About GV-Eye
GV-Eye is a free remote view application, you can connect to GeoVision IP devices and software from your iOS mobile devices to remotely watch live view, play back recordings, trigger outputs, take snapshots and more. For...
GV-Eye is a free remote view application, you can connect to GeoVision IP devices and software from your iOS mobile devices to remotely watch live view, play back recordings, trigger outputs, take snapshots and more. For questions or suggestions, contact GeoVision Support at
[email protected] Features - QR code scan for connecting to GeoVision software and IP devices (Paid Service) - MJPEG, H.264, H.265 codec at up to 4000 x 3000 resolution - Live display of multiple channels - Enable recording to the connected IP devices and software - Address book to save connection info for quick and direct access - Two-way audio - Video playback - PTZ controls such as presets, focus, zoom and speed- Force output devices to send alarms- Camera list share via QR code- 360 degree mode and VR mode supported for GV-VR360 - Fisheye dewarping for GeoVision fisheye cameras - Edge management for configuring IP address, device names and assigning storage paths
Version History New: - Support for push notifications from GV-VMS V20.1 or later Modified: - Improved connection speed and playback performance when connecting to GV-VMS V20.0.1 or later - Improved connection speed when accessing live view and playback via RTSP from GV-IP cameras 3.6.0 6d ago Fixed: - Issue of GV-Eye becoming unresponsive in General Mode if a camera name obtained through GV-Authentication Server contains full-width special characters - Inability to retrieve playback in Easy Mode and General Mode when connected to GV-VMS V17.4.5 or earlier Modified: - Channels in the camera list retrieved from GV-Authentication Server in General Mode now displayed based on GV-Authentication Server user permissions - Auto Add to Live View function in General Mode now applicable to camera lists retrieved from GV-Authentication Server - Number of supported Live View pages in General Mode increased from 6 to 20, increasing the maximum supported camera channels from 96 to 320 3.5.1 11/20/2025 New: - Support for new GV-IP Cameras: GV-TMS8800 / TMS20811 - Support for new GV-SNVR: GV-TNVR1620-P / TXVL1610 Fixed: - Issue of abnormal time display in live view for GV-R Series IP Cameras in Easy Mode - Chances of intermittent audio during playback for GV-R Series IP Cameras in Easy Mode and General Mode - Inability to control outputs from more than one GV-VMS I/O device in Easy Mode (requires GV-VMS V17.4.8 / V18.3.5 with patch V17.4.8.48 / V18.3.5.19, or later versions) Modified: - GV-VMS playback retrieval speed in Easy Mode optimized (requires GV-VMS V17.4.8 / V18.3.5 with patch V17.4.8.48 / V18.3.5.19, or later versions) 3.5.0 09/26/2025 Fixed: - Issue with playback (RPB) layout after re-entering from the live view - Issue with the Group editing page - Issue with the created Favorite lists exceeding the number of hosts Modified: - Connection speed with GV-VMS optimized (requires GV-VMS V17.4.8 / V18.3.5 with patch V17.4.8.32 / V18.3.5.9 or later versions) 3.4.1 03/06/2025 New: - Support for changing the device name in Easy Mode - Addition of confirmation prompts to (1) switch to Easy Mode and (2) sync data to Easy Mode for General Mode users upon upgrading GV-Eye Fixed: - Lack of prompt when the maximum number of GV-Eye connections to GV-SNVR is reached in Easy Mode - Issue in Easy Mode where the host IP address overlaps with the expand button in the Add Favorite function - Issue in Easy Mode where users connecting to devices by manually entering a domain name are mistakenly identified as using the GV-Relay QR code, leading to an incorrect prompt to bind their email account 3.4.0 01/02/2025 Fixed - Issue with app failure when tapping on the Add sign (+) of the live view layout in General Mode, with iOS 18 - Issue with app failure when tapping Group Management in General Mode, with iOS 18 Modified - Removal of the method of manually reloading hosts after upgrading to version 3.3.0 - General Mode will not be switched to Easy Mode after app upgrade 3.3.1 09/27/2024 New: Support for timeline playback in Easy Mode (A patch required for GV-Recording Server） Support for the Favorite function in Easy Mode Support for PTZ control for GV-SNVR3203 / 6403 Fixed: Audio failure for all GV-VMS channels if channel 1 is disabled or disconnected Issue of misplaced Group sequence after exporting/importing the camera list in General Mode Connection failure for GV-SNVR3203 / 6403 when the web port is not 80 3.3.0 09/18/2024 New: - Support for the following new GV-IP devices: o GV-EBDP5800 o GV-GBL4900 / 4911 o GV-GDR4900 o GV-GEB4900 o GV-GEBF4911 o GV-GVD4910 o GV-PFER12800 o GV-RBL5800 / 5811 o GV-REB5800 o GV-RNVR256G0-N o GV-TBL4807 o GV-TBLP5800 Fixed: - Issue of app not responding in General Mode in a narrowband environment - Issues of Audio Talkback - Failure to load relay data quota after purchase 3.2.0 03/26/2024 Fixed: - Failure to access playback recordings in DST time zones - System failure when switching between single view and multi-view with iOS 17 3.1.1 11/27/2023 New: - Support for H.265 hardware decoding in General Mode - Support for H.264 / H.265 hardware decoding in Easy Mode - Support for hardware decoding (enabled by default) for single view in Easy Mode Fixed: - Issue of camera image glitch when hardware decoding is enabled in General Mode Modified: - Hardware decoding enabled by default for single view in General Mode 3.1.0 08/28/2023 Failure to play back recordings for the last hour from UA-SNVR and UA-HD DVR hosts in the DST time zone 3.0.2 03/28/2023 Fixed: - Issue of app not responding when adjusting the playback speed - Chances of image not displaying after repeatedly switching between multi and single views, for images from UA DVR series - Issue of displaying the login interface only in Chinese when searching devices under the same LAN in EZ Mode - Failure to connect to UA-HD DVR using certain IP address combinations Improved: - Supported Device List updated 3.0.1 03/12/2023 New: - Support for GV-SNVR models: GV-SNVR3203 / GV-SNVR6403 - Support for UA-HD DVR model: UA-XVR1620 - Support for Easy Mode for a quick access to the real-time images of all channels for individual hosts Fixed: - Microphone function failure for the following IP camera models (RTSP Authentication required to be set to “Basic” on the camera’s Web interface): o GV-ABL / TBL Series o GV-ADR / TDR Series o GV-AVD / TVD Series o GV-BLFC5800 o GV-EBD Series o GV-EBFC5800 o GV-FER5702 o GV-PTZ5810-IR o GV-TFD Series o GV-SD2322-IR / 2722-IR / 3732-IR / 4825-IR / 4834-IR - Connection failure due to missing host information using GV-relay QR code - Issue of live view disconnection option (trash can icon) misplaced for multiple divisions Improved: - Support for H.265 playback export - Append and Replace options added for camera list import 3.0.0 12/18/2022 - Image issue in live view and playback on iOS 16.1 - Chances of App failure occurred when clicking the Microphone button on iOS 16.0 2.9.2 10/26/2022 Fixed: - Noise issue when connecting to UA-XVL810, UA-XVL1610, UA-XVR810 - Audio not functional when connecting to UA-SNVRL810-P, UA-SNVR1620-P - Chances of app error when switching between multi views and single view from GV-NVR - Distorted live images with a resolution of 640 x 480 or less - App error when connecting to GV-VR360 with single stream set 2.9.1 07/26/2022 New: - Support for IP camera models: UA-R500F2, UA-R560F2, UA-R580F2, UA-B580F3, UA-R800F2 - Support for standalone NVR models: UA-SNVRL810-P, UA-SNVR1620-P - Support for HD DVR models: UA-XVL810, UA-XVL1610, UA-XVR810 2.9.0 06/10/2022 32-bit library removed 2.8.2 03/25/2022 Fixed: - Failure of remote playback from GV-SNVR - Failure of remote playback from GV-VMS when connecting through the Internet - Failure of accessing playback videos stored in the SD cards of GV-IP cameras 2.8.1 03/18/2022 new: - Support for GV-Authentication Server connection for the access to GV-IP devices from multiple GV-VMS or GV-DVR / NVR systems - Support for a maximum of 300 groups 2.8.0 03/09/2022 New: - Support for MP3 audio codec Modified: - The step of clicking “Update” required now, before saving the connection information of a camera - Camera list of GV-Recording Server to be updated according to the privilege of the login account Fixed: - Failure to control PTZ when connected with a domain name - Failure of the Search Host function using WiFi when upgraded to iOS 14.5 or later 2.7.6 09/15/2021 *Important Notice* 1. Before upgrading to GV-Eye V2.7.5, make sure GV-VMS you are using is V18.2.0 (coming soon) or V17.4.0, and GV-DVR / NVR is V8.9.0. 2. The software version earlier than the listed versions requires a patch file to work with GV-Eye V2.7.5. Pls. check the patch download from App description. New: - Prompted display of the supported versions of GV-Software and GV-IP device upon opening the App Improved: - Connection time improved for GV-DVR / NVR / VMS Fixed: - Chances of system error upon manually assigning connected GV-IP devices on the Add Device page, if users did not tap “Get Information” during configuration - Chances of failure to play back recordings from certain connected GV-Video Server or GV-IP cameras Changed: - Audio codec changed to PCM Modified: - Copyright notices accessible on the App interface 2.7.5 10/26/2020 New: - Support for GV-Recording Server V2.0 with 256 cameras- Support for GV-QSD5730 and GV-QSD5731-IR Improved: - Connection time improved for GV-ABL / ADR / AVD / EBD / TBL / TDR / TVD series Fixed: - Chances of system error when configuring Group Management through Settings - Chances of failure to synchronize the order of preset points to as configured on the Web interface of the connected camera - Chances of connection errors when the domain name of the connected camera exceeds 24 characters 2.7.4 06/23/2020 New: - Two-way audio support for the following models: GV-SNVR0412 V1.01 or later GV-SNVR0812 V1.06 or later GV-SNVR1611 V3.06 or later Changed: - The one-touch switch for Output under I/O option replaced with ON and OFF selections Fixed: - Inaccurate displays in Japanese - Inability to connect to GV-FD8700-FR / GV-VD8700 / GV-VR360 through the Internet 2.7.3 12/05/2019 Fixed: - Failure to access live images from connected GV-VR360 - Chances of inability to access live images and retrieve recordings from GV-VMS V17.2.1 2.7.2 08/28/2019 Changed: - Price of GV-Relay data adjusted to $1.99 per 10 GB (GV-Relay is a paid service, starting from V2.7.0, for connecting to GV-VMS V18.1, GV-DVR/NVR V8.8.0, GV-Recording Server/Video Gateway V2.0.0 and GV-SNVR via QR-code scan) - Increasing free monthly data quota to 10 GB per GV-Relay Fixed: - Inability for the second GV-Eye, and onward, to use two-way audio for certain IP cameras when two or more GV-Eye is simultaneously connected to the same camera 2.7.1 06/04/2019
Previous Versions
Here you can find the changelog of GV-Eye since it was posted on our website on 2016-09-25 02:14:36.
The latest version is 3.6.0 and it was updated on 2026-06-11 05:51:11. See below the changes in each version.
GV-Eye version 3.6.0
Updated At: 2026-06-11
Changes: Version History New:
- Support for push notifications from GV-VMS V20.1 or later
Modified:
- Improved connection speed and playback performance when connecting to GV-VMS V20.0.1 or later
- Improved connection speed when accessing live view and playback via RTSP from GV-IP cameras 3.6.0 6d ago Fixed:
- Issue of GV-Eye becoming unresponsive in General Mode if a camera name obtained through GV-Authentication Server contains full-width special characters
- Inability to retrieve playback in Easy Mode and General Mode when connected to GV-VMS V17.4.5 or earlier
Modified:
- Channels in the camera list retrieved from GV-Authentication Server in General Mode now displayed based on GV-Authentication Server user permissions
- Auto Add to Live View function in General Mode now applicable to camera lists retrieved from GV-Authentication Server
- Number of supported Live View pages in General Mode increased from 6 to 20, increasing the maximum supported camera channels from 96 to 320 3.5.1 11/20/2025 New:
- Support for new GV-IP Cameras: GV-TMS8800 / TMS20811
- Support for new GV-SNVR: GV-TNVR1620-P / TXVL1610
Fixed:
- Issue of abnormal time display in live view for GV-R Series IP Cameras in Easy Mode
- Chances of intermittent audio during playback for GV-R Series IP Cameras in Easy Mode and General Mode
- Inability to control outputs from more than one GV-VMS I/O device in Easy Mode (requires GV-VMS V17.4.8 / V18.3.5 with patch V17.4.8.48 / V18.3.5.19, or later versions)
Modified:
- GV-VMS playback retrieval speed in Easy Mode optimized (requires GV-VMS V17.4.8 / V18.3.5 with patch V17.4.8.48 / V18.3.5.19, or later versions) 3.5.0 09/26/2025 Fixed:
- Issue with playback (RPB) layout after re-entering from the live view
- Issue with the Group editing page
- Issue with the created Favorite lists exceeding the number of hosts
Modified:
- Connection speed with GV-VMS optimized (requires GV-VMS V17.4.8 / V18.3.5 with patch V17.4.8.32 / V18.3.5.9 or later versions) 3.4.1 03/06/2025 New:
- Support for changing the device name in Easy Mode
- Addition of confirmation prompts to (1) switch to Easy Mode and (2) sync data to Easy Mode for General Mode users upon upgrading GV-Eye
Fixed:
- Lack of prompt when the maximum number of GV-Eye connections to GV-SNVR is reached in Easy Mode
- Issue in Easy Mode where the host IP address overlaps with the expand button in the Add Favorite function
- Issue in Easy Mode where users connecting to devices by manually entering a domain name are mistakenly identified as using the GV-Relay QR code, leading to an incorrect prompt to bind their email account 3.4.0 01/02/2025 Fixed
- Issue with app failure when tapping on the Add sign (+) of the live view layout in General Mode, with iOS 18
- Issue with app failure when tapping Group Management in General Mode, with iOS 18
Modified
- Removal of the method of manually reloading hosts after upgrading to version 3.3.0
- General Mode will not be switched to Easy Mode after app upgrade 3.3.1 09/27/2024 New:
Support for timeline playback in Easy Mode (A patch required for GV-Recording Server）
Support for the Favorite function in Easy Mode
Support for PTZ control for GV-SNVR3203 / 6403
Fixed:
Audio failure for all GV-VMS channels if channel 1 is disabled or disconnected
Issue of misplaced Group sequence after exporting/importing the camera list in General Mode
Connection failure for GV-SNVR3203 / 6403 when the web port is not 80 3.3.0 09/18/2024 New:
- Support for the following new GV-IP devices:
o GV-EBDP5800
o GV-GBL4900 / 4911
o GV-GDR4900
o GV-GEB4900
o GV-GEBF4911
o GV-GVD4910
o GV-PFER12800
o GV-RBL5800 / 5811
o GV-REB5800
o GV-RNVR256G0-N
o GV-TBL4807
o GV-TBLP5800
Fixed:
- Issue of app not responding in General Mode in a narrowband environment
- Issues of Audio Talkback
- Failure to load relay data quota after purchase 3.2.0 03/26/2024 Fixed:
- Failure to access playback recordings in DST time zones
- System failure when switching between single view and multi-view with iOS 17 3.1.1 11/27/2023 New:
- Support for H.265 hardware decoding in General Mode
- Support for H.264 / H.265 hardware decoding in Easy Mode
- Support for hardware decoding (enabled by default) for single view in Easy Mode
Fixed:
- Issue of camera image glitch when hardware decoding is enabled in General Mode
Modified:
- Hardware decoding enabled by default for single view in General Mode 3.1.0 08/28/2023 Failure to play back recordings for the last hour from UA-SNVR and UA-HD DVR hosts in the DST time zone 3.0.2 03/28/2023 Fixed:
- Issue of app not responding when adjusting the playback speed
- Chances of image not displaying after repeatedly switching between multi and single views, for images from UA DVR series
- Issue of displaying the login interface only in Chinese when searching devices under the same LAN in EZ Mode
- Failure to connect to UA-HD DVR using certain IP address combinations
Improved:
- Supported Device List updated 3.0.1 03/12/2023 New:
- Support for GV-SNVR models: GV-SNVR3203 / GV-SNVR6403
- Support for UA-HD DVR model: UA-XVR1620
- Support for Easy Mode for a quick access to the real-time images of all channels for individual hosts
Fixed:
- Microphone function failure for the following IP camera models (RTSP Authentication required to be set to “Basic” on the camera’s Web interface):
o GV-ABL / TBL Series
o GV-ADR / TDR Series
o GV-AVD / TVD Series
o GV-BLFC5800
o GV-EBD Series
o GV-EBFC5800
o GV-FER5702
o GV-PTZ5810-IR
o GV-TFD Series
o GV-SD2322-IR / 2722-IR / 3732-IR / 4825-IR / 4834-IR
- Connection failure due to missing host information using GV-relay QR code
- Issue of live view disconnection option (trash can icon) misplaced for multiple divisions
Improved:
- Support for H.265 playback export
- Append and Replace options added for camera list import 3.0.0 12/18/2022 - Image issue in live view and playback on iOS 16.1
- Chances of App failure occurred when clicking the Microphone button on iOS 16.0 2.9.2 10/26/2022 Fixed:
- Noise issue when connecting to UA-XVL810, UA-XVL1610, UA-XVR810
- Audio not functional when connecting to UA-SNVRL810-P, UA-SNVR1620-P
- Chances of app error when switching between multi views and single view from GV-NVR
- Distorted live images with a resolution of 640 x 480 or less
- App error when connecting to GV-VR360 with single stream set 2.9.1 07/26/2022 New:
- Support for IP camera models: UA-R500F2, UA-R560F2, UA-R580F2, UA-B580F3, UA-R800F2
- Support for standalone NVR models: UA-SNVRL810-P, UA-SNVR1620-P
- Support for HD DVR models: UA-XVL810, UA-XVL1610, UA-XVR810 2.9.0 06/10/2022 32-bit library removed 2.8.2 03/25/2022 Fixed:
- Failure of remote playback from GV-SNVR
- Failure of remote playback from GV-VMS when connecting through the Internet
- Failure of accessing playback videos stored in the SD cards of GV-IP cameras 2.8.1 03/18/2022 new:
- Support for GV-Authentication Server connection for the access to GV-IP devices from multiple GV-VMS or GV-DVR / NVR systems
- Support for a maximum of 300 groups 2.8.0 03/09/2022 New:
- Support for MP3 audio codec
Modified:
- The step of clicking “Update” required now, before saving the connection information of a camera
- Camera list of GV-Recording Server to be updated according to the privilege of the login account
Fixed:
- Failure to control PTZ when connected with a domain name
- Failure of the Search Host function using WiFi when upgraded to iOS 14.5 or later 2.7.6 09/15/2021 *Important Notice*
1. Before upgrading to GV-Eye V2.7.5, make sure GV-VMS you are using is V18.2.0 (coming soon) or V17.4.0, and GV-DVR / NVR is V8.9.0.
2. The software version earlier than the listed versions requires a patch file to work with GV-Eye V2.7.5. Pls. check the patch download from App description.
New:
- Prompted display of the supported versions of GV-Software and GV-IP device upon opening the App
Improved:
- Connection time improved for GV-DVR / NVR / VMS
Fixed:
- Chances of system error upon manually assigning connected GV-IP devices on the Add Device page, if users did not tap “Get Information” during configuration
- Chances of failure to play back recordings from certain connected GV-Video Server or GV-IP cameras
Changed:
- Audio codec changed to PCM
Modified:
- Copyright notices accessible on the App interface 2.7.5 10/26/2020 New:
- Support for GV-Recording Server V2.0 with 256 cameras- Support for GV-QSD5730 and GV-QSD5731-IR
Improved:
- Connection time improved for GV-ABL / ADR / AVD / EBD / TBL / TDR / TVD series
Fixed:
- Chances of system error when configuring Group Management through Settings
- Chances of failure to synchronize the order of preset points to as configured on the Web interface of the connected camera
- Chances of connection errors when the domain name of the connected camera exceeds 24 characters 2.7.4 06/23/2020 New:
- Two-way audio support for the following models:
GV-SNVR0412 V1.01 or later
GV-SNVR0812 V1.06 or later
GV-SNVR1611 V3.06 or later
Changed:
- The one-touch switch for Output under I/O option replaced with ON and OFF selections
Fixed:
- Inaccurate displays in Japanese
- Inability to connect to GV-FD8700-FR / GV-VD8700 / GV-VR360 through the Internet 2.7.3 12/05/2019 Fixed:
- Failure to access live images from connected GV-VR360
- Chances of inability to access live images and retrieve recordings from GV-VMS V17.2.1 2.7.2 08/28/2019 Changed:
- Price of GV-Relay data adjusted to $1.99 per 10 GB (GV-Relay is a paid service, starting from V2.7.0, for connecting to GV-VMS V18.1, GV-DVR/NVR V8.8.0, GV-Recording Server/Video Gateway V2.0.0 and GV-SNVR via QR-code scan)
- Increasing free monthly data quota to 10 GB per GV-Relay
Fixed:
- Inability for the second GV-Eye, and onward, to use two-way audio for certain IP cameras when two or more GV-Eye is simultaneously connected to the same camera 2.7.1 06/04/2019
GV-Eye version 3.5.1
Updated At: 2026-05-08
Changes: Version History Fixed:
- Issue of GV-Eye becoming unresponsive in General Mode if a camera name obtained through GV-Authentication Server contains full-width special characters
- Inability to retrieve playback in Easy Mode and General Mode when connected to GV-VMS V17.4.5 or earlier
Modified:
- Channels in the camera list retrieved from GV-Authentication Server in General Mode now displayed based on GV-Authentication Server user permissions
- Auto Add to Live View function in General Mode now applicable to camera lists retrieved from GV-Authentication Server
- Number of supported Live View pages in General Mode increased from 6 to 20, increasing the maximum supported camera channels from 96 to 320 3.5.1 11/20/2025 New:
- Support for new GV-IP Cameras: GV-TMS8800 / TMS20811
- Support for new GV-SNVR: GV-TNVR1620-P / TXVL1610
Fixed:
- Issue of abnormal time display in live view for GV-R Series IP Cameras in Easy Mode
- Chances of intermittent audio during playback for GV-R Series IP Cameras in Easy Mode and General Mode
- Inability to control outputs from more than one GV-VMS I/O device in Easy Mode (requires GV-VMS V17.4.8 / V18.3.5 with patch V17.4.8.48 / V18.3.5.19, or later versions)
Modified:
- GV-VMS playback retrieval speed in Easy Mode optimized (requires GV-VMS V17.4.8 / V18.3.5 with patch V17.4.8.48 / V18.3.5.19, or later versions) 3.5.0 09/26/2025 Fixed:
- Issue with playback (RPB) layout after re-entering from the live view
- Issue with the Group editing page
- Issue with the created Favorite lists exceeding the number of hosts
Modified:
- Connection speed with GV-VMS optimized (requires GV-VMS V17.4.8 / V18.3.5 with patch V17.4.8.32 / V18.3.5.9 or later versions) 3.4.1 03/06/2025 New:
- Support for changing the device name in Easy Mode
- Addition of confirmation prompts to (1) switch to Easy Mode and (2) sync data to Easy Mode for General Mode users upon upgrading GV-Eye
Fixed:
- Lack of prompt when the maximum number of GV-Eye connections to GV-SNVR is reached in Easy Mode
- Issue in Easy Mode where the host IP address overlaps with the expand button in the Add Favorite function
- Issue in Easy Mode where users connecting to devices by manually entering a domain name are mistakenly identified as using the GV-Relay QR code, leading to an incorrect prompt to bind their email account 3.4.0 01/02/2025 Fixed
- Issue with app failure when tapping on the Add sign (+) of the live view layout in General Mode, with iOS 18
- Issue with app failure when tapping Group Management in General Mode, with iOS 18
Modified
- Removal of the method of manually reloading hosts after upgrading to version 3.3.0
- General Mode will not be switched to Easy Mode after app upgrade 3.3.1 09/27/2024 New:
Support for timeline playback in Easy Mode (A patch required for GV-Recording Server）
Support for the Favorite function in Easy Mode
Support for PTZ control for GV-SNVR3203 / 6403
Fixed:
Audio failure for all GV-VMS channels if channel 1 is disabled or disconnected
Issue of misplaced Group sequence after exporting/importing the camera list in General Mode
Connection failure for GV-SNVR3203 / 6403 when the web port is not 80 3.3.0 09/18/2024 New:
- Support for the following new GV-IP devices:
o GV-EBDP5800
o GV-GBL4900 / 4911
o GV-GDR4900
o GV-GEB4900
o GV-GEBF4911
o GV-GVD4910
o GV-PFER12800
o GV-RBL5800 / 5811
o GV-REB5800
o GV-RNVR256G0-N
o GV-TBL4807
o GV-TBLP5800
Fixed:
- Issue of app not responding in General Mode in a narrowband environment
- Issues of Audio Talkback
- Failure to load relay data quota after purchase 3.2.0 03/26/2024 Fixed:
- Failure to access playback recordings in DST time zones
- System failure when switching between single view and multi-view with iOS 17 3.1.1 11/27/2023 New:
- Support for H.265 hardware decoding in General Mode
- Support for H.264 / H.265 hardware decoding in Easy Mode
- Support for hardware decoding (enabled by default) for single view in Easy Mode
Fixed:
- Issue of camera image glitch when hardware decoding is enabled in General Mode
Modified:
- Hardware decoding enabled by default for single view in General Mode 3.1.0 08/28/2023 Failure to play back recordings for the last hour from UA-SNVR and UA-HD DVR hosts in the DST time zone 3.0.2 03/28/2023 Fixed:
- Issue of app not responding when adjusting the playback speed
- Chances of image not displaying after repeatedly switching between multi and single views, for images from UA DVR series
- Issue of displaying the login interface only in Chinese when searching devices under the same LAN in EZ Mode
- Failure to connect to UA-HD DVR using certain IP address combinations
Improved:
- Supported Device List updated 3.0.1 03/12/2023 New:
- Support for GV-SNVR models: GV-SNVR3203 / GV-SNVR6403
- Support for UA-HD DVR model: UA-XVR1620
- Support for Easy Mode for a quick access to the real-time images of all channels for individual hosts
Fixed:
- Microphone function failure for the following IP camera models (RTSP Authentication required to be set to “Basic” on the camera’s Web interface):
o GV-ABL / TBL Series
o GV-ADR / TDR Series
o GV-AVD / TVD Series
o GV-BLFC5800
o GV-EBD Series
o GV-EBFC5800
o GV-FER5702
o GV-PTZ5810-IR
o GV-TFD Series
o GV-SD2322-IR / 2722-IR / 3732-IR / 4825-IR / 4834-IR
- Connection failure due to missing host information using GV-relay QR code
- Issue of live view disconnection option (trash can icon) misplaced for multiple divisions
Improved:
- Support for H.265 playback export
- Append and Replace options added for camera list import 3.0.0 12/18/2022 - Image issue in live view and playback on iOS 16.1
- Chances of App failure occurred when clicking the Microphone button on iOS 16.0 2.9.2 10/26/2022 Fixed:
- Noise issue when connecting to UA-XVL810, UA-XVL1610, UA-XVR810
- Audio not functional when connecting to UA-SNVRL810-P, UA-SNVR1620-P
- Chances of app error when switching between multi views and single view from GV-NVR
- Distorted live images with a resolution of 640 x 480 or less
- App error when connecting to GV-VR360 with single stream set 2.9.1 07/26/2022 New:
- Support for IP camera models: UA-R500F2, UA-R560F2, UA-R580F2, UA-B580F3, UA-R800F2
- Support for standalone NVR models: UA-SNVRL810-P, UA-SNVR1620-P
- Support for HD DVR models: UA-XVL810, UA-XVL1610, UA-XVR810 2.9.0 06/10/2022 32-bit library removed 2.8.2 03/25/2022 Fixed:
- Failure of remote playback from GV-SNVR
- Failure of remote playback from GV-VMS when connecting through the Internet
- Failure of accessing playback videos stored in the SD cards of GV-IP cameras 2.8.1 03/18/2022 new:
- Support for GV-Authentication Server connection for the access to GV-IP devices from multiple GV-VMS or GV-DVR / NVR systems
- Support for a maximum of 300 groups 2.8.0 03/09/2022 New:
- Support for MP3 audio codec
Modified:
- The step of clicking “Update” required now, before saving the connection information of a camera
- Camera list of GV-Recording Server to be updated according to the privilege of the login account
Fixed:
- Failure to control PTZ when connected with a domain name
- Failure of the Search Host function using WiFi when upgraded to iOS 14.5 or later 2.7.6 09/15/2021 *Important Notice*
1. Before upgrading to GV-Eye V2.7.5, make sure GV-VMS you are using is V18.2.0 (coming soon) or V17.4.0, and GV-DVR / NVR is V8.9.0.
2. The software version earlier than the listed versions requires a patch file to work with GV-Eye V2.7.5. Pls. check the patch download from App description.
New:
- Prompted display of the supported versions of GV-Software and GV-IP device upon opening the App
Improved:
- Connection time improved for GV-DVR / NVR / VMS
Fixed:
- Chances of system error upon manually assigning connected GV-IP devices on the Add Device page, if users did not tap “Get Information” during configuration
- Chances of failure to play back recordings from certain connected GV-Video Server or GV-IP cameras
Changed:
- Audio codec changed to PCM
Modified:
- Copyright notices accessible on the App interface 2.7.5 10/26/2020 New:
- Support for GV-Recording Server V2.0 with 256 cameras- Support for GV-QSD5730 and GV-QSD5731-IR
Improved:
- Connection time improved for GV-ABL / ADR / AVD / EBD / TBL / TDR / TVD series
Fixed:
- Chances of system error when configuring Group Management through Settings
- Chances of failure to synchronize the order of preset points to as configured on the Web interface of the connected camera
- Chances of connection errors when the domain name of the connected camera exceeds 24 characters 2.7.4 06/23/2020 New:
- Two-way audio support for the following models:
GV-SNVR0412 V1.01 or later
GV-SNVR0812 V1.06 or later
GV-SNVR1611 V3.06 or later
Changed:
- The one-touch switch for Output under I/O option replaced with ON and OFF selections
Fixed:
- Inaccurate displays in Japanese
- Inability to connect to GV-FD8700-FR / GV-VD8700 / GV-VR360 through the Internet 2.7.3 12/05/2019 Fixed:
- Failure to access live images from connected GV-VR360
- Chances of inability to access live images and retrieve recordings from GV-VMS V17.2.1 2.7.2 08/28/2019 Changed:
- Price of GV-Relay data adjusted to $1.99 per 10 GB (GV-Relay is a paid service, starting from V2.7.0, for connecting to GV-VMS V18.1, GV-DVR/NVR V8.8.0, GV-Recording Server/Video Gateway V2.0.0 and GV-SNVR via QR-code scan)
- Increasing free monthly data quota to 10 GB per GV-Relay
Fixed:
- Inability for the second GV-Eye, and onward, to use two-way audio for certain IP cameras when two or more GV-Eye is simultaneously connected to the same camera 2.7.1 06/04/2019 Support for connecting to GV-VMS (18.1), GV-DVR/NVR (V8.8.0) and GV-Recording Server/Video Gateway (V2.0.0) via GV-Relay QR-code scan 2.7.0 05/13/2019
GV-Eye version 3.5.1
Updated At: 2025-11-20
Changes: Fixed:
- Issue of GV-Eye becoming unresponsive in General Mode if a camera name obtained through GV-Authentication Server contains full-width special characters
- Inability to retrieve playback in Easy Mode and General Mode when connected to GV-VMS V17.4.5 or earlier
Modified:
- Channels in the camera list retrieved from GV-Authentication Server in General Mode now displayed based on GV-Authentication Server user permissions
- Auto Add to Live View function in General Mode now applicable to camera lists retrieved from GV-Authentication Server
- Number of supported Live View pages in General Mode increased from 6 to 20, increasing the maximum supported camera channels from 96 to 320
GV-Eye version 3.4.1
Updated At: 2025-03-06
Changes: Mar 6, 2025
Version 3.4.1
Fixed:
- Issue with playback (RPB) layout after re-entering from the live view
- Issue with the Group editing page
- Issue with the created Favorite lists exceeding the number of hosts
Modified:
- Connection speed with GV-VMS optimized (requires GV-VMS V17.4.8 / V18.3.5 with patch V17.4.8.32 / V18.3.5.9 or later versions)
GV-Eye version 3.4.0
Updated At: 2025-01-02
Changes: Jan 2, 2025
Version 3.4.0
New:
- Support for changing the device name in Easy Mode
- Addition of confirmation prompts to (1) switch to Easy Mode and (2) sync data to Easy Mode for General Mode users upon upgrading GV-Eye
Fixed:
- Lack of prompt when the maximum number of GV-Eye connections to GV-SNVR is reached in Easy Mode
- Issue in Easy Mode where the host IP address overlaps with the expand button in the Add Favorite function
- Issue in Easy Mode where users connecting to devices by manually entering a domain name are mistakenly identified as using the GV-Relay QR code, leading to an incorrect prompt to bind their email account
GV-Eye version 3.3.1
Updated At: 2024-09-27
Changes: Sep 27, 2024
Version 3.3.1
Fixed
- Issue with app failure when tapping on the Add sign (+) of the live view layout in General Mode, with iOS 18
- Issue with app failure when tapping Group Management in General Mode, with iOS 18
Modified
- Removal of the method of manually reloading hosts after upgrading to version 3.3.0
- General Mode will not be switched to Easy Mode after app upgrade
GV-Eye version 3.2.0
Updated At: 2024-03-26
Changes: Mar 26, 2024
Version 3.2.0
New:
- Support for the following new GV-IP devices:
o GV-EBDP5800
o GV-GBL4900 / 4911
o GV-GDR4900
o GV-GEB4900
o GV-GEBF4911
o GV-GVD4910
o GV-PFER12800
o GV-RBL5800 / 5811
o GV-REB5800
o GV-RNVR256G0-N
o GV-TBL4807
o GV-TBLP5800
Fixed:
- Issue of app not responding in General Mode in a narrowband environment
- Issues of Audio Talkback
- Failure to load relay data quota after purchase
GV-Eye version 3.1.1
Updated At: 2023-11-27
Changes: Nov 27, 2023
Version 3.1.1
Fixed:
- Failure to access playback recordings in DST time zones
- System failure when switching between single view and multi-view with iOS 17
GV-Eye version 3.1.0
Updated At: 2023-08-28
Changes: Aug 28, 2023
Version 3.1.0
New:
- Support for H.265 hardware decoding in General Mode
- Support for H.264 / H.265 hardware decoding in Easy Mode
- Support for hardware decoding (enabled by default) for single view in Easy Mode
Fixed:
- Issue of camera image glitch when hardware decoding is enabled in General Mode
Modified:
- Hardware decoding enabled by default for single view in General Mode
GV-Eye version 3.0.2
Updated At: 2023-03-28
Changes: Mar 28, 2023
Version 3.0.2
Failure to play back recordings for the last hour from UA-SNVR and UA-HD DVR hosts in the DST time zone
Disclaimer
Official App Store Link
We do not host GV-Eye on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for GV-Eye is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
