About Home Moonshine
The calculator calculates: 1. Grain brags with saccharification of congestion by microbiological enzymes; 2. Automatically corrects the correction of the atmospheric pressure coefficient at the current moment; 3. Weighed...
The calculator calculates:
1. Grain brags with saccharification of congestion by microbiological enzymes;
2. Automatically corrects the correction of the atmospheric pressure coefficient at the current moment;
3. Weighed enzymes depending on the given activity.
4. Correction of distillate strength by temperature;
5. Current alcohol content in the cube and outlet of the distiller, as well as the current alcohol content in the cube, corrected for atmospheric pressure;
6. Content of absolute alcohol (AC) in fractions;
7. The number of selected "heads";
8. Mixing water of different temperatures;
9. Brags of fruits and molasses;
10. Mixing and diluting alcohol solutions with regard to contraction, with the possibility of calculating both volume and mass;
11. Sugars for a given number of ingredients, volume and spirituoznosti, as well as hydromodule;
12. The minimum amount of fertilizing, inverting sugar and a sample of fractional sugar;
13. Wort Measurement: Calculation of residual sugar content, alcohol content and percent digestion in °Brix, SG, %Sugar;
14. Conducts a laboratory log of fractional distillation with the calculation of the necessary parameters and the possibility of saving the results to a file.
Please note - the application uses special permissions in its work:
1. Geolocation - required to automatically determine the atmospheric pressure of your area (used in calculations with boiling point);
2. Memory access - required to save log files and backups.
All information requested by the application is located on your device and is not collected for any purpose in accordance with the Privacy Policy:
https://homesamogon.ru/policy-moonshine-calc-en/
Previous Versions
Here you can find the changelog of Home Moonshine since it was posted on our website on 2016-09-29 06:35:02.
The latest version is 12.10 and it was updated on 2026-06-10 23:00:21. See below the changes in each version.
Home Moonshine version 12.10
Updated At: 2025-12-23
Changes: Version 12.10
Added functionality of the extended version of the application;
Target SDK upgraded to 35
Version 9.17
Support for Arduino automation version 5;
Added the ability to manually enter coordinates for autocorrection of pressure;
Support for Arduino Automation version 4.9:
- Forced valve hold only in extreme positions, PWM is now adjustable in the range of 0.1%-99.9%;
- Increased the step of fine-tuning PWM to 2%;
- Fixed a bug with long switching at 0.1% delta;
Home Moonshine version 12.8
Updated At: 2025-01-24
Changes: Version 12.5
Added functionality of the extended version of the application;
Target SDK upgraded to 34
Version 9.17
Support for Arduino automation version 5;
Added the ability to manually enter coordinates for autocorrection of pressure;
Support for Arduino Automation version 4.9:
- Forced valve hold only in extreme positions, PWM is now adjustable in the range of 0.1%-99.9%;
- Increased the step of fine-tuning PWM to 2%;
- Fixed a bug with long switching at 0.1% delta;
Home Moonshine version 12.5
Updated At: 2024-08-15
Changes: Version 12.5
Added functionality of the extended version of the application;
Version 9.17
Support for Arduino automation version 5;
Added the ability to manually enter coordinates for autocorrection of pressure;
Support for Arduino Automation version 4.9:
- Forced valve hold only in extreme positions, PWM is now adjustable in the range of 0.1%-99.9%;
- Increased the step of fine-tuning PWM to 2%;
- Fixed a bug with long switching at 0.1% delta;
Home Moonshine version 12.0
Updated At: 2023-08-28
Changes: Version 12
Added functionality of the extended version of the application;
Version 9.17
Support for Arduino automation version 5;
Added the ability to manually enter coordinates for autocorrection of pressure;
Support for Arduino Automation version 4.9:
- Forced valve hold only in extreme positions, PWM is now adjustable in the range of 0.1%-99.9%;
- Increased the step of fine-tuning PWM to 2%;
- Fixed a bug with long switching at 0.1% delta;
Home Moonshine version 9.17
Updated At: 2023-05-15
Changes: Version 9.17
Support for Arduino automation version 5;
Added the ability to manually enter coordinates for autocorrection of pressure;
Support for Arduino Automation version 4.9:
- Forced valve hold only in extreme positions, PWM is now adjustable in the range of 0.1%-99.9%;
- Increased the step of fine-tuning PWM to 2%;
- Fixed a bug with long switching at 0.1% delta;
- The duration of the PWM period can now be set independently.
Version 9.15
Disabled ads;
Home Moonshine version 9.17
Updated At: 2023-03-29
Changes: Version 9.17
Added the ability to manually enter coordinates for autocorrection of pressure;
Support for Arduino Automation version 4.9:
- Forced valve hold only in extreme positions, PWM is now adjustable in the range of 0.1%-99.9%;
- Increased the step of fine-tuning PWM to 2%;
- Fixed a bug with long switching at 0.1% delta;
- The duration of the PWM period can now be set independently.
Version 9.15
Disabled ads;
Support for Arduino-Automation firmware version 4.8;
Home Moonshine version 9.8
Updated At: 2021-06-21
Changes: Version 9.7
- To install localization, access to the file system is no longer required;
Version 9.5 (global update)
- Added support for Polish, Turkish and Czech languages;
- The interface was rewritten again;
- Permissions are now requested as needed;
- It is possible to indicate the location on the map yourself;
- Reference values do not need to be saved, they are loaded automatically;
- Automation displays the current alcoholic cube;
- The list of external devices has been expanded;
Home Moonshine version 9.5
Updated At: 2021-04-19
Changes: Version 9.5 (global update)
- Added support for Polish, Turkish and Czech languages;
- The interface was rewritten again;
- Permissions are now requested as needed;
- It is possible to indicate the location on the map yourself;
- Reference values do not need to be saved, they are loaded automatically;
- Automation displays the current alcoholic cube;
- The list of external devices has been expanded;
- Support for smart home IoT systems;
- and much more;
Home Moonshine version 8.5
Updated At: 2020-10-24
Changes: - Fixed error displaying automation "true";
- Calculation of the replacement of sugar with glucose;
- Added support for the built-in barometer;
- Updated menu in Ukrainian and English localizations;
- Added support for the Ukrainian language;
- Fixed error receiving weather data;
- API level raised to 28;
- Localization;
- Fixed startup errors;
- Updated display of drop-down menus;
- Fixed "Application Stop" bug;
- Added support for the Czech language;
- Fixed Android 8 bug;
Home Moonshine version 8.4
Updated At: 2020-04-06
Changes: - Calculation of the replacement of sugar with glucose;
- Added support for the built-in barometer;
- Updated menu in Ukrainian and English localizations;
- Added support for the Ukrainian language;
- Fixed error receiving weather data;
- API level raised to 28;
- Localization;
- Fixed startup errors;
- Updated display of drop-down menus;
- Fixed "Application Stop" bug;
- Added support for the Czech language;
- Fixed Android 8 bug;
- Full update functionality Arduino-Automation;
Disclaimer
Official Google Play Link
We do not host Home Moonshine on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Google and passed their terms and conditions to be listed there. We recommend caution when installing it.
The Google Play link for Home Moonshine is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
