.@Prusa3D posts a photo with a CLEAR disclaimer "This is NOT a Prototype."
My entire feed:
"PRUSA IS MAKE AN MMU AMS!"
"It will share heat from the chamber to dry!"
"A PRUSA AMS!"
Me: 😕😕😕
WARNING TO @BambulabGlobal Users: Read this blog post before you update the firmware on your X/P series machines!!! The new Beta firmware will brick your ability to use @fever_soft as you have been and require a new interface to upload files.
GOOD NEWS EVERYONE!
Mandic Labs 2.0 is a GO! We’ve got a 1,300 sq-ft warehouse packed w/ 3D printers, tools, & dreams. HUGE thanks to our Founding Sponsors @josefprusa & @PCBWayOfficial & to @multiboard_io + @Voron_Design for helping kick it off! See you in the studio SOON!
Dear 3D Printer Companies who may be listening: Quiet fans. Contact @Noctua_at & figure it out. "Silent stepper drivers" don't mean much when every fan on a machine screams at 100% the entire time it is powered on.
After 14 years, I lost my shadow today. I may be hard to reach for a few days.
There is never a good time for something like this, but right now feels like an especially hard kick in the teeth.
This is a video I hoped to never make... We're getting kicked out of our Home / my Studio. All the details are in my latest @YouTube video. What's next? Time for a new Spaceport, if I can get a little help from you folks. Check it out here: youtu.be/ax3oOzlR8TU
Running a motion system break in on the V-Core 4 500. This is a spiral vase print at 400mm/s & .1mm layer w/ low temp settings as no plastic is pushed. Just running the belts round their path over & over again. Something I started doing a few builds ago. Does it matter? 🤷🏻