About DMXcat(R)
The DMXcat® makes it easy for anyone to control, analyze, or test any DMX lighting fixture, whether it’s a simple LED PAR or a complex moving light. The system consists of a small hardware dongle (purchased separately)...
The DMXcat® makes it easy for anyone to control, analyze, or test any DMX lighting fixture, whether it’s a simple LED PAR or a complex moving light. The system consists of a small hardware dongle (purchased separately) and a suite of free mobile applications. Together, they combine to bring wireless DMX and RDM control plus other useful lighting functions to the user’s smartphone. The DMXcat solves the problem faced by all users of modern lighting equipment: How to turn on and test DMX lighting gear without using a complicated lighting console.
Software Applications
There are currently seven apps available for use with the DMXcat system:
•DMX Controller: A single universe (512) DMX channel controller with two user interfaces (sliders or keypad).
•Fixture Controller: Controls multi-attribute fixtures from a built in database.
•RDM Controller: For bi-directional communication and control of RDM enabled devices.
•DMX Tester: Analyze and adjust settings for transmitting or receiving DMX.
•DIP switch calculator: Simplifies the configuring of DIP switches used for setting DMX addresses.
•Light Meter: Useful for setting light levels for on-camera use (requires light sensor).
•RF Spectrum Analyzer: For surveying and visualizing Wi-Fi networks in the 2.4GHz spectrum
Hardware
The DMXcat’s hardware interface is a compact battery powered device which fits easily in a pocket or tool pouch or may be worn on a belt. It uses Bluetooth LE technology for communication with the smartphone applications (up to 50’ range). Without the limitations of being physically connected, the user can move about the workspace as needed with their smartphone and run the various apps while still using the phone for on-the-job communication. The device’s five pin XLRF connector/cable assembly allows it to be connected to a point in a DMX data chain to test or control of the various DMX/RDM functions. It is charged using a standard USB to Micro-USB cable and charger. Other features include a built-in LED flashlight, an audible alarm for locating a misplaced unit, XLR5M to XLR5M Turnaround, LED status indicator, and a removable belt clip with a split ring safety point. Optional accessories include XLR5M to RJ45 Adapter, XLR5M to XLR3F Adapter, XLR5M to XLR3M Turnaround, and a Belt Pouch.
Requirements
Android OS version 5.1 or above
Bluetooth 4.0 compatible device
Previous Versions
Here you can find the changelog of DMXcat(R) since it was posted on our website on 2021-12-11 21:22:08.
The latest version is and it was updated on 2026-06-18 00:05:59. See below the changes in each version.
DMXcat(R) version
Updated At: 2025-04-08
Changes: Fixed issues:
Renaming dongle causes the dongle to disappear from connection scans
App would ask for a PIN when none is required
App would allow duplicate channel names in personality editor
Not all files types were sharable in the file share screen
New Features:
Redesigned File Share Screen to list view so file names are more readable
Flicker Finder is now implemented
DMXcat(R) version
Updated At: 2025-02-27
Changes: Fixed Issues:
Art-Net DMX sources only shows the first two slots
Setting DMX preset wouldn't take affect until a DMX change
Too many streaming ACN sources could crash device
Battery percentage wouldn't always refresh
Streaming ACN output at 1000Hz
Multi-fixture control would only control the first fixture in a group
XLR testing 3 pin cables showed pass for cables with 5 pins wired
DMX sources would not go away when removed
DMX timings show incorrect wired refresh rate
Not able to rename device
DMXcat(R) version
Updated At: 2025-01-21
Changes: Fixed Issues:
Connecting to DMXcat-E too early after boot could cause it to crash
Boot load disconnections
View Levels for XLR input
Timings for XLR input
Known Issues:
When removing DMX input from XLR, may take minutes for app to display no signal
DMX timings may appear incorrect for 1/4s
DMXcat(R) version 2.0.0.9.0.26
Updated At: 2024-12-05
Changes: Fixes bugs with incorrect labels for members within Ping Groups
Fixes potential issues when updating the DMXcat-E Secondary Firmware
Adds the device serial number to Problem Reports
DMXcat(R) version 2.0.0.9.0.16
Updated At: 2024-11-27
Changes: Fixed issue where wired DMX/RDM could crash DMXcat-E
DMXcat(R) version 1.5.4.9.0.726
Updated At: 2023-09-12
Changes: Fixed DMXcat slots per packet error when using Max Speed mode.
DMXcat(R) version 1.5.3.9.0.721
Updated At: 2023-08-31
Changes: Updated target SDK to 33.
Fixed bug where user is forced to open the transmitter screen twice.
Fixed bug where double tapping the increment icon would cause value to increment indefinitely.
DMXcat(R) version 1.5.2.9.0.315
Updated At: 2022-09-30
Changes: v1.5.2.9.0.315
Fixed database connection issue
Fixed graphical issue in fixture controller
v1.5.2.9.0.159
Improved compatibility of RDM controller
v1.5.2.9.0.98
Fixed receive DMX function not detecting DMX
Fix DMX button from RDM controller not working properly in rare cases
Small stability fixes
DMXcat(R) version 1.5.2.9.0.98
Updated At: 2022-03-23
Changes: v1.5.2.9.0.98
Fixed receive DMX function not detecting DMX
Fix DMX button from RDM controller not working properly in rare cases
Small stability fixes
v1.5.1.9.0.68
Fixed reading levels if slots were at full when opening the view levels screen
Fixed universe status screen for Multiverse Transmitter
Fixed enumerated manufacturer specific PIDs for sub-devices
Added debug log report
Fix bug with RDM sensor data
DMXcat(R) version 1.5.1.9.0.68
Updated At: 2022-02-08
Changes: v1.5.1.9.0.68
Fixed reading levels if slots were at full when opening the view levels screen
Fixed universe status screen for Multiverse Transmitter
Fixed enumerated manufacturer specific PIDs for sub-devices
Added debug log report
Fix bug with RDM sensor data
v1.5.0.9.0.33
Fixed sensors screen for Multiverse Dimmers
Fixed data storage for Android 9 and earlier
v1.5.0.9.0.30
Improve RDM discovery stability
Disclaimer
Official Google Play Link
We do not host DMXcat(R) on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Google and passed their terms and conditions to be listed there. We recommend caution when installing it.
The Google Play link for DMXcat(R) is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
