Welcome to ALBERT KUHN!

Manual drum opener with explosion-proof blade Features: Suitable for all metal drums with a capacity of 50–225 liters For sheet metal up to 1.5 mm thick Smooth, clean cut Blade made of spark-free steel, grade 2550 Explosion-proof Optimal leverage thanks to extra-long operating handle Manual drum opener Manual drum cracker

Model no.:

29/6

Pressol Akku-Fettpresse mit ZBH 20 V 18051 Cordless grease gun 20 V Professional with 1000 mm high-pressure rubber hoseand 4-jaw hydraulic gripper mouthpiece Suitable for: loose grease 400g grease cartridges according to DIN1284 Lube-Shuttle screw-in cartridges (adapter AK185019) 500g screw-in cartridges / Fuchs-Rainer (adapter AK185020) Specification: 20 V battery-powered electric motor Delivery rate/battery charge approx. 25 400 g cartridges (without back pressure) approx. 7 400 g cartridges (at approx. 100 bar back pressure) 2 lithium-ion batteries 20 V, 2000 mAh (18 051 100) Operating pressure max. (bar/psi) 400 / 5800 Maximum pressure (bar/psi) 680 / 10000 Filling nipple (12 672) and bleed valve (85 277) High-pressure grease delivery hose with anti-kink spring, 11 x 1000 mm (18 042) Precision nozzle, M 10 x 1 i, with valve (12 642) Reducer, G 1/8” i, M 10 x 1 a (12 016) and reducer, NPT 1/8‘’ i, M 10 x 1 a (12 020) Galvanized grease gun tube Angled mouthpiece with quick coupling (12 040) Battery charger 230 V (18 051 200) The device is equipped with a stand and hose holder Support feet for easy handling, stable hold 1 shoulder strap Packed in a carrying case, plastic, black Special features: The device processes greases up to NLGI 2 at 20 °C Integrated display with indication of grease delivery rate, battery charge status and volume on pressure The display flashes red if the back pressure is present or the power consumption is too high Alarm for fat loss - fat quantity counter stops 2 adjustable grease feed speeds (L-H) Molded sleeve with tight fit for loose grease or cartridges Battery charge status is displayed on the grease gun and on the battery Charging time is approx. 60 minutes Secure handle on the push rod Optimum localization of the lubrication area by means of LED light, e.g. for lubrication nipples that are difficult to access or in poor lighting conditions Anti-kink springs prevent kinks in the hose and extend the service life Venting by means of a venting valve or by half a turn of the grease gun tube

Model no.:

1290

Basic Equipment Box For smaller crack sealing and repairing tasks Contents: • 1x heavy duty hand lever injection gun (with pressure gauge on request) AK177067 • 2x 1.3 kg 1-component injection resin with self-healing effect / AK177100 • 1x 1 Liter cleaning fluid for injection gun / AK177105 • 50x plastic injection packesr 10x100 / AK177136 • 50x plastic injection packers 10x75 / AK17735 • 25x steel injection packers 10x115 /AK177122 • 25x steel injection packers (one day packer) 10x115 / AK177132 • 25x adhesive packer / AK177141 • 4x HD injection hose including 4-jaws coupling / AK195070 • 1x Festool SYSTAINER M237 storage box / AK179000 • 1x full-vision safety glasses / AK179001 • 1x nitrile gloves size. 10/AK179002 • 1x hammer drill SDS-PLUS 10x265 / AK179003 • Instructions and leaflet

Model no.:

INJECT ALL IN 1

Hand lever grease gun set 1 consisting of: • Hand lever grease gun E470 • Rubber armoured hose 195817/300, incl. hydraulic coupling • packed in a plastic bag Features of hand lever grease gun: • Sturdy design made of steel, • painted silver with red handle sleeve and filling nipple • M10 x 1.0 connection thread • Double sleeve also enables filling by suction • Wide swing-out lever indicates delivery rate (0-1.5 ccm) • Filler neck on the press head for quick filling with AKA grease gun filling device or using a 400 g standard grease cartridge • for 400 g grease cartridges or 500 ccm loose grease • Original carton 25 pieces • from 480 pieces also available with customised embossing of your company data • MADE IN GERMANY Dimensions hand lever grease gun: • Ø 56.5 x 300 mm • Cartridge Ø 53.5 x 235 mm • Length 400 mm • Delivery rate / stroke 1.4 ccm • Pressure 400 bar Features Rubber armoured hose: • with 4-jaw grip nozzle • for nipples DIN 71412 • Interchangeable connection heads • Connection fittings with hexagon • Connection thread AG-M10x1.0 Dimensions Rubber armoured hose: • Total length 300 mm • Burst pressure 1650 bar • Hose Ø 13 mm 3052300 098600

Model no.:

E470-Set-1

Hand lever grease gun set 3 consisting of: - Hand lever grease gun E470 - Plastic armoured hose 195817/300-L, incl. hydraulic coupling - packed in display carton Features of hand lever grease gun Sturdy design made of steel, painted silver with red handle sleeve and filling nipple M10 x 1.0 connection thread double sleeve also enables filling by suction wide swinging lever indicates delivery rate (0-1.5 ccm) Filler neck on the press head for quick filling with AKA grease gun filling device or using a 400 g standard grease cartridge for 400 g grease cartridges or 500 ccm loose grease Original carton 25 pieces from 480 pieces also available with customised embossing of your company data MADE IN GERMANY Dimensions hand lever grease gun : Ø 56.5 x 300 mm Cartridge Ø 53.5 x 235 mm Length 400 mm Delivery rate / stroke 1.4 ccm Pressure 400 bar Features Plastic armoured hose : with 4-jaw grip nozzle for nipple DIN 71412 Multi-layer high-pressure hose Connection fittings with hexagon connection thread AG-M10x1.0 Dimensions plastic armoured hose : Total length 300 mm Burst pressure 1000 bar Hose Ø 9 mm 30 522 01 Mato

Model no.:

E470-Set-3

Aluminum injection packer Features: • 13 x 100 mm • Includes conical head injection nipple • With double rubber grip

Model no.:

Aluminiumpacker 13x100

Piston-type grease gun for grease and oil with combination nozzle (hollow and pointed nozzle) for grease nipples DIN 3402, DIN 3405 and DIN 71412, Capacity 120 ccm Features: High-quality impact pressure gun can be used for grease and oil First-class Swiss quality product! Robust and clean design Painted steel Sleeve made of synthetic rubber Connection thread G1/8” With combination nozzle for grease nipples DIN 3402, DIN 3405 and DIN 71412 Dimensions: Capacity 120 ccm Total length 300 mm Ø container 40 mm max. pressure 150 bar = 3195200

Model no.:

195/KM

Metal gasoline canister/fuel canister 20 liter capacity in accordance with DIN 7274 Features: • Double stove-enameled inside and outside • Made from high-quality sheet metal • Excellent quality grade and electro-automatically welded • Offers absolute gasoline resistance • With the familiar quick-release fastener and safety pin • DIN 7274 • TÜV-tested • UN-approved • Capacity 20 liters • Color olive green RAL 6003 External dimensions: 470 x 345 x 165 Also available individually! Gasoline cans in explosion-proof design and other colors available on request! All fuel canisters (UN/RKK) must be labeled by the end user in accordance with the GHS/CLP regulation as of June 1, 2015. Our canister adhesive labels are used for labeling.

Model no.:

30/1-20

Assortment of protective caps for flat grease nipples M1, 60 pieces, 4 colors Filling: 15 pieces - red 15 pieces - yellow 15 pieces - green 15 pieces - Blue Features: without underwire Dimensions of assortment box: 120x205x44 For grease nipples to DIN 3404 with 16 mm head Suitable for grease nipples M1 - M2 - M5 - M5/A - M6 - T1 - T2 - T8

Model no.:

959-Set

DIY Crack Repair Set 2-K LARGE For sealing cracks up to a length of approx. 1.25 to 2.0 meters (no guarantee). Scope of delivery: 1x injection press E470-ZEM-VZ 1x high pressure injection hose 300mm 1x 4-jaw hydraulic clutch 1x 2 liter 2-component injection resin 20x injection packers made of brass 115x10 - with conical grease nipple 1x safety glasses 1x protective gloves 1x 5L plastic bucket for mixing

Model no.:

Rissverpressung SET GROß - 2K

Glue saving container with brush, 0.9 ltr. Features: Made of impact-resistant, unbreakable plastic (Hostalen) Capacity 0.9 liters For liquid adhesives, glues, solvents and thinners, paints, varnishes and finishes that are applied with a hand brush. High chemical resistance, even to hydrochloric acid. (Resistance table available on request.) Clean and convenient dispensing due to low material level.

Model no.:

14/6-0,9

Multi-purpose oval tub, made of polyethylene, 15 liters. Features: Multi-purpose oval tubs, made of polyethylene With 2 handles on the edge Mixed colors Capacity 15 liters Dimensions: 450 ×370×200 mm

Model no.:

18/11-1

Clearance items - Clearance items in a simple steel design, some with imperfect paint finishes. Barrel stand for 50-60 L barrels, collapsible, height approx. 50 cm Features: • Made of painted angle iron • Collapsible • Easy to transport Dimensions: • Total height: approx. 50 cm • Length: 57 cm

Model no.:

26/5

Winkelölstandsanzeiger mit Schraubstück DIN 3018/E Nennhöhe 125 mm, Gewinde G3/8" Eigenschaften: • Winkel-Ölstandanzeiger mit getrenntem Einschraubzapfen aus Messing nach DIN 3018/E • mit Schutzrohr • Naturglasrohr • Temperaturbeständig bis 80°C (NBR Innendichtungen) • Entlüftung im Deckel • ohne Außendichtung • Lieferbar auch mit metrischen Gewinden und Klappdeckel Maße: • Ø Schutzrohr 16 mm • Gewindelänge 12 mm • Nennhöhe 125 mm Standardausführung DIN 3018/E - auf Wunsch auch in DIN 3018/D . Sichtfenster vorn. Auf Anfrage mit Borosilikatglas und Vitondichtung bis 180°C lieferbar. Zwischengrößen und längere Anzeiger auf Anfrage. Die Nennhöhe wird von der Mitte Vierkant bis zur Oberkante gemessen.

Model no.:

232/G-125G3/8''

Ölaugen aus Polyacryl ohne Reflektor Eigenschaften: • Ölstandaugen aus glasklarem Polyacryl • ohne Reflektor • für niedere Drücke 1-2 bar • einschließlich Dichtung • Auslaufmodell Maße: • D - 50 mm • d1 - 35 mm • e - 5 mm • f - 13 mm • g 3,2 mm Nicht zu verwenden für Lösungsmittel, Alkohole, Benzol etc.

Model no.:

240-M42X1,5

Flat grease nipple Features: M1 G1/4” 16 mm head SW 17 DIN 3404 Form A Brass

Model no.:

M1-G1/4''MS

Oil pressure gun with pointed nozzle, capacity 180 ccm Features: made of galvanized steel with hydraulic nozzle M9x1.0 connection thread Enables variable lubrication pressure with even force even with high back pressure. Designed for rough use. Robust and thick-walled cylinder with strong non-slip cord - secure grip Dimensions: Capacity 180 ccm Total length 240 mm Press body length 140 mm Ø container 44 mm Max. pressure 300 bar Delivery rate 0.6 g/stroke Particularly suitable for low-viscosity oils.

Model no.:

180/SP

Angle oil level indicator DIN 3018/C Nominal height 150 mm, thread G3/8" Features: - Angled oil level indicator with fixed brass screw-in spigot to DIN 3018/C - with protective tube - Natural glass - Temperature-resistant up to 80°C (NBR inner seal) - Ventilation in the cover - Without outer seal - With cleaning screw and lock nut Dimensions - Ø protection tube 13 mm - Thread length 23 mm - Nominal height 150 mm Standard version DIN 3018/C - also available in DIN 3018/B on request. Inspection window at the front. Available with borosilicate glass and Viton seal up to 180°C on request. Intermediate sizes and longer indicators on request. The nominal height is measured from the center of the square to the top edge.

Model no.:

222-150G3/8"

Funnel grease nipple Features: with slot - without collar with slot for screwdriver for recessed installation M8x 1.0 Form A Bright zinc-plated and passivated steel

Model no.:

DV1-M8X1,0

Flat head grease nipple Features: M1 G1/4” 16 mm head SW 17 DIN 3404 Form A Galvanized steel

Model no.:

M1-G1/4''

Plexiglass oil level window Features: without drain plug made of Plexiglas 8 mm thick without reflector Temperature resistant up to approx. 70°C Loadable up to 1 bar including sealing washer made of NBR 60 light Dimensions a - 125 mm b - 31 mm c - 99 mm d - 13 mm e - 45 mm f - 22,5 g - 4.2 mm 6 holes

Model no.:

246-125

Lubricating wick, Ø 2mm braided

Model no.:

Schmierdocht, Ø 2mm

Lubricating wick, Ø 5mm braided

Model no.:

Schmierdocht, Ø 5mm

Eimer aus PP_spezial, 10,0 Ltr. elektrisch leitfähig, mit Deckel Eigenschaften: • UN-bauartgeprüft, Zulassung gemäß aktueller Zulassungsübersicht • Robuster Eimer, hergestellt aus Material PP Spezial • straff sitzender Schnappdeckel für sicheren Transport • Metallbügel für zuverlässiges Heben / Tragen • Mittels Siebdruck gestaltbar, auf Anfrage • Elektrische Ableitfähigkeit durch Ruß-Anteil im Basismaterial sichergestellt • Oberflächen- und Durchgangswiderstand größer 1E08 Ohm, typ. 1E06-1E07 Ohm • Auf Anfrage auch in 6L und 30L erhältlich Maße: • siehe Datenblatt

Model no.:

36/12-10

Plastic sprayer/atomizer, 600 cc Spray jet continuously adjustable Features: • Container also suitable for disinfectants • Capacity 600 cc

Model no.:

13/9D

Plastic connector Features: • Hose thread: 8 mm • Hexagon: 13 mm • Length: 68 mm • Free passage: Ø 3 mm

Model no.:

Verbindungsstück 8 mm

Hose Packer Features: ⦁ Made of galvanized steel ⦁ Includes pre-assembled M6x1 conical nipple ⦁ With hose nozzle connection Ø 7 mm ⦁ Suitable for injection hoses with an ID of 6 mm ⦁ Fastening with a 2-ear clamp is recommended Dimensions: ⦁ Total length: 49 mm ⦁ Connection length: 32 mm ⦁ Collar: 10 mm

Model no.:

Schlauchpacker Stahl Kegel

Cleaning brush with eyelet holder made of steel wire for thorough cleaning of drill holes. Features: ⦁ Ensures optimum hold of screw packers and impact packers ⦁ Specified in many building inspectorate approvals ⦁ Higher quality of injections Especially when using injection/composite mortar, the drill hole must be cleaned of drilling dust and blown out beforehand! Technical data: ⦁ Steel wire bristles ⦁ Brush length: 100 mm ⦁ Total length: 300 mm

Model no.:

Bohrloch Bürste 10 mm

This impact aid has been specially developed for plastic lamellar impact packers with a diameter of 12 mm. It enables the packers to be driven into the hole easily and precisely without damaging the material or the valve. The tool is robust, durable, and ideal for daily use on the construction site. Product details: - Suitable for plastic lamellar packers - Suitable for Ø 12 mm - Sturdy design for professional use - Ensures a secure fit and damage-free driving - Ideal for injection technology and building waterproofing

Model no.:

Einschlaghilfe für LSP 12 mm