VirtualBench 16.1.0 - App Store

---

About VirtualBench

NI VirtualBench is an all-in-one instrument that works with your iPad. It integrates a mixed-signal oscilloscope, function generator, digital multimeter, and programmable DC power supply into a single device that takes up...

NI VirtualBench is an all-in-one instrument that works with your iPad. It integrates a mixed-signal oscilloscope, function generator, digital multimeter, and programmable DC power supply into a single device that takes up less space on your bench. Connect VirtualBench wirelessly to your iPad to interact with instruments like never before. No knobs or buttons required. SEE All Instruments Together View and interact with all instruments at once with a consolidated and consistent experience for each instrument. INTERACT with Multi-Touch Gestures Pinch horizontally or vertically to change the Time/Div or Volts/Div. Tap and drag to pan or position a waveform. SHARE Screenshots and Data in Seconds Capture screenshots or data in a .CSV file and instantly email, AirDrop, save to the camera roll, or share directly to other apps like Dropbox, Skitch, and Numbers. BUMP to Perform Actions Hands-Free Holding two probes and need an extra hand? Configure Hands-Free and simply bump your iPad to take a screenshot, start an acquisition, or enable another instrument without dropping your probes. GETTING STARTED . To use this app with a VirtualBench device, first connect your iPad to the same WiFi network as the VirtualBench device or to the WiFi network hosted by the VirtualBench device. . This app may also be used in “Demo Mode” with simulated signals. The function generator is “virtually” connected to the oscilloscope and the DC power supply is “virtually” connected to the digital multimeter. For purchasing information on the VirtualBench all-in-one instrument, visit ni.com/virtualbench. Need help? Get support at ni.com/support.

Version History This update from Apple will improve the functionality of this app. No new features are included. + Support for new VirtualBench Hardware New hardware includes a 4 channel, 2 GS/s oscilloscope with 500 MHz Bandwidth + DC Power Supply bug fixes + Improved signal representation 16.1.0 03/28/2017 - XY Mode Plot one channel against another, aiding in IV curve characterization or in plotting Lissajous patterns. - Measurement Indicators View location indicators on the graph to better visualize where a measurement is being taken. 16.0.0 08/20/2016 Pulse Width Trigger Trigger off an analog or digital pulse to quickly find glitches in signals. Additional FFT Windows Perform additional windowing on FFT signals: Flat top, Hamming, Blackman-Harris, Blackman-Harris 4 term, Blackman-Harris 7 term, Blackman-Nuttall, exact Blackman, and low sidelobe. Fan Adjustments Fan algorithm was updated to ensure specification accuracy under a wider range of ambient temperatures. This update is critical as it could potentially affect measurement accuracy. PWS Fixes Bug fixes to improve output accuracy of DC power supply. FGEN Improvements Enabled protection on the function generator from overvoltage conditions outside of specifications. 15.2.2 06/13/2016 Pulse Width Trigger Trigger off an analog or digital pulse to quickly find glitches in signals. Additional FFT Windows Perform additional windowing on FFT signals: Flat top, Hamming, Blackman-Harris, Blackman-Harris 4 term, Blackman-Harris 7 term, Blackman-Nuttall, exact Blackman, and low sidelobe. Bug fixes to the DC power supply. 15.2.1 06/03/2016 Pulse Width Trigger Trigger off an analog or digital pulse to quickly find glitches in signals. Additional FFT Windows Perform additional windowing on FFT signals: Flat top, Hamming, Blackman-Harris, Blackman-Harris 4 term, Blackman-Harris 7 term, Blackman-Nuttall, exact Blackman, and low sidelobe. 15.2 03/14/2016 + New Hardware Support Control new VirtualBench hardware. New hardware includes a 4 channel oscilloscope, 350 MHz oscilloscope bandwidth, and a higher current power supply. 15.1.5 12/28/2015 Monitor Mode Monitor instruments automated in LabVIEW or C in the application. Firmware Updates Update the firmware through the iPad app without the need to connect via USB. 20 MHz Bandwidth Limit Filter Remove unwanted high-frequency noise from your signal. New Language Support for Russian. 1.2.1 09/18/2015 Monitor Mode Monitor instruments automated in LabVIEW or C in the application. Firmware Updates Update the firmware through the iPad app without the need to connect via USB. 20 MHz Bandwidth Limit Filter Remove unwanted high-frequency noise from your signal. New Language Support for Russian. 1.2 07/03/2015 New Languages Support for French, German, Japanese, Korean, and Simplified Chinese Numeric Sweep Control Swipe to scroll through numeric values in addition to using the keyboard input. Oscilloscope Math Functions Perform add, subtract, multiply, and divide operations on two analog oscilloscope channels. Oscilloscope FFT Function View analog oscilloscope channels in the frequency domain. Oscilloscope Averaging Mode Reduce noise in repetitive signals with the averaging acquisition mode. 1.1 01/02/2015 Version 1.0.6: • Added support for Client Mode so you can connect to VirtualBench over existing wireless networks. Version 1.0.5.1: • Fixed a bug that prevented "Additional Help & Resources" from showing. 1.0.6 08/08/2014 Version 1.0.5.1: • Fixed a bug that prevented "Additional Help & Resources" from showing. 1.0.5.1 07/25/2014 1.0.5 07/18/2014

---

Previous Versions

Here you can find the changelog of VirtualBench since it was posted on our website on 2023-07-03 12:09:37. The latest version is 16.1.0 and it was updated on 2026-06-22 10:01:25. See below the changes in each version.

---

Related Apps

Here you can find apps that are similar with VirtualBench.

---

Disclaimer