About VersaTech Recloser Programmer
The Hubbell Power Systems 'VersaTech(R) Recloser Programmer' for iPad and iPhone apps allow communication with Versa-Tech(R) I (VT-I), Versa-Tech(R) LT (VTLT), Versa-Tech(R) II (VT-II) or Versa-Tech(R) XC (VT-XC)...
The Hubbell Power Systems 'VersaTech(R) Recloser Programmer' for iPad and iPhone apps allow communication with Versa-Tech(R) I (VT-I), Versa-Tech(R) LT (VTLT), Versa-Tech(R) II (VT-II) or Versa-Tech(R) XC (VT-XC) Reclosers equipped with WiFi modules. With the iPad version, users can read and program settings, download Event and Data Logs and perform other functions, as they would when using a laptop computer and a remote radio. The iPhone version has restricted capabilities such as viewing, generating reports, and limited command functions. Specifically, using the iPad 'VersaTech Recloser Programmer' customers can: - Flash Beacon functionality to identity recloser in the field. - Read and Program Versa-Tech Recloser settings. - Monitor Real-Time Current Data on the Versa-Tech Recloser. - View Data Log and View Demand Graph. - Download Versa-Tech Event Log. - View, Download and Edit Versa-Tech Scratchpad. - Download and Save PDF format reports on the iPad that could be shared via email. - Change the Wi-Fi SSID and password from the app. - For the Versa-Tech II and XC, customers can also . View Device and Audit Logs . View Oscillogram for overcurrent events . Export Demand log, Event log, Device log and Oscillogram data/graph as a report and view them instantly or offline . Set the Recloser in Hot Line Tag/Non-Reclose from the app . Trip, Close or Lockout the Recloser from the app . Create multiple users and permission levels
Version History Added extra validation on the "Write Settings" button for proper configuration of Non Reclose Handle mode. 4.1 02/15/2025 - Corrects demand log issue where values are not displayed in GUI or on generated reports past 2 byte entry value (255). - Supports communication for the following Versa-Tech type and firmware versions. * Versa-Tech LT – all firmware versions * Versa-Tech I – all firmware 3.xx and 4.xx versions * Versa-Tech II and Versa-Tech XC firmware version 1.08.8 and higher - Provides new feature functionality for firmware version 1.14.7 on Versa-Tech II and Versa-Tech XC - Compatible with iOS12 through iOS14 4.0 09/02/2021 Features: -Adds support for iOS 14.0.1 and higher. Fixes: -Corrects networking, graphics, and other issues when using prior App versions with iOS14 and higher. Restrictions/Known Issues: -App crashes when communicating with Versa-Tech II reclosers running version 1.06 firmware and lower. -Recloser must be upgraded to firmware version 1.08.8 or higher via PC. -App will crash/not allow user session with recloser -Location services/permissions must be enabled to communicate with local (recloser) network per iOS14 requirements. 3.9 10/23/2020 -Compatible with iOS v12.4.8 and iOS 13.5.1 and higher. -Fixes app crashing when modifying WiFi settings with channels received outside acceptable range. 3.8 08/17/2020 Features: -Adds support for iOS 13.5 and prior versions. -Updates TCC curve naming for each operation in generated report. Fixes: -Corrects issues accessing and modifying Time & Security settings. -Corrects issues initializing connection to app. 3.7 06/01/2020 Release version 3.6 is compatible with all Versa-tech XC, Versa-Tech II, Versa-Tech I and Versa-Tech LT firmware versions to date. The following corrections are made with this release: - Corrected issue where user cannot reinitiate the upgrade process on iPad App when Versa-Tech II or Versa-Tech XC goes into bootloader mode. - Corrected issue where bootloader mode popup displays repeatedly on iPhone App when device is in bootloader mode. - Corrected issue with demand log interval setting not updating when user loads settings profiles. - Corrected issue of accepting duplicate or blank report/log names. 3.6 12/26/2019 Release version 3.5 is compatible with Versa-tech XC and Versa-Tech II firmware versions 1.13.1 and prior and all Versa-Tech I and Versa-Tech LT firmware versions. Release version 3.5 includes the following features and updates: -Added support for iOS13 platform. -Added ‘Retry Attempt Lock’ setting in Versa-Tech XC & Versa-Tech II reclosers. -Added popup windows to support ‘Retry Attempt Lock’ feature. 3.5 12/05/2019 Release version 3.4 is compatible with all Versa-Tech Recloser XC firmware versions 1.0.8 and all Versa-Tech I and Versa-Tech LT firmware versions. Release v3.4 includes the below features and fixes. - Added upgrade capability for Versa-Tech II and Versa-Tech XC. - Added consolidation of advanced and basic settings menu for settings verification when writing/saving a profile on Versa-Tech II and Versa-Tech XC. - Corrected Wi-Fi settings menu/tab issue for all Versa-Tech Reclosers. 3.4 11/07/2019 · Added capability to communicate with Versa-Tech® XC (VT-XC). · Added option to import custom TCC points (256 data values) into ‘Custom TCC Editor” for VTII and VT-XC. · Added two new user levels, “Basic Plus’ and ‘Intermediate’ for VTII and VT-XC. · Added numerical battery voltage to Recloser Status for VTII and VT-XC. · Added Peripheral Power option for powering ON or OFF for VTII and VT-XC. · Added entries to the VTII and VT-XC generated report for user interface platform and iOS version. · Added hardware revision fields for VTII and VT-XC. · Updated TCC curve names for VTII and VT-XC to correctly match associated curve timings. · Included 26 new timezones for selection in the time synchronization window for VTII and VT-XC. · Updated WiFi password field for VTII and VT-XC to accept only ASCII characters. · Added compatibility of VTII and VT-XC Settings file between iOS VT Programmer and Windows VTII / VT-XC Programmer. · Added additional NR handle functions and dual modes for VTI FW v4.50 only. · Added interlock to ensure SC Lockout cannot be selected unless last programmed shot is marked as SC. · Disabled firmware upgrade capability. · Bug fixes 3.3 05/25/2018 Corrected issue on iPhone App with recognition of Versa-Tech® LT WiFi network. 3.2 01/25/2017 •App available on iPhone NOTE: iPhone app has restricted capabilities. •Added capability to communicate with Versa-Tech® I (VTI) Recloser with FW v3.xx. NOTE: Firmware Upgrade for Versa-Tech® I is available only for FW v4.xx. •Added capability to communicate with Versa-Tech® LT Recloser (FW v5.xx). •Added ability to download Oscillogram graph as a report and view them instantly or offline on the iPAD. •Added restrictions on Minimum trip values, TCC curves and Reclose time built into the application. •Bug fixes 3.1 03/31/2016 Single App that can communicate with Versa-Tech® I (VT-I) Recloser with FW v4.xx and above, equipped with Wi-Fi module (or) Versa-Tech® II (VT-II) Recloser equipped with Wi-Fi module. •For the Versa-Tech® I Recloser, the ability to change the Wi-Fi SSID and password from the app was added. •For the Versa-Tech® II Recloser, customers have all capabilities of v2.1 and more - View Device and Audit Logs - View Oscillogram for overcurrent events - Export Demand log, Event log, Device log and Oscillogram data - Set the Recloser in Hot Line Tag/Non Reclose from the app. - Trip, Close or Lockout the Recloser from the app. - Create multiple users and permission levels. •The ability to download PDF reports and view them instantly or offline on the iPAD. The reports can also be shared via email. •Bug fixes 3.0 01/21/2015 2.1 01/21/2014
Previous Versions
Here you can find the changelog of VersaTech Recloser Programmer since it was posted on our website on 2016-10-02 08:09:48.
The latest version is 4.1 and it was updated on 2026-06-08 00:48:51. See below the changes in each version.
VersaTech Recloser Programmer version 4.1
Updated At: 2026-06-08
Changes: Version History Added extra validation on the "Write Settings" button for proper configuration of Non Reclose Handle mode. 4.1 02/15/2025 - Corrects demand log issue where values are not displayed in GUI or on generated reports past 2 byte entry value (255).
- Supports communication for the following Versa-Tech type and firmware versions.
* Versa-Tech LT – all firmware versions
* Versa-Tech I – all firmware 3.xx and 4.xx versions
* Versa-Tech II and Versa-Tech XC firmware version 1.08.8 and higher
- Provides new feature functionality for firmware version 1.14.7 on Versa-Tech II and Versa-Tech XC
- Compatible with iOS12 through iOS14 4.0 09/02/2021 Features:
-Adds support for iOS 14.0.1 and higher.
Fixes:
-Corrects networking, graphics, and other issues when using prior App versions with iOS14 and higher.
Restrictions/Known Issues:
-App crashes when communicating with Versa-Tech II reclosers running version 1.06 firmware and lower.
-Recloser must be upgraded to firmware version 1.08.8 or higher via PC.
-App will crash/not allow user session with recloser
-Location services/permissions must be enabled to communicate with local (recloser) network per iOS14 requirements. 3.9 10/23/2020 -Compatible with iOS v12.4.8 and iOS 13.5.1 and higher.
-Fixes app crashing when modifying WiFi settings with channels received outside acceptable range. 3.8 08/17/2020 Features:
-Adds support for iOS 13.5 and prior versions.
-Updates TCC curve naming for each operation in generated report.
Fixes:
-Corrects issues accessing and modifying Time & Security settings.
-Corrects issues initializing connection to app. 3.7 06/01/2020 Release version 3.6 is compatible with all Versa-tech XC, Versa-Tech II, Versa-Tech I and Versa-Tech LT firmware versions to date. The following corrections are made with this release:
- Corrected issue where user cannot reinitiate the upgrade process on iPad App when Versa-Tech II or Versa-Tech XC goes into bootloader mode.
- Corrected issue where bootloader mode popup displays repeatedly on iPhone App when device is in bootloader mode.
- Corrected issue with demand log interval setting not updating when user loads settings profiles.
- Corrected issue of accepting duplicate or blank report/log names. 3.6 12/26/2019 Release version 3.5 is compatible with Versa-tech XC and Versa-Tech II firmware versions 1.13.1 and prior and all Versa-Tech I and Versa-Tech LT firmware versions.
Release version 3.5 includes the following features and updates:
-Added support for iOS13 platform.
-Added ‘Retry Attempt Lock’ setting in Versa-Tech XC & Versa-Tech II reclosers.
-Added popup windows to support ‘Retry Attempt Lock’ feature. 3.5 12/05/2019 Release version 3.4 is compatible with all Versa-Tech Recloser XC firmware versions 1.0.8 and all Versa-Tech I and Versa-Tech LT firmware versions.
Release v3.4 includes the below features and fixes.
- Added upgrade capability for Versa-Tech II and Versa-Tech XC.
- Added consolidation of advanced and basic settings menu for settings verification when writing/saving a profile on Versa-Tech II and Versa-Tech XC.
- Corrected Wi-Fi settings menu/tab issue for all Versa-Tech Reclosers. 3.4 11/07/2019 · Added capability to communicate with Versa-Tech® XC (VT-XC).
· Added option to import custom TCC points (256 data values) into ‘Custom TCC Editor” for VTII and VT-XC.
· Added two new user levels, “Basic Plus’ and ‘Intermediate’ for VTII and VT-XC.
· Added numerical battery voltage to Recloser Status for VTII and VT-XC.
· Added Peripheral Power option for powering ON or OFF for VTII and VT-XC.
· Added entries to the VTII and VT-XC generated report for user interface platform and iOS version.
· Added hardware revision fields for VTII and VT-XC.
· Updated TCC curve names for VTII and VT-XC to correctly match associated curve timings.
· Included 26 new timezones for selection in the time synchronization window for VTII and VT-XC.
· Updated WiFi password field for VTII and VT-XC to accept only ASCII characters.
· Added compatibility of VTII and VT-XC Settings file between iOS VT Programmer and Windows VTII / VT-XC Programmer.
· Added additional NR handle functions and dual modes for VTI FW v4.50 only.
· Added interlock to ensure SC Lockout cannot be selected unless last programmed shot is marked as SC.
· Disabled firmware upgrade capability.
· Bug fixes 3.3 05/25/2018 Corrected issue on iPhone App with recognition of Versa-Tech® LT WiFi network. 3.2 01/25/2017 •App available on iPhone
NOTE: iPhone app has restricted capabilities.
•Added capability to communicate with Versa-Tech® I (VTI) Recloser with FW v3.xx.
NOTE: Firmware Upgrade for Versa-Tech® I is available only for FW v4.xx.
•Added capability to communicate with Versa-Tech® LT Recloser (FW v5.xx).
•Added ability to download Oscillogram graph as a report and view them instantly or offline on the iPAD.
•Added restrictions on Minimum trip values, TCC curves and Reclose time built into the application.
•Bug fixes 3.1 03/31/2016 Single App that can communicate with Versa-Tech® I (VT-I) Recloser with FW v4.xx and above, equipped with Wi-Fi module (or) Versa-Tech® II (VT-II) Recloser equipped with Wi-Fi module.
•For the Versa-Tech® I Recloser, the ability to change the Wi-Fi SSID and password from the app was added.
•For the Versa-Tech® II Recloser, customers have all capabilities of v2.1 and more
- View Device and Audit Logs
- View Oscillogram for overcurrent events
- Export Demand log, Event log, Device log and Oscillogram data
- Set the Recloser in Hot Line Tag/Non Reclose from the app.
- Trip, Close or Lockout the Recloser from the app.
- Create multiple users and permission levels.
•The ability to download PDF reports and view them instantly or offline on the iPAD. The reports can also be shared via email.
•Bug fixes 3.0 01/21/2015 2.1 01/21/2014
VersaTech Recloser Programmer version 4.1
Updated At: 2025-02-15
Changes: Added extra validation on the "Write Settings" button for proper configuration of Non Reclose Handle mode.
VersaTech Recloser Programmer version 4.1
Updated At: 2025-02-15
Changes: Feb 15, 2025
Version 4.1
Added extra validation on the "Write Settings" button for proper configuration of Non Reclose Handle mode.
VersaTech Recloser Programmer version 4.0
Updated At: 2021-09-02
Changes: Sep 2, 2021 Version 4.0
- Corrects demand log issue where values are not displayed in GUI or on generated reports past 2 byte entry value (255).
- Supports communication for the following Versa-Tech type and firmware versions.
* Versa-Tech LT – all firmware versions
* Versa-Tech I – all firmware 3.xx and 4.xx versions
* Versa-Tech II and Versa-Tech XC firmware version 1.08.8 and higher
- Provides new feature functionality for firmware version 1.14.7 on Versa-Tech II and Versa-Tech XC
- Compatible with iOS12 through iOS14
VersaTech Recloser Programmer version 3.9
Updated At: 2020-10-23
Changes: Oct 23, 2020 Version 3.9
Features:
-Adds support for iOS 14.0.1 and higher.
Fixes:
-Corrects networking, graphics, and other issues when using prior App versions with iOS14 and higher.
Restrictions/Known Issues:
-App crashes when communicating with Versa-Tech II reclosers running version 1.06 firmware and lower.
-Recloser must be upgraded to firmware version 1.08.8 or higher via PC.
-App will crash/not allow user session with recloser
-Location services/permissions must be enabled to communicate with local (recloser) network per iOS14 requirements.
VersaTech Recloser Programmer version 3.8
Updated At: 2020-08-17
Changes: Aug 17, 2020 Version 3.8
-Compatible with iOS v12.4.8 and iOS 13.5.1 and higher.
-Fixes app crashing when modifying WiFi settings with channels received outside acceptable range.
VersaTech Recloser Programmer version 3.7
Updated At: 2020-06-01
Changes: Jun 1, 2020 Version 3.7
Features:
-Adds support for iOS 13.5 and prior versions.
-Updates TCC curve naming for each operation in generated report.
Fixes:
-Corrects issues accessing and modifying Time & Security settings.
-Corrects issues initializing connection to app.
VersaTech Recloser Programmer version 3.6
Updated At: 2019-12-26
Changes: Dec 26, 2019 Version 3.6
Release version 3.6 is compatible with all Versa-tech XC, Versa-Tech II, Versa-Tech I and Versa-Tech LT firmware versions to date. The following corrections are made with this release:
- Corrected issue where user cannot reinitiate the upgrade process on iPad App when Versa-Tech II or Versa-Tech XC goes into bootloader mode.
- Corrected issue where bootloader mode popup displays repeatedly on iPhone App when device is in bootloader mode.
- Corrected issue with demand log interval setting not updating when user loads settings profiles.
- Corrected issue of accepting duplicate or blank report/log names.
VersaTech Recloser Programmer version 3.1
Updated At: 2014-01-21
VersaTech Recloser Programmer version 3.8
Updated At: 1970-01-01
Changes: 2020年8月17日 Version 3.8
-Compatible with iOS v12.4.8 and iOS 13.5.1 and higher.
-Fixes app crashing when modifying WiFi settings with channels received outside acceptable range.
Disclaimer
Official App Store Link
We do not host VersaTech Recloser Programmer on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for VersaTech Recloser Programmer is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
