WiPry 3.1 - App Store

---

About WiPry

ACCESSORY REQUIRED FOR FULL FUNCTIONALITY AND TO EXIT DEMO MODE. Transform your phone or tablet into a Wi-Fi spectrum analyzer (2.4 & 5 GHz) with the WiPry 2500x. This ultra-portable tool is perfect for IT professionals...

ACCESSORY REQUIRED FOR FULL FUNCTIONALITY AND TO EXIT DEMO MODE. Transform your phone or tablet into a Wi-Fi spectrum analyzer (2.4 & 5 GHz) with the WiPry 2500x. This ultra-portable tool is perfect for IT professionals and wireless network technicians. On the hardware side, the WiPry 2500x is slightly larger than previous versions but still small enough to compare to a quarter. Additional space was added to allow for external charging (4 AAA alkaline batteries). This provides full functionality for newer iOS devices including SSID’s. Highlights include: - 2.4 GHz & 5 GHz Spectrum Analyzer - Scan & Troubleshoot WiFi - SSID's / RSSI - Cross-platform support (works with any device) On the software side, significant improvements have been made including: - Play / Record (helps in capturing intermittent environmental issues) - Enhanced Reporting Function (birth certificates track Wi-Fi health) - SNR / SINR automatic calculation (speeds up site evaluation) - Combined view for the real view and waterfall that gives you a history of the transmissions One of the benefits of these software improvements is that there is no software subscription charge. Software is free of charge and available through the user's preferred platform. Although demo mode is available for free with this download, an accessory must be purchased to fully enable the product. Don’t have the accessory? You can still take the app for a test drive. There are several demo wave forms (WiFi, DECT, and DSSS) that simulate signals. Check it out today! The WiPry family of products has an impressive legacy with the following awards: - Ranked #1 Value and #1 Most Innovative RF tool by Frost & Sullivan - Won Ultimate Wireless Product for 2016 as recognized by EETimes & EDN - 2015 R&D Award Finalist (one of the 100 most technologically advanced innovations) - ECN Impact Finalists as one of the "best and most innovative in the design engineering world" As a spectrum analyzer, WiPry 2500x allows you to scan & troubleshoot WiFi. View SSID’s and RSSI on your iOS device. This spectrum analyzer gives you multiple visualization techniques to view the occupied spectrum. Waterfall mode allows you to look at the spectrum over time while the raw, decay, average, heat map, and other modes allow you to view the real-time spectrum. It is perfect for detecting open Wi-Fi channels and identifying unauthorized Wi-Fi access points. Please visit us at www.oscium.com for more details. Please note that customers with previous generations of our hardware (such as WiPry 5x, WiPry-Spectrum, WiPry-Power, WiPry-Pro, WiPry-Combo, and WiPry-Pro Combo) will be able to use this app on older iOS devices.

Version History Bug fixes 3.1 07/30/2019 Oscium is introducing two new spectrum analyzers!! WiPry 340x - Covering frequency ranges 300-348MHz and 387-464MHz WiPry 790x - Covering the following frequency ranges: USA (902-928MHz) China (755-787MHz) Europe (863-868MHz) Japan (916-928MHz) Korea (917-924MHz) Singapore (866-925MHz) Additional changes: Numerous other bug fixes! 3.0 07/15/2019 Oscium is introducing two new spectrum analyzers!! WiPry 340x - Covering frequency ranges 300-348MHz and 387-464MHz WiPry 790x - Covering the following frequency ranges: USA (902-928MHz) China (755-787MHz) Europe (863-868MHz) Japan (916-928MHz) Korea (917-924MHz) Singapore (866-925MHz) Additional changes: Added back CSV data logging found in settings menu. Numerous other bug fixes! 2.38 07/03/2019 Bug fixes and UI enhancements. 2.37 06/11/2019 Added support to detect 802.11ax access points on 2.4 and 5 GHz. Bug fixes for WiPry 2500x. 2.36 05/21/2019 Bug fixes for new WiPry 2500x hardware release. 2.35 05/15/2019 * Added support for WiPry Sub 1 GHz accessories (WiPry 340x and WiPry 790x). * Bug fixes. 2.34 05/06/2019 *Added support for WiPry 2500x. *Replaced data logging with new play back and record. *Fixed bugs. 2.33 04/17/2019 Various bug fixes and UI changes. Added Japanese localization. 2.32 01/03/2019 Bug fixes and UI enhancements! 2.31 12/01/2018 Contains bug fixes and UI enhancements. 2.29 09/23/2018 Fixed various bugs. Added various UI enhancements. 2.27 07/30/2018 Added support for Access Point utilization to 5GHz. 2.26 05/17/2018 Bug Fixes. 2.25 03/19/2018 UI Enhancements and bug fixes. 2.24 03/13/2018 Bug fixes. 2.23 03/05/2018 Minor UI enhancement to Access Point Utilization table. 2.22 02/10/2018 Various bug fixes. 2.21 02/01/2018 Various bug fixes and enhancements. 2.20 01/26/2018 * Change Pickerview UI to be a bit more easy to use. * Changed the demo SSIDs of WiPry5x. * SSIDs are requested immediately after the device is connected and making certain changes. * Fixed bug where setting SSID refresh rate to "Always" sometimes does not request SSID. * Changed the color of the real wave options (Raw, Decay, etc) in the menu to match it's actual color on the display. * Other minor UI changes. * Other bug fixes. 2.17 12/28/2017 * Fixed weird looking scroll bars on some of the menus. * Changed the app to initially request SSID’s instead of spectrum rssi values when WiPry 5x is connected. * Fixed incorrect units for the delta cursor labels. Units were changed from “dBm” instead of “dB” * Fixed other miscellaneous bugs. 2.16 02/01/2017 Fixed accessory communication bug. 2.15 11/23/2016 Fixed bug where RSSI data would sometimes not stream when WiPry 5x is connected. Fixed bug where invalid access points are shown on screen. Fixed bug where the SSID refresh button and 5.4 Ghz button remained enabled when older accessory (which do not support these features) are connected. Changed SSID refresh range from 10s - 60s to 30s - 120s. 2.13 10/09/2016 Bug Fixes 2.12 09/02/2016 Added 5 GHz channel guide. Added Data Logging (Power Mode & Spectrum 2.4GHz and 5 GHz rssi). Added screenshots (screenshots will be saved in the same folder as the data logs instead of the normal iOS Photo). Added "Manage files" button in settings menu to email screenshots and files. Fixed incorrect positioning of 5 GHz SSIDs. 2.11 07/15/2016

---

Previous Versions

Here you can find the changelog of WiPry since it was posted on our website on 2016-09-24 14:07:24. The latest version is 3.1 and it was updated on 2026-06-23 00:19:56. See below the changes in each version.

---

Related Apps

Here you can find apps that are similar with WiPry.

---

Disclaimer