About VictronConnect
VictronConnect lets you get live status info and configure Victron products with built-in bluetooth support or using a VE.Direct Bluetooth LE dongle. LIVE DATA: Get instant data from your solar charger or battery monitor....
VictronConnect lets you get live status info and configure Victron products with built-in bluetooth support or using a VE.Direct Bluetooth LE dongle. LIVE DATA: Get instant data from your solar charger or battery monitor. READ HISTORY RECORDS*: Makes it easy to diagnose your installation. With BlueSolar MPPT chargers you’ll get thirty days history records at one glance. CONFIGURE SETTINGS: Most exciting feature! Configure your device with just a few taps on your phone screen. Simplifies all, navigate through the configuration pages, edit settings and changes will be sent instantly to your device. UPDATE FIRMWARE: Be always up to date. VictronConnect includes the latest firmware versions, when outdated firmware is detected you'll be prompted to update. It is also possible to update firmware manually. DEMO MODE: Select a product from the built-in demo library and discover all the features. This app requires Bluetooth Low Energy, which is supported on the iPhone 4S and up, iPad Air and iPad Mini (3rd and 4th generation). Supported Victron products: * BMV 70x Battery Monitors * BlueSolar & SmartSolar MPPT Chargers** * VE.Direct Phoenix Inverters * Blue Smart IP22 Chargers * Blue Smart IP65 Chargers * Blue Smart IP67 Chargers * Peak Power Pack * MultiPlus and Quattro with VE.Bus Bluetooth Smart Dongle ---- * Only on products with history support ** BlueSolar 70/15 excluded
Version History - MPPT Solar Chargers: Added PV short relay protection information to "Why is the charger off?" 6.34 2d ago - Make it possible to inspect a settings file created with a different product firmware version. GX: - Improve VRM content loading Sun Inverter: - Fix output voltage setting 6.33 May 27 - Fix trends can freeze at "fetching" state in certain situations 6.32 Mar 31 - Fix trends showing incorrect dates in certain conditions - Fix live trends when connected via a VE.Direct Smart Dongle - Improvements to firmware library synchronization - Fix "Remove" option not always shown for user-added firmware BMV-712: - Fix some display settings not being exported to settings files MultiRS: - Export discharge current limit to settings files - Add error 77: Settings sync disabled SolarSense: - Fix incorrect kWh scale on the history page 6.31 Mar 23 New • Integrated VRM dashboard and in-app Remote Console • Smarter firmware updates: Always get the latest firmware, now with release notes. • Enhanced trends view • Batch Programming: update & configure multiple products at once Improvements • Various fixes and improvements 6.30 Feb 23 - Orion XS 1400: Add firmware v1.13 - SolarSense: Small fixes and improvements - Fix issues with the remote products discovery - Fix BMW-600S not being shown through MQTT Connections 6.24 11/26/2025 - Fix numeric input values are not correctly validated on certain locales EVCS: - Add firmware v2.05 Energy Meter: - Add firmware v1.11 Lynx Shunt: - Improve calibration routine Multi RS: - Fix settings saved with v6.19 or earlier could fail to load VE.Bus Inverter/Chargers: - Add new MultiPlus-II models 6.23 10/20/2025 - Fix connection issues with GX products when using certain firmware versions and connection method combinations - Multi RS: Allow battery presets to set equalisation voltage to 0V. - Fix VE.Bus smart dongle AC output instant readout 6.22 09/23/2025 VE.Bus Smart Dongle: - Fix settings button is not visible EVCS: - Add firmware v2.04 6.21 09/19/2025 - Stability, performance, and UI improvements - Added support for MultiPlus and Quattro on VRM and local network connections (monitoring only). - Added button for direct Remote Console access via VRM. - MultiRS firmware v1.26: adds Austria grid code support and features such as self-consumption from battery, system sync settings, and switch phases as group. - VM-3P75CT firmware v1.10: adds features such as power factor live data, phase sequence live data, phase rotation alarm, and EV charger and heat pump roles. - Smart Charger firmware v3.65: adds a button lock feature for all models with a button. - MPPT firmware v1.68 - EVCS firmware v2.04 6.20 09/17/2025 - Add Multi RS firmware v1.25 - Small fixes 6.19 07/18/2025 Orion Smart: - Add firmware v1.16 OrionXS: - Add firmware v1.12 - Add "BMS Present" reset button Multi RS: - Add firmware v1.24 SmartShunt & BMV-712: - Add firmware v4.19 Phoenix & SUN inverter: - Add firmware v1.37 SmartSolar: - Add Bluetooth firmware v2.53 MPPT Solar Chargers: - Add firmware v1.67 for some models 6.18 06/09/2025 OrionXS 1400: - Add firmware v1.11: - Internal improvements - Fix Orion XS Smart Alternator(24V) preset 6.17 04/29/2025 - Add Multi RS firmware v1.23 - Add Inverter RS firmware v1.22 - Add MPPT RS firmware v1.22 - Smart Charger IP43: Fix some settings are not available on remote connections - Orion XS: - Fix some settings are not available on remote connections - Fix generator shut-down detection can show wrong selected preset 6.16 04/15/2025 - Fix Trends page not remembering last selected trends in some cases. - Fixed random crashes when a VM-3P75CT is available on the local network - Add Vietnamese translation MPPT RS: - Fixed an issue where the 'Charger enabled' toggle did not reflect the correct status in certain situations. - Add a setting to allow hiding unused MPPT trackers MultiRS: - Do not require password when setting a grid code for a first time. - Various improvements to the NS Log list - Add a setting to allow hiding unused MPPT trackers - Include grid code settings when exporting & inporting settings files= - Include grid code settings in demo products - Show ESS settings in demo product Lynx SmartBMS NG: - Add firmware v1.13 - Disable or hide settings that do not apply to the NG version. Smart BatteryProtect: - Add firmware v2.12 Smart Battery Sense: - Add firmware v1.15 Lynx Shunt VE.Can : - Add battery voltage calibration VM-3P75CT: - Trigger reconnection when changing roles over a remote connection. 6.15 04/02/2025 - Reword NMEA2000 Device Instance setting to VE.Can Device Instance. - Update translations - Add Czech language Lynx SmartBMS NG: - Add demo product for 500A & 1000A models - Add NG batteries balancer firmware update status VE.Bus Smart dongle: - Make the firmware v1.20 update optional rather than mandatory. This version is included in VictronConnect v6.14. 6.14 01/27/2025 Add VE.Bus Smart Dongle firmware v1.20 6.13 01/14/2025 Multi RS: - Add firmware v1.20 - Fix firmware updating via local network GX Orion XS: - Add firmware v1.06 EVCS: - Improvements to the firmware updating process SmartLithium: - Minor fixes for Instant Readout cell voltage values 6.12 12/11/2024 - Fix an issue where certain grid settings are protected under the grid code password when they shouldn't be. - EVCS: Improvements to the firmware updating process 6.11 11/27/2024 - Various fixes and improvements - Add firmware v2.52 for VE.Direct Smart Dongles - Add firmware v1.14 for Smart Battery Sense - Add firmware v1.19 for VE.Bus Smart Dongle Multi RS: - Add grid codes: Europe, Belgium and Poland. - Add sustain voltage settings - Make possible to disable repeated absorption - Add PV Inverter ESS mode GX products: - Make possible to connect to attached products via LAN EVCS: - Add firmware updating support Energy Meter: - Add firmware v1.08 - Support new features included in firmware v1.08 6.10 11/21/2024 Fix Bluetooth update issue for certain Phoenix Inverter model/batch combinations 6.09.1 09/24/2024 - Add OrionXS firmware v1.05 - Add MPPT firmware v3.16 6.09 09/10/2024 - Add Orion XS fw v1.04 - Add Lynx Smart BMS firmware v1.11 - Add Phoenix Inverter firmware v1.36 - Add Sun Inverter firmware v1.36 - Make Solar Charger fw v1.64 mandatory for some models - Various improvements and fixes 6.08 08/07/2024 Lynx Smart BMS 1000 NG: - Show battery information 6.07 06/08/2024 * Improve remote firmware updates MPPT Solar Chargers: * Add firmware v1.64 * Make firmware v3.15 update mandatory for SmartSolar 250/100 rev2 Energy Meter: * Add firmware v1.06 Lynx SmartBMS NG: * Fix battery tab show a white empty page on tablets in portrait mode. * Hide batteries cells details on remote connections, this data is not yet available via VRM. Phoenix & SUN Inverter: * Add settings lock exceptions 6.06 06/06/2024
Previous Versions
Here you can find the changelog of VictronConnect since it was posted on our website on 2021-12-23 04:37:01.
The latest version is 6.34 and it was updated on 2026-06-11 13:23:33. See below the changes in each version.
VictronConnect version 6.34
Updated At: 2026-06-11
Changes: Version History - MPPT Solar Chargers: Added PV short relay protection information to "Why is the charger off?" 6.34 2d ago - Make it possible to inspect a settings file created with a different product firmware version.
GX:
- Improve VRM content loading
Sun Inverter:
- Fix output voltage setting 6.33 May 27 - Fix trends can freeze at "fetching" state in certain situations 6.32 Mar 31 - Fix trends showing incorrect dates in certain conditions
- Fix live trends when connected via a VE.Direct Smart Dongle
- Improvements to firmware library synchronization
- Fix "Remove" option not always shown for user-added firmware
BMV-712:
- Fix some display settings not being exported to settings files
MultiRS:
- Export discharge current limit to settings files
- Add error 77: Settings sync disabled
SolarSense:
- Fix incorrect kWh scale on the history page 6.31 Mar 23 New
• Integrated VRM dashboard and in-app Remote Console
• Smarter firmware updates: Always get the latest firmware, now with release notes.
• Enhanced trends view
• Batch Programming: update & configure multiple products at once
Improvements
• Various fixes and improvements 6.30 Feb 23 - Orion XS 1400: Add firmware v1.13
- SolarSense: Small fixes and improvements
- Fix issues with the remote products discovery
- Fix BMW-600S not being shown through MQTT Connections 6.24 11/26/2025 - Fix numeric input values are not correctly validated on certain locales
EVCS:
- Add firmware v2.05
Energy Meter:
- Add firmware v1.11
Lynx Shunt:
- Improve calibration routine
Multi RS:
- Fix settings saved with v6.19 or earlier could fail to load
VE.Bus Inverter/Chargers:
- Add new MultiPlus-II models 6.23 10/20/2025 - Fix connection issues with GX products when using certain firmware versions and connection method combinations
- Multi RS: Allow battery presets to set equalisation voltage to 0V.
- Fix VE.Bus smart dongle AC output instant readout 6.22 09/23/2025 VE.Bus Smart Dongle:
- Fix settings button is not visible
EVCS:
- Add firmware v2.04 6.21 09/19/2025 - Stability, performance, and UI improvements
- Added support for MultiPlus and Quattro on VRM and local network connections (monitoring only).
- Added button for direct Remote Console access via VRM.
- MultiRS firmware v1.26: adds Austria grid code support and features such as self-consumption from battery, system sync settings, and switch phases as group.
- VM-3P75CT firmware v1.10: adds features such as power factor live data, phase sequence live data, phase rotation alarm, and EV charger and heat pump roles.
- Smart Charger firmware v3.65: adds a button lock feature for all models with a button.
- MPPT firmware v1.68
- EVCS firmware v2.04 6.20 09/17/2025 - Add Multi RS firmware v1.25
- Small fixes 6.19 07/18/2025 Orion Smart:
- Add firmware v1.16
OrionXS:
- Add firmware v1.12
- Add "BMS Present" reset button
Multi RS:
- Add firmware v1.24
SmartShunt & BMV-712:
- Add firmware v4.19
Phoenix & SUN inverter:
- Add firmware v1.37
SmartSolar:
- Add Bluetooth firmware v2.53
MPPT Solar Chargers:
- Add firmware v1.67 for some models 6.18 06/09/2025 OrionXS 1400:
- Add firmware v1.11:
- Internal improvements
- Fix Orion XS Smart Alternator(24V) preset 6.17 04/29/2025 - Add Multi RS firmware v1.23
- Add Inverter RS firmware v1.22
- Add MPPT RS firmware v1.22
- Smart Charger IP43: Fix some settings are not available on remote connections
- Orion XS:
- Fix some settings are not available on remote connections
- Fix generator shut-down detection can show wrong selected preset 6.16 04/15/2025 - Fix Trends page not remembering last selected trends in some cases.
- Fixed random crashes when a VM-3P75CT is available on the local network
- Add Vietnamese translation
MPPT RS:
- Fixed an issue where the 'Charger enabled' toggle did not reflect the correct status in certain situations.
- Add a setting to allow hiding unused MPPT trackers
MultiRS:
- Do not require password when setting a grid code for a first time.
- Various improvements to the NS Log list
- Add a setting to allow hiding unused MPPT trackers
- Include grid code settings when exporting & inporting settings files=
- Include grid code settings in demo products
- Show ESS settings in demo product
Lynx SmartBMS NG:
- Add firmware v1.13
- Disable or hide settings that do not apply to the NG version.
Smart BatteryProtect:
- Add firmware v2.12
Smart Battery Sense:
- Add firmware v1.15
Lynx Shunt VE.Can :
- Add battery voltage calibration
VM-3P75CT:
- Trigger reconnection when changing roles over a remote connection. 6.15 04/02/2025 - Reword NMEA2000 Device Instance setting to VE.Can Device Instance.
- Update translations
- Add Czech language
Lynx SmartBMS NG:
- Add demo product for 500A & 1000A models
- Add NG batteries balancer firmware update status
VE.Bus Smart dongle:
- Make the firmware v1.20 update optional rather than mandatory. This version is included in VictronConnect v6.14. 6.14 01/27/2025 Add VE.Bus Smart Dongle firmware v1.20 6.13 01/14/2025 Multi RS:
- Add firmware v1.20
- Fix firmware updating via local network GX
Orion XS:
- Add firmware v1.06
EVCS:
- Improvements to the firmware updating process
SmartLithium:
- Minor fixes for Instant Readout cell voltage values 6.12 12/11/2024 - Fix an issue where certain grid settings are protected under the grid code password when they shouldn't be.
- EVCS: Improvements to the firmware updating process 6.11 11/27/2024 - Various fixes and improvements
- Add firmware v2.52 for VE.Direct Smart Dongles
- Add firmware v1.14 for Smart Battery Sense
- Add firmware v1.19 for VE.Bus Smart Dongle
Multi RS:
- Add grid codes: Europe, Belgium and Poland.
- Add sustain voltage settings
- Make possible to disable repeated absorption
- Add PV Inverter ESS mode
GX products:
- Make possible to connect to attached products via LAN
EVCS:
- Add firmware updating support
Energy Meter:
- Add firmware v1.08
- Support new features included in firmware v1.08 6.10 11/21/2024 Fix Bluetooth update issue for certain Phoenix Inverter model/batch combinations 6.09.1 09/24/2024 - Add OrionXS firmware v1.05
- Add MPPT firmware v3.16 6.09 09/10/2024 - Add Orion XS fw v1.04
- Add Lynx Smart BMS firmware v1.11
- Add Phoenix Inverter firmware v1.36
- Add Sun Inverter firmware v1.36
- Make Solar Charger fw v1.64 mandatory for some models
- Various improvements and fixes 6.08 08/07/2024 Lynx Smart BMS 1000 NG:
- Show battery information 6.07 06/08/2024 * Improve remote firmware updates
MPPT Solar Chargers:
* Add firmware v1.64
* Make firmware v3.15 update mandatory for SmartSolar 250/100 rev2
Energy Meter:
* Add firmware v1.06
Lynx SmartBMS NG:
* Fix battery tab show a white empty page on tablets in portrait mode.
* Hide batteries cells details on remote connections, this data is not yet available via VRM.
Phoenix & SUN Inverter:
* Add settings lock exceptions 6.06 06/06/2024
VictronConnect version 6.32
Updated At: 2026-05-09
Changes: Version History - Fix trends can freeze at "fetching" state in certain situations 6.32 Mar 31 - Fix trends showing incorrect dates in certain conditions
- Fix live trends when connected via a VE.Direct Smart Dongle
- Improvements to firmware library synchronization
- Fix "Remove" option not always shown for user-added firmware
BMV-712:
- Fix some display settings not being exported to settings files
MultiRS:
- Export discharge current limit to settings files
- Add error 77: Settings sync disabled
SolarSense:
- Fix incorrect kWh scale on the history page 6.31 Mar 23 New
• Integrated VRM dashboard and in-app Remote Console
• Smarter firmware updates: Always get the latest firmware, now with release notes.
• Enhanced trends view
• Batch Programming: update & configure multiple products at once
Improvements
• Various fixes and improvements 6.30 Feb 23 - Orion XS 1400: Add firmware v1.13
- SolarSense: Small fixes and improvements
- Fix issues with the remote products discovery
- Fix BMW-600S not being shown through MQTT Connections 6.24 11/26/2025 - Fix numeric input values are not correctly validated on certain locales
EVCS:
- Add firmware v2.05
Energy Meter:
- Add firmware v1.11
Lynx Shunt:
- Improve calibration routine
Multi RS:
- Fix settings saved with v6.19 or earlier could fail to load
VE.Bus Inverter/Chargers:
- Add new MultiPlus-II models 6.23 10/20/2025 - Fix connection issues with GX products when using certain firmware versions and connection method combinations
- Multi RS: Allow battery presets to set equalisation voltage to 0V.
- Fix VE.Bus smart dongle AC output instant readout 6.22 09/23/2025 VE.Bus Smart Dongle:
- Fix settings button is not visible
EVCS:
- Add firmware v2.04 6.21 09/19/2025 - Stability, performance, and UI improvements
- Added support for MultiPlus and Quattro on VRM and local network connections (monitoring only).
- Added button for direct Remote Console access via VRM.
- MultiRS firmware v1.26: adds Austria grid code support and features such as self-consumption from battery, system sync settings, and switch phases as group.
- VM-3P75CT firmware v1.10: adds features such as power factor live data, phase sequence live data, phase rotation alarm, and EV charger and heat pump roles.
- Smart Charger firmware v3.65: adds a button lock feature for all models with a button.
- MPPT firmware v1.68
- EVCS firmware v2.04 6.20 09/17/2025 - Add Multi RS firmware v1.25
- Small fixes 6.19 07/18/2025 Orion Smart:
- Add firmware v1.16
OrionXS:
- Add firmware v1.12
- Add "BMS Present" reset button
Multi RS:
- Add firmware v1.24
SmartShunt & BMV-712:
- Add firmware v4.19
Phoenix & SUN inverter:
- Add firmware v1.37
SmartSolar:
- Add Bluetooth firmware v2.53
MPPT Solar Chargers:
- Add firmware v1.67 for some models 6.18 06/09/2025 OrionXS 1400:
- Add firmware v1.11:
- Internal improvements
- Fix Orion XS Smart Alternator(24V) preset 6.17 04/29/2025 - Add Multi RS firmware v1.23
- Add Inverter RS firmware v1.22
- Add MPPT RS firmware v1.22
- Smart Charger IP43: Fix some settings are not available on remote connections
- Orion XS:
- Fix some settings are not available on remote connections
- Fix generator shut-down detection can show wrong selected preset 6.16 04/15/2025 - Fix Trends page not remembering last selected trends in some cases.
- Fixed random crashes when a VM-3P75CT is available on the local network
- Add Vietnamese translation
MPPT RS:
- Fixed an issue where the 'Charger enabled' toggle did not reflect the correct status in certain situations.
- Add a setting to allow hiding unused MPPT trackers
MultiRS:
- Do not require password when setting a grid code for a first time.
- Various improvements to the NS Log list
- Add a setting to allow hiding unused MPPT trackers
- Include grid code settings when exporting & inporting settings files=
- Include grid code settings in demo products
- Show ESS settings in demo product
Lynx SmartBMS NG:
- Add firmware v1.13
- Disable or hide settings that do not apply to the NG version.
Smart BatteryProtect:
- Add firmware v2.12
Smart Battery Sense:
- Add firmware v1.15
Lynx Shunt VE.Can :
- Add battery voltage calibration
VM-3P75CT:
- Trigger reconnection when changing roles over a remote connection. 6.15 04/02/2025 - Reword NMEA2000 Device Instance setting to VE.Can Device Instance.
- Update translations
- Add Czech language
Lynx SmartBMS NG:
- Add demo product for 500A & 1000A models
- Add NG batteries balancer firmware update status
VE.Bus Smart dongle:
- Make the firmware v1.20 update optional rather than mandatory. This version is included in VictronConnect v6.14. 6.14 01/27/2025 Add VE.Bus Smart Dongle firmware v1.20 6.13 01/14/2025 Multi RS:
- Add firmware v1.20
- Fix firmware updating via local network GX
Orion XS:
- Add firmware v1.06
EVCS:
- Improvements to the firmware updating process
SmartLithium:
- Minor fixes for Instant Readout cell voltage values 6.12 12/11/2024 - Fix an issue where certain grid settings are protected under the grid code password when they shouldn't be.
- EVCS: Improvements to the firmware updating process 6.11 11/27/2024 - Various fixes and improvements
- Add firmware v2.52 for VE.Direct Smart Dongles
- Add firmware v1.14 for Smart Battery Sense
- Add firmware v1.19 for VE.Bus Smart Dongle
Multi RS:
- Add grid codes: Europe, Belgium and Poland.
- Add sustain voltage settings
- Make possible to disable repeated absorption
- Add PV Inverter ESS mode
GX products:
- Make possible to connect to attached products via LAN
EVCS:
- Add firmware updating support
Energy Meter:
- Add firmware v1.08
- Support new features included in firmware v1.08 6.10 11/21/2024 Fix Bluetooth update issue for certain Phoenix Inverter model/batch combinations 6.09.1 09/24/2024 - Add OrionXS firmware v1.05
- Add MPPT firmware v3.16 6.09 09/10/2024 - Add Orion XS fw v1.04
- Add Lynx Smart BMS firmware v1.11
- Add Phoenix Inverter firmware v1.36
- Add Sun Inverter firmware v1.36
- Make Solar Charger fw v1.64 mandatory for some models
- Various improvements and fixes 6.08 08/07/2024 Lynx Smart BMS 1000 NG:
- Show battery information 6.07 06/08/2024 * Improve remote firmware updates
MPPT Solar Chargers:
* Add firmware v1.64
* Make firmware v3.15 update mandatory for SmartSolar 250/100 rev2
Energy Meter:
* Add firmware v1.06
Lynx SmartBMS NG:
* Fix battery tab show a white empty page on tablets in portrait mode.
* Hide batteries cells details on remote connections, this data is not yet available via VRM.
Phoenix & SUN Inverter:
* Add settings lock exceptions 6.06 06/06/2024 Fix settings export/import buttons not showing on certain MPPT models
Fix product id doesn't show for local products in product info page 6.05 04/25/2024 * Fix some values are partially drawn off screen
* Fix the app will display a shaded overlay when it disconnects from a product while a dialog box is open.
* Return to the devices list instead of the installations list after a remote firmware update
* Fix an issue where a product may be mistakenly added to the "My Products" list after an unsuccessful connection attempt.
GX products:
* Fix firmware version is not shown when connected via local network 6.04 04/15/2024
VictronConnect version 6.30
Updated At: 2026-02-23
Changes: New
• Integrated VRM dashboard and in-app Remote Console
• Smarter firmware updates: Always get the latest firmware, now with release notes.
• Enhanced trends view
• Batch Programming: update & configure multiple products at once
Improvements
• Various fixes and improvements
VictronConnect version 6.24
Updated At: 2025-11-26
Changes: - Orion XS 1400: Add firmware v1.13
- SolarSense: Small fixes and improvements
- Fix issues with the remote products discovery
- Fix BMW-600S not being shown through MQTT Connections
VictronConnect version 6.22
Updated At: 2025-09-23
Changes: Sep 23, 2025
Version 6.22
- Fix connection issues with GX products when using certain firmware versions and connection method combinations
- Multi RS: Allow battery presets to set equalisation voltage to 0V.
- Fix VE.Bus smart dongle AC output instant readout
VictronConnect version 6.18
Updated At: 2025-06-09
Changes: Jun 9, 2025
Version 6.18
Orion Smart:
- Add firmware v1.16
OrionXS:
- Add firmware v1.12
- Add "BMS Present" reset button
Multi RS:
- Add firmware v1.24
SmartShunt & BMV-712:
- Add firmware v4.19
Phoenix & SUN inverter:
- Add firmware v1.37
SmartSolar:
- Add Bluetooth firmware v2.53
MPPT Solar Chargers:
- Add firmware v1.67 for some models
VictronConnect version 6.17
Updated At: 2025-04-29
Changes: Apr 29, 2025
Version 6.17
OrionXS 1400:
- Add firmware v1.11:
- Internal improvements
- Fix Orion XS Smart Alternator(24V) preset
VictronConnect version 6.16
Updated At: 2025-04-15
Changes: Apr 15, 2025
Version 6.16
- Add Multi RS firmware v1.23
- Add Inverter RS firmware v1.22
- Add MPPT RS firmware v1.22
- Smart Charger IP43: Fix some settings are not available on remote connections
- Orion XS:
- Fix some settings are not available on remote connections
- Fix generator shut-down detection can show wrong selected preset
VictronConnect version 6.15
Updated At: 2025-04-02
Changes: Apr 2, 2025
Version 6.15
- Fix Trends page not remembering last selected trends in some cases.
- Fixed random crashes when a VM-3P75CT is available on the local network
- Add Vietnamese translation
MPPT RS:
- Fixed an issue where the 'Charger enabled' toggle did not reflect the correct status in certain situations.
- Add a setting to allow hiding unused MPPT trackers
MultiRS:
- Do not require password when setting a grid code for a first time.
- Various improvements to the NS Log list
- Add a setting to allow hiding unused MPPT trackers
- Include grid code settings when exporting & inporting settings files=
- Include grid code settings in demo products
- Show ESS settings in demo product
Lynx SmartBMS NG:
- Add firmware v1.13
- Disable or hide settings that do not apply to the NG version.
Smart BatteryProtect:
- Add firmware v2.12
Smart Battery Sense:
- Add firmware v1.15
Lynx Shunt VE.Can :
- Add battery voltage calibration
VM-3P75CT:
- Trigger reconnection when changing roles over a remote connection.
VictronConnect version 6.14
Updated At: 2025-01-27
Changes: Jan 27, 2025
Version 6.14
- Reword NMEA2000 Device Instance setting to VE.Can Device Instance.
- Update translations
- Add Czech language
Lynx SmartBMS NG:
- Add demo product for 500A & 1000A models
- Add NG batteries balancer firmware update status
VE.Bus Smart dongle:
- Make the firmware v1.20 update optional rather than mandatory. This version is included in VictronConnect v6.14.
Disclaimer
Official App Store Link
We do not host VictronConnect on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for VictronConnect is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
