Related keywords
Related Products
Support
FAQs
Camera is connected to an AVYCON NVR - Connect the camera directly to the PoE port in the back of the NVR, and the camera will appear on the screen after about 1 minute. If the camera does not appear online, enter the password of the camera.
Standalone camera - Connect your camera to a PoE switch or to an appropriate power source. Find the IP address of the camera and add it to your CMS software or AVYCON ONE app, or view the camera on your web browser by typing in the IP address.
Check out this YouTube Video for a setup tutorial youtube.com/watch?v=6lW1HzT2uUM&pp=ygUUYWRkaW5nIGNhbWVyYSBhdnljb24%3D
Camera is connected to an AVYCON NVR - Navigate to the camera settings: Settings > Camera > IP Cameras. You will see a list of cameras displayed. Locate your camera on the list and you will find the IP address listed under the “IP Address” column.
Standalone Camera - Follow this link to download and install the IP Device Tool for your computer
Once you install the IP Device Tool, make sure that your computer and recorder are on the same IP range then click Search on the IP Device Tool. Match the device information with your cameras to find the IP address.
Note: Your devices will be on the same IP range if they are connected to the same router and if they both have DHCP enabled.
There is no default password set on the cameras and recorders. User will need to set a new password for cameras and recorders when it is first installed.
Camera connected to NVR – Cameras connected to the PoE ports in the back of the NVR will get a default password set by the NVR if there is no password set for the camera previously.
Camera Username: admin
Camera Password: admin123.
Standalone Camera - If the camera is factory defaulted, you will need to either use the IP Device tool to set a new password or access the web portal to set a new password.
Yes, if the third-party camera supports ONVIF you can add third-party camera with ONVIF protocol.
On some third-party cameras, ONVIF profile needs to be enabled in order to add it to AVYCON NVR. You will need to type in the IP address of the camera into your browser to access the web portal of the camera then configure / enable the ONVIF profile.
Connect the LAN 1 port to your router and the LAN 2 port to the network PoE switch. Connect the cameras to the network PoE switch. You can either use the IP Device Tool by connecting a PC to the same network PoE switch then set each camera a unique IP address that is matching the subnet of LAN 2 network or use the Auto Add Camera feature on the NVR to add cameras automatically.
Plug in a monitor and mouse to your recorder. Click the start icon to open the settings menu then go to Network TCP/IP page. The IP address of the recorder should be shown on the TCP/IP page under Network.
Alternatively, you can install the IP scanner tool and search for your recorder on your computer’s while they are on the same local network.
Install the AVYCON ONE app on your phone. On your NVR, open the system information settings by clicking the “i” icon at the bottom right of the screen. From the mobile app, tap on the circle icon with 3 dots on the top left of your screen then go to Device List to click the + icon. Scan the QR code and follow the on-screen instructions to complete the setup.
Install the CMSONE software using the link below :
Follow this path on the CMSONE software to connect add the recorder : Home icon > Device Management > Plus icon. Type in the recorder’s information and click add.
Mainstream: a high resolution video live streamed and saved to the HDD on the recorder. The resolution can be lowered or raised to change the file size and available recording time.
Substream: This stream is typically used for streaming multiple live video feed from the phone app or computer software. It is a lower-quality view, allowing you to view many cameras simultaneously and smoothly.