About Pipefitter
Application Pipefitter allows you to calculate odd angles, elbows, tees, problematic offset pipes and mark them with measuring tape, caliper or height gauge on the work bench. You can measure everything in a simple way:...
Application Pipefitter allows you to calculate odd angles, elbows, tees, problematic offset pipes and mark them with measuring tape, caliper or height gauge on the work bench. You can measure everything in a simple way: from "face to face", or ”center to center”, and quickly get the solution in the App. Standard pipe sizes and long radius elbows (including ANSI and DIN) can be selected from the list of up to 40 inches. The entire process consists of three steps: 1) determining the purpose of calculation (question mark symbol) 2) entering the data 3) displaying the result of a calculation. The result: we have all the necessary information which are needed to create and fold your pipe. Drawings clearly show you the way of what you are looking for and what you need to do. It speeds up the process of work of pipe fitters. The application is being updated all the time and oriented to develop and extend, basing on suggestions of other pipe fitters.
Version History • Improved offset validation, and the warning for exceeding an offset larger than two 90° elbows now appears only in modules without insert. 5.1.6 06/03/2025 • Added validation in the “no insert” sections to prevent entering an offset larger than the combined size of two elbows • Fixed a bug where elbows with a short radius weren’t being added to the list (now both short and long radius elbows are supported) 5.1.5 05/30/2025 Fixed a bug in the 'Back to Back'/ 'Offset XY' sections where calculations were displayed incorrectly. 5.1.4 10/12/2024 Keyboard display issue 5.1.3 07/04/2023 new language versions 5.1.2 06/28/2023 Adapting the view to different types of iPhone models 5.1.1 06/27/2023 This update from Apple will improve the functionality of this app. No new features are included. New functionality with more readable drawings.The square function has been added in diagonally section. Added back button to previous section and progress bar, which lets you know at what stage are the calculations. 2.7 09/11/2017 New clearer graphics in the section data input 2.3 06/05/2016 - rolling offset - calculation 45 degree and other angles - tee - calculating the angle if you enter vertical and horizontal offset 2.2 05/23/2016 2.0.0.1 02/25/2016
Previous Versions
Here you can find the changelog of Pipefitter since it was posted on our website on 2023-09-25 11:07:11.
The latest version is 5.1.6 and it was updated on 2026-06-12 21:51:17. See below the changes in each version.
Pipefitter version 5.1.6
Updated At: 2026-06-12
Changes: Version History • Improved offset validation, and the warning for exceeding an offset larger than two 90° elbows now appears only in modules without insert. 5.1.6 06/03/2025 • Added validation in the “no insert” sections to prevent entering an offset larger than the combined size of two elbows
• Fixed a bug where elbows with a short radius weren’t being added to the list (now both short and long radius elbows are supported) 5.1.5 05/30/2025 Fixed a bug in the 'Back to Back'/ 'Offset XY' sections where calculations were displayed incorrectly. 5.1.4 10/12/2024 Keyboard display issue 5.1.3 07/04/2023 new language versions 5.1.2 06/28/2023 Adapting the view to different types of iPhone models 5.1.1 06/27/2023 This update from Apple will improve the functionality of this app. No new features are included.
New functionality with more readable drawings.The square function has been added in diagonally section. Added back button to previous section and progress bar, which lets you know at what stage are the calculations. 2.7 09/11/2017 New clearer graphics in the section data input 2.3 06/05/2016 - rolling offset - calculation 45 degree and other angles
- tee - calculating the angle if you enter vertical and horizontal offset 2.2 05/23/2016 2.0.0.1 02/25/2016
Pipefitter version 5.1.6
Updated At: 2025-06-03
Changes: Jun 3, 2025
Version 5.1.6
• Improved offset validation, and the warning for exceeding an offset larger than two 90° elbows now appears only in modules without insert.
Pipefitter version 5.1.6
Updated At: 2025-06-03
Changes: • Improved offset validation, and the warning for exceeding an offset larger than two 90° elbows now appears only in modules without insert.
Pipefitter version 5.1.5
Updated At: 2025-05-30
Changes: May 30, 2025
Version 5.1.5
• Added validation in the “no insert” sections to prevent entering an offset larger than the combined size of two elbows
• Fixed a bug where elbows with a short radius weren’t being added to the list (now both short and long radius elbows are supported)
Pipefitter version 5.1.4
Updated At: 2024-10-12
Changes: Oct 12, 2024
Version 5.1.4
Fixed a bug in the 'Back to Back'/ 'Offset XY' sections where calculations were displayed incorrectly.
Pipefitter version 5.1.3
Updated At: 2023-07-04
Changes: Jul 4, 2023
Version 5.1.3
Keyboard display issue
Disclaimer
Official App Store Link
We do not host Pipefitter on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for Pipefitter is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
