About Steinel Connect
Note: Not all Steinel products are currently compatible with this app. In this case, please use the Steinel SmartRemote app first. You can update your product soon via the SmartRemote app so that you can use it with the...
Note: Not all Steinel products are currently compatible with this app. In this case, please use the Steinel SmartRemote app first.
You can update your product soon via the SmartRemote app so that you can use it with the Steinel Connect app.
Innovative products and solutions are the most important mission for us at Steinel. Our Bluetooth-enabled luminaires and sensors can be networked with each other without any cables, put into operation and conveniently operated via app. All you need is the new Steinel Connect app. You can easily control your lighting in no time at all.
Special luminaire functions such as basic light, dimming of the main light, sensor run-on time or twilight switching threshold can be set directly in the app. Creating a luminaire group and configuring the individual group members is also done in just a few clicks with the Steinel Connect app. A step-by-step procedure and help functions make using the app easy. All settings can be changed at any time and adapted to new conditions and requirements.
Very important: All information is stored locally on your smartphone or tablet and is only shared with other devices if necessary. This makes the system particularly secure.
Steinel Connect App - Intelligent light can be so simple.
Previous Versions
Here you can find the changelog of Steinel Connect since it was posted on our website on 2023-07-03 15:03:17.
The latest version is 4.0-46 and it was updated on 2026-06-11 20:25:38. See below the changes in each version.
Steinel Connect version 4.0-46
Updated At: 2026-05-11
Changes: - “Small Projects” view: When setting up new products, connection errors could occasionally occur. This issue has been fixed.
- When products were identified during setup and then immediately confirmed, errors could occur in some cases. This issue has been resolved.
- In rare cases, updating from version 3.x to 4.0 caused the app to crash immediately on startup. This issue has been fixed.
Steinel Connect version 4.0-37
Updated At: 2026-04-16
Changes: - Fixed a rare app crash after updating to version 4.0 that could occur if network editing was briefly exited before the update was performed.
- Fixed an app crash when opening the info button in the “Add button” menu.
- Various bug fixes in the sensor controls of the MD IR 130, MD IR 270, and MD IR 360 sensors.
- Fixed an issue where, in certain cases, no appropriate notification was shown when schedules were used and the active scene was manually overridden.
Steinel Connect version 4.0-28
Updated At: 2026-03-18
Changes: New foundation, same experience:
The Steinel Connect app now runs on a new, optimized technical foundation. As a result, it is noticeably more stable and even more reliable in everyday use. We have also aligned UI elements across platforms — details that previously differed between iOS and Android now appear more consistent.
The feature set and the familiar way you use the app remain unchanged with this update.
Steinel Connect version 3.2-188442
Updated At: 2026-01-21
Changes: In small networks (2–5 products), a bug occasionally caused unstable data transmission. We have fixed this issue, so the setup process now runs much more reliably.
Steinel Connect version 3.2-187438
Updated At: 2025-11-21
Changes: Extension of the LuxMaster DALI-APC functionality:
Folding Door
When this feature is activated, two independently operating sensors in rooms separated by a movable partition wall work together as one.
Additional products supported besides LuxMaster:
Steinel HF360-2 and Hallway.
Each DALI group can now be individually set to full or semi-automatic mode.
Pushbuttons can now be assigned ON/OFF and dim up/down functions for individual DALI groups.
Steinel Connect version 3.1-186743
Updated At: 2025-10-17
Changes: This update brings support for the new STEINEL DALI-APC sensor and introduces many new features for DALI lighting control.
Steinel Connect version 3.0-185122
Updated At: 2025-08-28
Changes: The app update introduces a new DIY interface – intuitive, user-friendly, and ideal for smaller setups.
Smart lighting is now fit for everyday use!
The familiar interface is still available – find more info in the app.
Steinel Connect version 2.9-179534
Updated At: 2025-03-25
Changes: - New Products: RS PRO 5100 HFD, MD IR N130, MD IR N270, MD IR N360 – COM1 & uDIM
- Firmware Updates: Products on the latest firmware version are now marked in the update list.
- More Robust Provisioning: Improved stability when provisioning multiple devices simultaneously.
- Timing Issues: Fixed errors related to factory reset.
- Messages in Queue: Fixed redundant messages when removing products from groups.
Steinel Connect version 2.8-176068
Updated At: 2024-12-04
Changes: Due to a bug, products were lost in rare cases after the editing of a network was finished. This bug has now been fixed.
Steinel Connect version 2.8-173208
Updated At: 2024-10-15
Changes: New Feature: Configuration of Empty Groups
New Feature: Mass Modification
New Feature: Standard Templates
New Feature: Network Sensors
New Feature: Move Networks to other Projects
New Feature: Profile Call via Pushbutton
New Feature: Save Dim Value Fixed/Dynamic
Optimization: Save networks locally
Detailed release notes can be found in the app!
Disclaimer
Official Google Play Link
We do not host Steinel Connect on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Google and passed their terms and conditions to be listed there. We recommend caution when installing it.
The Google Play link for Steinel Connect is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
