TouchMix-30 Control 3.0.34 - App Store

---

About TouchMix-30 Control

TouchMix-30 Control is an app for iPad, iPad mini, iPhone and iPod touch that provides wireless control of QSC TouchMix-30 Pro digital sound reinforcement mixers. The app is not intended to perform any audio mixing or...

TouchMix-30 Control is an app for iPad, iPad mini, iPhone and iPod touch that provides wireless control of QSC TouchMix-30 Pro digital sound reinforcement mixers. The app is not intended to perform any audio mixing or processing tasks on its own. Visit http://www.qsc.com for more information. When run on the iPad and iPad mini, the TouchMix-30 Control app closely follows the operational paradigm of the mixer. The iPad and the mixer GUI operate independently so it is possible for the iPad to act as an additional user interface that can display and control a set of functions completely different from those being controlled by the mixer’s screen and hardware. An alternate operation mode - Follow Mixer - is also available. With Follow Mixer engaged, the iPad follows the fader selection on the mixer. Touch a fader on the mixer and the iPad will display that channel’s Overview, EQ, Compressor, Sends or Gate screen. Touch a parameter on the iPad and the mixer’s rotary control will adjust it - or just drag on the iPad screen. When used without an actual TouchMix, the app acts as a demonstration of the mixer GUI and functionality. On the iPhone and iPod touch, the TouchMix Control app functions as a personal stage monitor mix control with the option to also remotely operate the mixer’s record and playback features as well as programmable user buttons. To prevent inadvertent adjustment of controls, the mixer operator may allow or restrict access to selected functions on a per-device basis. Features - Input channel processing (4-band PEQ, variable high & low-cut filters, gates, compressor) - Output channel processing (1/3 octave GEQ, 6-band PEQ, delay, variable high & low-cut filters, anti-feedback filters and wizard) - Two Real Time Analyzer (RTA) - Simple or Advanced mixer mode - Displays channel and output level meters - Channel and output levels - Effects and Aux (monitor) send levels - Select input presets from extensive library - Select and control 4 simultaneous effects - Input and output Mutes and Cues - Configure and control DCA and Mute Groups - Multi-track recorder arm, playback and transport - Two 24-channel Auto mixers - Scenes, Snapshots and Cue List Management - Includes TouchMix on-board Info system reference guide. - And more... Requirements - iPad, iPad mini, iPhone, iPod touch running iOS 16.5 or later - QSC TouchMix-30 Pro with version 3.0 or higher firmware installed. - QSC TouchMix-30 Pro connected to a Wi-Fi network (recommended). Visit http://www.qsc.com for more details on Wi-Fi connections. - Note that controlling a mixer with multiple iOS devices running different versions of the app is not recommended. - QSC, LLC Website TouchMix Support Application License Agreement.

Version History - Improved reconnection to mixer after briefly switching away from TouchMix app. - Fixed improper display of dialog boxes. - Improved iPad Cue List operation. - Fixed an issue that caused the iPad app to crash when connecting to a mixer while recording. - Fixed Home Screen Copy and Paste bug. - Made changes to prevent entry of non-alphanumeric characters in user-entered filenames. - The user will now be informed if they have chosen an illegal prefix (such as CON) for their device name. - Fixed a bug that could cause the wrong popup to display under certain conditions when creating a new session and Aux output Aux Sends screen. - Fixed an issue that caused nudge buttons to be unresponsive when adjusting main mix from iOS app. - Fixed an issue that resulted in improper functioning of security login from app. - Fixed an issue that caused loss of iOS app control over personal monitor mix under certain conditions. - Various small bug fixes. 3.0.34 04/03/2024 - Capability to name new devices that are connected wirelessly to the mixer using unique names that will appear in the mixer’s Remote Control list. - Fixed issue where the app would disconnect from the mixer when not active. - Fixed issue where the app could crash when the mobile device was disconnected from the mixer. 3.0.22 11/07/2023 New Features / Improvements - Improved patch matrix editing. Bug Fixes - Fixed a bug that caused Omit from Scene Recall to function improperly. - Resolved an issue that could cause the screen and controls to freeze during intensive use. - Fixed a minor display problem on the Monitor control popup. - Fixed issues related to channel safe. - Fixed sticky clip indicators on auxiliary outputs. Known Issues - The internal Info screens for ‘Menu’ and ‘Scenes, Snapshots, and Cue Lists’ are not provided in any languages other than English. 3.0.19 06/07/2023 With TouchMix-30 Pro firmware version 3.0, Scenes, Snapshots and Cue Lists can be used to store and recall TouchMix-30 Pro mixer settings. Scenes provide the ability to store and recall the entire mixer configuration, while Snapshots allow to save and recall selected settings for designated channels without affecting other mixer settings. Cue Lists select and arrange Scenes, Snapshots and audio files into a predetermined sequence for recall during a show, while offline editing provides the ability to create and edit mixer configurations without the mixer being connected to Wi-Fi. The firmware version 3.0 release is also supported by an updated TouchMix Control app for iOS and devices, providing further enhancements to the remote control experience. 3.0.16 03/03/2023 Fixed a problem that could prevent display of the channel name label and gain indication. 2.0.10 01/28/2020 •The TouchMix-30 now supports external control by third-party, motorized-fader control surfaces connected to an iOS tablet via MIDI-over-USB. There is also a new External Faders mode that displays a channel strip view on screen when used with the external control surface. An iPad and control surface may now serve as a remote mix station with wireless connection to the mixer. Visit qsc.com for details on connections and compatible control surfaces. •The app also supports custom fader banks three Custom Fader Banks that may be easily configured to include any combination of input, output, FX return, sub-group and DCA group faders. •Additional input channel presets for percussion (cajon, djembe, timbale, percussion toys), electronic drum kit, harmonica, flute, cello, accordion and various Banda instruments. Adjustments were also made to vocal and bass presets. •Support for CP Series Compact Powered Loudspeakers. Note that the 2.0 firmware must also be installed on the mixer in order for these new features to be available. Visit qsc.com for details on mixer firmware updates, connections and compatible control surfaces. 2.0.6 06/10/2019 * This version adds a gain-sharing Automatic Microphone Mixer (AMM). Automatic Microphone Mixers are most commonly used for speech applications such as conferences, presentations or panel discussions in which there are multiple talkers and multiple microphones. An Auto Mixer will reduce feedback and minimize extraneous noise (such as paper rustling from panelists or HVAC) by allocating gain to microphone channels with active talkers while reducing the gain of unused channels. The TouchMix-30 Automatic Microphone Mixer (Auto Mixer) is a gain sharing design that is available for all 24 mic/line input channels. 1.3.5 06/19/2018 Support for new TouchMix-30 features (See Release Notes). Various minor bug fixes and refinements. 1.2.9 10/31/2017 * Support for new TouchMix-30 features. * Smartphone Record/Playback screen now features large buttons and display making it very useful as a remote transport control. * The tablet sidebar layout has been improved and the nudge up/down buttons have been increased in size for better usability. * Added iPad battery charge indicator status bar. * Fixed a problem that required the FX Mute to be pushed twice in order to disengage. * Fixed an issue that allowed an iPhone user continued access to User Buttons after remote settings permission has been turned off. 1.2.6 08/17/2017 * The 1.2 release of TouchMix-30 Control supports new features that require the installation of version 1.2 software on the TouchMix-30. The mixer software is available at www.qsc.com . * Updated graphics and refined layout. * The Parametric Equalizer (PEQ) screens now expand to occupy the RTA area when the RTA is disengaged. * Tablet Follows Mixer – When in Follow Mixer mode, touching any fader on the mixer will cause the tablet to display the channel screen associated with that fader. * Speaker presets for QSC E-Series and K.2 loudspeakers. * The Monitor pop-up now includes delay settings and source selection buttons as well as a vertical fader for level control. The Phones / Cue Level pop-up also has been changed to a vertical fader. * Channel Safe prevents designated channels from changing when a scene is recalled. * The "Omit Levels” function on the Preset page now also omits group assignments. Presets can be recalled without effecting mute group, sub group and DCA group assignments. * Tap Tempo for delay effects is now supported on the app. * Updated Info System (built in Owner’s Manual) to include new and improved features. 1.2.2 06/07/2017 •This release incorporates a number of new mixer features that require the installation of version 1.1.07562 on the TouchMix-30 Pro. Go to www.qsc.com for the latest version. •Improvements to the Channel EQ page have been made. The channel PEQ screen now expands to occupy RTA area when RTA is disabled, a pinch gesture now controls Q on all PEQ graph displays and the EQ node selection on the touch screen is improved. •Added “Channel Safe” function that prevents an individual channel’s settings from being changed by a scene recall. The function is accessible from the channel setup page or from the Menu page. •The "Omit levels” function on the Preset page now also omits group assignments. Presets can now be recalled without effecting mute group, sub group and DCA group assignments. •The Monitor pop-up now includes delay settings and source selection buttons as well as a vertical fader for level control. The Phones / Cue Level pop-up also has been changed to a vertical fader. •Added balance control to FX returns. •Added FX device icons to the FX selector pop-up. •Tapping on an Aux name on the auxes tab now navigates to the overview of the aux. •Updated the appearance and organization of Mixer Setup page. •Made appearance improvements to Menu page, Mixer Setup page, Network Setup page and Security Setup / Login pages. •Includes updates to Info System. •Improved tablet/smartphone operation when switching between 2 different mixers. •Changed all FX send default routing to post fader. •Subgroups by default are now assigned to L/R Main. •Channels muted via DCA or Mute Group now properly update button status when mute is operated remotely. •Improved USB drive format utility to properly format a drive previously formatted with an unrecognized file system (like NTFS). •Improved multi-track recording / playback stability. •Improved network discovery when using DHCP, especially after a recent router or mixer reboot. 1.1.5 01/12/2017 1.0 09/27/2016

---

Previous Versions

Here you can find the changelog of TouchMix-30 Control since it was posted on our website on 2016-11-02 22:15:54. The latest version is 3.0.34 and it was updated on 2026-06-27 05:12:33. See below the changes in each version.

---

Related Apps

Here you can find apps that are similar with TouchMix-30 Control.

---

Disclaimer