EPA AIM Act enforcement is live. Violations: up to $60,000/violation/day. Are you compliant? →
MODULE
ENERGY EFFICIENCY
Cut Refrigeration Energy Spend by 11–18% — Automatically
Axiom identifies the biggest energy savings opportunities, adjusts setpoints/algorithms directly (with your authorization), prioritizes work orders, and monitors 24/7 to avoid backsliding. Reduce kWh spend - no new hardware required.
Average $12K–$40K in annual savings per site · Utility rebate documentation included · No hardware required
11–18%
average reduction in refrigeration energy spend
$6-26K
average annual savings per site
$0
in hardware or sensor installations required
WHERE ENERGY GOES
Most Refrigeration Energy Waste Is Invisible Without the Right Data
Axiom identifies and quantifies each waste source — then prioritizes optimizations by
dollar impact so you know exactly where to act first.
WASTE SOURCE
TYPICAL IMPACT
WITHOUT AXIOM
WITH AXIOM
RECOVERY
Suboptimal setpoints (case temps set too
low)
4–7% of total refrigeration kWh
Condenser fouling (reduced heat rejection
efficiency)
3–6% efficiency loss per dirty
coil
Night setback not executing as configured
6–10% overnight energy waste
Compressor short-cycling (excessive starts)
2–4% excess runtime
Refrigerant undercharge (reduced capacity,
more runtime)
5–12% energy penalty per
affected circuit
Fan motor inefficiency (dirty evaporators)
1–3% of case energy
Top
25%
energy rank achieved by most Axiom customers within 90
days of onboarding
$26K
average annual savings per site across Axiom customer
portfolio
11
–18%
average total refrigeration energy reduction after Axiom
optimization
11–18%
verage total refrigeration energy reduction after Axiom optimization
$6-26K
average annual savings per site across Axiom customer portfolio
24x7
monitoring to catch unwanted setpoint changes or energy spikes that would otherwise fester for months (or years)
HOW IT WORKS
Controller-Agnostic Integration
Axiom connects to Copeland, Danfoss, Micro Thermo, Atlas, and other major refrigeration controllers. No hardware swaps or new sensors needed to begin optimization.
Identify
Every site and system is different. Sometimes, the biggest energy opportunities can be found in systems that seem to be operating well already
Optimize
Approved setpoint changes, energy optimization strategies, and algorithm updates are pushed automatically to your refrigeration controllers with temperature compliance verified continuously before and after each change.
Dispatch
Energy opportunities that require technician site visits are packaged into clear, rich work orders with quantified energy savings values. Work orders are automatically prioritized so you can address the highest-value energy savings opportunities first.
Ongoing Monitoring and Improvement
Most energy optimizations are reversed within a few weeks, or savings erode over time. AI monitors system performance over time to prevent backsliding and enable continuous improvement over time.
CAPABILITIES
Everything Needed to Run a Real Energy Program
Not dashboards and alerts — an end-to-end energy management system that identifies waste, implements fixes, and documents savings across every site.
Deep Energy Analysis of Each System
Every site and system is different. Sometimes the biggest opportunities can be found in systems that seem to be operating well already. Don’t rely on benchmarking or kWh per square foot.
Automated Setpoint Optimization
Axiom identifies suboptimal setpoints and algorithms, and pushes approved changes directly to refrigeration controllers — while continuously verifying temperature compliance. Axiom can solve many floating SST, floating SCT, and compressor short-cycling issues automatically.
Prioritized Work Orders
Issues like dirty condensers, dirty evaporators, condenser fan outages, and refrigerant leaks require an on-site technician. Axiom triages, batches, and prioritizes energy opportunities based on urgency and value (in the context of all other maintenance and leak issues the store is facing)
Ongoing Monitoring and Improvement
Most energy optimizations are reversed within a few weeks, or savings erode over time. AI monitors system performance over time to prevent backsliding and enable continuous improvement over time.
Savings Verification & Reporting
Realized energy savings are modeled, calculated, and tracked for each site each month, giving finance and facilities a single source of verified energy savings data.
Controller-Agnostic Integration
Axiom connects to Copeland, Danfoss, Atlas, and nearly every major refrigeration controller. No hardware swaps or new sensors needed to begin optimization.
SETPOINT OPTIMIZATION
Catch Set Point Changes Immediately and Optimize Temperatures
Set points get changed all the time. Some changes are unauthorized. Some are meant to be temporary, but end up becoming permanent. Additionally, many case temperatures are 2-4 degrees Fahrenheit colder than product safety requires. Suboptimal set points can cost thousands of dollars per site per year. Axiom identifies the gap, models the optimal set point, and pushes the change with continuous compliance verification so food safety is never at risk.
✓
Constant monitoring of set points to detect unauthorized changes
✓
Advanced modeling defines the optimal set point
✓
Changes are reviewed by a refrigeration specialist before any change is pushed
Approved changes deployed automatically to save energy
✓
✓
Continuous post-change verification with instant rollback if limits are approached
6-25%
typical energy saved from setpoint alone
100%
continuous compliance verification
$5K-30K
average annual setpoint
savings per site
PORTFOLIO ENERGY INTELLIGENCE
Prioritize the Largest Energy Opportunities Across Sites
Every site and system is different. Sometimes the biggest opportunities can be found in systems that seem to be operating well already. Don’t rely only on benchmarking or kWh per square foot to optimize energy consumption - that’s just part of the story.
✓
Advanced modeling compares actual system performance to ideal system performance
✓
Energy consumption normalized for weather, store operations, equipment configuration and age, refrigerant type, etc.
Exportable savings reports for executive and utility submissions
✓
✓
Some energy opportunities are automatically resolved (with your permission)
Work orders are prioritized based on value ($ savings per year)
✓
Savings verification and reporting is available in one click for finance and facilities teams
✓
11-18
%
average portfolio energy reduction
$40K
max annual savings achieved at a single site
LIVE DEMO
Watch How Axiom Works — From 200,000 Data Streams to One Prioritized Service Call
A real walkthrough of how Axiom serves a 500-site grocery portfolio every month — from data collection to prioritized dispatch to validated outcomes.
-
200,000+ live data streams collected from existing controllers — cleaned, labeled, and normalized in real time. Data that was previously overwritten in 72 hours is now a continuous intelligence layer. No new hardware, no site visits.
-
AI and US-based refrigeration specialists surface ~100 predictive anomalies hidden in the data — each packaged with root cause, exact location, financial cost of inaction, and step-by-step fix instructions.
-
Axiom triages: 20–40 low-priority items filtered out, 10–30 issues resolved remotely without a truck roll. The remainder are batched into ~15 prioritized in-person service calls. Your ONE most important action today is always clear.
-
Every outcome validated against live data — not technician notes. Service calls avoided, costs saved, and equipment lifespan extended are quantified and reported at the end of every month.
DOWNLOAD CASE STUDIES
THE DASHBOARD
Your Full Portfolio Energy Picture, In One View
Energy rank, waste driver breakdown, optimization status, and verified savings — visible across every site without switching tools.
Waste Driver Attribution
Each site shows exactly which waste source is driving its rank — setpoints, condenser, night setback, or refrigerant — with projected recovery amount.
Optimization Push Status
See which sites have pending, approved, or deployed setpoint changes — and whether compliance has been verified post-push.
Verified Savings Tracker
Baseline-normalized savings tracked per site and per month — with one-click export for finance and executive reporting.
THE FULL PLATFORM
Works Alongside Every Axiom Module
Energy Efficiency shares the same data streams as Early Leak Detection and
Predictive Maintenance — one platform, one connection, four overlapping value
streams.
REQUIRED MODULE
Enterprise Visibility
One dashboard for all sites — unlimited historical data, predictive anomalies prioritized to drive results, an AI Insights agent, all integrated with your CMMS.
MODULE
Early Leak Detection
Catch refrigerant leaks days or weeks before they trigger an EPA report — across every site in your portfolio, with exact location and leak rate estimates.
REQUIRED MODULE
Predictive Maintenance
Surface compressor degradation, condenser fouling, and mechanical failures before they cause downtime — with AI-generated work order descriptions and fix instructions.
Get a Custom Energy Savings Estimate
Tell us about your portfolio and we’ll show you how Axiom can drive significant savings on your energy budget - starting in the first month.