3D Lab Tech

3D-Lab-Tech-logo
Menu
Menu
slice-Engineering-Logo

Mosquito Hotend

The hotend is one of the most critical parts of any printer. It’s job is to efficiently melt filament and allow the melted material to flow smoothly. Why would you use something that is poorly designed and prone to failures? If you’ve been printing long enough I am sure you have had experiences with unreliability, jams and heat creep or all of the above. A hotter hotend can fix these problems. Slice Engineering hotends can print upwards of 450C. With their patented design they have eliminated these common problems, reduce fan noise, and improve speeds by up to 30%.
Print like a pro with Slice Engineering hotends.

Mosquito Spare Parts

Copperhead Hotend

Which Heatbreak Do you Need?

The Copperhead hotend was designed to be very modular and able to be retro fitted to just about any 3D Printer on the market. If you want a whole hot end replacement then start from the Copperhead heat sink, add the bimetal heat break, and heater block. You can also decide to just replace the heatbreak or just the heater block. You are in control of what you want to upgrade on your current setup but to get the best performance a matching set is advised.

Standard Heatbreak G2
Copperhead™ Heat Sink & Raise3D Pro2

RepRap 1.75 Heatbreak
E3d Titan, E3D v6, E3D Volcano, Prusa MK2/MK2S/MK3/MK3S, Artillery Sidewinder X1 v1/v2/v3

MK8 Heatbreak
Lulzbot Taz 6 Hexagon, Makerbot Replicator 1/2, MK8 Hot Ends

MK10 Heatbreak
Monoprice Maker Select 3D Printer V2, Wanhao i3/Duplicator 4X/Duplicator 4S, Qidi Tech X-Pro/I, PowerSpec 3D Pro/3D X/Ultra Printer, MakerGear M3/M2 Series, FlashForge Creator Pro/Creator X/Dreamer, Dremel Idea Builder, Cocoon Create 3D Print

C-E Heatbreak
Creality CR-10/CR-10 Mini/CR-10 S4/CR-10 S5/CR-10S, Creality Ender 3/Ender 3 Pro, Creality Ender 5/Ender 5 Plus/Ender 5 Pro

C-Pro Max Heatbreak
Creality CR-10 Max/CR-10S Pro/CR-10S Pro v2

LGX Heatbreak
Bondtech LGX eXtruder

Nozzles

Vanadium Nozzles

What does the man of steel Superman have in common with Slice Engineering Vanadium nozzles? They are both virtually indestructible. Slice Engineering went a little overboard when they made their Vanadium nozzles. They are hardened and tempered to 65 Rockwell C all the way through the substrate and not just the surface. They are hard to the core and crafted from vanadium-alloyed high speed steel for superior abrasion resistance at any temperature.

They are so tough they offer a lifetime warranty against abrasion!
It will be the last nozzle you ever need to buy!

Accessories