About JAYCOMMAND/TravelLINK
JAYCOMMAND/TravelLINK powered by BMPRO is an RV control and monitoring system for easy management of RV features via an app on your own device. It is specifically designed to work with the North American RVs such as...
JAYCOMMAND/TravelLINK powered by BMPRO is an RV control and monitoring system for easy management of RV features via an app on your own device. It is specifically designed to work with the North American RVs such as JAYCO, Highland Ridge and Starcraft - check your RV specifications to ensure your vehicle is compatible with this app. JAYCOMMAND/TravelLINK powered by BMPRO brings all the important controls and monitoring functions of the RV to a mobile device via Bluetooth and via cloud. Control and monitor an RV with confidence and ease from the palm of your hand and enjoy the following JAYCOMMAND/TravelLINK powered by BMPRO features*: . Monitor - water tanks, temperatures, propane levels, tire pressure, battery voltages and more . Control - lighting, slide-outs, awnings, HVAC, generators and more . Interact with RV via user-friendly, easy to understand app on your own device . Multiple communication protocols, including Bluetooth and RVIA industry standard RV-C CAN bus. JAYCOMMAND/TravelLINK on board your RV is flexible and scalable - it is easy to add features and sensors to expand your system through the addition of SmartConnect Bluetooth sensors. Available through RV Dealerships, SmartConnect sensors enable you to monitor propane levels, tire pressure and internal temperatures. The SmartConnect sensors are a DIY installation. JAYCOMMAND/TravelLINK powered by BMPRO system is co-designed and manufactured by BMPRO, a company with years of experience in the RV industry. BMPRO is one of the pioneers of using digital platforms in RVs with one of the world’s largest install bases of smart power management systems. *App capabilities vary depending on your RV model.
Version History - General enhancements - Bug-fixes 3.18.2 08/11/2024 * Support for new RV models * Other minor improvements 3.18.0 05/28/2024 * Support two solar controller instances for Chassis and House battery * Allow the generator to continue running after ignition is turned off, if the generator was manually started. Applies to Motorhomes only. * Increased upper limit of MIN voltage to 13.3V in Energy Center Settings (conditional) * Support for new RV models * Other minor improvements 3.16.0 04/15/2024 * Added extra temperature filtering to climate controls * Support for battery-less Controller on older systems * Support for new RV models * Minor improvements for a better user experience 3.14.0 12/17/2023 * Introduce a 3 min re-start delay for climate controls to prevent short cycling * Suppress water tank notification while travelling * New on-screen notification for slideout door interlock * Support for battery-less Controller * Minor Quick Start guide improvements * Generator lockout change for motorhomes to allow use of AGS while driving * Automatically cancel motor lockout for motorhomes after driving * Support for new RV models * Minor bug fixes to ensure a more enjoyable travel experience 3.12.0 10/13/2023 * Added Quick Start – Camp set up and Pack Up sequence * Added Bluetooth notifications for water tank levels * Increased the maximum settable battery GOAL voltage in Energy Center Settings * Miscellaneous updates to Solar Controller and Inverter * Support for new RV models * Minor bugfixes for selected models 3.11.0 07/11/2023 * Support for new RV models * Minor changes and bugfixes for selected models 3.9.0 03/22/2023 * Support for new RV models 3.7.0 01/09/2023 * Minor bugfix for selected models 3.5.1 10/26/2022 * Expand TPMS pressure range and changes to kPa display resolution * Support for new RV models 3.5.0 10/15/2022 HVAC and Inverter Diagnostics New Floor Plans Local Notification Improved Node Reset 3.3.0 07/16/2022 * Ability to pair with additional Bluetooth wall switches * Updated firmware * New RV models * Bug fixes & improvements. 3.1.0 12/18/2021 * Support for new RV models * Support additional motors, Bluetooth extender * Option to hide Bluetooth tire pressure and temperature sensors * Firmware update * Other minor enhancements. 2.6.0 09/28/2021 * Support for Highland Ridge and Starcraft RVs * Detailed error notifications * Support for 6-point hydraulic levelers * Heat pump support available on the extended range of RVs * Tredit Tire pressure monitoring (TPMS) integration * Cloud login support now available on all models. 2.5.0 06/20/2021 Support for JayFeather - 1JM model added 2.3.1 03/23/2021 * Support RV-C compliant solar controllers, such as Go Power * Auto-Generator-Start (AGS) * Ability to turn on/off AC fan in Furnace Mode (applicable only to selected models) * Support for tankless water heater (selected models only) * Support for new RV models. * New firmware updates * Bug fixes and improvements 2.3.0 03/08/2021 - Generator control via cloud on some models (Note: Requires APP Version Number v2.1.2 or higher on the CONTROLLER in your RV) - Support of a new RV model- Support of a new RV model 2.1.2 11/04/2020 Supporting additional RV models 2.1.1 09/30/2020 Supporting additional RV models Improved “About” screen information Bug fixes 2.1.0 08/25/2020 Fixed an issue with wireless temperature sensors 2.0.1 06/29/2020 Supporting additional RV models 2.0 06/02/2020 Bug fixes and improvements to cloud connectivity 1.10.3 04/07/2020 - Ability to integrate Bluetooth tire pressure, propane tank and temperature sensors to the system - Increased settable HVAC range - Added notifications for tire pressure sensor warnings - Enhanced cloud sign-in - Added ability to turn water pump off via cloud - Improved HVAC diagnostics 1.10.1 02/16/2020 Additional floor plans Improved leveling communication Cloud connection improvements 1.9 10/23/2019 Stability fixes. 1.0.1 09/26/2019
Previous Versions
Here you can find the changelog of JAYCOMMAND/TravelLINK since it was posted on our website on 2021-12-13 22:49:59.
The latest version is 3.18.2 and it was updated on 2026-06-12 08:06:44. See below the changes in each version.
JAYCOMMAND/TravelLINK version 3.18.2
Updated At: 2026-06-12
Changes: Version History - General enhancements
- Bug-fixes 3.18.2 08/11/2024 * Support for new RV models
* Other minor improvements 3.18.0 05/28/2024 * Support two solar controller instances for Chassis and House battery
* Allow the generator to continue running after ignition is turned off, if the generator was manually started. Applies to Motorhomes only.
* Increased upper limit of MIN voltage to 13.3V in Energy Center Settings (conditional)
* Support for new RV models
* Other minor improvements 3.16.0 04/15/2024 * Added extra temperature filtering to climate controls
* Support for battery-less Controller on older systems
* Support for new RV models
* Minor improvements for a better user experience 3.14.0 12/17/2023 * Introduce a 3 min re-start delay for climate controls to prevent short cycling
* Suppress water tank notification while travelling
* New on-screen notification for slideout door interlock
* Support for battery-less Controller
* Minor Quick Start guide improvements
* Generator lockout change for motorhomes to allow use of AGS while driving
* Automatically cancel motor lockout for motorhomes after driving
* Support for new RV models
* Minor bug fixes to ensure a more enjoyable travel experience 3.12.0 10/13/2023 * Added Quick Start – Camp set up and Pack Up sequence
* Added Bluetooth notifications for water tank levels
* Increased the maximum settable battery GOAL voltage in Energy Center Settings
* Miscellaneous updates to Solar Controller and Inverter
* Support for new RV models
* Minor bugfixes for selected models 3.11.0 07/11/2023 * Support for new RV models
* Minor changes and bugfixes for selected models 3.9.0 03/22/2023 * Support for new RV models 3.7.0 01/09/2023 * Minor bugfix for selected models 3.5.1 10/26/2022 * Expand TPMS pressure range and changes to kPa display resolution
* Support for new RV models 3.5.0 10/15/2022 HVAC and Inverter Diagnostics
New Floor Plans
Local Notification Improved
Node Reset 3.3.0 07/16/2022 * Ability to pair with additional Bluetooth wall switches
* Updated firmware
* New RV models
* Bug fixes & improvements. 3.1.0 12/18/2021 * Support for new RV models
* Support additional motors, Bluetooth extender
* Option to hide Bluetooth tire pressure and temperature sensors
* Firmware update
* Other minor enhancements. 2.6.0 09/28/2021 * Support for Highland Ridge and Starcraft RVs
* Detailed error notifications
* Support for 6-point hydraulic levelers
* Heat pump support available on the extended range of RVs
* Tredit Tire pressure monitoring (TPMS) integration
* Cloud login support now available on all models. 2.5.0 06/20/2021 Support for JayFeather - 1JM model added 2.3.1 03/23/2021 * Support RV-C compliant solar controllers, such as Go Power
* Auto-Generator-Start (AGS)
* Ability to turn on/off AC fan in Furnace Mode (applicable only to selected models)
* Support for tankless water heater (selected models only)
* Support for new RV models.
* New firmware updates
* Bug fixes and improvements 2.3.0 03/08/2021 - Generator control via cloud on some models (Note: Requires APP Version Number v2.1.2 or higher on the CONTROLLER in your RV)
- Support of a new RV model- Support of a new RV model 2.1.2 11/04/2020 Supporting additional RV models 2.1.1 09/30/2020 Supporting additional RV models
Improved “About” screen information
Bug fixes 2.1.0 08/25/2020 Fixed an issue with wireless temperature sensors 2.0.1 06/29/2020 Supporting additional RV models 2.0 06/02/2020 Bug fixes and improvements to cloud connectivity 1.10.3 04/07/2020 - Ability to integrate Bluetooth tire pressure, propane tank and temperature sensors to the system
- Increased settable HVAC range
- Added notifications for tire pressure sensor warnings
- Enhanced cloud sign-in
- Added ability to turn water pump off via cloud
- Improved HVAC diagnostics 1.10.1 02/16/2020 Additional floor plans
Improved leveling communication
Cloud connection improvements 1.9 10/23/2019 Stability fixes. 1.0.1 09/26/2019
JAYCOMMAND/TravelLINK version 3.18.2
Updated At: 2024-08-11
Changes: Aug 11, 2024
Version 3.18.2
- General enhancements
- Bug-fixes
JAYCOMMAND/TravelLINK version 3.18.2
Updated At: 2024-08-11
Changes: - General enhancements
- Bug-fixes
JAYCOMMAND/TravelLINK version 3.18.0
Updated At: 2024-05-28
Changes: May 28, 2024
Version 3.18.0
* Support for new RV models
* Other minor improvements
JAYCOMMAND/TravelLINK version 3.16.0
Updated At: 2024-04-15
Changes: Apr 15, 2024
Version 3.16.0
* Support two solar controller instances for Chassis and House battery
* Allow the generator to continue running after ignition is turned off, if the generator was manually started. Applies to Motorhomes only.
* Increased upper limit of MIN voltage to 13.3V in Energy Center Settings (conditional)
* Support for new RV models
* Other minor improvements
JAYCOMMAND/TravelLINK version 3.14.0
Updated At: 2023-12-17
Changes: Dec 17, 2023
Version 3.14.0
* Added extra temperature filtering to climate controls
* Support for battery-less Controller on older systems
* Support for new RV models
* Minor improvements for a better user experience
JAYCOMMAND/TravelLINK version 3.12.0
Updated At: 2023-10-13
Changes: Oct 13, 2023
Version 3.12.0
* Introduce a 3 min re-start delay for climate controls to prevent short cycling
* Suppress water tank notification while travelling
* New on-screen notification for slideout door interlock
* Support for battery-less Controller
* Minor Quick Start guide improvements
* Generator lockout change for motorhomes to allow use of AGS while driving
* Automatically cancel motor lockout for motorhomes after driving
* Support for new RV models
* Minor bug fixes to ensure a more enjoyable travel experience
JAYCOMMAND/TravelLINK version 3.11.0
Updated At: 2023-07-11
Changes: Jul 11, 2023
Version 3.11.0
* Added Quick Start – Camp set up and Pack Up sequence
* Added Bluetooth notifications for water tank levels
* Increased the maximum settable battery GOAL voltage in Energy Center Settings
* Miscellaneous updates to Solar Controller and Inverter
* Support for new RV models
* Minor bugfixes for selected models
JAYCOMMAND/TravelLINK version 3.9.0
Updated At: 2023-03-22
Changes: Mar 22, 2023
Version 3.9.0
* Support for new RV models
* Minor changes and bugfixes for selected models
JAYCOMMAND/TravelLINK version 3.3.0
Updated At: 2022-07-16
Changes: Jul 16, 2022 Version 3.3.0
HVAC and Inverter Diagnostics
New Floor Plans
Local Notification Improved
Node Reset
Disclaimer
Official App Store Link
We do not host JAYCOMMAND/TravelLINK on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for JAYCOMMAND/TravelLINK is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.