the coming weeks - Fixed rare crashes related to infrared-controlled products - General stability improvements - Optimized the French translation 3.12.1 01/28/2025 -New product: The Dali presence detector "DALI DUO" is now supported by the app. -Bug fix: App crashes in connection with the product "XLED Pro One" have been fixed. -Bug fix: Due to an error in the logic, sometimes no firmware update was allowed for controller (2), although controller (0) was already on the latest firmware version. This bug has now been fixed and the logic works as desired. -Bug fix: Settings can no longer be made for TruePresence sensors while the sensor is initializing after startup. -Bug fix: Sometimes an error occurred when exporting a profile template and trying to import it again later. This bug has now been fixed. -General improvements: Various translation mistakes in other languages have been corrected. 3.9.8 04/30/2024 - Bugfixes - New products added 3.9.2 09/20/2023 Fix bug - Communication problem with IR products 3.8.4 05/12/2023 New function for TruePresence and ControlPro2: - Enable/disable status LED - Keep/reset TruePresence sensor noisemap During initialization, the sensor creates a noise filter to hide general background noise. The app can now be used to specify whether the noise filter should be recreated at each initialization, or retained. - These functions are only supported by new firmware versions. 3.8.3 05/10/2023 -new logic for update order for specific products -general stability improvements regarding app crashes 3.8.2 04/06/2023 -(Bluetooth) The mesh update for using the Steinel Connect app has been optimized and now runs more stable. -(Bluetooth) Optimization of firmware assignment for sensor products. -(Infrared) Due to a bug there were sometimes problems communicating with bidirectional products. This bug has now been fixed. -General stability improvements 3.8.1 03/09/2023 Font change according to our CI 3.7.0 11/14/2022 -MeshUpdates (transition to the new Steinel Connect App) added for more products. 3.6.7 08/19/2022 - Due to a bug some texts were not displayed in languages other than German and English. - Due to a bug some buttons were displayed as "inactive" in "user mode". - If the latest firmware update is already installed, this update will now no longer be shown as an available update. - If you deactivate the remote control for infrared products of the 3000 series, the setting options of Dali products are now also hidden as intended. 3.6.6 04/07/2022 New Features: - Display of the relevant controller for firmware updates - Display of only compatible firmware updates - Optional disabling of remote control in 3000 series Bug-Fixes: - some buttons were inactive at bluetooth products Improvements: - Fix stability problems with MeshUpdate - Basic light less than 10 minutes added 3.6.4 02/10/2022 New Features - Display of the relevant controller for firmware updates - Display of only compatible firmware updates - Optional disabling of remote control in 3000 series Improvements - Fix stability problems with MeshUpdate - Basic light less than 10 minutes added 3.6.3 02/05/2022 -New function: MeshUpdate The first products can now be updated for use in the Steinel Connect app. -Adding new sensor variants -Detailed view of sensor values for TruePresence sensor. -General improvements and bug fixes for DALI Application Controllers. 2.5.3 11/28/2021 - Automatic firmware updates for KNX multisensors - Implementation of the black variants of KNX sensors - Bug fixes for DALI2 Application Controllers - Bug fixes for DALI2 Input Devices - General corrections for translations - General app optimizations 3.5.2 10/19/2021 General app optimizations Bugfix for CP2 sensors 3.3.4 06/23/2021 Bugfix for iHF luminaires 3.3.3 05/29/2021 New products: DALI application controllers of the ControlPro II series Exchanged some product images Adjustment of some product names General bug fixes 3.3.2 05/27/2021 New Products: Control PRO II HF360 sensor DALI APC and L8XX M Leuchten General bug fixes 3.2.4 03/25/2021 General bug fixes to products and GUI design 3.1.2 12/12/2020 Bug fixes related to new design. 3.0.1 10/08/2020 New, revised user interface design and minor bug fixes. 3.0.0 09/17/2020 New, revised user interface design and minor bug fixes. 2.9.3 09/14/2020 General bug fixes for various products Specific extensions for RS PRO 5100 and R-Series: -Expansion of the networks from 25 to 50 in order to eliminate eventual communication problems in installations with more than 100 luminaires by using networks 26-50. -Firmware updates for RS PRO 5100 and R-Series can be downloaded directly from the app -RS PRO 5100: Function “Motion sensor switch on/off” added -RS PRO R-series: Minimum value for Basic light time setting changed from 10 minutes to 30 seconds 2.8.4 05/20/2020
Previous Versions
Here you can find the changelog of STEINEL SmartRemote since it was posted on our website on 2016-11-08 18:56:35.
The latest version is 3.12.4 and it was updated on 2026-06-23 02:16:29. See below the changes in each version.
STEINEL SmartRemote version 3.12.4
Updated At: 2026-05-30
Changes: Version History Due to a bug, the app sometimes could not connect to certain Bluetooth products. This bug has now been fixed. 3.12.4 04/09/2025 -In rare cases, a product is displayed in the app in “DFU mode” after a failed update. The app can now reconnect to these products as intended in order to install the update again.
-General corrections to various translations 3.12.3 04/03/2025 - The app now supports displaying release notes for firmware updates. Currently, release notes for our latest KNX product updates are available – more will be added in the coming weeks
- Fixed rare crashes related to infrared-controlled products
- General stability improvements
- Optimized the French translation 3.12.1 01/28/2025 -New product: The Dali presence detector "DALI DUO" is now supported by the app.
-Bug fix: App crashes in connection with the product "XLED Pro One" have been fixed.
-Bug fix: Due to an error in the logic, sometimes no firmware update was allowed for controller (2), although controller (0) was already on the latest firmware version. This bug has now been fixed and the logic works as desired.
-Bug fix: Settings can no longer be made for TruePresence sensors while the sensor is initializing after startup.
-Bug fix: Sometimes an error occurred when exporting a profile template and trying to import it again later. This bug has now been fixed.
-General improvements: Various translation mistakes in other languages have been corrected. 3.9.8 04/30/2024 - Bugfixes
- New products added 3.9.2 09/20/2023 Fix bug
- Communication problem with IR products 3.8.4 05/12/2023 New function for TruePresence and ControlPro2:
- Enable/disable status LED
- Keep/reset TruePresence sensor noisemap
During initialization, the sensor creates a noise filter to hide general background noise. The app can now be used to specify whether the noise filter should be recreated at each initialization, or retained.
- These functions are only supported by new firmware versions. 3.8.3 05/10/2023 -new logic for update order for specific products
-general stability improvements regarding app crashes 3.8.2 04/06/2023 -(Bluetooth) The mesh update for using the Steinel Connect app has been optimized and now runs more stable.
-(Bluetooth) Optimization of firmware assignment for sensor products.
-(Infrared) Due to a bug there were sometimes problems communicating with bidirectional products. This bug has now been fixed.
-General stability improvements 3.8.1 03/09/2023 Font change according to our CI 3.7.0 11/14/2022 -MeshUpdates (transition to the new Steinel Connect App) added for more products. 3.6.7 08/19/2022 - Due to a bug some texts were not displayed in languages other than German and English.
- Due to a bug some buttons were displayed as "inactive" in "user mode".
- If the latest firmware update is already installed, this update will now no longer be shown as an available update.
- If you deactivate the remote control for infrared products of the 3000 series, the setting options of Dali products are now also hidden as intended. 3.6.6 04/07/2022 New Features:
- Display of the relevant controller for firmware updates
- Display of only compatible firmware updates
- Optional disabling of remote control in 3000 series
Bug-Fixes:
- some buttons were inactive at bluetooth products
Improvements:
- Fix stability problems with MeshUpdate
- Basic light less than 10 minutes added 3.6.4 02/10/2022 New Features
- Display of the relevant controller for firmware updates
- Display of only compatible firmware updates
- Optional disabling of remote control in 3000 series
Improvements
- Fix stability problems with MeshUpdate
- Basic light less than 10 minutes added 3.6.3 02/05/2022 -New function: MeshUpdate
The first products can now be updated for use in the Steinel Connect app.
-Adding new sensor variants
-Detailed view of sensor values for TruePresence sensor.
-General improvements and bug fixes for DALI Application Controllers. 2.5.3 11/28/2021 - Automatic firmware updates for KNX multisensors
- Implementation of the black variants of KNX sensors
- Bug fixes for DALI2 Application Controllers
- Bug fixes for DALI2 Input Devices
- General corrections for translations
- General app optimizations 3.5.2 10/19/2021 General app optimizations
Bugfix for CP2 sensors 3.3.4 06/23/2021 Bugfix for iHF luminaires 3.3.3 05/29/2021 New products: DALI application controllers of the ControlPro II series
Exchanged some product images
Adjustment of some product names
General bug fixes 3.3.2 05/27/2021 New Products: Control PRO II HF360 sensor DALI APC and L8XX M Leuchten
General bug fixes 3.2.4 03/25/2021 General bug fixes to products and GUI design 3.1.2 12/12/2020 Bug fixes related to new design. 3.0.1 10/08/2020 New, revised user interface design and minor bug fixes. 3.0.0 09/17/2020 New, revised user interface design and minor bug fixes. 2.9.3 09/14/2020 General bug fixes for various products
Specific extensions for RS PRO 5100 and R-Series:
-Expansion of the networks from 25 to 50 in order to eliminate eventual communication problems in installations with more than 100 luminaires by using networks 26-50.
-Firmware updates for RS PRO 5100 and R-Series can be downloaded directly from the app
-RS PRO 5100: Function “Motion sensor switch on/off” added
-RS PRO R-series: Minimum value for Basic light time setting changed from 10 minutes to 30 seconds 2.8.4 05/20/2020
STEINEL SmartRemote version 3.12.4
Updated At: 2025-04-09
Changes: Apr 9, 2025
Version 3.12.4
Due to a bug, the app sometimes could not connect to certain Bluetooth products. This bug has now been fixed.
STEINEL SmartRemote version 3.12.4
Updated At: 2025-04-09
Changes: Due to a bug, the app sometimes could not connect to certain Bluetooth products. This bug has now been fixed.
STEINEL SmartRemote version 3.12.3
Updated At: 2025-04-03
Changes: Apr 3, 2025
Version 3.12.3
-In rare cases, a product is displayed in the app in “DFU mode” after a failed update. The app can now reconnect to these products as intended in order to install the update again.
-General corrections to various translations
STEINEL SmartRemote version 3.12.1
Updated At: 2025-01-28
Changes: Jan 28, 2025
Version 3.12.1
- The app now supports displaying release notes for firmware updates. Currently, release notes for our latest KNX product updates are available – more will be added in the coming weeks
- Fixed rare crashes related to infrared-controlled products
- General stability improvements
- Optimized the French translation
STEINEL SmartRemote version 3.9.8
Updated At: 2024-04-30
Changes: Apr 30, 2024
Version 3.9.8
-New product: The Dali presence detector "DALI DUO" is now supported by the app.
-Bug fix: App crashes in connection with the product "XLED Pro One" have been fixed.
-Bug fix: Due to an error in the logic, sometimes no firmware update was allowed for controller (2), although controller (0) was already on the latest firmware version. This bug has now been fixed and the logic works as desired.
-Bug fix: Settings can no longer be made for TruePresence sensors while the sensor is initializing after startup.
-Bug fix: Sometimes an error occurred when exporting a profile template and trying to import it again later. This bug has now been fixed.
-General improvements: Various translation mistakes in other languages have been corrected.
STEINEL SmartRemote version 3.9.2
Updated At: 2023-09-20
Changes: Sep 20, 2023
Version 3.9.2
- Bugfixes
- New products added
STEINEL SmartRemote version 3.8.4
Updated At: 2023-05-12
Changes: May 12, 2023
Version 3.8.4
Fix bug
- Communication problem with IR products
STEINEL SmartRemote version 1.2.1
Updated At: 2015-09-15
Disclaimer
Official App Store Link
We do not host STEINEL SmartRemote on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for STEINEL SmartRemote is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
