Rejects
No Reject
This configuration is used when rejected product needs to be handled outside the inspection system.
Reversing Reject
The Reversing Reject briefly reverses the conveyor belt to discharge product into a reject area below
Retracting Belt Reject
The Retracting Belt Reject briefly pulls back the end of the belt, creating a gap that allows the product to drop into a reject bin or chute.
Overhead Sweep Reject
The Overhead Sweep Reject removes contaminated products from the line using a paddle mounted above the conveyor.
Bi-directional Sweep Reject
The Bi-Directional Sweep Reject removes contaminated products by using a mechanical actuated overhead paddle to reject the product.
Heavy-duty Kicker Reject
The Heavy-Duty Kicker Reject is built to remove large, heavy products from the line using a controlled mechanical push.
Kicker Reject
The Kicker Reject is designed to remove packaged products from the line using a pneumatic actuator automatically.
Lift-Nose Reject System
the Lift-Nose Reject System removes contaminated items by lifting the infeed belt and directing them into a reject area below.
Flap Gate Reject
The Flap Gate reject uses a pivoting flap to redirect contaminated product away from the main flow.
Drop-nose Reject
The drop-nose reject uses a downward drop to separate out-of-spec product.
Diverter Reject
A mechanical reject option that redirects non-conforming products without stopping the line.
Belt Stop Alarm Reject
A Belt Stop Alarm reject brings the conveyor to a halt and alerts the operator.
Air Blast Reject
A fast, controlled burst of air removes lightweight products from the belt without stopping your line.
