EA5HVK

Complete article about ROS Mode in the prestigious magazine Funk Amateur Sep 2010  (by Elke Barthels DM3ML)

The RSGB Contest Committee and the British Amateur Radio Teledata Group have joined forces to promote data modes in contesting.

For the first time, the RSGB HF Championship this year will include non-RSGB contests, beginning with the BARTG Sprint this weekend. This means that data enthusiasts will now be able to participate in the RSGB HF Championship. For more details see the RSGB Contest Committee website, www.rsgbcc.org.

Configuration is very easy and similar to eQSL . Simply enter your Upload Code  and click on the HRDLog check.

At the same time you press on EXPORT QSO,  the QSO will be sent to HRDLog.net.

Courtesy of IW1QLH.

http://www.hrdlog.net/

Some soundcard interfaces need an extra audio attenuation to avoid ALC saturation. A 10dB attenuator has been added in Soundcard Menu.

(And Happy New Year 2011 )

Now ROS CAT 2.0 scans and set the parameters of your Kenwood interface automatically.

Available since ROS v6.1.2 Beta.

Special thanks to:

EC5AAC (TS-870)
EA5GTU (TS-570)
EB4FMT (TS-2000,TS-850)
F5SZY(TS-950)
RA3GGW (TS2000)
F6AYB (TS-850)
DL1MNU (TS-480)
ON7KB (TS2000)
VE2JD (TS-850)

The following Certificates cannot be sent: Wrong Email.

Please, contact with EA5HJY: ea5hjy@ozu.es using a different email or download the Caertificate from here.

http://www.europeanrosclub.tk/

ROS CAT have been configurated for an optimum operation with ROS.

Features:

* Fast scanning
* Automatic setting interface parameters (RTS, CTS, DTR)
* Automatic Mode selection (USB, DIG-U or Packet-U)
* Automatic shift configuration for Packet-U mode (FT-950 and others)
* WIDTH to 2400Hz
* Contour to OFF
* Preamplifier OFF below 15 Mhz
* Preamplifier ON above 15 Mhz
* NR Filter to OFF
* Notch Filter to OFF
* VOX to OFF
* Split Mode to OFF
* SWR flag
* SWR Protection: In case of Hi-SWR, transmission is cut automatically.
* Squelch flag
* Power Slider on  main panel (Power in Watts or %)
* Tune operation on main panel
* PTT and CAT through the same or different port (virtual ports are not needed) 

Note1: These features are not available for all radios.

Tuner, Power Slider and Squelch Flag:

SWR Protection: In case of Hi-SWR, transmission is cut automatically. Useful for Beacon operation. (With the Test Tone Switch, this feature is disconnected)

HI-SWR Flag:

Thanks to:

EA5HUK (old EB5DBW): FT857
EB4FMT(Digicat): TS2000, FT736, FT817, FT857, FT897,
EA5HJY: FT950, IC725, IC707
F1BLZ: FT847
EB1MS: FT897
G0NBD: FT897
EA8IK: FT1000MP
EA2DLM: FT847
IZ0IWP: FT920
RN6AM: FT990
EA8TL: IC7000
EA3BKZ (Astroradio): PowerSDR
EA3OG: FT817
LZ1CWK: FT857
LA2VRA: FT2000
DG3GBE: FT736
SQ4INW: IC765
PA0HOP and PE8ROB: FT857/897
F5BQV: FT897
EA4BVZ: FT817
F1VS: FT897
F1EX: FT817
DD5XL: Ten-Tec Jupiter
DK5GM: FT847
VE2JD: TS-850

http://www.cb27.com/codigoq/?p=161