DNV 2.7-1 Offshore Module Containers A60 Accomodation Module Containers DNV Approved A60 Zone Offshore Containers for Sale Onshore/Offshore Modular ISO Containers Offshore Module Containers for Sale ISO-Containerized Modules A60 Zone 1 Containers for Sale
Description :
The offshore modules are built according to DNV 2.7-1 and 2.72, Germanische Lloyd or American Bureau of Shipping (ABS). The containers are standard A60 Zone 1 fire rated. Container modules are perfectly modular and have flexible layouts to suit the requirements.
Can also offer on- and offshore solutions for : - Living quarters - Office modules - Control rooms - Technical modules - Wellhead enclosure - Work shop - Tool container For price & terms : Please enquire using the email form below.
--------------------------------------------------------------------------------------------------------------------- Search terms (for official use only) : DNV 2.7-2 Offshore Module Containers for Sale Containerized Modules - A60 Zone 1 A60 Zone 1 Containers for Sale Onshore ISO- Container Modules for Sale Germanische Lloyd Approved A60 Zone Containers for Sale Offshore Container Modules for Sale A60 Accomodation Module Containers --------------------------------------------------------------------------------------------------------------------------
Ingersoll-Rand T4W DH Drilling Rig for Sale Used Drilling Rig for sale 1988 Built Drilling Rig - Ingersoll-Rand T4W DH Model : T4W DH drill rig Manufacturer : Ingersoll-Rand Year : 1988 Condition : As-IS Description : 1988 Ingersoll-Rand T4W DH drill rig S/N : 2837 Cummins 855 Diesel Deck Engine (would have to be removed if air compressor installed) No Air Compressor on Board (Can be installed at an extra cost with 900/350 or 1050/350 or 1250/350) Set up to connect a portable air compressor or mud pump for drilling No Hammer Lubricator or Water Injection Pump (can be installed at an extra cost) 70,000 lbs of Pullback 5,812 Hours 7 Rod Carousel Mounted on a CCC (Crane Carrier Company) Truck Diesel Engine VIN : 1CYDCM284JT0366646 57,064 miles & 4,210 Hours on Truck Note : Can be sold "As Is" or Retrofitted with deck engine, air compressor, etc. installed Location : USA Price & terms : Please enquire using the email form below.
If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you.
We can arrange delivery of equipment and towage of rigs and vessels where needed.
The details mentioned above are believed to be accurate but are not guaranteed. ---------------------------------------------------------------------------------------------------------------- Search words (for official use only) : Ingersoll-Rand T4W DH Drilling Rig for Sale Used Drilling Rig - Ingersoll-Rand T4W DH Drilling Rig - Ingersoll-Rand T4W DH- For Sale in USA 1988 Built Ingersoll-Rand T4W DH Drill Rig Land Drilling Rig - Ingersoll-Rand T4W DH Ingersoll-Rand T4W DH 1988 Built Drill Rig for Sale -------------------------------------------------------------------------------------------------------------------------
NOV TDS4 650Ton Top Drive - New - For sale Top Drives for sale - New - Varco TDS4 NOV - TDS-4 Top Drives – Two available for sale. These Topdrives were Manufactured in 2008 and 2009. There is one 650 Ton and a 750 Ton unit. They have no hours on them, never been used. Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. ---------------------------------------------------------------------------------------------------------------------------------------- Search words - Official use only NOV Top drives for sale TDS4 Top drive for sale TDS-4 650Ton top Driver for sale Top Drives for sale TDS4 650 Ton Top drives for sale TDS4 NOV Top Drives New for Sale New TDS4 Top Drives for sale 650T top Drive for sale -------------------------------------------------------------------------------------------------------------------------------------------
Shipyard reports Shipyard audits Shipbuilding reports
We have the full data of : Latest shipbuilding orders Cancelled orders Latest orderbook New building ships Ships on order and more.
We also generate reports for banks and financial institutions who need to invest in the shipping sector. When investing, the investors need to know the current market, currect supply of tonnage and statistical models. With strong orderbook data and tonnage data, we are able to give the banks and other financial institutions the kind of reports with the special data that you need in terms of age, sector, vessel type and size and many other parameters. We can also offer shipyard audit services and newbuilding inspection services for the maritime as well as the offshore industry. -------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Search words(for official use only) : Shipbuilding reports Shipyard audits Shipbuilding analysis reports Statistical shipping reports & supply/demand models -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Navigation, Communication, Auxiliary :
Bollard Pull Tugboat for Sale 15ton Bollard Pull Tugboat for Sale in India Small Tugboat for Sale - 2000 built 2000 built Tugboat For Sale in India Used Tug Boat for Sale General Type : Steel Motor Tug Boat Classification : Indian Register of Shipping Built in 2000
Dimensions Length overall : 26m Length Registered : 24.34m Breadth Moulded : 7.92 Moulded Draft : 3m Moulded Depth : 3.65m GRT : 184t NRT : 56t Bollard Pull : 15.1 tons (Test conducted on 14 Nov 2011)
Machinery Main Engines : 2 x 720 BHP Caterpiller 3412C DITA @1800rpm Total 1440 bhp Generators : 2 X 24 KW 3 Phase/50 Hz/ Make Yanmar, Model 4TNA98-G1A Propellers : FPP Kort Nozzles Last DD : August – 2010 Last SS : August – 2010 Last all annual surveys completed : 11th Nov 2011
Speed / Capacity Fuel / F.W Speed : 10 knots Fuel Oil Tanks : 150 cbm Fresh Water Tanks : 22.3 cbm
Fuel Consumption Main Engine : 50 Liters /Hours/Engine at 100% MCR A/E : 100 ltrs per day
Anchor Fwd windlass connected to 2 anchors Towing Hook fitted SWL (20 T).
Fire-Fighting, Safety, Rescue Equipment Life Raft : 2 X 15 person International Shore Coupling X 1 LSA- FFA : As per statutory requirement.
Accomodation Individually Air Conditioned : 2 cabins x single berth, 4 cabins x double tier berths, Total 10 persons
Navigation and Communication Magnetic Compass/VHF with DSC/Radar/AIS/Navatex/Gps and others as per class
Price & terms : Please enquire using the email form below.
The details mentioned above are believed to be accurate but are not guaranteed. ------------------------------------------------------------------------------------------------------------------------ Search words (for official use only) - Bollard Pull Tugboat for sale Used Tugboat for Sale in India 15ton Bollard Pull Tugboat for sale in India 2000 built Tug For Sale Used Tugboat for Sale in India - 2000 built Tug for Sale in India Bollard Pull Tugboat - 15 ton - 2000 built Bollard Pull Tugboat for sale in India Small Tugboat for Sale - 15ton Bollard Pull ----------------------------------------------------------------------------------------------------------------
Jack Up Rig For Sale 350/375FT JACKUP GUSTO MSC-C-46-X100D For Sale New 350ft Jackup Rig For sale Only one rig is available Rig 1. Under construction with deliverydate Q2/3 - 2012 Subject to prior sale
The details mentioned above are believed to be accurate but are not guaranteed.
---------------------------------------------------------------------------------------------------------------------------------- Search words(for official use only) - Jackup Rigs For Sale New 350/375foot Jackup Rig For Sale Newbuilding 375Foot Jackup For Sale New GUSTO MSC-C-46-X100D Rig for Sale 350Foot Jackup For Sale Offshore Jackup Drilling Rigs Jackup Drilling Rigs New building 375Foot Jackup For Sale New 350/375foot Jackup For Sale
------------------------------------------------------------------------------------------------------------------------
New UMD 160 Land Drilling Rig - For Sale in Europe New Semi Mobile Drilling Rig For Sale - UMD 160 Main Technical Specifications Engine type : 2 X C 13 ACERT Nominal engine power hp (kW) : 2 X 415 (2 X 309) Transmission : 2 X Allison 4500 OFS Nominal hoisting capacity metric ton (lbs) : 160 (352000) Workover depht (m) drill pipe (2 7/8”) : 6850 Drilling depht (m) (4 1/2“) : 2900 Rope diameter (mm) : 29 Mast height (m) : 36 Drilling floor height (m) : 5-6 Travelling system : 5x4 Working pressure (mpa) : 0, 65-0, 8 Technical Specifications Drawworks Main Drum - Input power (hp) : 900 Barrel size : D24” W42” Brake rim size : D44” W12” Wire line size : 1 1/7” (29 mm) Drum speed : 7F/1R Brake cooling : Water circulation Brake system : Band / disc / auxiliary (Parmac SSR-28 hydro-brake) Chain drives : All chains are fully encloded for oil bath lubrication ensuring longer life and cleaner operation Sand Line Drum - Barrel size : D13” W37“ Brake rim size : D44” W9½” Spooling capacity : 16114’ Sand line wire size : 9/16” (14 mm) - 5/8” (16 mm) Rig Power & Tranamission Diesel engine(s) : 2 x Caterpillar C-13 ACERT, 415Hp, 2.100rpm Transmission(s) : 2 x Allison OFS 4500 series with torque converter Right angle gear box : Min 900 hp gear box in oil bath gear case Compound box : Twin engine drive through transmission includes disconnect clutches at compound shaft for engines. Mast & Crown Block Mast - Mast complete set : Design and conform to API 4F specification Mast height : 36m ( 118ft ) Max. static hook load capacity : 1.765kN ( 352.000lbs ) Racking capacity : 2.500m ( 4 ½” DP, 19.2 m double ) Height of the monkey board : 17.2m ( from floor ) Mast type : Hydraulic telescopic Accessories : Two (2) X hydraulic catheads, Two (2) X tong weight boxes, standpipe, exproof lightning....etc Crown Block - Crown block complete set : Design and conform to API 4F specification Max. hook load : 1.568kN (352.000lbs) Number of sheaves : (3) Main + (1) fast line + (1) deadline + (1) sandline + (2) sheaves for service winch Sheaves OD : Fast Lines Ø36" ( Ø915mm ) Dead Line Ø32" ( Ø813mm ) Sand Line Ø32" ( Ø813mm ) Dia. of sheave’s grove : Fast & Dead Lines Ø1â…› " ( Ø29mm ) Sand & Winch Lines Ø 5/8" ( Ø16mm ) Substructure Substructure complete set : Design and conform to API 4F specification Height of substructure substructure : 5.5m Area of substructure : 40m2 Max. static rotary load : 1.600kN Set back capacity : 800kN BOP lifting tools : 3 tons capacity electric or mechanic winches Accessories : Mouse, rat hole, dog house Rotary Table Diameter of opening : 27½" Center of table to centerline of sprocket teeth : 53¼" Maximum static load, ton : 500 Max speed, rpm : 300 Gear ratio : 3.67 Dimensions (LxWxH), in : 94×66×27 Approximate weight, lbs : 13,500 Traveling Block & Hook Traveling block : 1.600kN max. statik load, 4 sheaves, Ø36’’ sheaves dia. Ø1 1/8” (Ø29mm ) groove dia. Hook : 1.600kN max. statik load, 5tons spring stroke. Elevator link(s) : 1.600kN rated load capacity. Swivel Static hook load, ton : 160 Working pressure, psi : 5,000 Maximum speed, rpm : 300 Coupling thread to stem : 6-5/8" Reg LH Coupling thread to kelly : 6-5/8" Reg LH Stem I.D. : 3" Trailer & Other Systems Trailer : Three axles semi mobile trailer, 12 wheels, fabricated high tensile steel vehicle frame reinforced at points of greatest stress. Highway equipment and cab included. Installed fuel tank. Tool box. Auxilary drill line drum, all axles dressed brake, folding walkwayss on both sides of trailer. Hydraulic jacks : Six hydraulic operated leveling jacks Hydraulic service winch : 5 metric tons drum pull capacity Deadline anchor : Deadline anchor attached directly to trailer frame Hydraulic system : Hydraulic pump, system operate hydraulic cylinders on mast, hydraulic jacks, hydraulic pipe tong, and hyraulic winch. Control valves, hydraulic oil tank, filters, pipes, hydraulic and air valve connections, fittings. Air system : Compressor (engine drive), air tank, relief valves, air dryer, gauges, all clutches Electrical lighting system : All the electrical equipments on the mast, and substructure are ex-proof type Instrumentation : Driller control panel, weight indicator, gauges, air valves, cables, hoses, fittings, transducers, paint Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. ------------------------------------------------------------------------------------------------------------------------------- Search words(for official use only) - New UMD 160 Drilling Rig For Sale in Europe UMD 160 Semi Mobile Drilling Rig For Sale New Semi Mobile Drilling Rigs Land Drilling Rigs For Sale Land Rig Builders in Europe Land Rigs in Turkey Drilling Rig Builders in Turkey Rig Builders in Europe New Land Drilling Rig -------------------------------------------------------------------------------------------------------------------------------
Electric Top Drive for sale 500 Ton Electric Top Drive 800HP / Double Motor Electric Top Drive New Electric Top Drive for Sale - 800hp / Double Motor Features 23,000' / 4.5" drill pipe 18.04 ft. stack-up height 800hp / Double motor 40,500 ft-lbs. drilling torque 60,450 ft-lbs. break-out torque Price & terms : Please enquire using the email form below.
The details mentioned above are believed to be accurate but are not guaranteed. ------------------------------------------------------------------------------------------------------------------------ Search words (for official use only) - Electric Top Drive for sale 500Ton New Electric Drive for Sale - 800hp New 800hp / Double Motor - Electric Drive for Sale 800hp Electric Drive - New New Electric Drive for Sale - 500 ton Electric Top Drive for Sale - 800HP / Double Motor ------------------------------------------------------------------------------------------------------------------------------
20 foot Offshore Reefer Container Offshore Reefer Container for sale
Dimensions :
80K Trailer Mounted Coiled Tubing Unit for Sale CT Rig for Sale Coiled Tubing Unit New Coiled Tubing Unit for Sale Specifications
Section 1 – Unitized Trailer 1.1 Trailer One (1) only custom gooseneck style trailer mounted coiled tubing unit (TM CTU).
Features and Specifications : Height : 13 ft.-6 in. maximum (equipment installed) Length : 53” ft. maximum Width : 8 ft.-6 in. maximum
1.2 Folding Wing Walks Features and Specifications : - Ladders and walkways will be of strong lightweight design for ease of handling and storage. - Folding walkways grip strut type, 2 ft. wide along both sides of trailer with ground access ladders. - Walkways flush with equipment deck when folded down; - Catwalks will not interfere with equipment in stored position. - Ladders, one (1) each side to upper level from lower deck and two (2) from lower deck to ground on each side of trailer.
1.3 Tool Box and Racks Features and Specifications : - One (1) each, above deck toolbox with tools storage are provided. - One (1) set of racks and hold-downs for injector telescoping aluminum support legs. - One (1) set of racks and hold downs for injector 3-ft.steel, maintenance support legs.
1.4 Hoses - Injector supply, injector control and BOP hoses are spooled on hydraulically powered hose reels and are equipped with quick disconnects (QD's) on one end. - Hose support clamps and chains will be utilized on all hose groups of four (4) or more. Hose clamps will be installed to allow enough hose slack for easy connection of hoses. Tagged with stainless steel washers behind QD's.
1.5 Assembly, Painting, Unitization, Testing and Manuals - Complete complex of equipment will be sandblasted, primed and painted. Color to be specified by the customer. - Trailer deck covered with grip strut type decking where equipment is not located. - All equipment skids will be attached with heavy-duty pins / mounts for fast easy removal and installation. Pins to have a generous tapered point to help with installation. - Guards installed to protect fittings and hoses that would otherwise be exposed for potential damage. - All hydraulic valve functions and directions clearly defined and labeled. All hose connections and mating bulkhead connections labeled with identification numbers. - All pins have retaining chains. Chain length will be generously long to allow easy pin installation. Chain will be fixed to the pin in a manner that will not interfere with tapping pins in place with a hammer. - Lifting and attachment pad eye sizes and thickness match relevant standards and accommodate standard size shackles. - Supply and installation of all required fittings, hoses, connections and miscellaneous items necessary to complete the unitization of trailer and equipment. Including all labor and hardware required to assemble and install all coiled tubing components on the trailer. - All components and equipment will be assembled, fitted and function tested before shipment. The seller will supply all fuels, lubricants and other necessary fluids to conduct these tests. - All controls will be clearly labeled. - Three (3) each, operating manuals will be supplied.
Section 2 - Control Cabin and Operator’s Console
2.1 Control Cabin The control cabin is constructed of an aluminum box tubing frame with sheet aluminum outer skin. The cabin provides all hydraulic, pneumatic and mechanical controls for coiled tubing operations and hydraulically telescopes to allow the operator clear visual access to the reel and injector head. Telescoping control has local access on the trailer deck beside the cabin.
Features and Specifications: - Cabin is insulated and the interior walls are covered with white, washable panels. - Two (2) side access doors incorporate: Window, rain gutter, and stainless steel hardware (each side of cabin). Sliding type read and side windows with rain gutters and lockable doors have key locks. - One (1) interior 12 VDC, fluorescent light is provided. Light will be located to minimize front window glare and maximize interior visibility. Interior wiring is sub-surface mounted. 110 vac outlets and lighting is also provided for use with provided generator system. - One (1) "Captain's," swivel style chair for operator. - A bench seat is fitted against the rear of the cabin with storage space below. - Two AC units to provide a Minimum cooling capacity up to 4.5 Kw - Air horn provided as a ground personnel alert device; button mounted on the control panel. - Two (2) 12 VDC, spot and floodlights are mounted externally on front of cabin and are adjustable from cabin interior.
Cabin Dimensions Height : 6 ft.-4 in. floor to ceiling Length : 7 ft.-0 in. front to back wall Width : 7 ft.-6 in. between inside walls Weight : 7,000 lb. including control panel and hydraulic controls.
2.2 Operator Control Console Features and Specifications : - One (1) 4-bank valve for BOP directional control, with isolation valve and a flip up lock out safety latch. Directional control valve has internal load checks to prevent pressure drop when individual banks are operated. - BOP pressure gauge. 0-5000 psi with a 2 1/2" face. - Emergency air over oil pump and with manual hand pump feature to operate BOP, stripper and injector traction circuits in the event normal supply pressure is lost. - Stripper circuit, includes: pressure regulator, directional control valve and gauge 0-3,000 psi, 2 1/2" face, for stripper / packer operation. - 8" face hydraulic weight indicator gauge for injector pull and push force, scale is in 250 lbs. increments. - Supply valves, bleed valves and gauges for injection traction circuits. Common inlet supply controlled by a pressure reducing valve. Gauges are 0-2,000 psi. - Joystick controller for precise injector speed and direction control. - Injector brake is automatic. - Relief valve for injector force (pull / push) control. - Pressure gauge for injector drive. 4" face, 0-3000 psi. - On / off air valves, for injector chain and tubing reel lubrication. - Hydraulic valve, 3-bank directional control is used for control of tubing reel pay-off/take-up, levelwind arm raise / lower and levelwind override. This bank valve is of mid-inlet design to allow two separate inlet supplies and one common return. The override control handle is taller and located for ease of operation. The reel take-up / pay-off handle has a normal position safety lock to prevent accidental shifting during operation.
- Reel brake off / on functioning is automatic. - Relief valve for reel tension (pay-off / take-up pressure) control. - Reel Pressure gauge. 4 1/2" face, 0-3,000 psi. - Two (2) 6" face, 0-5,000 psi, pressure gauges for wellhead pressure and circulating pressure. 4:1, gauge de-boosters are utilized to prevent pumped or well fluids from entering control cabin. Gauges are located in close proximity to the weight indicator on the control panel for ease of operator viewing. - Controls for engine speed, normal and emergency shut down. - Outside injector drive chain tension pressure control valve and pressure / bleed valves with pressure gauge, 2 1/2" face, 0-600 psi. - Engine start button. - Engine gauges include RPM, oil pressure, water temperature, and voltage/amperage. - Two (2), 12 v fans will be mounted at each side of front window. - Console panel is aluminum with engraved labeling for all controls, gauges and valves. Panel is angled for ease of viewing and access to controls. - BOP accumulators consists of one (1) each, 10 gal. bladder type accumulators. Reserve control system accumulator, (1) each 5 gal. bladder type. Both accumulators provide stored volume and pressure for BOP and system control in the event of engine shutdown. These accumulators are mounted directly in front of the control cabin.
Section 3 - Wet Kit Trailer mounted (HPS)
3.1 Hydraulic and Pneumatic Systems Features and Specifications : - HPS (hydraulic power system) is powered by a trailer mounted Engine via a pump drive. The pump drive supplies horsepower to drive the hydraulic pumps. The hydraulic pumps are mounted directly to the pump drive. The pumps are engaged and disengaged by an electric selector switch in the tractor cab. - All the hydraulic system accessories such as: Hydraulic tank, heat exchanger, gauge panel, mounts, supports, etc. are also trailer mounted. This integrated package comprises what is known in the industry as a “wet kit”. This wet kit supplies all the hydraulics required for coiled tubing operations. - A Closed Loop Hydraulic System (Pressure compensated, piston pump) is utilized to power the injector. All necessary controls, filters and valves are supplied for safe operations for maximum injector pull and running speed. - Two (2) additional pump compensated pump are used for tubing reel drive, BOP and Priority (control) and other auxiliary systems. These circuits are designed for optimal performance and minimal heat generation.
Capacities Desiel Engine (Cat C15) or Client perference : 540 HP @ 1800 to 2200 rpm Hydraulic oil reservoir : 140 US gallons. Bladder type BOP accumulators, (total) : 10 gallons. Control console hand pump reservoir : 5 gallons. Control circuit accumulator : 5 gallons. Hight pressure Hydraulic Filter Set : 1 set.
Hose Lengths Injector power : 75 ft. - Mounted on a powered hose reel Injector control : 75 ft. - Stored on trailer deck BOP : 75 ft. - Stored on trailer deck
Section 4 - Tubing Injector
4.1 Injector Head One only supplied, OS 80K (TBG INJ) Features and Specifications : - Hydraulic motor drive, wet-disc style, spring applied / pressure release brakes. - Supplied with 1 1/2" chains for coiled tubing operations. - Drive shaft, sprockets and synchronizing gears, are used to provide superior drive component strength and durability. - Each shaft drive is bearing supported. - Skate design for maximum longevity. - Remote (control console) hydraulic chain traction controls. Each has individual controls to insure redundant system safety. Each cylinder set is equipped with bladder style accumulators to reduce shock loads from tubing abnormalities. - Injector mounted load cell with drive frame support for load cell bladder protection during transporting. - 96" radius tubing guide arch (gooseneck) with steel rollers. Adjustable arch positioning over drive chain center. Pick-up chain provided for easy removal and installation of gooseneck. - Impact resistant steel protective frames. - Four (4) points lift eyes complete with single 4-part lift sling. - High-pressure inline filters assemblies located between injector motors and counter balance valves. - High pressure welded steel plumbing on motor circuits for safety. - Easy access grease fittings to insure proper lubrication. - Piloted lower bearings to insure precision alignment and insure transmission of loads through the side plates to increase component life. - Four (4) Aluminum telescopic support / stabilizer legs with adjustable leveling screw. - Four (4) 3 ft. long steel work legs. - Coupling panel with numbered quick couplings for fast set-up. Numbers match numbered stainless steel washers on hoses retained by hose quick disconnect. - Protective grids on all interior access ways for added protection to operators. - Ladder integrated into frame to access top of injector. - Lifting points located on all four top corners. Complete with four (4) 1/2" wire ropes slings, bails and shackles. - All hydraulic connections will be centrally located on a bulkhead(s). Connections will be clearly labeled, integral check valve type quick connects. Mechanical supports (chain hooks) will be provided to prevent excess strain on hose bundle and quick disconnects. Hose bundles will be equipped with bundle clamps and support chain. - Capable of accepting optional chains sizes 1 1/4" to 2 7/8” - Lower base mounting for standard stripper / packer.
Pull capacity : 80,000 lbs. Maximum 30,000 lbs snubbing. Maximum running speed : 200 ft./min. Load cell & weight indicator system : 80,000 lb. Chain lubrication system, reservoir capacity : 5 gallons. Mounted on carrier.
Section 5 - Tubing Reel
5.1 Reel One (1) only, CTU operational reel with heavy duty skid base design. Reel drum is recessed below the trailer main frame rails to reduce overall unit height. A formed steel pan below the reel serves as a tubing protection and drip pan. Dip pan area has two (2), 2" npt drain ports with plugs.
Both drum flanges are covered with expanded metal for spoke protected and easy viewing of tubing.
Reel drive is via a hydraulic motor and planetary gearbox with integral brake. Crossover relief valve protection is provided for motor. Hydraulic brake system is designed to prevent accidental over pull across tubing guide arch if injector is engaged without the reel brake being released.
Ballscrew levelwind with automatic mechanical drive of tubing support trolley and counter assembly. A hydraulic motor override system allows operator to override mechanical system and position tubing as required. Levelwind arms are hydraulically raised from horizontal position to working height angle from control cabin. A pilot operated check valve provides positive position lock of hydraulic cylinders.
Features and Specifications : - Heavy duty, dual cross member design, trolley tracking guide and counter assembly. - External manifold, 10,000 psi with inlet connections and shut-off valve between swivel and inlet. - Internal plumbing manifold, 10,000 psi with shut-off valve between axles and drum core. Incorporates a "tee" for plug and ball launching. - Spreader bar assembly with slings and shackles for lifting reel without damaging drum flanges is provided. - All hydraulic and pneumatic connections made at quick disconnect coupling panel located at side of reel skid. All connections are numbered. - Mechanical counter and tubing support (trolley). Heavy duty, 4-roller support / guide, free floating counter design. Locking pins are incorporated for strength and positive locking. The counter wheel is case hardened, precision ground for accuracy and long life. - Counter is calibrated in meters. Counter comes complete with a five (5) digit 3/4" high numbers, Veeter Root mechanical counter. Depth display is easily viewed from control cabin. - Reel drum tie down points are provided on one drum flange to secure drum during transport. Minimum working depth capacity : 20,000 ft. (with 1 1/2" tubing). External manifold (field iron inlet piping) : 10,000 psi WP. Internal manifold (tubing connection piping) : 10,000 psi WP. Height : 13 ft.-6 in. (sitting on trailer)
Section 6 – Coiled Tubing
6.1 Tubing One (1) only reel, coiled tubing string. Standard is 1 1/2” OD coil tubing; wall thickness and exact length will be predetermined with customer.
Section 7 - Well Control Equipment
7.1 Quad BOP's One (1) set of 4 1/16” X 10K QUAD BOP’S; rams hydraulically function from top to bottom. BOP’s come complete with integral, ram section equalizing valves. All ram sets have mechanical, manual locking devices and external ram position indicators.
Features and Specifications : - Blind - Shear / cutter - Slips - Pipe - Top and bottom connection CB 34 union x-over to BX 153 flanged connection. CB 34 box up x CB 34 nut & pin down. - Flanged crossover for side outlet. Flange is 2.06" BX 152 ring, 10,000 psi WP x 2" Fig. 1502 hammer union, thread half outlet. - Fitted for 1 1/4" coiled tubing service. - Rated for H2S Service - 17-4PH ram shafts and internal coating to prevent corrosion. - Actuator closing volume 216 Cu.In.
7.2 Stripper / Packer Assembly (Stuffing Box) One (1) only, Packer Assembly, 4 1/6" x 10K side door stripper
Features and Specifications : - Flange mounted to bottom of injector frame. - Hydraulic pack and retract functioning. - All internal components "split" to facilitate insert changes while pipe is in the stripper body. - 10,000 psi WP - H2S service.
Section 8 – Spare Parts
Recommend spare parts required for Coiled Tubing Unit operations.
8.1 Control Cabin and Control Console
Hydraulic Gauges Description / Range / Quantity Panel Mount, 2 ½” face / 0 -160 psi / 2 Panel Mount, 2 ½” face / 0 -600 psi / 2 Panel Mount, 2 ½” face / 0 -1000 psi / 2 Panel Mount, 2 ½” face / 0 -3000 psi / 2 Panel Mount, 2 ½” face / 0 -5000 psi / 2 Panel Mount, 4” face / 0 -600 psi / 2 Panel Mount, 4” face / 0 -3000 psi / 2 Panel Mount, 4” face / 0 -5000 psi / 2 Stem Mount, 2 ½” face / 0 -160 psi / 2 Stem Mount, 2 ½” face / 0 -600 psi / 2 Stem Mount, 2 ½” face / 0 -1000 psi / 2 Stem Mount, 2 ½” face / 0 -3000 psi / 2 Stem Mount, 2 ½” face / 0 -5000 psi / 2 Weight Indicator / - / 1 Additional Description : Quantity Traction pressure, pressure reducing valve : 2 Traction pressure on / off valve : 2 Chain Tension pressure reducing valve : 2 Joy Stick injector directional valve : 1 Stripper pack / retract valve : 1 Air regulator valve for emergency pressure air over oil pump : 1 Windshield wiper control valve : 1 Panel mount, pilot relief valves (R1E02, Denison) : 2 BOP on / off isolation valve : 1 BOP on / off valve for emergency supply : 1 Emergency / normal engine kill valve : 1 Cylinder repair kits for control cabin lifting cylinders : 2 Injector two speed / brake pressure reducing valve : 1 8.2 Hydraulic Power Unit (Power Pack) Description : Quantity Injector Drive Pump : 1 Reel Drive Pump : 1 BOP Supply Pump : 1 System safety relief valve : 1 Injector system high pressure filter elements : 8 Injector drive charge pump filter elements : 4 Low pressure return filter elements : 6 All pump suction strainers : 1(set) BOP accumulator bladder replacement kit : 1 Priority accumulator bladder replacement kit : 1 Pump isolation butterfly valve replacement seals : 2 O-ring kit, 3/32" width : 2 O-ring kit, 1/16" width : 2 Hose reel hydraulic drive motor and sprocket : 1 (each) (M/F) standard hydraulic quick disconnects, sizes 1/4" thru 1" : 2 (sets) Injector male and female quick disconnects : 1(set) 8.3 Tubing Injector Description : Quantity Injector Drive Chains : 1 (set) Seal and repair kits for injector chain traction cylinders : 4 (kits) Seal and repair kits for injector chain tension cylinders : 2 (kits) Gooseneck polyurethane rollers and bearing assemblies : 1 (set) Traction accumulators : 2 Drive system counterbalance valve cartridge : 1 Brake release shuttle valve : 1 Chain traction bearings : 1 (set) Drive motor : 1 Drive chain tension sliding take-up bearings : 2 Drive chain bottom idler bearings : 2 8.4 Tubing Reel Description : Quantity Reel drive hydraulic motor : 1 (each) Levelwind override hydraulic motor : 1 (each) Levelwind follower (pawl) inserts : 2 (each) Counter wheel : 1 (each) Chains and master links for counter : 1 (set) All bearings used in counter assembly : 1 (set) Veeder Root counter and drive coupling : 1 (each) Circulating swivel seal and repair kits : 2 (kits) Nose seals for circulating swivel : 4 (each) Levelwind arm cylinder seal and repair kits : 2 (each) Repair and seal kits for Reel plug valves : 2 (kits) Lenz coiled tubing connectors, 1 1/2" npt x 1 3/4" tubing : 10 (each) 8.5 Well Control Equipment Description : Quantity Reel drive hydraulic motor : 1 (each) Levelwind override hydraulic motor : 1 (each) Levelwind follower (pawl) inserts : 2 (each) Counter wheel : 1 (each) Chains and master links for counter : 1 (set) All bearings used in counter assembly : 1 (set) Veeder Root counter and drive coupling : 1 (each) Circulating swivel seal and repair kits : 2 (kits) Nose seals for circulating swivel : 4 (each) Levelwind arm cylinder seal and repair kits : 2 (each) Repair and seal kits for Reel plug valves : 2 (kits) Lenz coiled tubing connectors, 1 1/2" npt x 1 3/4" tubing : 10 (each) 8.5.2 Stripper Packer / Stuffing Box Assembly Description : Quantity Standard service stripper rubbers for tubing : 25 (each) Standard service energizers for above stripper rubbers : 5 (each) Repair kits to include all consumable and hydraulic seals : 4 (each) 8.6 Spooling Reel (if this option is purchased) Description : Quantity Reel shaft support bearing : 4 (each) Drive shaft support bearing : 1 (each) Reel drive hydraulic motor : 1 (each) Hydraulic extension cylinder repair kit : 1 (kit)
The details mentioned above are believed to be accurate but are not guaranteed. ------------------------------------------------------------------------------------------------------------------------------- Search words (for official use only) - Trailer Mounted Coiled Tubing Unit for Sale CT Rig for Sale Rig for sale - New Coiled Tubing Unit New Coiled Tubing unit for sale - 80K Trailer Mounted Coiled Tubing Unit - New 80K New Coiled Tubing Unit for sale ------------------------------------------------------------------------------------------------------------------------------
Description
ASD Tug For Sale 4400BHP MULTI-PURPOSE ASD TUG
Main Particulars : Length O.A. : 30m Length B.P. : 25.2m Beam MLD. : 10.8m Depth MLD. : 5.4m Crew : 12 Design Draft : 3.6m Max Draft : 4.7m GRT : 469 NRT : 140
Classification Notation : BVâ… Hull Mach, Salvage Tug / Utility Boat / Fire Fighting Ship 1 unrestricted navigation
Year Built : 2010
Main Capacity : FO : ~267m3 FW : ~80m3 Fi-Fi Foam : 18.16m3 Spilled Oil Dispersant : 4.5m3 Lube Oil : 1.0m3
Anchoring and Towing Equipment : -Single Reel Hydraulic Towing Winch Set : Maker : Plimsoll - Singapore Capacity(Steel Wire) : φ46mm×770M Brake Holding : 150 MT Rated pull : 20MT@0~10M/min and 5MT@0~30M/min Hydraulic emergency release
-Hydraulic Anchor/Escort (Towing) Winch Set : Maker : Plimsoll - Singapore Anchor weight : 2 × 570 kg Diameter of anchor chain : Φ20.5 mm Rated hauling speed : 1.83MT@0~15M/min Capacity(P.P. Wire) : φ100mm×110M Brake Holding : 120 MT Rated pull : 18MT @ 0~10 M/min
- Electro-hydraulic collapsible mast : 1set
Main Machinery & Propulsion Unit : Main Engine Sets : CUMMINS – USA-UK - Power 2,200 BHP @1,800rpm/min - Model CUMMINS QSK60-M - Quantity Two Sets
Marine Gen. Sets CATERPILLAR – USA - Model CATERPILLAR 3406MGS - Power 245eKW /400V/50HZ/ 3Φ - Quantity Two Sets
Harbour Genset 1×DuFong-CUMMINS CCFJ-60J– US-China - Power 60KW /400V/50HZ/ 3Φ
Marine Crane SQ8ZB3 - Max. Lifting SWL0.98MT@12M/ 8MT@2M - Quantity One Set
ASD Propellers - Model AQUAMASTER US205MK2 FP - Maker ROLLS ROYCE – Finland - Quantity : One set
Bow Thruster 1×STT110L-FP Power 90KW
Oily Water Separator 0.25M3 x One Set
Sewage Treatment 20-22 persons Plant One Set External FIFI System (SOLAS – FIFI 1 Class) - Firefighting Monitor 2×1200/300M3/hr(water/foam), range120/70M(water/foam) height water throwing 50M(water) - Firefighting Pump 1×2400M3@1.17MPa - Maker FFS – Norwegian F.O. Separator 1 x 1500L/h
Lifesavng and FiFi Equipment : - In compliance with the SOLAS requirements, Hong Kong merchant shipping ordinance and class notation requirements as regards Lifesaving & FiFi equipment. - CO2 System as per BV Rules - 8 x Life buoy; 16 x Life jacket; 2 x 15persons Liferaft; Portable Fire Extinguisher : 11 x 9kg foam; 6 x 5 kg CO2; 9 x 6kg Dry Powder; 1x 45 L Foam Fire Extinguisher (cart-pushing); 4 sets fireman outfit with breathing apparatus; 2 sets breathing apparatus of artificer diver; 2 sets gas mask with filter; 4 sets flood protection unit of1M x 2M; 12 x parachute distress rocket; 2 x Orange Smoke signal; 6 x Floating Light - Salvage and support Pump ability : 100M3/h & 90M3/h - Electric Fifi General Pump ability : 25M3/hr - Spare Electric Fifi Pump ability : 25M3/hr - Spilled Oil Dispersant System
Main Radio & Navigation Equipment : Radar 1×FR-1510MK3 Echo Sounder 1×Furuno FE-700 Speed Log 1×Furuno DS-80 Anemometer 1×Furuno FI-50 GPS 1×Furuno GP-150 Electrical Horn 1×Yahagi E3M-24 Autopilot 1×Alphaseapilot MFC Vertical Standard Magnetic Compass 1×CPL-165 Steering Magnetic Compass 1×CPT-130 Sound Power Tele. 1×12KSL Public address system 1×KSGB-JQ AIS 1×Furuno FA-150
A3 sea GMDSS MF/HF SSB 1×Furuno FS-2570 Inmarsat-C(SSAS) 1×FELCOM-15(IC-307) Inmarsat-C 1×FELCOM-15 VHF telephone 2×Furuno FM-8800S NAVTEX 1×Furuno NX-700B SART 1×Pathfinder 3 SART EPIRB 1×ACR RLB-32 Portable VHF 2×ACR SR-102
Air Conditioning System : -Equipped centralized air- conditioning for Wheelhouse, Mess Room, Captain’s and Chief Eng. Room and other crew room. -Equipped split-type air handling unit for engine room centralized control room and split-type air- conditioner for wheelhouse.
Accommondation & main living facility 2×Senior Officer Cabin for single 1×Senior Officer Cabin for two men 2×Crew Cabin for four men 1×Assemble-type Provisions Freezer 2×Twin Head-type Induction Hob 1×Berlin centralized electric water heater 1×Cleemann Captain Chair – Germany - Model : Nautic D GZ - Material : Synthesized leather - Width : 610mm - Height : Min558mm / Max718mm - Length of rail : 2200mm Price & terms : Please enquire using the email form below.
-------------------------------------------------------------------------------------------------------------------- Search words(for official use only) - ASD Tug For Sale 4000bhp ASD Tug For Sale 4400hp ASD Tug For sale ASD Tug For Sale in Singapore, Malaysia, Indonesia ASD Tug For Sale in Middle East, India --------------------------------------------------------------------------------------------------------------------
Double Expanding Gate Valve for Sale Vastas Valve for Sale - 24" 24” Vastas Valve for sale - class 600# Class 600# Vastas Valve Specifications Manufacturer : VASTAS Valve Manufacturing Class : 600#
Type : Double Expanding Gate Valve, Double block and bleed Fire safe design TCC metal to metal seats with emergency lubricant seal.
Design standard : API 6D Bonnet : ASTM A216 Gr. WCB Body : ASTM A216 Gr. WCB Double Expanding Gate Face : Tungsten Carbide HVOF Double Expanding Gate Assembly : AISI 410
Stroke : 722mm Working Pressure : -29 to 38 Celsius, 102 bar, Max 425 Celsius, 56 bar Test Pressure : Shell 153 bar, Closure 112 bar, Air 6 bar
Part Number : 110 Date : 06-2010 Price & terms : Please enquire using the email form below.
---------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : Double Expanding Gate Valve for Sale Fire Safe Design Vastas Valve for sale - 24" Class 600# Vastas Valve 24” Vastas Valve for sale Double Block and Bleed Vastas Valve 24" Vastas Valve for Sale - class 600# -----------------------------------------------------------------------------------------------------------------------------
Quick & Ready homes for Bakken Fields Portable Homes for Bakken Shale Plate USA for sale Thermal Zone III and Wind Zone III Portable Homes Mobile Offices for Sale in America Portable Homes for Sale in America Mobile Homes In USA for sale Temporary homes for America Portable Offices for Sale in America Cheap Homes For USA for sale
50 Proposed Portable Homes for Sale Please contact us if you need any other kind of housing as we provide many types, designs and for various budgets. Description : The units are thermal zone III and wind zone III meaning that they are intended for cold climate and high sustained wind activity in excess of 110 mph. The units include all appliances, furniture and HVAC (heat with air conditioning).
These units do not require escorts as they are 12’ wide. The units utilize 10” frame rails as part of the ruggedized construction. They also have fire extinguishers, smoke detectors and carbon monoxide detectors. These units also include NOAA weather radios that will alarm prior to the arrival of dangerous wind storms.
Currently there are 47 of these units available for immediate delivery with an additional 25 units being completed on the factory line.
Specifications
Floor System 2” x 6” Floor joist #2 SPF or better 16” O.C. 23/32 Tongue & Groove OSB Floor Decking Metal heat ducts wrapped with R-4 insulation Standard Undercarriage SW1240 - 10" I-Beam - 40' w/ 4' Hitch (4 on 40') to insure protection on delivery / transportation, set up and site conditions and longevity due to any inconsistancies resulting from those very key issues. All axles and tires are new. 2 Brake - 2 Idler Axles
Carpet / Roll Goods Linoleum Throughout
Wall Construction 2” x 6” #2 SPF exterior wall studs – 16” OC 2” x 6” top plate over windows and door headers 90" sidewall flat ceiling
Electrical 200 AMP electrical service Bard Wall Unit 10KW Heat Strip 34,000 BTU to supply ceiling heat duct 1-Ext. GFI weatherproof recept Lighted bath exhaust fan Wire and vent for dryer Smoke detectors with strobe Electrical Wiring per 2005 NEC
Plumbing 30 gallon double-element electric water heater Main supply water shutoff Brass plumbing tees and elbows TuffPEXÔ polyethylene non-toxic tubing vs rigid waterline Pressure rated pex to 200 deg. F @ 80 psi 1-pc. 60” tub/shower fiberglass Plumbing for washer – Wire for dryer Water Shut off’s throughout
Insulation R-22 batt ceiling insulation - wool R-19 batt sidewall insulation R-19 batt floor insulation
Roof Construction 30 lb. Roof load trusses Nominal 3/12 Roof pitch - 16" O.C. Trusses 7/16” OSB roof decking Owens Corning Supreme Shingles - Shasta White Ice and water shield at eaves Windows Kinro Wind Zone III Windows Low-E insulated glass Removable screens-all windows
Interior 2.7 Mil Azdale wall panel Residential finished ceiling Sea-Spray with vapor barrier Childproof shades on windows Prehung white interior doors Mortise hinged int. doors Wood trim, doors and windows 3 hinges per door China commodes in all baths Plastic sink - baths Ceiling mount heat registers
Furniture Dinette table w/ 4 chairs Living Room sofa with pull out bed Bedrooms std mattress w/box spring, frame and five drawer dresser Weather radio
Kitchen / Baths Banak cabinets Flat Panel Doors Shelves overhead cabinets Cabinet door hinges 33” x 22” x 6” deep bowl(s) stainless steel sink – Kitchen White power vent and lighted range hood GE 18CF FF Refrigerator GE 30" Electric Range
Exterior Doors 36” x 76” Vinyl clad steel insulated 6-panel frt dr outswing 36” x 76” Vinyl clad steel insulated 6-panel rear dr outswing Deadbolt lock-front and rear
Exterior Crane 4ӊ Dutch Profile- vinyl siding with matching crown molding 40 mil thick virgin vinyl material - no regrind Price & terms : Please enquire using the email form below.
The details mentioned above are believed to be accurate but are not guaranteed. ----------------------------------------------------------------------------------------------------------------------------------- Search words(for official use only) : Quick & Ready homes for Bakken Fields Mobile Homes in USA for sale Quick Build Homes For America Portable Homes for Sale in America Wind Zone III Easy Build Homes in USA for Sale America - Portable Homes for sale North Dakota Mobile Homes in America Thermal Zone III Portable Homes in USA for Sale Bakken Shale Homes for sale in America Mini Homes For Bakken Shale for sale in USA Container Homes For USA Container Homes For America for sale Easy Build Homes For USA for sale Easy Build Homes For America Mini Homes For America for sale Mobile Offices for Sale in USA ------------------------------------------------------------------------------------------------------------------------------------
General Characteristics
Inner diameter (in mm)
Pressure Rating
PN6
PN8
PN10
PN12.5
PN16
OD(mm)
Inches
SDR26
SDR21
SDR17
SDR13.6
SDR11
200
8”
184
180
175
171
162
225
207
202
197
192
182
250
10”
230
219
213
280
257
252
245
239
226
315
12”
289
283
276
269
255
355
14”
326
319
310
303
287
400
16”
368
360
350
341
324
450
18”
414
405
394
384
364
500
20”
460
437
426
404
560
22”
515
504
490
478
453
630
24”
579
567
551
537
510
710
26”
655
642
629
606
581
800
28”
738
724
709
682
Single Drum Winch SMATCO Model 84-DPS-100 for Hire SMATCO Model 84-DPS-100 Single Drum Winch for Charter Single Drum Winch - 367,928 lbs. at Bare Drum Single Drum Winch for Lease SMATCO Model 84-DPS-100 - Deep Water Winch for Charter Marine Winch for Charter Offshore Winch for Lease Specifications Line Pull : 367,928 lbs. at Bare Drum Cable Capacity : 1 1/2" cable 12,000’ Engine Package Skid Assembly : 9,000 lbs Winch Drum Assembly in Transport Frame : 45,000 lbs Winch Frame Assembly : 37,000 lbs Optional Levelwind Assembly : 14,000 lbs Total Estimated Weight without Wire Rope : 91,000 lbs Min. Air Pressure : 100 psi Water : 50 GPM for heat exchanger (Sea Water) Electrical Voltage (AC) : 110 V Used for Sub Sea Installations of : J Tube pulls Jacket pulls Jumper installations Mooring line installations Pipe line pulls Steel lead Installations Trees Tubing head spools
------------------------------------------------------------------------------------------------------------------ Search words (for official use only) - Single Drum Winch SMATCO Model 84-DPS-100 for Hire Marine Deck Winch for Charter Single Drum Winch for Hire - 367,928 lbs. at Bare Drum Deep Water Winches for Charter SMATCO Model 84-DPS-100 Single Drum Winch for Lease Rig Winch for Rent SMATCO Model 84-DPS-100 Single Drum Winch ----------------------------------------------------------------------------------------------------------------------------
Mini Bulker for sale 4500T Mini Bulker for sale Used Mini Bulker for sale 1984 built Mini Bulker - For Sale Cheap Small Bulk Carrier For Sale
General Information Type of vessel : Bulk Carrier Built : 1984 Classification : VIRES
Main Particulars LOA : 94.86 m LBP : 88.00 m Breadth mounded : 15.80 m Draft (in Summer) : 5.50 m Light draft : Fore : 1.67 m Aft : 2.07 m
GRT : 2,826 NRT : 1,283 DWT : 4,485 M/E : 6EL40
BHP : 3,300 CV RPM: 130 Cargo Gear : - Derricks : 3 Units x 15 Mts Service Speed : Full Loaded : 12.3 knots In Ballast : 15.1 knots
Hold’s Dimensions Hold No.1 : 25.2m x 15.6m x 5.6m Hold No.2 : 37.8m x 15.6m x 5.6m
Cargo Hatches Hold No.1 : 14.7m x 8.2m Hold No.2 : 27.3m x 8.2m
The service capacities of bunker and fresh water : FW / DO / FO : 390.7 / 37.4 / 331.6 mts
Daily Consumption Main Engine : 8.0 mts FO/day
Generators Power : 300 CV - 1.200 RPM x 2 units Cargo Working : 1.2 Ts DO/day At Sea : 0.6 Ts DO/day Idle : 0.7 Ts DO/day
Ventilation System : Natural Cargo batten fitted : NIL Type of Hatches’ cover : Pontoon
The details mentioned above are believed to be accurate but are not guaranteed. -------------------------------------------------------------------------------------------------------------------------- Search words(for official use only) - Mini Bulker for Sale 4500T Mini Bulker for sale Cheap Small Bulk Carrier For Sale 95M Mini Bulker for sale 1984 built Mini Bulker - For Sale Cheap Mini Bulker for sale Bulk Carrier For Sale - 95M 5000Ton dwt Bulk Carrier for sale Cheap Used Small Bulk Carrier For Sale 4000Ton Dwt Bulk Carrier For Sale -----------------------------------------------------------------------------------------------------------
Ingersoll-Rand DM25 Used Drilling Rig For Sale Used Drilling Rig 1985 Built - for sale Model : DM25 Manufacturer : Ingersoll-Rand Year : 1985 Condition : Used Description : 1985 Ingersoll-Rand DM25 track drill rig Multi-Pass IR 750 cfm / 350 psi air compressor Cummins Diesel engine Repacked cylinders on mast Repacked three (3) leveling jacks Repacked 3 pumps, five (5) rod carousel Dimensions : 36' L x 11' 10" W x 14' 6" H Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you.
The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------------- Search words(for official use only) : Ingersoll-Rand DM25 Drilling Rig for Sale Used Drilling Rig Ingersoll-Rand DM25 For Sale 1985 Built Drilling Rig for Sale in USA Used Drilling Rig 1985 built Ingersoll-Rand DM25 Land Drilling Rig For Sale 1985 built Used Ingersoll-Rand DM25 drilling rig for Sale -------------------------------------------------------------------------------------------------------------------
Mobile Crusher - Komatsu BR580JG-1 Komatsu BR580JG-1 Mobile Crusher for Sale Used Mobile Crusher for Mining
The newly designed Komatsu BR580JG-1 mobile crusher looks simple but is very powerful. The upgraded Komatsu designed crusher offers maximum production capacity. High-performance jaw The KCJ4430 large-capacity jaw crusher provides maximum crushing capacity in this class along with easy maintenance. In addition, Komatsu’s locking cylinder mechanism allows you to change the discharge clearance with a simple one-touch adjustment and also facilitates the removal of clogged foreign material from the discharge side. Price & terms : Please enquire using the email form below.
--------------------------------------------------------------------------------------------------------------------- Search words - Mobile Crusher for Mines Komatsu BR580JG-1 Mobile Crusher for Sale Used Mobile Crusher for Sale Komatsu BR580JG-1 Mobile Crusher for Mining -----------------------------------------------------------------------------------------------------------------------
Bunker Tanker Ship Design for Sale Small Tanker Ship Design for Sale Mini Tanker Ship Design for Sale 750dwt Bunker Tanker Ship Design for Sale Description Double hull and double bottom bunker tanker is designed for carrying oil products flash point above 60C.
Class Notation BV I Hull, machinery, oil tanker flash point above 60C, AUT-UMS, ESP, Coastal Area Navigation.
Main Particulars Lenth overall : 45.30m LBP : 42.80m Breadth : 9.60m Depth : 3.75m Draft (scantling) : 3.35m Gross tonnage : 499 GRT Cargo capacity : 735cbm
Main Propulsion Main engine : 2 x 350KW Propeller : 1500mm DIA 320rpm
Speed and Consumption Speed : 10 knots Fuel Consumptio : 3.0t/day
Cargo Installation Cargo tanks : 8 pcs
Cargo pumps : 2 x 180cbm/h 8 bar screw 1 x 90cbm/h 6 bar cent
Segregations : 3
Aux Machines Diesel generators : 2 x 125kw 1500 rpm Harbour generator : 25 kw Boiler : Abt. 260kw Ballast pump : 2 x 25cbm/h 3 bar
Fire Fighting and Safety Fire pump : 2 x 25cbm/h 8 bar Life raft : 2 x 6 persons Rescue boat : 6 persons
Accommodation Cabins : Captain cabin 1 x crew cabin for 4 persons 1 x crew cabin for 2 persons Price & terms : Please enquire using the email form below.
The details mentioned above are believed to be accurate but are not guaranteed. ------------------------------------------------------------------------------------------------------------------------------- Search words(For official use only) - Bunker Tanker Ship Design for Sale - 750dwt Bunker Tanker Ship Design 750dwt Bunker Tanker Ship Design for Sale Small Tanker Ship Design for Sale Mini Tanker Ship Design for Sale - overall 45m in length -----------------------------------------------------------------------------------------------------------------------------------
Williams LLDH Used Drilling Rig for Sale Foundation / Caisson Drilling Rigs Model : LLDH Manufacturer : Williams Year : N/A Condition : Used Description Capable of drilling 80' ft deep and 60-72" inches in diameter It has been reconditioned in 2002 Very good working condition Located in Europe
--------------------------------------------------------------------------------------------------------------------------------------- Search words (for official use only) - Williams LLDH Drilling Rig for Sale Used Drilling Rig Williams LLDH for Sale Oilfield Drilling Rig for Sale in Europe Foundation Drilling Rig - Williams LLDH Williams Drilling Rig for Sale in Europe Foundation / Caisson Drilling Rigs for Sale Williams Used Oilfield Drilling Rig for Sale ---------------------------------------------------------------------------------------------------------------------------------------
RD20 Range III Land Rig for Sale RD20 Drilling Rig - Used 2003 Ingersoll-Rand RD-20
2003 Ingersoll Rand RD-20 : Range 3 New 7 rod carousel 3412 Cat deck engine - rebuilt by Cleveland Brothers in October, 2008 New Radiator October, 2008 Four axle crane carrier with 10,022 miles on it.
Trailer mounted Fuel / Air unit : Four compartment lubricant tank Three thousand gallon diesel fuel tank 2008 Ingersoll Rand 1170 Air-Pac
Trailer mounted Dog house : 40kw Generator Cellular phone system Electric heat Fully stocked with all hand tools Various bits, and subs
Two drill steel trailers : Both with drop down tail gates Both with headache racks and tugger winches
Skid mounted 300 barrel water tank
Full length rig sub structure
------------------------------------------------------------------------------------------------------------------- Search words (for official use only) - RD-20 Range III Land Rig for Sale Used RD20 Rig For Sale in USA RD20 Range 3 Land Rig Used RD20 Drilling Rig RD20 Drilling Rig Ingersoll Rand Used RD20 Rig Used RD-20 Land Rig Used RD-20 Range III Land Rig For Sale ---------------------------------------------------------------------------------------------------------------------
Lifting Capacity Crane for Sale 2000 Ton Lift Sheer Leg Crane - For Sale Used 2000 Ton Lifting Floating Crane - For Charter
Principal Dimensions SAM-A 2000 ton F/C Length O.A : 85.000 m Breadth (mld.) : 42.000 m Depth (mld.) : 7.000 m Draft (D.L.W.L) : m Light weight : ton Deck camber : 500 mm Ballast pump : ton/hr Boom angle 65.0 deg. – normal lifting Main hook (500 ton x 4 sets) Lifting capacity : 2000.0 ton Lifting height (from W.L) : 80.000 m Outreach (from bow) : 31.000 m Equipment List Part : Lifting hook Equipment : Capacity / Quantity - Main hook : 500 ton lift / 4 Aux. hook : 200 ton lift / 1 Whip hook : 10 ton lift / 4 Drop hook : 7 ton lift / 2 Part : Hoisting winch Equipment : Capacity / Quantity - Luffing winch : 70/35 ton x 7.5/15 m/min. / 2 Main hoist : 60/30 ton x 12/24 m/min. / 4 Aux. hoist : 30/15 ton x 12/24 m/min. / 1 Whip hoist : 10 ton x 15 m/min. / 3 Drop hoist : 7 ton x 15 m/min. / 2 Assist hoist : 10 ton x 15 m/min. / 2 Part : Mooring winch Equipment : Capacity / Quantity - Aft windlass/winch : 40/20 ton x 6/12 m/min. / 1 Aft mooring winch : 30/15 ton x 20/40 m/min. / 2 Fwd mooring winch : 30/15 ton x 20/40 m/min. / 4 Part : Ballast system Equipment : Capacity / Quantity - Ballast pump : 1000 cub.mt/hr / 2 Part : Crane Equipment : Capacity / Quantity - Hydro-crane : 10 ton capacity / 1 Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. -------------------------------------------------------------------------------------------------------------------------- Search words (for official use only) - Lifting Capacity Crane for Sale Floating Crane 2000ton For Sale Used 2000 Ton Lifting Floating Crane - For Charter 2000 Ton Lift Sheer Leg Crane - For Sale Used Floating Crane 2000Ton 2000 ton Lifting Capacity Crane For Sale Used Lift Sheer Leg Crane For Charter --------------------------------------------------------------------------------------------------------------------------------------
Helideck for sale
The helideck is octagonal in shape with maximum dimensions at 24.02 metres at the extremities, with a minimum deck diameter of 22.2 metres from the fore edge of the deck to the 210 deg chevron. This dimension results in a ‘D’ rating of ‘22’ for the deck. The deck has a rated maximum gross tonnage of 13000 Kg (13 tonne) giving a ‘T’ value of 13. The deck is constructed of extruded aluminium plate with a raise friction profile surface. The deck is surrounded by a PVC coated safety net that protrudes outward 1.5 metre at deck level for most of the perimeter of the deck. A fence consisting of metallic tubing frame borders passenger walkways. These fences are collapsed to deck level during takeoff and landing and erected for passenger safety for embarkation and disembarkation. The aiming circle is situated at centre of the deck. All markings on the deck meet the guidelines provided in CAP437. Design Helicopters : Sikorsky S-92 - 12.83 MT, D= 20.88 m Sikorsky S-61 N - 9.3 MT, D= 22.2 m 210 deg Obstacle Free Sector (OFS) The only obstacles that penetrate the 210 deg OFS on the ship are the passenger handrails. These must be collapsed to deck level during helicopter landings and takeoffs. Lighting : The deck has 26 green perimeter lights set at an average of 2.8 metres apart around the perimeter of the deck. There are 4 deck level Xenon floodlights set at deck at forward port, aft and starboard edges of the deck. These lights meet the specification of the Lancelot Stage 1 floodlighting trial as described in Annex D of CAA CAP 437 (August 2010). Price & terms : Please enquire using the email form below.
The details mentioned above are believed to be accurate but are not guaranteed. ------------------------------------------------------------------------------------------------------------------------------ Search words (for official use only) : New Helideck for Sale Helideck for Sale - New ----------------------------------------------------------------------------------------------------------------------------------
National 1320 SCR Drilling Rig for Sale 2000 hp Land Drilling Rig for sale
Refurbished in 2007 Recertified 2009 Drawworks (Rebuilt in 2009)2000 HP, National 1320 UE drawworks grooved for 1 3/8-drill line powered by 2 – 752 Electric Motors. Brake is 7838 electric power. Brake rebuilt by N.O.V. in 2007 Mast and Substructure Pyramid swing-up type substructure and 157’ mast with 1,000,000# hook load. 25’ floor height with serial numbers. Mast and Sub Level 3 inspection and (Level 3 Re-certification in June of 2009’). Rotary National 37.5 rotary, independent drive with gearbox using GE 752 electric motor. Mud Pumps Two (2) Gardner Denver PZ-11 (Rebuilt in 2009) * powered by two (2) each GE 752 electric motors; K-20 pulsation dampers and charging pumps all skidded. Secondary electric gear end oiler pumps, two electric chain case oilers Generators Four (4) (New in 2007) Detroit 16V Series 2000 Electronic Engines rated at 1500HP. Generators are marathon 950 KW Continuous Prime Power. Three (3) generator sets to run operations with one (1) spare unit. A fifth matching genset is also included. Blowout Prevention and Well Control Equipment (Re-certified in 2009 by Cameron Iron Works with certificates) 13 5/8 10,000 # equipment, Double Ram and Single Ram, 5,000# Annular, complete with drilling spool. 4” HCR Valve and (1) manual valve on BOP’s Two (2) kill side valves and (1) check valve. BOP handling system by J.D. Neuhaus, 50 metric ton capacity 4 button pendant with emergency stop, oiler/lubricator. SCR House Four (4) SCR panels and 4-generator panels GE type. (New in 2007). 2000 AMP Frame, SCR drive is GE Generation III SCR Bridges. MCC is GE Model 7700. Two 5 ton air conditioners, 10 X 40 skid. Mud Pits Solids Control 1400 BBL system, three (3) round bottom tanks. Three (3) Brandt Triple King Cobra II Automated Control Linear Motion Shale Shakers with MA-10 degasser, and (1) 16 – cone desilter with 11 agitators. All Brandt solids control equipment. Two (2) 5X6 centrifugals for feeding desilter and degasser. Two (2) 5X6 centrifugals for feeding hopper and (2) 5X6 centrifugals for transferring mud between tanks. Twin hoppers, skidded with roof for access to bulk hoppers. Manifold 10,000 # rated valves with Manual Drilling Chokes with 36”X 20’ gas buster mounted on skid with manifold and 100 bbl trip tank with two (2) centrifugal pumps for transferring mud. Closing Unit 6 station closing unit with remote in top doghouse. Secondary closing unit; four (4) stations with remote. One electric pump and three air pumps for pressuring system. Water Tank 400 BBL water tank with two (2) 3 X 4 centrifugal to feed rig. Fuel/Oil 14,000-gallon fuel tank with transfer pumps. Lubester for oil storage. Storage 10X40 parts house for storage. Second 10X40 house with crew lockers and work station inside. Doghouse Top Doghouse with auto driller, remote BOP closing unit. Air Compressors Two (2) Sullivan Palatek 50HP Screw Type Air Compressors rated at 210 CFM each. Model SPS-200-116 Dryer. Wireline Survey Model OWI 1600 Explorer Unit .092 line. Auxiliary and Miscellaneous Two (2) air hoists 5 ton each. Pipe racks and catwalk. Surveying Equipment. Assorted handling tools for drill pipe, tongs, elevators, slips, bails, subs and auto driller. 500-Ton National Block Hook . Pipe Spinners 3 ½” to 7”. Access Oil Tools “Back Saver” slip assist. Also Available but Not Included in Price Top Drive: Varco TDS – 11 Top Drive System (New February 2007).Rebuilt in 08’. Drill String consisting of : 18,000’ 5” Drill Pipe S-135 21 – 6 3/4” Drill Collars 30 Jts. 5” HWDP 9 – 8” Drill Collars. Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed.
--------------------------------------------------------------------------------------------------------------- Search words (for official use only) : Drilling Rig - National 1320 SCR for Sale Land Rig Sellers Oil Drilling Rigs for Sale 2000hp oil drilling rigs Oil Rig Sellers 2000hp Land oil Rigs for sale 2000hp Land Drilling Rig Land drilling rigs for sale ------------------------------------------------------------------------------------------------------------------
Showing 1 to 48 of 2131 results
Search Here
