EA5HVK

Del 4 al 8 de Diciembre se celebra el Congreso URE 2010 en Albacete.

El día 7 a las 18:00 Mr. Vara  nos hablará del modo ROS.

Programa: http://seccion.albacete.ure.es/programa.htm

We have  hired a new server with more capacity. Available from v6.0.2.

Thanks for donations.

On Saturday, 27 November at 23:59:59 UTC, the new ROS4/2000 will be available.

This mode will have a better rejected against interferences maintaining the same noise sensivity than current ROS4.

Also, others changes have been done for the others modes, so old audio files cannot be decoded with new versions from 28 November.

If you use ROS this Saturday remember restart the software at  23:59:59 UTC to update changes.

New ROS frequency for enthusiastic CB users. 

You need a SoundCard Interfacing to use ROS with your CB Rig. Some interfaces use a optocoupler to switch the PTT. The optocoupler output current is not enough for a lot of CB Rigs. You should use then the typical 2N2222 transistor or, if you want a complete isolation, use a reed relay.

On Rig Menu, set PPT via COM and select your Serial Port Number. Pin is usually RTS (according your interface).

To do test, you can active the ROS Beacon.

Some enthusiastic CB links:

http://www.museo-cb.com/

http://www.cb27.com/

Now you can join to European ROS Club, founded by Manuel Sanchez  EA5HJY.

More info on:    http://www.europeanrosclub.tk/

New Macro in Macro Menu: <HISNAME>

Number of Callsigns has been inserted in Stats Menu

With Internal Spot Option you can send Internal Messages to ROS users. This spots don’t appear in the Cluster. 

There is Public Messages and Private Messages:

To send a Private Message write the Seen Callsign and press SEND PRIVATE:

With the new Online Database, doing click on a callsign, Name, QTH and Locator are filled in ADIF window directly. 

Red Led: No Internet access

Yellow Led: Callsign not registered yet

Green Led: Callsign OK

RPT Button, to repeat last transmission: