koobm
Forum Replies Created
-
Same issue here, contact forms (CF7) on multiple sites broke after applying recent updates. Some sites show the yellow CF7 error message, others show a green success message but the mail is never sent.
Configuration is the same on all sites: Turnstile integrated with Simple CF Turnstile, enabled for CF7.
The corresponding CFT integration option in the CF7 plugin is not used.Completely deactivating Turnstile helps, so it’s clearly linked to it.
Fixed with v1.2.36, thank you!
Thanks for the update! Don’t worry about ETA, this issue is not at all urgent to me. It’s merely cosmetic.
I’d only prefer if you didn’t mark it as resolved prematurely. Be assured that I’d update the status myself after a successful retest.
Hello,
I replicated the issue in a sandbox WP instance. Amelia version 1.2.32 (latest). Recording:
https://temp.koob.net/WP%20Amelia%20-%20Booked%20slots%20not%20displayed%20on%202nd%20entry.movHere the service is configured for a duration of 30min, time roster is 15min. When the popup is opened the first time you’ll see that the start time of 09:00 is marked as unavailable. On the second time, the 09:00 entry is completely missing in the list.
Hi,
Wew, that was quick. Highly appreciated!
I retested successfully. Issue is resolved.All the best!
This must be a misunderstanding, I’m using the free version.
Forum: Plugins
In reply to: [Qi Blocks] v1.4.2: Counter and Countdown lost stylingFixed with 1.4.3, thanks.
Forum: Plugins
In reply to: [Advanced Excerpt] Kadence Block Code Shows in ExcerptJust setting up a new project based on Kadence, and I experienced a similar issue with Advanced Excerpt. On the blog (archive) page, Kadence block code is included in the excerpt, but only from the second blog post. The first one looks good.
My blog posts all start with an Kadence Advanced Text block, followed by a “More” separator. The issue can be mitigated by changing the first block from Advanced Text to a standard Gutenberg Paragraph block. But that’s not a solution my customer is going to accept.
I applied the new version and ran the import again. Looks great. No issues during import or report generation. No new “Got invalid response from API request” errors in the log so far (but I’ll keep looking out for the next 24h hours).
The “incomplete reports” I mentioned earlier are also gone. I guess these were just side effects from the aborted report generation run due to disconnection.
And all my users are very happy with “this new statistics tool”. Thanks for your great support, and to everyone involved!!!
Hey @dizzyatinnocraft, just a quick info: Had a busy week and wasn’t able to test that version yet. I’m going to check it on Friday latest. Will keep you updated.
Update: Now the log periodically shows errors from the cron run.
archive_main 2024-11-21 15:52:40 1 total errors during this script execution, please investigate and try and fix these errors. => CronArchive.php:473; CronArchive.php:468; CronArchive.php:226; Access.php:567; CronArchive.php:221; ScheduledTasks.php:378; class-wp-hook.php:322; class-wp-hook.php:348; plugin.php:565; wp-cron.php:191;
archive_errors 2024-11-21 15:52:40 'Got invalid response from API request: ?module=API&method=CoreAdminHome.archiveReports&idSite=1&period=year&date=2024-01-01&format=json&trigger=archivephp. Response was \'{"result":"error","message":"Label column not found in the table to add in addDataTable(). Row: array ( \'label\' => NULL, \'nb_visits\' => 1, \'nb_uniq_visitors\' => 1, ) - in plugin Actions."}\'' '1 total errors during this script execution, please investigate and try and fix these errors.' => ScheduledTasks.php:392; class-wp-hook.php:322; class-wp-hook.php:348; plugin.php:565; wp-cron.php:191;Hi @dizzyatinnocraft, I can confirm this version fixed the freezing issue after import of the first day. All relevant days (a full year) were imported within roughly 30-45 minutes, no error messages occurred anymore. The importer looks good now from my perspective. Thanks a lot!
Unfortunately my SSH connection was lost and the process cancelled during the report generation phase (somewhere around 60-90 minutes in). Not sure if this is an actual problem, the daily/weekly/monthly visitor info is all there. Only some special reports (e.g. time of day; devices) look incomplete. Not too much of an issue, I could live with that. Just out of curiosity, I found that in Matomo onPremise the report generation can be re-initiated. Is there also a way to do so in the WordPress version?
Thanks and all the best!
Yes, I could do that.
Hey there,
Thanks, highly appreciate the quick response and your efforts! But I’m afraid that it didn’t work out as expected.
I reinstalled Matomo on my last site which hasn’t been migrated yet and ran the importer. This is the full log (DB name replaced) – after the first day it tried to import, it’s frozen:[info] Starting wp-statistics import
[notice] Importing data for date 2023-11-16...
[info] Importing data for the PagesImporter plugin.
[debug] Import 0 search keywords...
[debug] Import 10 global pages...
[debug] Import 20 page titles...
[info] Importing data for the ReferrersImporter plugin.
[debug] Import 2 referrers...
WordPress database error Table '<DATABASE_NAME>.wp_statistics_search' doesn't exist for query select engine, count(visitor) AS nb from wp_statistics_search where last_counter = '2023-11-16' group by engine order by engine; made by include('phar:///usr/bin/wp-cli/php/boot-phar.php'), include('phar:///usr/bin/wp-cli/vendor/wp-cli/wp-cli/php/wp-cli.php'), WP_CLI\bootstrap, WP_CLI\Bootstrap\LaunchRunner->process, WP_CLI\Runner->start, WP_CLI\Runner->run_command_and_exit, WP_CLI\Runner->run_command, WP_CLI\Dispatcher\Subcommand->invoke, call_user_func, WP_CLI\Dispatcher\CommandFactory::WP_CLI\Dispatcher\{closure}, call_user_func, WpMatomo\Commands\MatomoCommands->importWpStatistics, WpMatomo\WpStatistics\Importer->import, WpMatomo\WpStatistics\Importer->import_day, WpMatomo\WpStatistics\Importers\Actions\ReferrersImporter->import_records, WpMatomo\WpStatistics\Importers\Actions\ReferrersImporter->import_search_engines, WpMatomo\WpStatistics\Importers\Actions\ReferrersImporter->get_keywords_and_search_engine_records
[debug] Import 0 search engines...
[info] Importing data for the UserCountryImporter plugin.
[debug] Import 2 countries...
[debug] Import 6 regions...
[debug] Import 9 cities...
[info] Importing data for the DeviceDetectionImporter plugin.
[debug] Import 5 browsers...
[debug] Import 4 platforms...
[info] Importing data for the VisitorsImporter plugin.
[debug] Import 12 visits...
[info] Importing data for the VisitsTimeImporter plugin.I found this commit in WP Statistics where they removed the whole DB table. Seems like that change was delivered with version 14.11 (the one in which they also announced the “Pro” version of their product), which according to their Github was rolled out 2 weeks ago.
I actually don’t care much about the referrer history, but the importer being frozen after day 1 is a real problem.
Same issue here. I’m using lastest version of Cerber on three sites, only on one of them the “Protect Admin Scripts” switch is inactive / greyed out. Can’t figure out the reason, settings are same on all sites.
Unfortunately this support forum doesn’t seem to get a lot of attention from the author, given the high number of unanswered threads.