About moneo|blue classic
With the ifm moneo|blue app you can wirelessly connect to ifm IO-Link Masters (FW > V2.1) via the ifm inline and multi-Bluetooth Adapters (Art.Nr E30446 and EIO330), read IO-Link Process Data, Diagnostic Events, and...
Version History - The app did not write the LRP file for some non ifm sensor. Now the app will write the LRP file even if the sensor has some parameter without values, so called Null value. - The app displayed an error for some non-ifm sensors because these sensors do have different structure in the IODD. Now the app can also handle such IODDs. - The countries whitelist was extended to all countries according to the Bluetooth certification for the adapters. 1.8.3 10/31/2025 Bug Fixed - The app crashed while writing network parameters for some AL-masters. This was true in case of DHCP parameter is not there. Now the network parameters are processed correctly according to availability of the parameters. 1.8.1 07/11/2025 Corrections for the validation of network settings (DHCP, subnet mask, IP, default gateway) and improved the error messages for the network settings. Fixed one bug when writing network settings to the master AL135x. 1.8.0 06/03/2025 Bug fixes - The app crashed when user is waiting for more than 2 minutes on the pairing popup without action. - If user goes repeatedly taps on a tile in the base station overview then the “Reading parameters from devices” popup appears and the progress bar got stuck. - If user is on the Diagnosis screen of an IO-Link device which is connected to an Multi adapter and the user performs "Read from device" then the values changed to 0. Now the correct values are shown. Performance enhancements: - Download of recordings was too slow and was accelerated. Actual increase in download speed depends on the smartphone. 1.7.8 11/20/2024 Bug fixes 1.7.3 07/29/2024 Bug fixes 1.7.2 06/25/2024 - Now moneo|blue is renamed as moneo|blue classic - Announcement of new moneo|blue app when connecting to ifm mesh devices - Demo Mode - User can experience monoe|blue classic without any hardware setup - Importing LRP File Functionality - Updating Mesh Adapter firmware through Base station - Firmware Update check for Base station and Mesh Adapter while connecting to it - MK5xxx teach functionality changes - Bug fixes 1.7.1 04/17/2024 New Feature * Support DataStorage feature of IO-Link devices * User are able to update the firmware of Base Station and Mesh Adapter Bug Fixes * Optimization for Cockpit and Parametrization screens * Cache mechanism implemented to improve speed of displaying the parameter screens * Improve support for MK5xxx sensor graphically * MQTT parameter can be parametrized for Base Station 1.6.1 02/07/2024 * Optimization and performance changes for Cockpit and Parametrization screens * Cache mechanism implemented i.e., when you go to cockpit screen second time without disconnecting any ifm Bluetooth Adapter, then it will read data from cache and navigation will be faster. * Support Request are resolved * User Acceptance Test findings are resolved * Support for MK5xxx sensor graphically * MQTT parameter can be parametrize for Base Station * Bluetooth Mesh Functionality improvements and Bug fixes * User can be able to update the firmware of Base Station and Mesh Adapter through moneo|blue app 1.6 08/04/2023 - Implemented Bluetooth Mesh Functionality - Supporting two new Bluetooth devices i.e. ifm Base Station & ifm Mesh Adapter - App can able to provision and un-provision the Mesh Adapter with Base Station - Connect to Base Station and get an glance of 50 IO-Link sensor process values & configure basic attribute of Base Station - App can now able to parametrize 50 io-link sensor by connecting to Base Station (one sensor at a time) - App can now able to parametrize single sensor by connecting to an Mesh Adapter - Bug fixes for ifm Multi & Inline Adapter Feature 1.5 03/03/2023 - Bug Fixes - DTI(RFID) Sensor Manual Read & Write Data is functional now. - Generic PDOut Functionality to change PDout Data of any sensor. - Visual Signal Strength of ifm Bluetooth Adapter on scanning screen. 1.4.9 09/02/2022 Bug fixes 1.4.8 05/23/2022 1. LW2720 & MVQ201 device has now graphical representation 2. Showing Recording Status symbol for individual device on Master Overview Screen 3. Now the recorded data have an in-app viewer to view the process data in an chart format which also has zoom functionality 4. Events screen has been redesigned in cards style 5. Generic device dashboard now include charts which has zoom functionality 6. Now showing Bluetooth disclaimer popup based on country available radio certificate. 7. Redesigned the signal graphics for VVB device i.e. VVB001 Status A as well as Status B 8. Export of parameter is availed in floating button options on cockpit or dashboard screen 1.4 04/19/2022 - Bug Fixes 1.2.1 11/03/2021 - Added Cancel functionality while Reading the Parameter of the sensor - Export LRP Files i.e. Parameterization files from any sensor - Quick Sharing option is available after exporting LRP file - Graphical and JSON Architecture Support of VVB001 Status A and Status B Sensor - Generic Blob Extract functionality is available - Added Breadcrumb Navigation - User can quickly jump from one sensor to another - Generic Dashboard for generic sensor will have chart - Added Floating button for doing quick action like read or write - Now Storage Data Page will consist of recorded files, parametrization files (LRP) and Blob Files. - Graphical and JSON Architecture Support for DTI231 sensor 1.2 09/09/2021 * Graphical or JSON Architecture support for sensor TN2105, LR2050 and LR2750 * Redesign or JSON Architecture support for sensor MVQ101 and TCC231 * Tablet Support * AL Master Basic Network Parameterization * Blink Functionality for AL Master * Now support of Block Parameterization for sensor support it * All Recorded File will be merged into an single Zip file * Clever refresh for Master Overview page * In built firmware update for Multi Adapter whose version is less than or equal to 0.19 * Battery Consumption Optimization * Bug Fixes for last store release 1.0.5 05/01/2021 * Graphical or JSON Architecture support for sensor TN2105, LR2050 and LR2750 * Redesign or JSON Architecture support for sensor MVQ101 and TCC231 * Tablet Support * AL Master Basic Network Parameterization * Blink Functionality for AL Master * Now support of Block Parameterization for sensor support it * All Recorded File will be merged into an single Zip file * Clever refresh for Master Overview page * In built firmware update for Multi Adapter whose version is less than or equal to 0.19 * Battery Consumption Optimization * Bug Fixes for last store release 1.0.4 04/14/2021 1.0.3 01/08/2021
Previous Versions
Here you can find the changelog of moneo|blue classic since it was posted on our website on 2023-09-08 12:01:36.
The latest version is 1.8.3 and it was updated on 2026-06-25 09:03:24. See below the changes in each version.
moneo|blue classic version 1.8.3
Updated At: 2026-06-04
Changes: Version History - The app did not write the LRP file for some non ifm sensor. Now the app will write the LRP file even if the sensor has some parameter without values, so called Null value.
- The app displayed an error for some non-ifm sensors because these sensors do have different structure in the IODD. Now the app can also handle such IODDs.
- The countries whitelist was extended to all countries according to the Bluetooth certification for the adapters. 1.8.3 10/31/2025 Bug Fixed
- The app crashed while writing network parameters for some AL-masters. This was true in case of DHCP parameter is not there. Now the network parameters are processed correctly according to availability of the parameters. 1.8.1 07/11/2025 Corrections for the validation of network settings (DHCP, subnet mask, IP, default gateway) and improved the error messages for the network settings. Fixed one bug when writing network settings to the master AL135x. 1.8.0 06/03/2025 Bug fixes
- The app crashed when user is waiting for more than 2 minutes on the pairing popup without action.
- If user goes repeatedly taps on a tile in the base station overview then the “Reading parameters from devices” popup appears and the progress bar got stuck.
- If user is on the Diagnosis screen of an IO-Link device which is connected to an Multi adapter and the user performs "Read from device" then the values changed to 0. Now the correct values are shown.
Performance enhancements:
- Download of recordings was too slow and was accelerated. Actual increase in download speed depends on the smartphone. 1.7.8 11/20/2024 Bug fixes 1.7.3 07/29/2024 Bug fixes 1.7.2 06/25/2024 - Now moneo|blue is renamed as moneo|blue classic
- Announcement of new moneo|blue app when connecting to ifm mesh devices
- Demo Mode - User can experience monoe|blue classic without any hardware setup
- Importing LRP File Functionality
- Updating Mesh Adapter firmware through Base station
- Firmware Update check for Base station and Mesh Adapter while connecting to it
- MK5xxx teach functionality changes
- Bug fixes 1.7.1 04/17/2024 New Feature
* Support DataStorage feature of IO-Link devices
* User are able to update the firmware of Base Station and Mesh Adapter
Bug Fixes
* Optimization for Cockpit and Parametrization screens
* Cache mechanism implemented to improve speed of displaying the parameter screens
* Improve support for MK5xxx sensor graphically
* MQTT parameter can be parametrized for Base Station 1.6.1 02/07/2024 * Optimization and performance changes for Cockpit and Parametrization screens
* Cache mechanism implemented i.e., when you go to cockpit screen second time without disconnecting any ifm Bluetooth Adapter, then it will read data from cache and navigation will be faster.
* Support Request are resolved
* User Acceptance Test findings are resolved
* Support for MK5xxx sensor graphically
* MQTT parameter can be parametrize for Base Station
* Bluetooth Mesh Functionality improvements and Bug fixes
* User can be able to update the firmware of Base Station and Mesh Adapter through moneo|blue app 1.6 08/04/2023 - Implemented Bluetooth Mesh Functionality
- Supporting two new Bluetooth devices i.e. ifm Base Station & ifm Mesh Adapter
- App can able to provision and un-provision the Mesh Adapter with Base Station
- Connect to Base Station and get an glance of 50 IO-Link sensor process values & configure basic attribute of Base Station
- App can now able to parametrize 50 io-link sensor by connecting to Base Station (one sensor at a time)
- App can now able to parametrize single sensor by connecting to an Mesh Adapter
- Bug fixes for ifm Multi & Inline Adapter Feature 1.5 03/03/2023 - Bug Fixes
- DTI(RFID) Sensor Manual Read & Write Data is functional now.
- Generic PDOut Functionality to change PDout Data of any sensor.
- Visual Signal Strength of ifm Bluetooth Adapter on scanning screen. 1.4.9 09/02/2022 Bug fixes 1.4.8 05/23/2022 1. LW2720 & MVQ201 device has now graphical representation
2. Showing Recording Status symbol for individual device on Master Overview Screen
3. Now the recorded data have an in-app viewer to view the process data in an chart format which also has zoom functionality
4. Events screen has been redesigned in cards style
5. Generic device dashboard now include charts which has zoom functionality
6. Now showing Bluetooth disclaimer popup based on country available radio certificate.
7. Redesigned the signal graphics for VVB device i.e. VVB001 Status A as well as Status B
8. Export of parameter is availed in floating button options on cockpit or dashboard screen 1.4 04/19/2022 - Bug Fixes 1.2.1 11/03/2021 - Added Cancel functionality while Reading the Parameter of the sensor
- Export LRP Files i.e. Parameterization files from any sensor - Quick Sharing option is available after exporting LRP file
- Graphical and JSON Architecture Support of VVB001 Status A and Status B Sensor
- Generic Blob Extract functionality is available
- Added Breadcrumb Navigation - User can quickly jump from one sensor to another
- Generic Dashboard for generic sensor will have chart
- Added Floating button for doing quick action like read or write
- Now Storage Data Page will consist of recorded files, parametrization files (LRP) and Blob Files.
- Graphical and JSON Architecture Support for DTI231 sensor 1.2 09/09/2021 * Graphical or JSON Architecture support for sensor TN2105, LR2050 and LR2750
* Redesign or JSON Architecture support for sensor MVQ101 and TCC231
* Tablet Support
* AL Master Basic Network Parameterization
* Blink Functionality for AL Master
* Now support of Block Parameterization for sensor support it
* All Recorded File will be merged into an single Zip file
* Clever refresh for Master Overview page
* In built firmware update for Multi Adapter whose version is less than or equal to 0.19
* Battery Consumption Optimization
* Bug Fixes for last store release 1.0.5 05/01/2021 * Graphical or JSON Architecture support for sensor TN2105, LR2050 and LR2750
* Redesign or JSON Architecture support for sensor MVQ101 and TCC231
* Tablet Support
* AL Master Basic Network Parameterization
* Blink Functionality for AL Master
* Now support of Block Parameterization for sensor support it
* All Recorded File will be merged into an single Zip file
* Clever refresh for Master Overview page
* In built firmware update for Multi Adapter whose version is less than or equal to 0.19
* Battery Consumption Optimization
* Bug Fixes for last store release 1.0.4 04/14/2021 1.0.3 01/08/2021
moneo|blue classic version 1.8.3
Updated At: 2025-10-31
Changes: - The app did not write the LRP file for some non ifm sensor. Now the app will write the LRP file even if the sensor has some parameter without values, so called Null value.
- The app displayed an error for some non-ifm sensors because these sensors do have different structure in the IODD. Now the app can also handle such IODDs.
- The countries whitelist was extended to all countries according to the Bluetooth certification for the adapters.
moneo|blue classic version 1.8.1
Updated At: 2025-07-11
Changes: Jul 11, 2025
Version 1.8.1
Bug Fixed
- The app crashed while writing network parameters for some AL-masters. This was true in case of DHCP parameter is not there. Now the network parameters are processed correctly according to availability of the parameters.
moneo|blue classic version 1.7.8
Updated At: 2024-11-20
Changes: Nov 20, 2024
Version 1.7.8
Bug fixes
- The app crashed when user is waiting for more than 2 minutes on the pairing popup without action.
- If user goes repeatedly taps on a tile in the base station overview then the “Reading parameters from devices” popup appears and the progress bar got stuck.
- If user is on the Diagnosis screen of an IO-Link device which is connected to an Multi adapter and the user performs "Read from device" then the values changed to 0. Now the correct values are shown.
Performance enhancements:
- Download of recordings was too slow and was accelerated. Actual increase in download speed depends on the smartphone.
moneo|blue classic version 1.7.3
Updated At: 2024-07-29
Changes: Jul 29, 2024
Version 1.7.3
Bug fixes
moneo|blue classic version 1.7.2
Updated At: 2024-06-25
Changes: Jun 25, 2024
Version 1.7.2
Bug fixes
moneo|blue classic version 1.7.1
Updated At: 2024-04-17
Changes: Apr 17, 2024
Version 1.7.1
- Now moneo|blue is renamed as moneo|blue classic
- Announcement of new moneo|blue app when connecting to ifm mesh devices
- Demo Mode - User can experience monoe|blue classic without any hardware setup
- Importing LRP File Functionality
- Updating Mesh Adapter firmware through Base station
- Firmware Update check for Base station and Mesh Adapter while connecting to it
- MK5xxx teach functionality changes
- Bug fixes
moneo|blue classic version 1.6.1
Updated At: 2024-02-07
Changes: Feb 7, 2024
Version 1.6.1
New Feature
* Support DataStorage feature of IO-Link devices
* User are able to update the firmware of Base Station and Mesh Adapter
Bug Fixes
* Optimization for Cockpit and Parametrization screens
* Cache mechanism implemented to improve speed of displaying the parameter screens
* Improve support for MK5xxx sensor graphically
* MQTT parameter can be parametrized for Base Station
moneo|blue classic version 1.6
Updated At: 2023-08-04
Changes: Aug 4, 2023
Version 1.6
* Optimization and performance changes for Cockpit and Parametrization screens
* Cache mechanism implemented i.e., when you go to cockpit screen second time without disconnecting any ifm Bluetooth Adapter, then it will read data from cache and navigation will be faster.
* Support Request are resolved
* User Acceptance Test findings are resolved
* Support for MK5xxx sensor graphically
* MQTT parameter can be parametrize for Base Station
* Bluetooth Mesh Functionality improvements and Bug fixes
* User can be able to update the firmware of Base Station and Mesh Adapter through moneo|blue app
Disclaimer
Official App Store Link
We do not host moneo|blue classic on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for moneo|blue classic is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
