How to Mount a USB Drive on Raspberry Pi (3 Ways)

Mounting a USB drive can become a real headache and maybe a waste of time, especially if you are new to Raspberry Pi and Linux commands. Today, I’ll give you all the exact information you need to mount a USB drive quickly and easily.

In most cases, the USB drive is mounted automatically on Raspberry Pi OS.
If needed, the USB drive can be mounted manually by using the following command: sudo mount /dev/sda1 /mnt/usb. The /etc/fstab file can also be edited for an automatic mount on startup.

Don’t worry, I’ll explain how to connect your USB key or drive without having to remember 50 parameters. We’ll learn the manual way (for temporary devices) and the automatic way for devices you want to use often on your Raspberry Pi (like your RetroPie ROMs, movies, or a backup storage drive).

If you’re new to Raspberry Pi or Linux, I’ve got something that can help you right away!
Download my free Linux commands cheat sheet – it’s a quick reference guide with all the essential commands you’ll need to get things done on your Raspberry Pi. Click here to get it for free!

Hardware Requirements

Here is the recommended hardware to follow this tutorial:

• A Raspberry Pi 4: Or at least, try to pick a model with blue USB ports, it will be way faster than with older models.
• A fast USB drive: This is my favorite. You can now get SSD in external drives as well, making everything faster. And it’s not even more expensive than traditional slow drives.
  Related: Raspberry Pi Official USB Flash Drives: Are They Worth It?

And as for most projects, adding these optional accessories can make your life easier:

• A good keyboard and mouse: I use this one, but other options are available (I tested most of them in this comparison).
• A decent monitor: always easier to follow the instructions when you can see what’s going on with the Raspberry Pi, not switching from your computer to the Pi all the time.
• The best Raspberry Pi case: it’s the one I use all the time. It keeps my Pi protected and cool, a must-have (tested here).

Get Information About the USB Drive

Before going further, we need to collect information about your hard drive, such as the identifier and the file system type used on it.
We’ll also create a new folder to mount the drive in.

Note: If you want to see all these steps in action, I have a video lesson available for the community members. You can join here and watch it directly if you are interested (with 20+ other lessons for Raspberry Pi and many other benefits).

Prepare the Raspberry Pi

You can follow this tutorial with any Raspberry Pi OS version, and nearly any Linux distribution. No prerequisites, just adjust the commands if you are not using a Debian-based distribution.

I’ll assume you’re on Raspberry Pi OS Lite. If you have a Desktop, maybe you’ll get the help of the interface for some steps, but it shouldn’t be that different.

Before doing anything on your system, start by updating it with:
sudo apt update
sudo apt upgrade

And if you plan to use NTFS drives (Windows file system), check that you have the required package installed (NTFS is mainly for Windows devices and may not be required in your case).
You can install the package with:
sudo apt install ntfs-3g

It will tell you if you already have it installed.

Quick note: If you find it hard to remember all these commands, I’ve put them all on a one-page cheat sheet. You can download it for free here so you have it handy whenever you're working on a project.

Plug Your Device

You can then plug your device into a free USB port.
If you have a recent model, it’s better to plug the USB device into a blue port. USB 3 ports are faster overall.

For big external drives, you will need extra power to run the drive correctly (or the message “Under-voltage detected!” may appear).

Try to add a powered USB hub to the Raspberry Pi (check this one on Amazon for example, if you don’t already have one). Your hard drive will not work without that (unless it has its own power supply).

If you are using one, plug the hub into the Raspberry Pi and your hard drive directly on the hub.

And if you don’t have a USB drive yet, here are my two recommendations currently:

• This USB flash drive from SanDisk: I use it all the time. I rarely use SD cards now and install my new distributions on this instead. I’m pleased with it, as it’s fast and robust.
• This USB portable SSD: It’s perfect for the Raspberry Pi (almost the same size), it’s one of the fastest options, and I love SanDisk.

Collect More Information

Once the disk is plugged in, we need to know more about it before going further.

Fdisk

Fdisk is a tool to manage disks on Linux.
We’ll use it to display all disks and find your USB drive (full tutorial here).

Start with this command:
sudo fdisk -l

At the end of the command output, you should get something like this:

• First, be sure you’re checking the disk you want to mount
  Mainly check the size of the drive, to know if this is the good one (in this case I plugged an 8Go USB key, so I’m sure it is this one).
  If not sure, unplug it and run the command again to see which one disappears.
• Then remember two things:
  • The file system format type: here it’s FAT32, it could be NTFS or EXT4 for example.
  • The device name: here it’s /dev/sda1, we’ll need this later.

If your USB drive is not formatted, or if you want to use another file system, you should check my other tutorials on this website:

• Using the GUI: How To Install & Use Gparted On Raspberry Pi (Partition editor)
• Using the CLI: How To Use ‘fdisk’: The Complete Linux Command Guide

UUID

Another piece of information that could help us later is the UUID.
When you format a disk, the system assigns an ID to the disk.
We call this the UUID. This allows us to know it is a known drive and to do something specific when you plug it into your Raspberry Pi.

To get this UUID, run this command:
sudo ls -l /dev/disk/by-uuid/

You’ll get something like this:

Find the line corresponding to your drive name (sda1 for example).
Note the UUID just before the drive name (it could be longer depending on your disk).

Create a Mount Point

We are almost ready.
On Linux systems, you need to create a new folder to mount the drive in later.
Generally, we create it in /mnt or /media (you can read my article to learn more about the Linux file system overall).

Create the directory:
sudo mkdir /mnt/usb

We are ready with prerequisites.

Now, there are two ways to mount your USB drive:

• Manually: type a command line and get access to it quickly (perfect for temporary devices).
• Automatically: this needs more configuration to start, but this will be accessible automatically after a reboot.

I’m explaining the two methods in the next parts, so you can pick the one you prefer.

Manually Mount the USB drive

In this part, we’ll learn how to mount a USB drive quickly on the Raspberry Pi.

The Mount Command

The mount command allows us to mount a device to a specific folder.
In my case, I want to mount /dev/sda1 to /mnt/usb.

The command syntax is this:
sudo mount <DEVICE> <FOLDER> -o <OPTIONS>

So in my case:
sudo mount /dev/sda1 /mnt/usb -o uid=pat,gid=pat

Adapt this value to your system (make sure to replace “pat” in this command with your username).
The uid and gid options allow your user to read and write files on the USB key.
And then check you can see your files and create a new one:
ls -latr /mnt/usb
touch /mnt/usb/test

You’re ready to use it.
If you want to remove the USB key, you can unmount it with:
sudo umount /mnt/usb

Create a Small Script to Save Your Preferences

Even if this was the manual way to mount a USB drive, I recommend saving it in a script if you are not familiar with this kind of command.
This will save you searching this page next time.

Create a Small Script

• Create a new file:
  sudo nano /usr/local/bin/usb-connect.sh
• Paste these lines:
  #!/bin/bash
sudo mount /dev/sda1 /mnt/usb -o uid=pat,gid=pat
echo "USB drive mounted successfully"
  This is a basic script, adapt the values and add what you want.
• Save and exit (CTRL+O, CTRL+X).
• Add execution permission:
  sudo chmod +x /usr/local/bin/usb-connect.sh

Create an Alias

Creating an alias allows you to use a short command to run the script, instead of using the complete command we saw earlier, or the full path to the script.

• Edit your .bashrc file:
  nano ~/.bashrc
• Add this line at the end of the file:
  alias usbmount='/usr/local/bin/usb-connect.sh'
• Save and exit.
• Close the terminal or end your SSH connection.

Easy Mount

Next time you come into the terminal and plug your USB key, just use:
usbmount

And then it’s done.
No more mount command to remember.

Automatically Mount the USB drive

You already know how to manually mount your drive each time you plug it in, or boot your Raspberry Pi. But if you use your drive a lot, or even leave the drive plugged all the time, manually doing it every time is not the best way.

Instead, you can configure your Raspberry Pi to auto-mount it on boot.

The /etc/fstab File

/etc/fstab is a configuration file to configure a mount point for each device.
We’ll save in this file all information needed to mount our USB drive to /mnt/usb.

Follow this procedure to add your USB drive to this file:

• Open /etc/fstab:
  sudo nano /etc/fstab
• Add this line at the end:
  UUID=0DEC-3E3A /mnt/usb vfat uid=pat,gid=pat 0 0
  Replace the UUID and usernames with your own values.
  Replace vfat with your file system if needed (ntfs or ext4 for example).
• Save and exit.
• Reboot or try it directly with:
  sudo mount -a
  Your USB drive should now be available in the /mnt/usb folder.
  And Raspberry Pi OS will mount it automatically at each boot.
  If you want to add it after the boot, just run mount -a again, or mount /mnt/usb.

Using the UUID rather than the device name (/dev/sda1) allows us to be sure it is the correct device.

When you use multiple USB keys, for example, the first connection will be sda1 but you can’t know which one it is physically. With the UUID, you’re sure this is the right one.

You can create a mount point for each device if you want (/mnt/big_drive, /mnt/kingston_key, …).

Video

https://www.youtube.com/watch?v=fmbP8gcEX5w

You can now use USB drives on your Raspberry Pi, either manually (with mount) or automatically on the boot (with fstab).

USB drives can then be used for multiple things, including:

• Backup and Restore your Raspberry Pi
• Installing Windows 11 on Raspberry Pi (An Illustrated Guide)
• Getting Started with OpenMediaVault on Raspberry Pi (NAS interface)

Related Questions

There is no partition on my USB key, so I’m not able to mount it, what should I do?

The easiest way to create the first partition is to insert this key in a desktop OS (Windows or a Pi Desktop with GParted for example).

If you want to do this on a Raspberry Pi OS Lite instead, use the mkfs command: 
sudo mkfs -t fat32 /dev/sda1

More information here.

Whenever you’re ready, here are other ways I can help you:

Test Your Raspberry Pi Level (Free): Not sure why everything takes so long on your Raspberry Pi? Take this free 3-minute assessment and see what’s causing the problems.

The RaspberryTips Community: Need help or want to discuss your Raspberry Pi projects with others who actually get it? Join the RaspberryTips Community and get access to private forums, exclusive lessons, and direct help.

Master your Raspberry Pi in 30 days: If you are looking for the best tips to become an expert on Raspberry Pi, this book is for you. Learn useful Linux skills and practice multiple projects with step-by-step guides.

Master Python on Raspberry Pi: Create, understand, and improve any Python script for your Raspberry Pi. Learn the essentials step-by-step without losing time understanding useless concepts.

You can also find all my recommendations for tools and hardware on this page.