metalwork

Metalwork mallets

large diameter heads & long reach heads in double wedge, round & flat
knoba - metalwork mallets

~§~

Heads are home grown & seasoned holly, wedges are mahogany & handles are beech.
knoba - metalwork mallets

~§~

Handles turned from old table legs, spoke shaved ovoid, danish oiled and burnished smooth with 00 wire wool.
knoba - metalwork mallets

~§~

Added extra weight with heated and shrunk rings
knoba - metalwork mallets

~§~

3 smaller mallets, beech dowel handles, holly heads.
knoba - metalwork mallets

~§~

All heads danish oil soaked in poly bag, finish left on heads
knoba - metalwork mallets

~§~

knoba - metalwork mallets

~§~

knoba - metalwork mallets

~§~

Materials:
Large heads: 2 x 125x50 mm o/d (5"x2" o/d) holly
Long reach heads: 2 x 180x40 mm o/d (7"x1 1/2" o/d) holly
Small heads: 3 x 100x32 mm o/d (4"x1 1/4" o/d) holly
Large head handles: 2 x 280x40 mm o/d (11"x1 1/2" o/d) beech
Long reach head handles: 2 x 325x40 mm o/d (12 1/4"x1 1/2" o/d) beech
Small head handles: 3 x 330x15 mm o/d (13"x19/32" o/d) beech
Danish oil
00 Wire wool

~§~

Wood-database.com – holly & beech

Colron – refined danish oil

Liberon – steel wool

•••

Wired edge dollies

Thanks to billsmetal – youtube. Cut & pickled materials…
knoba - wired edge dollies

~§~

How they will fit together
knoba - wired edge dollies

~§~

Bevelled one edge for easier weld penetration
knoba - wired edge dollies

~§~

Strong, flat heatsink (bench) & clamps to restrict distortion
knoba - wired edge dollies

~§~

Gouged the rear of seam & welded to give homogeneous fusion
knoba - wired edge dollies

~§~

Cleaned up with flap wheel & belt sander.
knoba - wired edge dollies

~§~

Materials:
1 x 20x32x50mm mild steel, Rectangular solid section
1 x 25x38x50mm mild steel, Rectangular solid section
2 x 25x3x50mm mild steel, Flat section
2 x 50x6x50mm mild steel, Flat section

Normalise & harder alloy for upgrades.

~§~

Smaller one here; base is 1/16″ (1.6mm) thick.
knoba - wired edge dollies

~§~

YouTube – Billsmetal

•••

3in1 metal working machine extras

Acquired a bare 3in1 metalwork machine (bends, cuts, rolls).
knoba - Rlc switches

~§~

Machine needed a sturdy base.
knoba - Rlc switches

~§~

Detail in the CAD file below
knoba - Rlc switches

~§~

Chassis finished.
knoba - Rlc switches

~§~

Made a shelf to catch cut sheet from perforated aluminium.
knoba - Rlc switches

~§~

Shelf being trialled.
knoba - Rlc switches

~§~

knoba - Rlc switches

~§~

Machine on base.
knoba - Rlc switches

~§~

I make tool socks for my equipment.
knoba - Rlc switches

~§~

Elastic stitch, eyelet, nylon cord and plastic holder thing.
knoba - Rlc switches

~§~

Keeps tooling with the machine for adjustment / maintenance.
knoba - Rlc switches

~§~

I also make covers for my equipment. Poly cotton.
knoba - Rlc switches

~§~

Detail in the CAD file below
knoba - Rlc switches

~§~

Identical scales on both slip roll adjusters. Machined from ally.
knoba - Rlc switches

~§~

Stamped & levelled thread bottoms so both top settings match.
knoba - Rlc switches

~§~

Added a fence carrier to keep it with the machine.
knoba - Rlc switches

~§~

Ready for work, or storage.
knoba - Rlc switches

~§~

Materials:
1.5m x 50mm x 6mm f/s
6.0m x 50mm x 3mm shs
1m x 2mm x 12mm i/d chs
4 x castors
4 x M10 Bolts x 50mm
12 x M12 Bolts x 70mm
4 x M10 Washers
12 x M12 Washers
4 x M10 Square Weldnuts
12 x M12 Hex Weldnuts
8 x 50mm x 50mm Black Square Plastic End Caps
Paint, Direct to metal, light blue
Polycotton 2m x 1.1m 
Polyester Thread
2.5m Ball chain

~§~</p

Clarke – SBR760 3 in 1 Sheet Metal Machine

knoba – 3in1 metal working machine stand – 2017.dxf

knoba – 3in1 metal working machine cover – 2017.dxf

•••

Van pedals

Wanted a set of 3 (not 2 + 1), legal, heavy duty, serviceable & pleasing pedals.
knoba - van pedals

~§~

Machined from 6 series aluminium, 5mm thick, curved, hammer finished, re-machined & polished.
knoba - van pedals

~§~

Studs are machined & polished m6 stainless button caps.
knoba - van pedals

•••

Van cab steps

Left; Hammer-formed finals (4mm thick, ground, beaten & polished).
Centre: Hardwood bucks routered from decking off-cuts.
Right: Original plastic steps (loading caused rust in underlying structure).
knoba - van cab steps

~§~

No annealing required. Machined nylon66 interfaces stuck with PU sealant.
knoba - van cab steps

~§~

Fixings are M8 stainless countersunk bolts & M8 square weldnuts.
knoba - van cab steps

~§~

themetalstore.co.uk – aluminium 5 bar checker plate

duckduckgo.com – square weld nuts

wikipedia.org – Nylon 66

Sikaflex – EBT+ polyurethane adhesive

•••

Tool tang drill bit

Almost any steel will do. 7mm o/d, 2 straight flutes, 1/4″ increment depth marks
knoba - Tool tang drill bit

~§~

Used in lathe, with new handles. Enlarge to fit individuals tangs…
knoba - Tool tang drill bit

~§~

4° included taper (as per machine taper)
knoba - Tool tang drill bit

~§~

Can easily remove shank for re-tempering. Link to CAD file below
knoba - Tool tang drill bit

~§~

Wiki – Machine taper

knoba – Tool Tang Drill Bit – 2017.dxf

•••

Ac Power Supply

Aluminium frame pattern for recycled multitap transformer
knoba - Ac Power Supply

~§~

Transformer core shaping buck
knoba - Ac Power Supply

~§~

Frame made
knoba - Ac Power Supply

~§~

knoba - Ac Power Supply

~§~

Donor psu…
knoba - Ac Power Supply

~§~

Ac system internals in
knoba - Ac Power Supply

~§~

240vac @ 50Hz in: 1, 3, 6, 9 & 12vac @ 50Hz out
knoba - Ac Power Supply

~§~

Illuminated the meter.
knoba - Ac Power Supply

~§~

New laminated fascia (cad file below)
knoba - Ac Power Supply

~§~

New laminated meter scale (cad file below)
knoba - Ac Power Supply

~§~

Schematics (Fritzing file below)
knoba - Ac Power Supply

~§~

knoba – Ac Power Supply – Fascia – 2016.dxf

knoba – Ac Power Supply – Meter Scale – 2016.dxf

knoba – Ac Power Supply – Schematic – 2016.fzz

•••

Hot tongs

long reach 24″ tongs made from 1″x3/8″ (25mmx10mm) steel bar.
knoba - Resistor Hot tongs - 01

~§~

Heated, viced up & twisted
knoba - Resistor Hot tongs - 02

~§~

9″ long reforged from old pincers, great for handling hot metals & acids
knoba - Resistor Hot tongs - 03

~§~

knoba - Resistor Hot tongs - 04

•••

Electric Guitar

20 year old incomplete project, found on freecycle.
knoba - electric guitar - 01

~§~

It finally has a voice and a lovely, unique, sound range.
knoba - electric guitar - 02

~§~

Fodic neck.
knoba - electric guitar - 03

~§~

I’ve done a lot to this guitar to get it up; hand beaten stainless steel jack port…
knoba - electric guitar - 04

~§~

Custom electrics; 3 x dpdt phase reversal switches, hi & lo tone controls.
knoba - electric guitar - 05

~§~

Non-magmetic 3 series stainless steel, all inlayed.
knoba - electric guitar - 06

~§~

New house guitar. Have some wood inlay to do & more wood carving.
knoba - electric guitar - 07

~§~

A first for me. Wood inlays (white oak)
knoba - electric guitar

~§~

Switches are 3 position DPDT (down = out of phase, centre = off, up = on)
knoba - electric guitar

~§~

304 stainless made from sheet
knoba - electric guitar

~§~

Body is dark red meranti.
knoba - electric guitar

~§~

Depth spotted with drill and chiselled flat, hide glued.
knoba - electric guitar

~§~

Closing trim
knoba - electric guitar

~§~

knoba - electric guitar

~§~

EMG – musical instrument pickups

knoba – Electric Guitar – 2017.dxf

•••

Hand graver

Hand graver for engraving metal.

Iroko handle, cast & machined brass body, 1/8″ hss lathe tool, m4 grub screws.
knoba - hand graver - 01

~§~

Handle is flat on one side to allow the tool a low attack angle.
knoba - hand graver - 02

~§~

knoba – Hand graver – 2016.dxf (CAD file link below)
knoba - hand graver - 02

~§~

knoba – Hand graver – 2016.dxf

•••

Leather strap cutter

For cutting stiff leathers into parallel strips (belts, straps,etc.)…
knoba - Leather strap cutter

~§~

Mostly made from Iroko & stainless steel.
knoba - Leather strap cutter

~§~

knoba - Leather strap cutter

~§~

knoba - Leather strap cutter

~§~

knoba - Leather strap cutter

~§~

knoba - Leather strap cutter

~§~

knoba – Leather strap cutter – 2015.dxf (link below)
knoba - Leather strap cutter

~§~

knoba – Leather strap cutter – 2015.dxf

knoba – Adjustable Dowel Jig

Wood Database – Iroko

•••

Desktop bookends

1.5mm 304 brushed Stainless steel.
knoba - desktop bookends

~§~

knoba - desktop bookends

~§~

knoba - desktop bookends

~§~

knoba - desktop bookends

~§~

knoba - desktop bookends

~§~

Current reading list…
knoba - desktop bookends

~§~

knoba – Desktop Bookends – xcf.zip (link below)
knoba - desktop bookends

~§~

knoba – Desktop Bookends – xcf.zip (link below)
knoba - desktop bookends

~§~

knoba – Desktop Bookends – xcf.zip

knoba – Folding bar

Bahco – Smooth cut files

Snap-on – File handles

Smith and Arrow – Disc abrasives

Makita – 5″ Angle grinders

HSE – Pickling paste

•••

Lathe chuck spider

Magnetic lathe chuck spider provides reference face for repeat cuts.
knoba - lathe chuck spider

~§~

Another one for my 4 jaw chuck (material is 5083 aluminium 15mm thick & 3mm x 3mm neodymium magnets).
knoba - lathe chuck spider

~§~

The spider also helps with work-holding when turning small parts.
knoba - lathe chuck spider

~§~

knoba – Lathe chuck spider – 2015.dxf (link below)
knoba - lathe chuck spider

~§~

knoba – Lathe chuck spider – 2015.dxf

•••

Single bevel edge fishtail carving skew

Someone gave me this today (it’s a Marples & Sons 1/2″ bevel edge chisel)…
knoba - single bevel edge fishtail carving skew

~§~

It’s in pretty poor shape…
knoba - single bevel edge fishtail carving skew

~§~

The sole of the blade…
knoba - single bevel edge fishtail carving skew

~§~

The top of the blade (the bevel edges can just be made out)…
knoba - single bevel edge fishtail carving skew

~§~

Here it is again after a couple of hours reworking…
knoba - single bevel edge fishtail carving skew

~§~

The blade has been: extracted, reforged, re-shaped, ground, hardened, tempered, lapped, polished & stropped.
knoba - single bevel edge fishtail carving skew

~§~

The handle has been: re-turned, sanded, waxed & polished.
knoba - single bevel edge fishtail carving skew

~§~

A sweet tool…
knoba - single bevel edge fishtail carving skew

•••

Leather Edge Bevellers

Made from medium carbon steel, brass & spalted cherry.
knoba - leather edge bevellers

~§~

knoba - leather edge bevellers

~§~

knoba - leather edge bevellers

•••

Adjustable dowel & drilling jig

Used for drilling blind holes, in matched faces, for dowelling metal or wood assemblies.
knoba - Adjustable Dowel Jig

~§~

125mm x 127mm x 15mm 5083 Aluminium Plate
knoba - Adjustable Dowel Jig

~§~

knoba - Adjustable Dowel Jig

~§~

Glued on cad template (link below)
knoba - Adjustable Dowel Jig

~§~

Optical centre punch (link below)
knoba - Adjustable Dowel Jig

~§~

Centre drilled used as fluffer (minimizes deflection) prior to pilot drilling
knoba - Adjustable Dowel Jig

~§~

Pilot drill all holes 3mm
knoba - Adjustable Dowel Jig

~§~

6mm drill
knoba - Adjustable Dowel Jig

~§~

Cut out profile
knoba - Adjustable Dowel Jig

~§~

Filed. A good selection of files helps; the dreadnought type is especially good on aluminium.
knoba - Adjustable Dowel Jig

~§~

Cleaned up a little more
knoba - Adjustable Dowel Jig

~§~

…and a little more
knoba - Adjustable Dowel Jig

~§~

Homemade edge chamferer/deburrer from an old three square file
knoba - Adjustable Dowel Jig

~§~

Drilling ready for threading m12 inserts
knoba - Adjustable Dowel Jig

~§~

Threading
knoba - Adjustable Dowel Jig

~§~

Countersinking
knoba - Adjustable Dowel Jig

~§~

Inserts: centre drilling
knoba - Adjustable Dowel Jig

~§~

Countersinking a relief to stop the slot in the screw snaping the twist drill used in the next operation
knoba - Adjustable Dowel Jig

~§~

Drilling to finish size
knoba - Adjustable Dowel Jig

~§~

Stamping sizes on the heads (there are 5 different sized inserts in my set)…
knoba - Adjustable Dowel Jig

~§~

Inserts fit nice…
knoba - Adjustable Dowel Jig

~§~

Insert needs to be below the surface on both sides
knoba - Adjustable Dowel Jig

~§~

Main body finished & inserts finished.
knoba - Adjustable Dowel Jig

~§~

Marking out the fences for the tool
knoba - Adjustable Dowel Jig

~§~

Cutting the parts
knoba - Adjustable Dowel Jig

~§~

Drilled, tapped,assembled to slider blocks and lapped flat
knoba - Adjustable Dowel Jig

~§~

Wallop….
knoba - Adjustable Dowel Jig

~§~

Underside
knoba - Adjustable Dowel Jig

~§~

knoba – Adjustable Dowel Jig – 2015.dxf (link below)
knoba - Adjustable Dowel Jig

~§~

knoba – Adjustable Dowel Jig – 2015.dxf

knoba – Optical centre punch

knoba – Dewalt chop saw mods

Wiki – 5083 aluminium alloy

•••

Head knives

Head knives for cutting & skiving leatherwork.
knoba - head knives

~§~

Made from spalted silver birch, brass & medium carbon steel alloy, mirror polished with beeswax finish.
knoba - head knives

~§~

Donor steel from old saw blade (old non tct blade). Took 2 teeth off to see if the metal could be hardened.
knoba - head knives

~§~

Heated both teeth to cherry for 3 min, quenched one & left other to cool.
knoba - head knives

~§~

My quenching bucket. Spark tests (grinding) on the 2 teeth gave good results.
knoba - head knives

~§~

Cleaned up both sides with abrasives (flap wheels, silicon carbide discs, etc.).
knoba - head knives

~§~

Stuck my templates to the blade…
knoba - head knives

~§~

Cut them out with angle grinder.
knoba - head knives

~§~

Centre marked a sharpening pivot point…
knoba - head knives

~§~

Drilled that mark…
knoba - head knives

~§~

Took off paper & made a sharpening jig for the belt sander.
knoba - head knives

~§~

That’s how this is going to go…
knoba - head knives

~§~

Sharpened & polished.
knoba - head knives

~§~

Heated to cherry for 3 mins (12mm = 30mins soak time). Had to keep the torch moving to keep the blade hot over its entire surface.
knoba - head knives

~§~

After quenching the blade but not the tang.
knoba - head knives

~§~

Re-polished.
knoba - head knives

~§~

Seasoned birch from my garden…
knoba - head knives

~§~

Turned some handles for my blades…
knoba - head knives

~§~

With thanks to Cap’n Eddie Castelin for his superb wood turning videos (link below).
knoba - head knives

~§~

knoba - head knives

~§~

knoba - head knives

~§~

Machined up some brass ferrules and epoxied on.
knoba - head knives

~§~

Tangs were tapered (4° included angle) to common machine taper specs (see link below)
knoba - head knives

~§~

Very pleased with results, they feel great, strop well and hold a good wire!
knoba - head knives

~§~

knoba – Leather Head Knives – xcf files – 2015.zip (link below)
knoba - head knives

~§~

knoba – Leather Head Knives – xcf files – 2015.zip (link below)
knoba - head knives

~§~

You tube – Cap’n Eddie Castelin

knoba – Leather Head Knives – xcf files – 2015.zip

Wiki – Machine taper

Wood Database – Silver birch

Colron – Refined Finishing Wax

•••

Window grills

To protect a pair of period glazed windows from ball impact strikes.
knoba - window mesh

~§~

Low profile, near hinge side, allows window to open without impediment.
knoba - window mesh

~§~

Upright frame sections take loading from the arched mesh and dissipate shocks.
knoba - window mesh

~§~

Frames will be fitted with only the top laterals fixed (m5 countersunks).
knoba - window mesh

~§~

knoba - window mesh

~§~

Balling achieved by melting ends with TIG.
knoba - window mesh

~§~

knoba - window mesh

~§~

Single sided adhesive closed cell foam tape (20mm x 1.5mm).
knoba - window mesh

~§~

knoba - window mesh

~§~

Homemade tucking fork used to shape the open wire ends.
knoba - window mesh

~§~

Wooden buck used to profile the weldmesh.
knoba - window mesh

~§~

knoba – Window Mesh – 2015.dxf (link below)
knoba - window mesh

~§~

knoba – Window Mesh – 2015.dxf

Parker Steel – 20 X 3mm Mild Steel Flat

Parker Steel – 2″ X 2″ X 10G GALV Weldmesh Sheet

Ebay – Black Single Sided Foam Tape Closed Cell 20mm Wide x 1.5mm Thick

Ebay – m5 Countersunk Pozi Machine Screws

Screwfix – No Nonsense Timber Decking Oil Clear 5Ltr

•••

Counterbore set

Made from a set of fully ground hss twist drills.
knoba - counterbore set

~§~

They bore a flat bottomed socket, after a similar size ‘normal drill bit’ has made a suitable pilot for it.
knoba - counterbore set

~§~

knoba - counterbore set

•••

Printer station

Steel tubular spine allows platters to swivel. On castors.

Printer station

~§~

ilovefreegle.org

•••

Sealey SM5 Metal Bandsaw mods

Made benchtop feet, completely serviced & repainted.

Bandsaw mods

~§~

Improved vice: precision pin lock for 90° cuts & ‘one-hand’ quick lock for angles.

Bandsaw mods

~§~

Improved “stock stop” for repeat cuts.

Bandsaw mods

~§~

Bandsaw mods

~§~

Bandsaw mods

~§~

Bandsaw mods

~§~

Sealey – SM5 Metal Cutting Bandsaw

•••

BBQ

Bbq from free-cycled gas tanks (propane & helium).

BBQ

~§~

BBQ

~§~

BBQ

~§~

BBQ

~§~

BBQ

~§~

ilovefreegle.org

•••

Trammel set with micro adjustment

Trammel set

~§~

knoba – Angle grinder pigtail for polishing

knoba – Metal casting furnace

Toolstation – 61139 Stainless Steel Threaded Bar M5 x 1m

•••

Pillar drill dividing plate

Round pillar drill table
Dividing plate for pillar drill

~§~

Scaled CAD template
Dividing plate for pillar drill

~§~

Template around drill table
Dividing plate for pillar drill

~§~

Table ready for marking
Dividing plate for pillar drill

~§~

Selection of different width chisels
Dividing plate for pillar drill

~§~

After marking through template
Dividing plate for pillar drill

~§~

Number stamps
Dividing plate for pillar drill

~§~

After marking numerals in degrees
Dividing plate for pillar drill

~§~

Dividing plate for pillar drill

~§~

Pointer (from metal biscuit tin)
Dividing plate for pillar drill

~§~

Dividing plate for pillar drill

~§~

Dividing plate allows holes to be drilled at regular intervals from a centre such as this die grinder mandrel
Dividing plate for pillar drill

~§~

knoba – Drill Indexing Plate – 2013.dxf

knoba – Keats plate

knoba – Center finder for drill indexer

Snap-on – PPC50AK Flat Chisel Set

LibreCAD – Open Source 2D-CAD

Cromwell – Senator Letter & Number Stamps

Cadbury – Chocolate products

•••

Incinerator

Rust free Incinerator from washing machine drum

~§~

The Freecycle Network

•••

Sliding vice base

Sliding vice saddle for metal horse

~§~

Knoba – Metal horse for metalworking

•••

Bass bin horn arms

•••

Metal spinning bearing formers

Metal spinning bearing formers in 2 crown profiles from 304 stainless steel

~§~

SKF – 608 Deep groove ball bearings, single row

•••

Leather beating bags

Leather beating bags for stretching metal

~§~

Pfaff – select 3.0 sewing machine

•••

Flattening plate

Flattening plate for hammering metal flat made from RSJ

~§~

Flattening plate

~§~

Hammerite – Direct to Rust Metal Paint

•••

Folding Bar

Folding Bar for making neat folds/bends in metal made from single piece of 2″ equal angle
Bending iron

~§~

Different radii on each edge.
knoba - folding iron

~§~

Parker Steel – Black Carbon Steel Equal Angles

Hammerite – Direct to Rust Metal Paint

•••

Radius keepers

Radius keepers prevent files from making score marks in the corners/radii while slotting out (m10 nut for scale).

~§~

Example usage
Radius keepers

•••

Center finder for drill indexer

Center finder for drill dividing plate
Center finder for drill indexer

~§~

knoba – Dividing plate for pillar drill

•••

Mini V Blocks

~§~

knoba – VBlock-AnglePipe we… 2008.dxf

knoba – Large V blocks

Hammerite – Direct to Rust Metal Paint

•••

Slappers

Slappers for shaping/smoothing metal sheet & panels

•••

MIG torch mini welding visor

Made from 304 stainless steel & shade #9 glass for restricted area access (vehicle welding)
MIG torch mini welding visor

~§~

Removable & serviceable
MIG torch mini welding visor

~§~

MIG torch mini welding visor

~§~

MIG torch mini welding visor

~§~

MIG torch mini welding visor

~§~

Forum – mig-welding.co.uk

•••

Metal casting furnace

Metal casting furnace suitable for aluminium, zinc & copper alloys

~§~

Stainless steel furnace ties from TIG wire filler
Metal casting furnace

~§~

Metal casting furnace

~§~

Using a jig to produce identical polystyrene blanks to mould the inner refractory lining
Metal casting furnace

~§~

Metal casting furnace

~§~

Metal casting furnace

~§~

Metal casting furnace

~§~

Metal casting furnace

~§~

Metal casting furnace

~§~

Reducing (carburizing), neutralising, oxidizing adjustment aperture and drain port.
Metal casting furnace

~§~

‘Pattern’ for my electronics stand
Metal casting furnace

~§~

Metal casting furnace

~§~

Machined back brass ingot showing very few inclusions
Metal casting furnace

~§~

Machined aluminium billet showing very few inclusions
Metal casting furnace

~§~

Metal casting furnace

~§~

Crucible Lifting irons & a pair of trivets.
Metal casting furnace

~§~

Trivets.
Metal casting furnace

~§~

15″ & 10″ cope & drag flasks.
Metal casting furnace

~§~

Pigging tin (cup cake baking tray, aka ‘ingot molds’).
Metal casting furnace

~§~

Excess melt used to make ingots. Ingots save crucible space & cut down dross on the next melt.
knoba - Metal casting furnace

~§~

The skimmed dross (impurities) from melted aluminium items.
knoba - Metal casting furnace

~§~

Flux / degaussing diffuser.
Metal casting furnace

~§~

Welded mild steel crucible for aluminium alloys.
Metal casting furnace

~§~

Extended trivet.
Metal casting furnace

~§~

Drossing spoon.
Metal casting furnace

~§~

Welded stainless steel crucible for copper alloys & crucible pouring shank.
Metal casting furnace

~§~

Melted brass, when skimming off the dross a beautiful, bright yellow & green luminosity is seen…
Metal casting furnace

~§~

Used for making round stock
Metal casting furnace

~§~

Halfords – V High Temperature Engine Enamel Paint Matt Black

Everbuild – Kos Fire Cement Buff

Hydroponics-simplified.com – Perlite

Myfordboy’s furnace

Bullfinch – Standard burner no.1250

•••

Wardrobe in stainless steel

Wardrobe in 304 stainless steel
Wardrobe in stainless steel

~§~

-FEET-

Parts for the castor mounts
Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

-SHOE RACK-

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

-UPRIGHTS-

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

-HANGER RAIL-

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

-TOP MESH-

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

-ASSEMBLY-

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

Wardrobe in stainless steel

~§~

knoba – Wardrobe – 2009.dxf

knoba – Angle grinder pigtail for polishing

knoba – Dewalt DW872 TCT metal chop saw mods

knoba – V Blocks

knoba – Doming plate

Forum – mig-welding.co.uk

Starrett – HSS Bi Metal Hole Saw Kits

Cibo – Finit-Easy

Cibo – Finimaster Pro

Parker steel – Stainless Steel Metric Flats

Parker steel – Stainless Steel Metric Rounds

Metalgeek.com – Tube Coping Calculator

•••

Dewalt DW 320 radial arm saw table

Radial arm saw table

~§~

Radial arm saw table

~§~

Radial arm saw table

~§~

Radial arm saw table

~§~

Radial arm saw table

~§~

Radial arm saw table

~§~

Radial arm saw table

~§~

Hammerite – Direct to Rust Metal Paint

Parkersteel – Carbon Steels Square Hollow Section

Castors-Online – 75mm Swivel Castor with Single bolt fixing

knoba – Radial Arm Saw Stand – 2011.dxf

•••

Mobile transceiver mount

Kenwwod MB430 Mobile transceiver mount

~§~

Quick release
Mobile transceiver mount

~§~

Tig welded
Mobile transceiver mount

~§~

Arc welded
Mobile transceiver mount

~§~

Mobile transceiver mount

~§~

Mobile transceiver mount

~§~

Mobile transceiver mount

~§~

Hot oil finish
Mobile transceiver mount

~§~

Mobile transceiver mount

~§~

Mobile transceiver mount

•••

Garage / workshop doors with Stainless steel hardware

Garage / workshop doors with 304 Stainless steel hardware
Garage / workshop doors with Stainless steel hardware

~§~

Garage / workshop doors with Stainless steel hardware

~§~

Garage / workshop doors with Stainless steel hardware

~§~

Garage / workshop doors with Stainless steel hardware

~§~

Garage / workshop doors with Stainless steel hardware

~§~

Garage / workshop doors with Stainless steel hardware

~§~

Garage / workshop doors with Stainless steel hardware

~§~

Garage / workshop doors with Stainless steel hardware

~§~

Garage / workshop doors with Stainless steel hardware

~§~

Garage / workshop doors with Stainless steel hardware

~§~

knoba – Sliding Dead Bolt – 2009.dxf

Cibo – Finit-Easy

Cibo – Finimaster Pro

Parker steel – Stainless Steel Metric Flats

Wenban-smith – Hardwoods

Wenban-smith – Softwoods

•••

Aerial in Stainless steel

Aerial in 304 Stainless steel
Aerial in Stainless steel

~§~

Aerial in Stainless steel

~§~

MIG welded with Easb 0.8 308lsi stainless wire & BOC Stainsheild
Aerial in Stainless steel

~§~

Aerial in Stainless steel

~§~

Aerial in Stainless steel

~§~

Aerial in Stainless steel

~§~

Aerial in Stainless steel

~§~

Aerial in Stainless steel

~§~

Aerial in Stainless steel

~§~

Aerial in Stainless steel

~§~

Aerial in Stainless steel

~§~

knoba – Angle grinder pigtail for polishing

knoba – V Blocks

knoba – Doming plate

Makita – 9565PCV 125mm Variable speed angle grinder

•••

V Blocks

~§~

V Blocks

~§~

V Blocks

~§~

V Blocks

~§~

V Blocks

~§~

V Blocks

~§~

V Blocks

~§~

V Blocks

~§~

V Blocks

~§~

V Blocks

~§~

V Blocks

~§~

V Blocks

~§~

knoba – VBlock-AnglePipe we… 2008.dxf

knoba – Mini V Blocks

Forum – mig-welding.co.uk

Hammerite – Direct to Rust Metal Paint

•••

Wood turning fixture & rests

Lathe wood turning fixture & polished 304 stainless steel rests
Wood turning fixture & rests

~§~

Wood turning fixture & rests

~§~

Wood turning fixture & rests

~§~

Wood turning fixture & rests

~§~

Extended rest.
Wood turning fixture & rests

~§~

Wood turning fixture & rests

~§~

knoba – Radius keepers

knoba – Spur drive

Homemadetools.net

•••

Sycamore & stainless steel mirror

Sycamore maple, american white oak & 304 stainless steel mirror
Sycamore & stainless steel mirror

~§~

Sycamore & stainless steel mirror

~§~

Wood-database.com – Sycamore Maple

Wood-database.com – White Oak

Azom.com – Stainless Steel Grade 304

Colron – Refined Finishing Wax

•••

Stainless steel TV Stand

Polished 304 Stainless steel & oak flatscreen TV Stand
Stainless steel & oak TV Stand