Skip to content

[FW][FIX] stock: couldn't unreserve mixed tracking stock#93141

Closed
fw-bot wants to merge 1 commit intoodoo:masterfrom
odoo-dev:master-15.0-fix-mix-reservation-arm-_in_-fw
Closed

[FW][FIX] stock: couldn't unreserve mixed tracking stock#93141
fw-bot wants to merge 1 commit intoodoo:masterfrom
odoo-dev:master-15.0-fix-mix-reservation-arm-_in_-fw

Conversation

@fw-bot
Copy link
Copy Markdown
Contributor

@fw-bot fw-bot commented Jun 8, 2022

  • Install stock

  • Go to Inventory > Configuration > Settings and enable "Lots" and "Storage Locations"

  • Create a Product tracked By Lots (i.e. Product X)

  • Go to Inventory > Operations > Inventory Adjustments

  • Create an Inventory Adjustment for Product X:

    Product | Location | Lot/SN | Real Quantity


Product X  |   WH/Stock   |   LOT 01   |       20
Product X  |   WH/Stock   |            |       10
  • Validate Inventory
  • Go to Inventory > Operations > Transfers and create one:
    • Source Location: WH/Stock
    • Destination Location: WH/Stock/Shelf1
    • Operation Type: Internal Transfers
    • Operations:
      [Product: Product X, Initial Demand: 25]
  • Save Transfer, Mark As Todo and Check availability
  • Click on list icon of Operation line for Product X to display Detailed Operations
  • 20 units of LOT 01 and 5 units without lot have been reserved
  • Set LOT 01 for the 5 reserved units without lot and confirm
  • Open Detailed Operations again
  • There are now 20 units of LOT 01 and 5 units of LOT 01
  • Remove the row with 5 units and confirm
  • Check availability and open Detailed Operation
  • There is now only a row with 25 reserved units of LOT 01
  • Unreserve
    The following errror is raised:
    "It is not possible to unreserve more products of P than you have in stock."

It happens because the system is not able to manage quants with lots and
wihtout lots at the same time. When modifying the move line to 25
reserved units. It's composed of 20 quants with lot and 5 quants without
lot. And when unreserving it will check if there is a quants with 25
units with the lot and if it's not found 25 units without lot. But never
25 units of quants with lots and without lots.

opw-2419444

Close #64497

closes #66029

X-original-commit: 217c76b
Signed-off-by: Arnold Moyaux amoyaux@users.noreply.github.com

Description of the issue/feature this PR addresses:

Current behavior before PR:

Desired behavior after PR is merged:

--
I confirm I have signed the CLA and read the PR guidelines at www.odoo.com/submit-pr

Forward-Port-Of: #91632
Forward-Port-Of: #90633

- Install stock
- Go to Inventory > Configuration > Settings and enable "Lots" and "Storage Locations"
- Create a Product tracked By Lots (i.e. Product X)
- Go to Inventory > Operations > Inventory Adjustments
- Create an Inventory Adjustment for Product X:

     Product   |   Location   |   Lot/SN   |   Real Quantity
 -------------------------------------------------------------
    Product X  |   WH/Stock   |   LOT 01   |       20
    Product X  |   WH/Stock   |            |       10

- Validate Inventory
- Go to Inventory > Operations > Transfers and create one:
  * Source Location: WH/Stock
  * Destination Location: WH/Stock/Shelf1
  * Operation Type: Internal Transfers
  * Operations:
    [Product: Product X, Initial Demand: 25]
- Save Transfer, Mark As Todo and Check availability
- Click on list icon of Operation line for Product X to display Detailed Operations
- 20 units of LOT 01 and 5 units without lot have been reserved
- Set LOT 01 for the 5 reserved units without lot and confirm
- Open Detailed Operations again
- There are now 20 units of LOT 01 and 5 units of LOT 01
- Remove the row with 5 units and confirm
- Check availability and open Detailed Operation
- There is now only a row with 25 reserved units of LOT 01
- Unreserve
The following errror is raised:
"It is not possible to unreserve more products of P than you have in stock."

It happens because the system is not able to manage quants with lots and
wihtout lots at the same time. When modifying the move line to 25
reserved units. It's composed of 20 quants with lot and 5 quants without
lot. And when unreserving it will check if there is a quants with 25
units with the lot and if it's not found 25 units without lot. But never
25 units of quants with lots and without lots.

opw-2419444

Close odoo#64497

closes odoo#66029

X-original-commit: 83d55d8
Signed-off-by: Arnold Moyaux <amoyaux@users.noreply.github.com>
@robodoo
Copy link
Copy Markdown
Contributor

robodoo commented Jun 8, 2022

Pull request status dashboard

@fw-bot
Copy link
Copy Markdown
Contributor Author

fw-bot commented Jun 8, 2022

Ping @amoyaux
This PR targets master and is the last of the forward-port chain containing:

To merge the full chain, say

@fw-bot r+

More info at https://github.com/odoo/odoo/wiki/Mergebot#forward-port

@robodoo robodoo added the forwardport This PR was created by @fw-bot label Jun 8, 2022
@C3POdoo C3POdoo added the OE the report is linked to a support ticket (opw-...) label Jun 8, 2022
@amoyaux
Copy link
Copy Markdown
Contributor

amoyaux commented Jun 10, 2022

@fw-bot r+

robodoo pushed a commit that referenced this pull request Jun 10, 2022
- Install stock
- Go to Inventory > Configuration > Settings and enable "Lots" and "Storage Locations"
- Create a Product tracked By Lots (i.e. Product X)
- Go to Inventory > Operations > Inventory Adjustments
- Create an Inventory Adjustment for Product X:

     Product   |   Location   |   Lot/SN   |   Real Quantity
 -------------------------------------------------------------
    Product X  |   WH/Stock   |   LOT 01   |       20
    Product X  |   WH/Stock   |            |       10

- Validate Inventory
- Go to Inventory > Operations > Transfers and create one:
  * Source Location: WH/Stock
  * Destination Location: WH/Stock/Shelf1
  * Operation Type: Internal Transfers
  * Operations:
    [Product: Product X, Initial Demand: 25]
- Save Transfer, Mark As Todo and Check availability
- Click on list icon of Operation line for Product X to display Detailed Operations
- 20 units of LOT 01 and 5 units without lot have been reserved
- Set LOT 01 for the 5 reserved units without lot and confirm
- Open Detailed Operations again
- There are now 20 units of LOT 01 and 5 units of LOT 01
- Remove the row with 5 units and confirm
- Check availability and open Detailed Operation
- There is now only a row with 25 reserved units of LOT 01
- Unreserve
The following errror is raised:
"It is not possible to unreserve more products of P than you have in stock."

It happens because the system is not able to manage quants with lots and
wihtout lots at the same time. When modifying the move line to 25
reserved units. It's composed of 20 quants with lot and 5 quants without
lot. And when unreserving it will check if there is a quants with 25
units with the lot and if it's not found 25 units without lot. But never
25 units of quants with lots and without lots.

opw-2419444

Close #64497

closes #66029

closes #93141

X-original-commit: 83d55d8
Signed-off-by: Arnold Moyaux <amoyaux@users.noreply.github.com>
Signed-off-by: Arnold Moyaux (arm) <arm@odoo.com>
@robodoo robodoo closed this Jun 10, 2022
@robodoo robodoo temporarily deployed to merge June 10, 2022 09:26 Inactive
@robodoo robodoo added the 15.5 label Jun 10, 2022
@fw-bot fw-bot deleted the master-15.0-fix-mix-reservation-arm-_in_-fw branch June 24, 2022 09:46
@xmo-odoo xmo-odoo added 16.0 and removed 15.5 labels Nov 27, 2025
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Labels

16.0 forwardport This PR was created by @fw-bot OE the report is linked to a support ticket (opw-...)

Projects

None yet

Development

Successfully merging this pull request may close these issues.

5 participants