About DMXcat®
DMXcat(R) makes it easy for anyone to control, analyze, or test any DMX lighting fixture, whether it’s a simple LED PAR or a complex moving light. The system consists of a small hardware dongle (purchased separately) and...
DMXcat(R) makes it easy for anyone to control, analyze, or test any DMX lighting fixture, whether it’s a simple LED PAR or a complex moving light. The system consists of a small hardware dongle (purchased separately) and a suite of free mobile applications. Together, they combine to bring wireless DMX and RDM control plus other useful lighting functions to the user’s smartphone. The DMXcat solves the problem faced by all users of modern lighting equipment: How to turn on and test DMX lighting gear without using a complicated lighting console. DMXcat app is now available in seven languages: Spanish, French, German, Italian, Korean, Japanese, and English. Software Applications There are currently five apps available for use with the DMXcat system: .DMX Controller: A single universe (512) DMX channel controller with two user interfaces (sliders or keypad). .Fixture Controller: Controls multi-attribute fixtures from a built in database. .RDM Controller: For bi-directional communication and control of RDM enabled devices. .DMX Tester: Analyze and adjust settings for transmitting or receiving DMX. .DIP switch calculator: Simplifies the configuring of DIP switches used for setting DMX addresses. Hardware The DMXcat’s hardware interface is a compact battery powered device which fits easily in a pocket or tool pouch or may be worn on a belt. It uses Bluetooth LE technology for communication with the smartphone applications (up to 50’ range). Without the limitations of being physically connected, the user can move about the workspace as needed with their smartphone and run the various apps while still using the phone for on-the-job communication. The device’s five pin XLRF connector/cable assembly allows it to be connected to a point in a DMX data chain to test or control of the various DMX/RDM functions. It is charged using a standard USB to Micro-USB cable and charger. Other features include a built-in LED flashlight, an audible alarm for locating a misplaced unit, XLR5M to XLR5M Turnaround, LED status indicator, and a removable belt clip with a split ring safety point. Optional accessories include XLR5M to RJ45 Adapter, XLR5M to XLR3F Adapter, XLR5M to XLR3M Turnaround, and a Belt Pouch.
Version History Fixed Issues: Renaming dongle causes the dongle to disappear from connection scans App would ask for a PIN when none is required App would allow duplicate channel names in personality editor Not all files types were sharable in the file share screen New Features: Redesigned File Share Screen to list view so file names are more readable Flicker Finder is now implemented 2.1.0.9.0.0 04/09/2025 Added ability to rename DMXcat-E from BLE device list screen, while connected Fixed Following DMXcat-E Issues: Art-Net DMX sources would only show the first two slots Setting DMX preset would not take affect until another DMX change Too many streaming ACN sources could crash device Battery percentage would not always refresh Streaming ACN would output at 1000Hz Multi-fixture control would only control the first fixture in a group XLR testing for 3 pin cables only showed pass for cables with all 5 pins wired DMX sources would not always go away in View Levels when removed DMX timings could show incorrect wired refresh rate Known DMXcat-E Issues: Viewing DMX timings sometimes shows incorrect mark/break times. Refresh rate will be correct. Flicker finder not implemented 2.0.0.9.0.164 02/28/2025 Fixed Issues: Connecting to DMXcat-E too early after boot could cause it to crash Boot load disconnections View Levels for XLR input Timings for XLR input Known Issues: When removing DMX input from XLR, may take minutes for app to display no signal DMX timings may appear incorrect for 1/4s 2.0.0.9.0.96 01/22/2025 Fixed Issues: Boot load disconnections View Levels for XLR input Timings for XLR input Known Issues: When removing DMX input from XLR, may take minutes for app to display no signal DMX timings may appear incorrect for 1/4s 2.0.0.9.0.91 01/18/2025 Fixes bugs with incorrect labels for members within Ping Groups Fixes potential issues when updating the DMXcat-E Secondary Firmware Adds the device serial number to Problem Reports 2.0.0.9.0.26 12/06/2024 Fixed issue where wired DMX/RDM could crash DMXcat-E 2.0.0.9.0.16 11/27/2024 Added functionality for DMXcat-E Added Share Files feature Fixed Personality Editor bugs 2.0.0.9.0.0 11/27/2024 Fixed DMXcat slots per packet issue when using Max Speed mode. Fixed issue where users must select the Transmitter app twice to configure the transmitter. Fixed issue where pressing the increment button could cause value to increase indefinitely. 1.5.4.9.0.726 09/12/2023 v1.5.2.9.0.315 Fixed database connection issue Fixed graphical issue in fixture controller v1.5.2.9.0.159 Improved compatibility of RDM controller v1.5.2.9.0.98 Fixed receive DMX function not detecting DMX Fix DMX button from RDM controller not working properly in rare cases Small stability fixes 1.5.2.9.0.315 10/02/2022 v1.5.2.9.0.159 Improved compatibility of RDM controller v1.5.2.9.0.98 Fixed receive DMX function not detecting DMX Fix DMX button from RDM controller not working properly in rare cases Small stability fixes v1.5.1.9.0.68 Fixed reading levels if slots were at full when opening the view levels screen Fixed universe status screen for Multiverse Transmitter Fixed enumerated manufacturer specific PIDs for sub-devices Added debug log report Fix bug with RDM sensor data 1.5.2.9.0.159 06/19/2022 v1.5.2.9.0.138 Improved compatibility of RDM controller v1.5.2.9.0.98 Fixed receive DMX function not detecting DMX Fix DMX button from RDM controller not working properly in rare cases Small stability fixes v1.5.1.9.0.68 Fixed reading levels if slots were at full when opening the view levels screen Fixed universe status screen for Multiverse Transmitter Fixed enumerated manufacturer specific PIDs for sub-devices Added debug log report Fix bug with RDM sensor data 1.5.2.0.138 06/15/2022 v1.5.2.9.0.98 Fixed receive DMX function not detecting DMX Fix DMX button from RDM controller not working properly in rare cases Small stability fixes v1.5.1.9.0.68 Fixed reading levels if slots were at full when opening the view levels screen Fixed universe status screen for Multiverse Transmitter Fixed enumerated manufacturer specific PIDs for sub-devices Added debug log report Fix bug with RDM sensor data 1.5.2.9.0.98 03/24/2022 v1.5.1.9.0.68 Fixed reading levels if slots were at full when opening the view levels screen Fixed universe status screen for Multiverse Transmitter Fixed enumerated manufacturer specific PIDs for sub-devices Added debug log report Fix bug with RDM sensor data v1.5.0.9.0.33 Fixed sensors screen for Multiverse Dimmers v1.5.0.9.0.30 Improve RDM discovery stability 1.5.1.9.0.68 02/15/2022 Fixed sensors screen for 5942 1.5.0.9.0.33 01/14/2022 Improve RDM discovery stability Improve RDM fault tolerance 1.5.0.9.0.31 01/09/2022 Improve RDM discovery stability 1.5.0.9.0.30 01/06/2022 v1.5.0.9.0.15 RDM Controller - Improved multiple fixture RDM control - Added support for status messages - Added support for preset playback - Added personality list to the quick settings dialog Fixture Controller - Added ability to show more than 6 encoders on big screens - Added visualization of color temperature on CCT channels for some fixtures (currently only ARRI SkyPanel, will increase in the future) - Added preset playback screen - Added search dialog for the fixture database 1.5.0.9.0.15 10/23/2021 v1.5.0.9.0.14 RDM Controller - Improved multiple fixture RDM control - Added support for status messages - Added support for preset playback - Added personality list to the quick settings dialog Fixture Controller - Added ability to show more than 6 encoders on big screens - Added visualization of color temperature on CCT channels for some fixtures (currently only ARRI SkyPanel, will increase in the future) - Added preset playback screen - Added search dialog for the fixture database 1.5.0.9.0.14 10/13/2021 v1.5.0.9.0.12 RDM Controller - Improved multiple fixture RDM control - Added support for status messages - Added support for preset playback - Added personality list to the quick settings dialog Fixture Controller - Added ability to show more than 6 encoders on big screens - Added visualization of color temperature on CCT channels for some fixtures (currently only ARRI SkyPanel, will increase in the future) - Added preset playback screen - Added search dialog for the fixture database 1.5.0.9.0.12 10/06/2021 v1.5.0.9.0.7 RDM Controller - Improved multiple fixture RDM control - Added support for status messages - Added support for preset playback - Added personality list to the quick settings dialog Fixture Controller - Added ability to show more than 6 encoders on big screens - Added visualization of color temperature on CCT channels for some fixtures (currently only ARRI SkyPanel, will increase in the future) - Added preset playback screen - Added search dialog for the fixture database 1.5.0.9.0.7 09/28/2021 v1.5.0.9.0.6 RDM Controller - Improved multiple fixture RDM control - Added support for status messages - Added support for preset playback - Added personality list to the quick settings dialog Fixture Controller - Added ability to show more than 6 encoders on big screens - Added visualization of color temperature on CCT channels for some fixtures (currently only ARRI SkyPanel, will increase in the future) - Added preset playback screen - Added search dialog for the fixture database 1.5.0.9.0.6 09/21/2021 1.4.0.9.0.688 Fixed bugs in the firmware update process v1.4.0.9.0.610 Fixed Multiverse Transmitter compatibility v1.4.0.9.0.607 Fixed bug that prevented new presets/favorites/dmx setups to be saved v1.4.0.9.0.600 Fixed issue with bluetooth discovery v1.4.0.9.0.590 Fixed bug in auto off of the DMXcat dongle Fixed bug in setting the DMX out timings v1.4.0.9.0.581 Fixed bug with translations 1.4.0.9.0.688 04/01/2021 v1.4.0.9.0.610 Fixed Multiverse Transmitter compatibility v1.4.0.9.0.607 Fixed bug that prevented new presets/favorites/dmx setups to be saved v1.4.0.9.0.590 Fixed bug in auto off of the DMXcat dongle Fixed bug in setting the DMX out timings v1.4.0.9.0.581 Fixed bug with translations 1.4.0.9.0.610 12/03/2020 v1.4.0.9.0.589 Fix bug in auto off of the DMXcat dongle Fix bug in setting the DMX out timings v1.4.0.9.0.581 Fixed bug with translations v1.4.0.9.0.569 Fix preset menu scrolling Added support for LOCK_STATE/LOCK_STATE_DESCRIPTION PIDs Fix personality editor bugs when saving personalities Change the presets, favorites and DMX patches filenames to human readable Update E1.37-7 PIDs support Improved stability v1.4.0.9.0.359 Fixed bug with certain types of manufacturer specific PIDs 1.4.0.9.0.590 11/11/2020 v1.4.0.9.0.581 Fixed bug with translations v1.4.0.9.0.569 Fix preset menu scrolling Added support for LOCK_STATE/LOCK_STATE_DESCRIPTION PIDs Fix personality editor bugs when saving personalities Change the presets, favorites and DMX patches filenames to human readable Update E1.37-7 PIDs support Improved stability v1.4.0.9.0.359 Fixed bug with certain types of manufacturer specific PIDs v1.4.0.9.0.325 Fixed translations of some dialog windows buttons 1.4.0.9.0.581 11/05/2020
Previous Versions
Here you can find the changelog of DMXcat® since it was posted on our website on 2021-12-14 05:40:12.
The latest version is 2.1.0.9.0.0 and it was updated on 2026-06-27 03:51:25. See below the changes in each version.
DMXcat® version 2.1.0.9.0.0
Updated At: 2026-06-06
Changes: Version History Fixed Issues:
Renaming dongle causes the dongle to disappear from connection scans
App would ask for a PIN when none is required
App would allow duplicate channel names in personality editor
Not all files types were sharable in the file share screen
New Features:
Redesigned File Share Screen to list view so file names are more readable
Flicker Finder is now implemented 2.1.0.9.0.0 04/09/2025 Added ability to rename DMXcat-E from BLE device list screen, while connected
Fixed Following DMXcat-E Issues:
Art-Net DMX sources would only show the first two slots
Setting DMX preset would not take affect until another DMX change
Too many streaming ACN sources could crash device
Battery percentage would not always refresh
Streaming ACN would output at 1000Hz
Multi-fixture control would only control the first fixture in a group
XLR testing for 3 pin cables only showed pass for cables with all 5 pins wired
DMX sources would not always go away in View Levels when removed
DMX timings could show incorrect wired refresh rate
Known DMXcat-E Issues:
Viewing DMX timings sometimes shows incorrect mark/break times. Refresh rate will be correct.
Flicker finder not implemented 2.0.0.9.0.164 02/28/2025 Fixed Issues:
Connecting to DMXcat-E too early after boot could cause it to crash
Boot load disconnections
View Levels for XLR input
Timings for XLR input
Known Issues:
When removing DMX input from XLR, may take minutes for app to display no signal
DMX timings may appear incorrect for 1/4s 2.0.0.9.0.96 01/22/2025 Fixed Issues:
Boot load disconnections
View Levels for XLR input
Timings for XLR input
Known Issues:
When removing DMX input from XLR, may take minutes for app to display no signal
DMX timings may appear incorrect for 1/4s 2.0.0.9.0.91 01/18/2025 Fixes bugs with incorrect labels for members within Ping Groups
Fixes potential issues when updating the DMXcat-E Secondary Firmware
Adds the device serial number to Problem Reports 2.0.0.9.0.26 12/06/2024 Fixed issue where wired DMX/RDM could crash DMXcat-E 2.0.0.9.0.16 11/27/2024 Added functionality for DMXcat-E
Added Share Files feature
Fixed Personality Editor bugs 2.0.0.9.0.0 11/27/2024 Fixed DMXcat slots per packet issue when using Max Speed mode.
Fixed issue where users must select the Transmitter app twice to configure the transmitter.
Fixed issue where pressing the increment button could cause value to increase indefinitely. 1.5.4.9.0.726 09/12/2023 v1.5.2.9.0.315
Fixed database connection issue
Fixed graphical issue in fixture controller
v1.5.2.9.0.159
Improved compatibility of RDM controller
v1.5.2.9.0.98
Fixed receive DMX function not detecting DMX
Fix DMX button from RDM controller not working properly in rare cases
Small stability fixes 1.5.2.9.0.315 10/02/2022 v1.5.2.9.0.159
Improved compatibility of RDM controller
v1.5.2.9.0.98
Fixed receive DMX function not detecting DMX
Fix DMX button from RDM controller not working properly in rare cases
Small stability fixes
v1.5.1.9.0.68
Fixed reading levels if slots were at full when opening the view levels screen
Fixed universe status screen for Multiverse Transmitter
Fixed enumerated manufacturer specific PIDs for sub-devices
Added debug log report
Fix bug with RDM sensor data 1.5.2.9.0.159 06/19/2022 v1.5.2.9.0.138
Improved compatibility of RDM controller
v1.5.2.9.0.98
Fixed receive DMX function not detecting DMX
Fix DMX button from RDM controller not working properly in rare cases
Small stability fixes
v1.5.1.9.0.68
Fixed reading levels if slots were at full when opening the view levels screen
Fixed universe status screen for Multiverse Transmitter
Fixed enumerated manufacturer specific PIDs for sub-devices
Added debug log report
Fix bug with RDM sensor data 1.5.2.0.138 06/15/2022 v1.5.2.9.0.98
Fixed receive DMX function not detecting DMX
Fix DMX button from RDM controller not working properly in rare cases
Small stability fixes
v1.5.1.9.0.68
Fixed reading levels if slots were at full when opening the view levels screen
Fixed universe status screen for Multiverse Transmitter
Fixed enumerated manufacturer specific PIDs for sub-devices
Added debug log report
Fix bug with RDM sensor data 1.5.2.9.0.98 03/24/2022 v1.5.1.9.0.68
Fixed reading levels if slots were at full when opening the view levels screen
Fixed universe status screen for Multiverse Transmitter
Fixed enumerated manufacturer specific PIDs for sub-devices
Added debug log report
Fix bug with RDM sensor data
v1.5.0.9.0.33
Fixed sensors screen for Multiverse Dimmers
v1.5.0.9.0.30
Improve RDM discovery stability 1.5.1.9.0.68 02/15/2022 Fixed sensors screen for 5942 1.5.0.9.0.33 01/14/2022 Improve RDM discovery stability
Improve RDM fault tolerance 1.5.0.9.0.31 01/09/2022 Improve RDM discovery stability 1.5.0.9.0.30 01/06/2022 v1.5.0.9.0.15
RDM Controller
- Improved multiple fixture RDM control
- Added support for status messages
- Added support for preset playback
- Added personality list to the quick settings dialog
Fixture Controller
- Added ability to show more than 6 encoders on big screens
- Added visualization of color temperature on CCT channels for some fixtures (currently only ARRI SkyPanel, will increase in the future)
- Added preset playback screen
- Added search dialog for the fixture database 1.5.0.9.0.15 10/23/2021 v1.5.0.9.0.14
RDM Controller
- Improved multiple fixture RDM control
- Added support for status messages
- Added support for preset playback
- Added personality list to the quick settings dialog
Fixture Controller
- Added ability to show more than 6 encoders on big screens
- Added visualization of color temperature on CCT channels for some fixtures (currently only ARRI SkyPanel, will increase in the future)
- Added preset playback screen
- Added search dialog for the fixture database 1.5.0.9.0.14 10/13/2021 v1.5.0.9.0.12
RDM Controller
- Improved multiple fixture RDM control
- Added support for status messages
- Added support for preset playback
- Added personality list to the quick settings dialog
Fixture Controller
- Added ability to show more than 6 encoders on big screens
- Added visualization of color temperature on CCT channels for some fixtures (currently only ARRI SkyPanel, will increase in the future)
- Added preset playback screen
- Added search dialog for the fixture database 1.5.0.9.0.12 10/06/2021 v1.5.0.9.0.7
RDM Controller
- Improved multiple fixture RDM control
- Added support for status messages
- Added support for preset playback
- Added personality list to the quick settings dialog
Fixture Controller
- Added ability to show more than 6 encoders on big screens
- Added visualization of color temperature on CCT channels for some fixtures (currently only ARRI SkyPanel, will increase in the future)
- Added preset playback screen
- Added search dialog for the fixture database 1.5.0.9.0.7 09/28/2021 v1.5.0.9.0.6
RDM Controller
- Improved multiple fixture RDM control
- Added support for status messages
- Added support for preset playback
- Added personality list to the quick settings dialog
Fixture Controller
- Added ability to show more than 6 encoders on big screens
- Added visualization of color temperature on CCT channels for some fixtures (currently only ARRI SkyPanel, will increase in the future)
- Added preset playback screen
- Added search dialog for the fixture database 1.5.0.9.0.6 09/21/2021 1.4.0.9.0.688
Fixed bugs in the firmware update process
v1.4.0.9.0.610
Fixed Multiverse Transmitter compatibility
v1.4.0.9.0.607
Fixed bug that prevented new presets/favorites/dmx setups to be saved
v1.4.0.9.0.600
Fixed issue with bluetooth discovery
v1.4.0.9.0.590
Fixed bug in auto off of the DMXcat dongle
Fixed bug in setting the DMX out timings
v1.4.0.9.0.581
Fixed bug with translations 1.4.0.9.0.688 04/01/2021 v1.4.0.9.0.610
Fixed Multiverse Transmitter compatibility
v1.4.0.9.0.607
Fixed bug that prevented new presets/favorites/dmx setups to be saved
v1.4.0.9.0.590
Fixed bug in auto off of the DMXcat dongle
Fixed bug in setting the DMX out timings
v1.4.0.9.0.581
Fixed bug with translations 1.4.0.9.0.610 12/03/2020 v1.4.0.9.0.589
Fix bug in auto off of the DMXcat dongle
Fix bug in setting the DMX out timings
v1.4.0.9.0.581
Fixed bug with translations
v1.4.0.9.0.569
Fix preset menu scrolling Added support for LOCK_STATE/LOCK_STATE_DESCRIPTION PIDs Fix personality editor bugs when saving personalities Change the presets, favorites and DMX patches filenames to human readable Update E1.37-7 PIDs support Improved stability
v1.4.0.9.0.359
Fixed bug with certain types of manufacturer specific PIDs 1.4.0.9.0.590 11/11/2020 v1.4.0.9.0.581
Fixed bug with translations
v1.4.0.9.0.569
Fix preset menu scrolling Added support for LOCK_STATE/LOCK_STATE_DESCRIPTION PIDs Fix personality editor bugs when saving personalities Change the presets, favorites and DMX patches filenames to human readable Update E1.37-7 PIDs support Improved stability
v1.4.0.9.0.359
Fixed bug with certain types of manufacturer specific PIDs
v1.4.0.9.0.325
Fixed translations of some dialog windows buttons 1.4.0.9.0.581 11/05/2020
DMXcat® version 2.1.0.9.0.0
Updated At: 2025-04-09
Changes: Apr 9, 2025
Version 2.1.0.9.0.0
Fixed Issues:
Renaming dongle causes the dongle to disappear from connection scans
App would ask for a PIN when none is required
App would allow duplicate channel names in personality editor
Not all files types were sharable in the file share screen
New Features:
Redesigned File Share Screen to list view so file names are more readable
Flicker Finder is now implemented
DMXcat® version 2.1.0.9.0.0
Updated At: 2025-04-09
Changes: Fixed Issues:
Renaming dongle causes the dongle to disappear from connection scans
App would ask for a PIN when none is required
App would allow duplicate channel names in personality editor
Not all files types were sharable in the file share screen
New Features:
Redesigned File Share Screen to list view so file names are more readable
Flicker Finder is now implemented
DMXcat® version 2.0.0.9.0.164
Updated At: 2025-02-28
Changes: Feb 28, 2025
Version 2.0.0.9.0.164
Added ability to rename DMXcat-E from BLE device list screen, while connected
Fixed Following DMXcat-E Issues:
Art-Net DMX sources would only show the first two slots
Setting DMX preset would not take affect until another DMX change
Too many streaming ACN sources could crash device
Battery percentage would not always refresh
Streaming ACN would output at 1000Hz
Multi-fixture control would only control the first fixture in a group
XLR testing for 3 pin cables only showed pass for cables with all 5 pins wired
DMX sources would not always go away in View Levels when removed
DMX timings could show incorrect wired refresh rate
Known DMXcat-E Issues:
Viewing DMX timings sometimes shows incorrect mark/break times. Refresh rate will be correct.
Flicker finder not implemented
DMXcat® version 2.0.0.9.0.96
Updated At: 2025-01-22
Changes: Jan 22, 2025
Version 2.0.0.9.0.96
Fixed Issues:
Connecting to DMXcat-E too early after boot could cause it to crash
Boot load disconnections
View Levels for XLR input
Timings for XLR input
Known Issues:
When removing DMX input from XLR, may take minutes for app to display no signal
DMX timings may appear incorrect for 1/4s
DMXcat® version 2.0.0.9.0.26
Updated At: 2024-12-06
Changes: Dec 6, 2024
Version 2.0.0.9.0.26
Fixes bugs with incorrect labels for members within Ping Groups
Fixes potential issues when updating the DMXcat-E Secondary Firmware
Adds the device serial number to Problem Reports
DMXcat® version 1.5.4.9.0.726
Updated At: 2023-09-12
Changes: Sep 12, 2023
Version 1.5.4.9.0.726
Fixed DMXcat slots per packet issue when using Max Speed mode.
Fixed issue where users must select the Transmitter app twice to configure the transmitter.
Fixed issue where pressing the increment button could cause value to increase indefinitely.
DMXcat® version 1.5.2.9.0.315
Updated At: 2022-10-02
Changes: Oct 2, 2022
Version 1.5.2.9.0.315
v1.5.2.9.0.315
Fixed database connection issue
Fixed graphical issue in fixture controller
v1.5.2.9.0.159
Improved compatibility of RDM controller
v1.5.2.9.0.98
Fixed receive DMX function not detecting DMX
Fix DMX button from RDM controller not working properly in rare cases
Small stability fixes
DMXcat® version 1.5.2.9.0.159
Updated At: 2022-06-19
Changes: Jun 19, 2022 Version 1.5.2.9.0.159
v1.5.2.9.0.159
Improved compatibility of RDM controller
v1.5.2.9.0.98
Fixed receive DMX function not detecting DMX
Fix DMX button from RDM controller not working properly in rare cases
Small stability fixes
v1.5.1.9.0.68
Fixed reading levels if slots were at full when opening the view levels screen
Fixed universe status screen for Multiverse Transmitter
Fixed enumerated manufacturer specific PIDs for sub-devices
Added debug log report
Fix bug with RDM sensor data
DMXcat® version 1.5.2.9.0.98
Updated At: 2022-03-24
Changes: Mar 24, 2022 Version 1.5.2.9.0.98
v1.5.2.9.0.98
Fixed receive DMX function not detecting DMX
Fix DMX button from RDM controller not working properly in rare cases
Small stability fixes
v1.5.1.9.0.68
Fixed reading levels if slots were at full when opening the view levels screen
Fixed universe status screen for Multiverse Transmitter
Fixed enumerated manufacturer specific PIDs for sub-devices
Added debug log report
Fix bug with RDM sensor data
Disclaimer
Official App Store Link
We do not host DMXcat® on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for DMXcat® is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
