About TouchMix-8/16 Control
TouchMix-8/16 Control is an app for iPad, iPad mini, iPhone and iPod touch that provides wireless control of QSC TouchMix-8 and TouchMix-16 digital sound reinforcement mixers. Visit http://www.qsc.com for more...
TouchMix-8/16 Control is an app for iPad, iPad mini, iPhone and iPod touch that provides wireless control of QSC TouchMix-8 and TouchMix-16 digital sound reinforcement mixers. Visit http://www.qsc.com for more information. The app is not intended to perform any audio mixing or processing tasks on its own. When run on the iPad and iPad mini, the TouchMix Control app closely follows the operational paradigm of the mixers. The iPad and the mixer GUI operate independently so it is possible for the iPad to act as an additional user interface that can display and control a set of functions completely different from those being controlled by the mixer’s screen and hardware. An alternate operation mode - Follow Mixer - is also available. With Follow Mixer engaged, the iPad follows the fader selection on the mixer. Touch a fader on the mixer and the iPad will display that channel’s Overview, EQ, Compressor, Sends or Gate screen. Touch a parameter on the iPad and the mixer’s rotary control will adjust it - or just drag on the iPad screen. When used without an actual TouchMix, the app acts as a demonstration of the mixer GUI and functionality but does not control audio in any way. On the iPhone, the TouchMix Control app functions as a personal stage monitor mix control with the option to also remotely operate the mixer’s record and playback features as well as programmable user buttons. To prevent inadvertent adjustment of controls, the mixer operator may allow or restrict access to selected functions on a per-device basis. Features - Input channel processing (4-band PEQ, variable high & Low-cut filters, gates, compressor) - Output channel processing (1/3 octave GEQ, 6-band PEQ, variable high & Low-cut filters, anti-feedback filters and wizard, delay) - Real Time Analyzer (RTA) - Select Simple or Advanced mode - Displays channel and output level meters - Channel and output levels - Effects and aux (monitor) send levels - Select input presets from extensive library - Select and control 4 simultaneous effects - Input and output mutes and cues - Configure and control DCA and Mute groups - Multi-track recorder arm, playback and transport - Includes TouchMix Info system, built-in reference guide. - And more Requirements - iPad, iPad mini, iPhone, iPod touch running iOS 16.5 or later. - QSC TouchMix-8 or TouchMix-16 with version 3.0 or higher firmware installed. - QSC TouchMix-8 or TouchMix-16 with supplied Wi-Fi adaptor installed or connected to a network via USB-to-Ethernet adaptor. - Note that controlling a mixer with multiple iOS devices running different versions of the app is not recommended. - QSC, LLC Website TouchMix Support Application License Agreement.
Version History - Improved reconnection to mixer after briefly switching away from TouchMix app. - Fixed improper display of dialog boxes. - Fixed a bug that caused a “Session already exists” message to be displayed when attempting to create a new session from an iOS device. - The user will now be informed if they have chosen an illegal prefix (such as CON) for their device name. - Fixed an issue that caused loss of iOS app control over personal monitor mix under certain conditions. - Various small bug fixes. 3.0.34 04/01/2024 - Capability to name new devices that are connected wirelessly to the mixer using unique names that will appear in the mixer’s Remote Control list. - Fixed issue where the app could crash when the mobile device was disconnected from the mixer. 3.0.26 12/19/2023 - Fixed problem connecting to TM16 mixer where faders appeared greyed out - Improved app reconnection to mixer after the iOS device comes out of sleep 3.0.25 06/09/2023 Some newer iPad models with wider aspect ratios displayed very short faders when running the previous version. This release will display the faders at their proper length. 3.0.21 06/06/2023 This update from Apple will improve the functionality of this app. No new features are included. Support for new mixer features (see TouchMix-8/16 Release Notes). Fixed a bug that allowed users to access functions from the sidebar without authorization. Various minor bug fixes and refinements. 3.0.20 10/31/2017 * Smartphone Record/Playback screen now features large buttons and display making it more useful as a remote transport control. * Fixed inoperative Anti-Feedback Wizard on TouchMix-8 auxes. * Fixed a problem that caused iPad battery charge indicator to not display on status bar. * Added iPad battery charge indicator status bar. 3.0.17 08/17/2017 * The 3.0 release of TouchMix-8/16 Control supports new features that require the installation of version 3.0 software on the TouchMix-8 or -16. The mixer software is available at www.qsc.com . * This release adds features from the TouchMix-30 Pro and more. * Updated graphics and refined layout. * Direct access to auxiliary mixes with buttons on left of screen. * A Real Time Analyzer (RTA) is available with all input and output EQ displays or as a separate display that may select any output, talkback or cue as its signal source. * Tablet Follows Mixer – When in Follow Mixer mode, touching any fader on the mixer will cause the tablet to display the channel screen associated with that fader. * Controls playback of stereo MP3 files on the mixer. * All mixer outputs now have 6 band parametric EQ, 1/3 octave graphic EQ and 8 bands of anti-feedback filters in addition to the existing compressor and delay. * Anti-Feedback Wizard (available on all mix outputs) assists in “ringing out” the system by automatically setting the anti-feedback filters. * The Room Tuning Wizard assists the operator in adjusting equalization and fine tuning a loudspeaker system to an acoustical space. * Speaker presets for QSC E-Series and K.2 loudspeakers. * Copy and Paste lets you easily duplicate or move settings from mixes, channels, EQ, dynamics and more. * Channel Safe prevents designated channels from changing when a scene is recalled. * The "Omit Levels” function on the Preset page now also omits group assignments. Presets can be recalled without effecting mute group, sub group and DCA group assignments. * Input signal delay up to 100 msec. * Tap Tempo for delay effects. * Eight user buttons. * The mixer will now format a connected USB drive to prepare it for a multi-track recording session. * Updated Info System (built in Owner’s Manual) to include new and improved features. 3.0.12 06/07/2017 Support for TouchMix firmware 2.1 New Features (See details in description) Bug fixes 2.1.1 04/23/2015 Support for TouchMix firmware 2.0 New Features (See details in description) Bug fixes 2.0.23 01/19/2015 Bug fixes Support for TouchMix firmware V1.0.3583. Please upgrade your mixer by downloading the new firmware at the QSC web site (http://qsc.com/resources/software/touchmix-firmware) 1.0.15 10/06/2014 Bug fixes for initial release 1.0.14 08/20/2014 1.0.8 07/22/2014
Previous Versions
Here you can find the changelog of TouchMix-8/16 Control since it was posted on our website on 2016-09-25 03:20:33.
The latest version is 3.0.34 and it was updated on 2026-06-10 22:54:35. See below the changes in each version.
TouchMix-8/16 Control version 3.0.34
Updated At: 2026-06-10
Changes: Version History - Improved reconnection to mixer after briefly switching away from TouchMix app.
- Fixed improper display of dialog boxes.
- Fixed a bug that caused a “Session already exists” message to be displayed when attempting to create a new session from an iOS device.
- The user will now be informed if they have chosen an illegal prefix (such as CON) for their device name.
- Fixed an issue that caused loss of iOS app control over personal monitor mix under certain conditions.
- Various small bug fixes. 3.0.34 04/01/2024 - Capability to name new devices that are connected wirelessly to the mixer using unique names that will appear in the mixer’s Remote Control list.
- Fixed issue where the app could crash when the mobile device was disconnected from the mixer. 3.0.26 12/19/2023 - Fixed problem connecting to TM16 mixer where faders appeared greyed out
- Improved app reconnection to mixer after the iOS device comes out of sleep 3.0.25 06/09/2023 Some newer iPad models with wider aspect ratios displayed very short faders when running the previous version. This release will display the faders at their proper length. 3.0.21 06/06/2023 This update from Apple will improve the functionality of this app. No new features are included.
Support for new mixer features (see TouchMix-8/16 Release Notes).
Fixed a bug that allowed users to access functions from the sidebar without authorization.
Various minor bug fixes and refinements. 3.0.20 10/31/2017 * Smartphone Record/Playback screen now features large buttons and display making it more useful as a remote transport control.
* Fixed inoperative Anti-Feedback Wizard on TouchMix-8 auxes.
* Fixed a problem that caused iPad battery charge indicator to not display on status bar.
* Added iPad battery charge indicator status bar. 3.0.17 08/17/2017 * The 3.0 release of TouchMix-8/16 Control supports new features that require the installation of version 3.0 software on the TouchMix-8 or -16. The mixer software is available at www.qsc.com .
* This release adds features from the TouchMix-30 Pro and more.
* Updated graphics and refined layout.
* Direct access to auxiliary mixes with buttons on left of screen.
* A Real Time Analyzer (RTA) is available with all input and output EQ displays or as a separate display that may select any output, talkback or cue as its signal source.
* Tablet Follows Mixer – When in Follow Mixer mode, touching any fader on the mixer will cause the tablet to display the channel screen associated with that fader.
* Controls playback of stereo MP3 files on the mixer.
* All mixer outputs now have 6 band parametric EQ, 1/3 octave graphic EQ and 8 bands of anti-feedback filters in addition to the existing compressor and delay.
* Anti-Feedback Wizard (available on all mix outputs) assists in “ringing out” the system by automatically setting the anti-feedback filters.
* The Room Tuning Wizard assists the operator in adjusting equalization and fine tuning a loudspeaker system to an acoustical space.
* Speaker presets for QSC E-Series and K.2 loudspeakers.
* Copy and Paste lets you easily duplicate or move settings from mixes, channels, EQ, dynamics and more.
* Channel Safe prevents designated channels from changing when a scene is recalled.
* The "Omit Levels” function on the Preset page now also omits group assignments. Presets can be recalled without effecting mute group, sub group and DCA group assignments.
* Input signal delay up to 100 msec.
* Tap Tempo for delay effects.
* Eight user buttons.
* The mixer will now format a connected USB drive to prepare it for a multi-track recording session.
* Updated Info System (built in Owner’s Manual) to include new and improved features. 3.0.12 06/07/2017 Support for TouchMix firmware 2.1
New Features (See details in description)
Bug fixes 2.1.1 04/23/2015 Support for TouchMix firmware 2.0
New Features (See details in description)
Bug fixes 2.0.23 01/19/2015 Bug fixes
Support for TouchMix firmware V1.0.3583. Please upgrade your mixer by downloading the new firmware at the QSC web site (http://qsc.com/resources/software/touchmix-firmware) 1.0.15 10/06/2014 Bug fixes for initial release 1.0.14 08/20/2014 1.0.8 07/22/2014
TouchMix-8/16 Control version 3.0.34
Updated At: 2024-04-01
Changes: - Improved reconnection to mixer after briefly switching away from TouchMix app.
- Fixed improper display of dialog boxes.
- Fixed a bug that caused a “Session already exists” message to be displayed when attempting to create a new session from an iOS device.
- The user will now be informed if they have chosen an illegal prefix (such as CON) for their device name.
- Fixed an issue that caused loss of iOS app control over personal monitor mix under certain conditions.
- Various small bug fixes.
TouchMix-8/16 Control version 3.0.34
Updated At: 2024-04-01
Changes: Apr 1, 2024
Version 3.0.34
- Improved reconnection to mixer after briefly switching away from TouchMix app.
- Fixed improper display of dialog boxes.
- Fixed a bug that caused a “Session already exists” message to be displayed when attempting to create a new session from an iOS device.
- The user will now be informed if they have chosen an illegal prefix (such as CON) for their device name.
- Fixed an issue that caused loss of iOS app control over personal monitor mix under certain conditions.
- Various small bug fixes.
TouchMix-8/16 Control version 3.0.26
Updated At: 2023-12-19
Changes: Dec 19, 2023
Version 3.0.26
- Capability to name new devices that are connected wirelessly to the mixer using unique names that will appear in the mixer’s Remote Control list.
- Fixed issue where the app could crash when the mobile device was disconnected from the mixer.
TouchMix-8/16 Control version 3.0.25
Updated At: 2023-06-09
Changes: Jun 9, 2023
Version 3.0.25
- Fixed problem connecting to TM16 mixer where faders appeared greyed out
- Improved app reconnection to mixer after the iOS device comes out of sleep
TouchMix-8/16 Control version 2.1.1
Updated At: 2014-08-20
Disclaimer
Official App Store Link
We do not host TouchMix-8/16 Control on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for TouchMix-8/16 Control is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
