About Portacapture Control
■Portacapture’s operability at the palm of your hands The Portacapture Control is an app that provides operability with the same user interface as the touch panel on Portacapture. In addition to the basic REC start/stop,...
■Portacapture’s operability at the palm of your hands The Portacapture Control is an app that provides operability with the same user interface as the touch panel on Portacapture. In addition to the basic REC start/stop, gain adjustment, mixer control, mark registration, and all the other controls that can be performed on the main unit are available on this app. Moreover, you can always check information about the input level, recording progress/remaining time, battery level, as well as set various parameters including low-cut, limiter, and many more effects. ※The AK-BT1 Bluetooth adapter (separately sold) is needed to be able to control the main unit via the Portacapture Control app. For more information on how to connect Portacapture and AK-BT1 or how to use Portacapture Control, please refer to the instruction manual. ※This app does not support monitoring of the main unit’s input sound. To monitor this, please use the headphones output or the speaker function on Portacapture. Please carefully read the license agreement below before using this application. http://tascam.jp/content/downloads/products/862/license_e_app_license.pdf
Version History - MTR application "POCKET STUDIO" has been added. - A tuner application has been added. - When recording in MANUAL mode, two mixes were recorded at the same time, but the user can now choose whether to record or not. - EXPANDED PRE REC mode has been added to the prerecording function available when using the FIELD app. - Operation stability has been improved in other ways. 2.0.0 09/18/2024 No changes have been made to use and functions with the Portacaptue X8. [ New functions ] - Unit settings and recording app settings can now be saved in up to 3 USER SETTINGS and recalled with a single tap from the LAUNCHER screen. - INPUT SETTINGS, including for the low-cut filter, compressor, limiter, auto gain control, noise gate and other effect functions can now be saved in up to 3 presets and loaded in each recording app. - The USB MIX MINUS function can now be used in the PODCAST app. This can suppress the occurrence of echoes in audio from remote participants when capturing podcasts. - In addition to built-in mic input, selecting PAD and USB input is now possible when using the PODCAST app. - When the Portacapture Control remote control app is communicating in the background on a device, for example, connection with the unit will no longer be interrupted, even if the device itself enters energy-saving mode. [ Maintenance items ] - Operation stability has been improved in other ways. 1.3.3 05/24/2023 ・No changes have been made to use and functions with the Portacaptue X6. ・The name of the “PUNCH I/O” mode has been changed to "OVERDUB / PUNCH I/O” in the MANUAL app. Note: Only the name has been changed. The functionality itself has not changed. ・When the Portacapture Control remote control app is communicating in the background on a device, for example, connection with the unit will no longer be interrupted, even if the device itself enters energy-saving mode. 1.3.2 04/26/2023 ・The USB MIX MINUS function can now be used in the PODCAST app. This can suppress the occurrence of echoes in audio from remote participants when capturing podcasts. ・INPUT SETTINGS, including for the low-cut filter, compressor, limiter, auto gain control, noise gate and other effect functions can now be saved in up to 3 presets and loaded in each recording app. ・Unit settings and recording app settings can now be saved in up to 3 USER SETTINGS and recalled with a single tap from the LAUNCHER screen. ・Operation stability has been improved in other ways. 1.3.0 09/01/2022 ・ Overload displays for detecting input signal distortion on analog circuits have been added. This allows excessive input to be checked in an instant and recording conditions to be adjusted. ・ The hold functions of the Portacapture X8 unit and the Portacapture Control remote control app have been made independent. This makes disabling each operations separately possible. ・ A solo monitoring function for each track has been added to the INPUT SETTINGS screen. ・ A solo monitoring function for each track has been added to the MIXER screens of the MANUAL and PODCAST apps. ・ A shortcut function that enables returning to the LAUNCHER directly has been added to each app. ・ Operation stability has been improved in other ways. 1.1.0 04/28/2022 - Browsing operation has been improved. When the BROWSE screen is opened, the current file is now shown highlighted. - Some screen design changes have been made. - Operation stability has been improved. 1.0.3 01/31/2022 1.0.0 11/17/2021
Previous Versions
Here you can find the changelog of Portacapture Control since it was posted on our website on 2023-09-04 23:01:27.
The latest version is 2.0.0 and it was updated on 2026-06-23 23:30:39. See below the changes in each version.
Portacapture Control version 2.0.0
Updated At: 2026-06-03
Changes: Version History - MTR application "POCKET STUDIO" has been added.
- A tuner application has been added.
- When recording in MANUAL mode, two mixes were recorded at the same time, but the user can now choose whether to record or not.
- EXPANDED PRE REC mode has been added to the prerecording function available when using the FIELD app.
- Operation stability has been improved in other ways. 2.0.0 09/18/2024 No changes have been made to use and functions with the Portacaptue X8.
[ New functions ]
- Unit settings and recording app settings can now be saved in up to 3 USER SETTINGS and recalled with a single tap from the LAUNCHER screen.
- INPUT SETTINGS, including for the low-cut filter, compressor, limiter, auto gain control, noise gate and other effect functions can now be saved in up to 3 presets and loaded in each recording app.
- The USB MIX MINUS function can now be used in the PODCAST app.
This can suppress the occurrence of echoes in audio from remote participants when capturing podcasts.
- In addition to built-in mic input, selecting PAD and USB input is now possible when using the PODCAST app.
- When the Portacapture Control remote control app is communicating in the background on a device, for example, connection with the unit will no longer be interrupted, even if the device itself enters energy-saving mode.
[ Maintenance items ]
- Operation stability has been improved in other ways. 1.3.3 05/24/2023 ・No changes have been made to use and functions with the Portacaptue X6.
・The name of the “PUNCH I/O” mode has been changed to "OVERDUB / PUNCH I/O” in the MANUAL app.
Note: Only the name has been changed. The functionality itself has not changed.
・When the Portacapture Control remote control app is communicating in the background on a device, for example, connection with the unit will no longer be interrupted, even if the device itself enters energy-saving mode. 1.3.2 04/26/2023 ・The USB MIX MINUS function can now be used in the PODCAST app. This can suppress the occurrence of echoes in audio from remote participants when capturing podcasts.
・INPUT SETTINGS, including for the low-cut filter, compressor, limiter, auto gain control, noise gate and other effect functions can now be saved in up to 3 presets and loaded in each recording app.
・Unit settings and recording app settings can now be saved in up to 3 USER SETTINGS and recalled with a single tap from the LAUNCHER screen.
・Operation stability has been improved in other ways. 1.3.0 09/01/2022 ・ Overload displays for detecting input signal distortion on analog circuits have been added.
This allows excessive input to be checked in an instant and recording conditions to be adjusted.
・ The hold functions of the Portacapture X8 unit and the Portacapture Control remote control app have been made independent.
This makes disabling each operations separately possible.
・ A solo monitoring function for each track has been added to the INPUT SETTINGS screen.
・ A solo monitoring function for each track has been added to the MIXER screens of the MANUAL and PODCAST apps.
・ A shortcut function that enables returning to the LAUNCHER directly has been added to each app.
・ Operation stability has been improved in other ways. 1.1.0 04/28/2022 - Browsing operation has been improved.
When the BROWSE screen is opened, the current file is now shown highlighted.
- Some screen design changes have been made.
- Operation stability has been improved. 1.0.3 01/31/2022 1.0.0 11/17/2021
Portacapture Control version 2.0.0
Updated At: 2024-09-18
Changes: Sep 18, 2024
Version 2.0.0
- MTR application "POCKET STUDIO" has been added.
- A tuner application has been added.
- When recording in MANUAL mode, two mixes were recorded at the same time, but the user can now choose whether to record or not.
- EXPANDED PRE REC mode has been added to the prerecording function available when using the FIELD app.
- Operation stability has been improved in other ways.
Portacapture Control version 2.0.0
Updated At: 2024-09-18
Changes: - MTR application "POCKET STUDIO" has been added.
- A tuner application has been added.
- When recording in MANUAL mode, two mixes were recorded at the same time, but the user can now choose whether to record or not.
- EXPANDED PRE REC mode has been added to the prerecording function available when using the FIELD app.
- Operation stability has been improved in other ways.
Portacapture Control version 1.3.3
Updated At: 2023-05-24
Changes: May 24, 2023
Version 1.3.3
No changes have been made to use and functions with the Portacaptue X8.
[ New functions ]
- Unit settings and recording app settings can now be saved in up to 3 USER SETTINGS and recalled with a single tap from the LAUNCHER screen.
- INPUT SETTINGS, including for the low-cut filter, compressor, limiter, auto gain control, noise gate and other effect functions can now be saved in up to 3 presets and loaded in each recording app.
- The USB MIX MINUS function can now be used in the PODCAST app.
This can suppress the occurrence of echoes in audio from remote participants when capturing podcasts.
- In addition to built-in mic input, selecting PAD and USB input is now possible when using the PODCAST app.
- When the Portacapture Control remote control app is communicating in the background on a device, for example, connection with the unit will no longer be interrupted, even if the device itself enters energy-saving mode.
[ Maintenance items ]
- Operation stability has been improved in other ways.
Disclaimer
Official App Store Link
We do not host Portacapture Control on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for Portacapture Control is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
