JavaScript is disabled in your browser which limits the functionality of the website. Please enable it to view page content and work with all website features

Drivers

M18 FUEL 2-Tool Combo Kit

M18 FUEL 2-Tool Combo Kit

SKU: MLW-3697-22

The M18 FUEL 2-Tool Combo Kit has the Most Powerful Drill, including AutoStop Control Mode for enhanced safety and the Fastest Driving Impact Driver. Includes an M18 FUEL 1/2" Hammer Drill, M18 FUEL 1/4" Hex Impact Driver, (2) M18 REDLITHIUM XC 5.0Ah Battery Pack, with an M18/M12 charger and carrying case. Our M18 FUEL ½ Drill Driver is the Industry's Most Powerful Drill and Most Compact solution. The POWERSTATE Brushless motor delivers the most power under load to complete 2-9/16" Self-Feed holes in dense materials for increased productivity and capability. At only 6.9 in length, this is the most compact drill in its class. The AUTO STOP Control Mode offers enhanced safety for the user by preventing over-rotation in a bind-up with the best reaction time in the industry. Our M18 FUEL ¼ Hex Impact Driver is the Most POWERFUL and FASTEST DRIVING impact driver, featuring ULTIMATE TRIGGER CONTROL. Our POWERSTATE Brushless motor delivers unmatched power for a full range of capabilities to complete the widest variety of applications. Increase productivity on the jobsite with the fastest driving speed without sacrificing power or control. REDLINK PLUS intelligence delivers ULTIMATE TRIGGER CONTROL by providing smooth acceleration for small fasteners to prevent stripping of screws or damaging of materials. Our M18 FUEL 2-Tool Combo kit is part of the M18 system which is fully compatible with over 200+ solutions.

GROUND ROD DRIVER 3/4 TO 1

GROUND ROD DRIVER 3/4 TO 1

SKU: STH-GD50133RF

3/4" - 1" Rods provide a competitive means of driving rods with proven, hard-hitting technology. Two models are available, the GD50132RF that drives 1/2-inch and 5/8-inch rods the GD50133 that drives 3/4-inch and 1 inch rods. The lifting eye allows the operator to suspend the driver above the rod with ease. The long side handles give the operator control during the driving process. The in-line valve in the 8-foot hose whips gives the operator On/Off control where he is standing. Both GD50 models have driving anvils which are designed to fit the rods which helps to minimize damage to the rod ends. The anvil which remains in contact with the rod while the hammer in the ground rod driver delivers its high energy blows to the anvil. The deep socket of the anvil keeps the driver from jumping off the end of the rod. The anvils are interchangeable, so that you can change the capacity of a ground rod driver by simply changing anvils. The removal of two bolts is all that is required to service the front end of the GD50.

GAS POWERED GROUND ROD DRIVER

GAS POWERED GROUND ROD DRIVER

SKU: RED-REDICLASSIC52

The REDIclassic52 is the original driver that set the standard as the first gas powered post driver on the market. The REDIclassic52 with a 2 ID guide tube is presented as the pioneering product in its category, setting the benchmark for gas-powered post drivers. As the original model, it™s recognized for establishing the standards of performance and reliability in the market. To enhance this section, we could emphasize its legacy, the innovation it brought to post driving technology, and its role in shaping the efficiency of fencing and construction projects.

MANUAL GROUND ROD DRIVER 5/8

MANUAL GROUND ROD DRIVER 5/8

SKU: REL-MGRDH

Permanent Grd. Rod Driver with Handles provide an effective alternative to auger type grounding devices in situations where the work surface is extremely hard or frozen. The driver is designed to handle an 8' rod while standing on the ground and drive the rod below the grade without the need of additional tools. It handles the job with relative ease and contains the impact force within the unit. A 5' section of 5/8 inch copper clad threaded ground rod is included with the temporary ground rod drivers. The temporary ground rod drivers allow the ground rod to be installed or removed. A threaded adapter is available for the temporary ground rod driver to allow ground rods to be permanently installed. The permanent or temporary drivers are available with a straight shaft or with "D" style handles.

SCREWDRIVER 5/16 FLAT HEAD

SCREWDRIVER 5/16 FLAT HEAD

SKU: KLT-600-6

Square Shank, 3/8" X 8", 13-7/16" OAL are designed for the most demanding uses. With heavy-duty square shank for wrench-assisted turning. Keystone-Tip (Flathead)

SCREWDRIVER 3/8 FLAT HEAD

SCREWDRIVER 3/8 FLAT HEAD

SKU: KLT-600-8

Square Shank, 1/2" X 12", 17-6/16" OAL are designed for the most demanding uses. With heavy-duty square shank for wrench-assisted turning. Keystone-Tip (Flathead)

DRIVER, DEMOLITION, ROUND, 7"

DRIVER, DEMOLITION, ROUND, 7"

SKU: KLT-602-7DD

Engineered, manufactured and tested for prying and chiseling

T-HANDLE SET;6" BLADE,W/ STAND,SAE

T-HANDLE SET;6" BLADE,W/ STAND,SAE

SKU: KLT-JTH610E

Adjustable hand saw blade tension up to 30,000 PSI for fast, precise cuts

GROUNDER TEMP. TRUCK ( KIT)

GROUNDER TEMP. TRUCK ( KIT)

SKU: REL-MGRD

Permanent Grd. Rod Driver with Handles provide an effective alternative to auger type grounding devices in situations where the work surface is extremely hard or frozen. The driver is designed to handle an 8' rod while standing on the ground and drive the rod below the grade without the need of additional tools. It handles the job with relative ease and contains the impact force within the unit. A 5' section of 5/8 inch copper clad threaded ground rod is included with the temporary ground rod drivers. The temporary ground rod drivers allow the ground rod to be installed or removed. A threaded adapter is available for the temporary ground rod driver to allow ground rods to be permanently installed. The permanent or temporary drivers are available with a straight shaft or with "D" style handles.

GROUNDER TEMP. TRUCK ( KIT)

GROUNDER TEMP. TRUCK ( KIT)

SKU: REL-MGRD-6

Reliable Manual Ground Rod Drivers Provide an effective alternative to auger type grounding devices in situations where the work surface is extremely hard or frozen. The driver is designed to handle an 8' rod while standing on the ground and drive the rod below the grade without the need of additional tools. It handles the job with relative ease and contains the impact force within the unit. A 5' section of 5/8 inch copper clad threaded ground rod is included with the temporary ground rod drivers. The temporary ground rod drivers allow the ground rod to be installed or removed. A threaded adapter is available for the temporary ground rod driver to allow ground rods to be permanently installed. The permanent or temporary drivers are available with a straight shaft or with "D" style handles.

NUT DRIVER 3/8 SHAFT 6 INS

NUT DRIVER 3/8 SHAFT 6 INS

SKU: PTA-IS36-3-8-PTA

Nut Driver 3/8" Shaft 6" INS is injected over a metal shaft that reaches from end-to-end. The composite injection is an extra-light technology thanks a thiner layer of insulation with a higher level of protection due to its density and shock-resistance.

GROUND ROD DRIVER W/HANDLES

GROUND ROD DRIVER W/HANDLES

SKU: DEM-A58H

ADAPTER11/8X6FOR 1 RODS

ADAPTER11/8X6FOR 1 RODS

SKU: BRL-B32789

Brunner and Lay Ground Rod Drivers are available in 5/8 3/4 7/8 and 1 rod sizes. 11/8 x 6 shank with a 3 deep hole incorporated in the driving end to guide and support the ground rod.

GROUND ROD DRIVER

GROUND ROD DRIVER

SKU: REL-GRD1

The REL-GRD Series Hydraulic Ground Rod Drivers from RELIABLE EQUIPMENT have been designed to drive 1-inch galvanized ground rods FAST.

SDS MAX Ground Rod Driver

SDS MAX Ground Rod Driver

SKU: MLW-48-62-4091

SDSMAX Ground Rod Driver 10-1/2" L, 5/8" & 3/4" Rod Dia

M18 FUEL SURGE 1/4" Hex Hydraulic Driver

M18 FUEL SURGE 1/4" Hex Hydraulic Driver

SKU: MLW-2760-20

M18 FUEL SURGE 1/4" Hex Hydraulic Driver

GROUND ROD DRIVER, MANUAL

GROUND ROD DRIVER, MANUAL

SKU: REL-MGRD-DO

GROUND ROD DRIVER, MANUAL

MANUAL GROUND ROD DRIVER

MANUAL GROUND ROD DRIVER

SKU: REL-MGRD-NH

Ground Rod Driver NO Handles
Drive Shaft: 29-1/2 L x 2-3/4 R

5/16" Slotted 6" Cushion Grip Demolition Screwdriver (USA)

5/16" Slotted 6" Cushion Grip Demolition Screwdriver (USA)

SKU: MLW-MT208

5/16" Slotted 6" Cushion Grip Demolition Screwdriver (USA)Our Milwaukee® Cushion Grip Screwdrivers (USA) are manufactured to give the professional the best-fitting screwdriver with max grip. Our screwdriver tips are custom machined to deliver a precise fit and reduce stripping during demanding fastening applications. For added confidence, the tips are laser etched to increase the gripping surface. Manufactured with high-strength boron-infused steel for increased hardness, our screwdrivers stand up to the demands of the site with ultimate durability and life. Providing increased versatility, select screwdrivers include a wrench-ready bolster for added torque and a knurled shank for precision control. Quick identification markings on the handle make it easy to identify screwdriver tip size and type, including Phillips, cabinet, ECX, slotted, and square. The demolition screwdrivers also include a hammer-ready strike cap. Our screwdrivers range in shank sizes from 3-inch to 10-inch. Our Milwaukee Cushion Grip Screwdrivers (USA) are made in the USA with best-in-class manufacturing technology and USA-sourced materials all backed by a complete Lifetime Guarantee.

11-IN-1 - SCREWDRIVER - NUT DRIVER

11-IN-1 - SCREWDRIVER - NUT DRIVER

SKU: KLT-32500

Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes. Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess. Interchangeable blade for fast and easy switch out; comfortable Cushion-Grip handle. Blast finish bit tips provide a firm hold and reduce cam-out. The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX)

11-IN-1 MAGNETIC SCREWDRIVER

11-IN-1 MAGNETIC SCREWDRIVER

SKU: KLT-32500MAG

Integrated screwdriver / nut driver magnetic barrel holds 8 popular tips and converts to 3 nut driver sizes
Strong, Rare-Earth magnets securely hold bits and fasteners
Industrial strength heat treated bits
Interchangeable shaft for quick and easy switch out
Cushion-Grip handle for greater torque and comfort
Includes tips: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX®, and #1 and #2 square recess
Blast-finished bit tips provide a firm hold and reduce cam-out
The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX)

SCREWDRIVER, 3/8" FLAT HEAD

SCREWDRIVER, 3/8" FLAT HEAD

SKU: KLT-602-10

3/8-Inch Keystone Screwdriver, 10-Inch Round Shank

SCREWDRIVER, 5/16" FLAT HEAD

SCREWDRIVER, 5/16" FLAT HEAD

SKU: KLT-602-6

5/16-Inch Keystone Screwdriver, 6-Inch Round Shank

SCREWDRIVER, PHILLIPS, #2 pt.

SCREWDRIVER, PHILLIPS, #2 pt.

SKU: KLT-603-4

#2 Phillips Screwdriver, 4-Inch Round Shank

Klein Tools Replacement File Screw for 1684-5F Grip

Klein Tools Replacement File Screw for 1684-5F Grip

SKU: KLT-573

The Klein Tools replacement file screw is designed specifically for the 1684-5F wire pulling grip, ensuring proper assembly and secure operation. This genuine replacement fastener helps maintain grip performance and extend tool service life.