The in-lite system operates at 12 volts (low voltage). This means that the 230 volts of power from the socket is converted to 12 volts by a transformer. This is a safe voltage, making in-lite lighting easy to connect and reposition by the consumer.
The HUB-75 and SMART HUB-75 are the standard transformers in our range. Both transformers can handle 75 VA, distributed over two cable outputs. Note: only the SMART HUB-75 can be controlled via the in-lite App; on the HUB-75, the outputs cannot be switched independently.
More HUB-75The SMART HUB-150 is operated using the in-lite app. You can connect up to 150VA in fixtures to the transformer, divided over three cable outlets if desired, each of which can be operated separately.
More SMART HUB-150
HUB-75 and SMART HUB-75 are the standard transformers in our range. Both transformers can handle 75 VA, divided over two cable outputs. Note: only the SMART HUB-75 can be controlled via the in-lite App; on the HUB-75, the outputs cannot be switched independently.">More on HUB-75 & SMART HUB-75
The SMART HUB-150 is operated using the in-lite app. You can connect up to 150VA in fixtures to the transformer, divided over three cable outlets if desired, each of which can be operated separately.
More on SMART HUB-150| HUB-50 | HUB-100 | SMART HUB-150 | |
| Max. permitted voltage | 50 VA | 100 VA | 150 VA |
| Operation method | Touchscreen | Touchscreen | in-lite app |
| No. of ground cables (lines) | 2 lines | 2 lines | 3 lines |
| Separate line operation | × | × | √ |
| Manual on/off | √ | √ | √ (d.m.v. in-lite app) |
| Day/night switch | √ (light sensor) | √ (light sensor) | √ (astronomical clock) |
| Timer function | √ (hours on) | √ (hours on) | √ (minutes on) |
| Motion detector | MOVE (wired) | MOVE (wired) | SMART MOVE (wireless) |
| Overload short circuit notification | √ | √ | √ |
| Installation outdoor possible | √ at >50cm | √ at >50cm | √ at >50cm |
