When PFAS contamination reaches the groundwater, the clock starts ticking. Plumes migrate, concentrations spread, and the window for cost-effective intervention narrows with every passing season. Traditional pump-and-treat systems can take years to design, procure, and commission, and all the while the contamination continues to move.
RemBind® Inject is designed for sites that cannot afford to wait. A modified RemBind® formulation, RemBind® Inject is for direct injection into contaminated groundwater zones for rapid immobilisation of PFAS, heavy metals, and other contaminants in aquifers.
Groundwater remediation has historically meant infrastructure, energy, and long lead times. Pump-and-treat systems extract contaminated water, treat it at surface, and reinject or discharge it, a process that is expensive to operate, difficult to sustain, and often unable to achieve meaningful mass removal from the source zone. Meanwhile, PFAS plumes continue to migrate through aquifers, crossing property boundaries and threatening drinking water sources.
RemBind® Inject takes a fundamentally different approach. Rather than extracting water and treating it at the surface, it delivers the treatment directly into the subsurface, where the contamination is.
Proven performance is the foundation. RemBind®’s core sorbent technology has been validated worldwide. It is cost-effective compared to ex-situ approaches, eliminating the need for pumping, excavation, and disposal. It is scalable, suited to both small source zone treatments and large plume interception programs.
And it is supported end-to-end, with RemBind®’s technical team providing conceptual site model review, injection design, equipment guidance, and post-injection performance monitoring from the outset.
RemBind® Inject is suited to any site where PFAS or other organic contaminants have impacted groundwater and a targeted, low-disturbance treatment is required:
RemBind® Inject is available in 15kg bags and 500kg bulk bags to suit projects of any scale, from targeted source zone treatments to large-scale permeable reactive barrier installations.
Our technical team works with you from the outset to develop an injection design and calculate reagent volumes specific to your site.
RemBind® Inject follows a clear, four-step process designed to maximise treatment effectiveness and minimise site disruption.
RemBind® is supported by a dedicated technical team, providing guidance on product selection, dosage optimisation, and application methods to ensure successful project outcomes.
Resources available for this product: