should close nushell#10549 

# Description
this PR is twofold
- uses `to nuon --raw` in the error messages to make sure nushell#10549 is
solved and makes a difference between `"1"` and `1`
- tries to introduce slightly better errors, i.e. by putting left /
right on new lines => this should hopefully help when the values become
a bit big 😋

# User-Facing Changes
the original issue:
```nushell
> assert equal {one:1 two:2} {one:"1" two:"2"}
Error:   × Assertion failed.
   ╭─[entry #3:1:1]
 1 │ assert equal {one:1 two:2} {one:"1" two:"2"}
   ·              ───────────────┬───────────────
   ·                             ╰── These are not equal.
        Left  : '{one: 1, two: 2}'
        Right : '{one: "1", two: "2"}'
   ╰────
```

a sample for all the assertions and their new messages
```nushell
> assert equal {one:1 two:2} {one:"1" two:"2"}
Error:   × Assertion failed.
   ╭─[entry #3:1:1]
 1 │ assert equal {one:1 two:2} {one:"1" two:"2"}
   ·              ───────────────┬───────────────
   ·                             ╰── These are not equal.
        Left  : '{one: 1, two: 2}'
        Right : '{one: "1", two: "2"}'
   ╰────
```
```nushell
> assert equal 1 2
Error:   × Assertion failed.
   ╭─[entry #4:1:1]
 1 │ assert equal 1 2
   ·              ─┬─
   ·               ╰── These are not equal.
        Left  : '1'
        Right : '2'
   ╰────
```
```nushell
> assert less 3 1
Error:   × Assertion failed.
   ╭─[entry #6:1:1]
 1 │ assert less 3 1
   ·             ─┬─
   ·              ╰── The condition *left < right* is not satisfied.
        Left  : '3'
        Right : '1'
   ╰────
```
```nushell
> assert less or equal 3 1
Error:   × Assertion failed.
   ╭─[entry #7:1:1]
 1 │ assert less or equal 3 1
   ·                      ─┬─
   ·                       ╰── The condition *left <= right* is not satisfied.
        Left  : '3'
        Right : '1'
   ╰────
```
```nushell
> assert greater 1 3
Error:   × Assertion failed.
   ╭─[entry nushell#8:1:1]
 1 │ assert greater 1 3
   ·                ─┬─
   ·                 ╰── The condition *left > right* is not satisfied.
        Left  : '1'
        Right : '3'
   ╰────
```
```nushell
> assert greater or equal 1 3
Error:   × Assertion failed.
   ╭─[entry nushell#9:1:1]
 1 │ assert greater or equal 1 3
   ·                         ─┬─
   ·                          ╰── The condition *left < right* is not satisfied.
        Left  : '1'
        Right : '3'
   ╰────
```
```nushell
> assert length [1 2 3] 2
Error:   × Assertion failed.
   ╭─[entry nushell#10:1:1]
 1 │ assert length [1 2 3] 2
   ·               ────┬────
   ·                   ╰── This does not have the correct length:
        value    : [1, 2, 3]
        length   : 3
        expected : 2
   ╰────
```
```nushell
> assert length [1 "2" 3] 2
Error:   × Assertion failed.
   ╭─[entry nushell#11:1:1]
 1 │ assert length [1 "2" 3] 2
   ·               ─────┬─────
   ·                    ╰── This does not have the correct length:
        value    : [1, "2", 3]
        length   : 3
        expected : 2
   ╰────
```
```nushell
> assert str contains "foo" "bar"
Error:   × Assertion failed.
   ╭─[entry nushell#13:1:1]
 1 │ assert str contains "foo" "bar"
   ·                     ─────┬─────
   ·                          ╰── This does not contain '($right)'.
        value: "foo"
   ╰────
```

# Tests + Formatting

# After Submitting

# Description

This PR updates the `char` command to allow `Table` output due to the
`--list` parameter.

### Before
```nushell
char --list | transpose
Error: nu::parser::input_type_mismatch

  × Command does not support string input.
   ╭─[entry #6:1:1]
 1 │ char --list | transpose
   ·               ────┬────
   ·                   ╰── command doesn't support string input
   ╰────
```

### After
```nushell
❯ char --list | transpose
╭───┬───────────┬─────────┬─────────┬─────────┬───────────┬─────────┬─────────────┬─────────┬─────────┬─────────┬──────────┬──────────┬──────────┬────────────┬──────────┬─────────────┬──────────┬────────────┬──────────┬──────────┬─────╮
│ # │  column0  │ column1 │ column2 │ column3 │  column4  │ column5 │   column6   │ column7 │ column8 │ column9 │ column10 │ column11 │ column12 │  column13  │ column14 │  column15   │ column16 │  column17  │ column18 │ column19 │ ... │
├───┼───────────┼─────────┼─────────┼─────────┼───────────┼─────────┼─────────────┼─────────┼─────────┼─────────┼──────────┼──────────┼──────────┼────────────┼──────────┼─────────────┼──────────┼────────────┼──────────┼──────────┼─────┤
│ 0 │ name      │ newline │ enter   │ nl      │ line_feed │ lf      │ carriage_re │ cr      │ crlf    │ tab     │ sp       │ space    │ pipe     │ left_brace │ lbrace   │ right_brace │ rbrace   │ left_paren │ lp       │ lparen   │ ... │
│   │           │         │         │         │           │         │ turn        │         │         │         │          │          │          │            │          │             │          │            │          │          │     │
│ 1 │ character │         │         │         │           │         │             │         │         │         │          │          │ |        │ {          │ {        │ }           │ }        │ (          │ (        │ (        │ ... │
│   │           │         │         │         │           │         │             │         │         │         │          │          │          │            │          │             │          │            │          │          │     │
│ 2 │ unicode   │ a       │ a       │ a       │ a         │ a       │ d           │ d       │ d a     │ 9       │ 20       │ 20       │ 7c       │ 7b         │ 7b       │ 7d          │ 7d       │ 28         │ 28       │ 28       │ ... │
╰───┴───────────┴─────────┴─────────┴─────────┴───────────┴─────────┴─────────────┴─────────┴─────────┴─────────┴──────────┴──────────┴──────────┴────────────┴──────────┴─────────────┴──────────┴────────────┴──────────┴──────────┴─────╯
```

# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->

# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library

> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->

# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->

…ushell#11569)

# Description
Fixes: nushell#11455

### For arguments which is annotated with `:path/:directory/:glob`
To fix the issue, we need to have a way to know if a path is originally
quoted during runtime. So the information needed to be added at several
levels:
* parse time (from user input to expression)
We need to add quoted information into `Expr::Filepath`,
`Expr::Directory`, `Expr::GlobPattern`
* eval time
When convert from `Expr::Filepath`, `Expr::Directory`,
`Expr::GlobPattern` to `Value::String` during runtime, we won't auto
expanded the path if it's quoted

### For `ls`
It's really special, because it accepts a `String` as a pattern, and it
generates `glob` expression inside the command itself.

So the idea behind the change is introducing a special SyntaxShape to
ls: `SyntaxShape::LsGlobPattern`. So we can track if the pattern is
originally quoted easier, and we don't auto expand the path either.

Then when constructing a glob pattern inside ls, we check if input
pattern is quoted, if so: we escape the input pattern, so we can run `ls
a[123]b`, because it's already escaped.
Finally, to accomplish the checking process, we also need to introduce a
new value type called `Value::QuotedString` to differ from
`Value::String`, it's used to generate an enum called `NuPath`, which is
finally used in `ls` function. `ls` learned from `NuPath` to know if
user input is quoted.

# User-Facing Changes
Actually it contains several changes
### For arguments which is annotated with `:path/:directory/:glob`
#### Before
```nushell
> def foo [p: path] { echo $p }; print (foo "~/a"); print (foo '~/a')
/home/windsoilder/a
/home/windsoilder/a
> def foo [p: directory] { echo $p }; print (foo "~/a"); print (foo '~/a')
/home/windsoilder/a
/home/windsoilder/a
> def foo [p: glob] { echo $p }; print (foo "~/a"); print (foo '~/a')
/home/windsoilder/a
/home/windsoilder/a
```
#### After
```nushell
> def foo [p: path] { echo $p }; print (foo "~/a"); print (foo '~/a')
~/a
~/a
> def foo [p: directory] { echo $p }; print (foo "~/a"); print (foo '~/a')
~/a
~/a
> def foo [p: glob] { echo $p }; print (foo "~/a"); print (foo '~/a')
~/a
~/a
```
### For ls command
`touch '[uwu]'`
#### Before
```
❯ ls -D "[uwu]"
Error:   × No matches found for [uwu]
   ╭─[entry #6:1:1]
 1 │ ls -D "[uwu]"
   ·       ───┬───
   ·          ╰── Pattern, file or folder not found
   ╰────
  help: no matches found
```

#### After
```
❯ ls -D "[uwu]"
╭───┬───────┬──────┬──────┬──────────╮
│ # │ name  │ type │ size │ modified │
├───┼───────┼──────┼──────┼──────────┤
│ 0 │ [uwu] │ file │  0 B │ now      │
╰───┴───────┴──────┴──────┴──────────╯
```

# Tests + Formatting
Done

# After Submitting
NaN