Closed
Conversation
There are thousands of warnings about one macro in a W=2 build: include/linux/filter.h:561:6: warning: declaration of 'ret' shadows a previous local [-Wshadow] Prefix all the locals in that macro with __ to avoid most of these warnings. Fixes: 492ecee ("bpf: enable program stats") Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Author
|
Master branch: 4725477 |
Author
|
At least one diff in series https://patchwork.kernel.org/project/netdevbpf/list/?series=370649 irrelevant now. Closing PR. |
kernel-patches-bot
pushed a commit
that referenced
this pull request
Dec 4, 2020
After enabling CONFIG_DMA_API_DEBUG there was a warning about using dma_unmap_single() in wrong direction from ath11k_dp_rx_process_mon_status(). [ 140.279477] ------------[ cut here ]------------ [ 140.279908] DMA-API: ath11k_pci 0000:06:00.0: device driver syncs DMA memory with different direction [device address=0x00000000fac08a40] [size=2176 bytes] [mapped with DMA_FROM_DEVICE] [s [ 140.279925] WARNING: CPU: 7 PID: 97 at kernel/dma/debug.c:1120 check_sync+0x494/0x730 [ 140.279939] Modules linked in: ath11k_pci ath11k mac80211 libarc4 cfg80211 qmi_helpers qrtr_mhi mhi qrtr ns nvme nvme_core [ 140.279958] CPU: 7 PID: 97 Comm: kworker/u16:1 Not tainted 5.10.0-rc4+ #262 [ 140.279968] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0049.2018.0801.1601 08/01/2018 [ 140.279995] Workqueue: phy0 ieee80211_scan_work [mac80211] [ 140.280009] RIP: 0010:check_sync+0x494/0x730 [ 140.280022] Code: 8b 4c 24 10 4c 8b 44 24 18 4c 8b 54 24 20 48 89 c6 4c 89 54 24 10 4c 89 f9 4c 89 ea 48 c7 c7 40 b9 74 9c 41 56 e8 2f a0 ab 00 <0f> 0b 48 89 ef e8 e5 17 ac 00 41 58 4c 8b [ 140.280033] RSP: 0018:ffff9f588024cbd8 EFLAGS: 00010086 [ 140.280046] RAX: 0000000000000000 RBX: ffff9f588024cc40 RCX: ffff8eed18dd9f98 [ 140.280057] RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff8eed18dd9f90 [ 140.280067] RBP: ffff8eebc1407800 R08: 00000000ffffffea R09: 0000000000000000 [ 140.280082] R10: 0000000000000003 R11: 3fffffffffffffff R12: ffffffff9e081060 [ 140.280093] R13: ffff8eebc43908b0 R14: ffffffff9c74c104 R15: 00000000fac08a40 [ 140.280104] FS: 0000000000000000(0000) GS:ffff8eed18c00000(0000) knlGS:0000000000000000 [ 140.280115] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 140.280127] CR2: 00007f6feafb12a0 CR3: 00000001604ca001 CR4: 00000000003706e0 [ 140.280138] Call Trace: [ 140.280149] <IRQ> [ 140.280161] debug_dma_sync_single_for_cpu+0x79/0x80 [ 140.280173] ? mark_held_locks+0x50/0x80 [ 140.280185] ? lockdep_hardirqs_on_prepare.part.0+0x65/0x130 [ 140.280197] ? __local_bh_enable_ip+0x6f/0xb0 [ 140.280215] ? ath11k_dp_rx_reap_mon_status_ring+0x202/0x340 [ath11k] [ 140.280231] ath11k_dp_rx_reap_mon_status_ring+0x22c/0x340 [ath11k] [ 140.280249] ? ath11k_dp_rx_process_mon_rings+0x1a0/0x1a0 [ath11k] [ 140.280265] ath11k_dp_rx_process_mon_status+0x83/0x3c0 [ath11k] [ 140.280278] ? __lock_acquire+0x3bd/0x6d0 [ 140.280296] ? ath11k_dp_rx_process_mon_rings+0x1a0/0x1a0 [ath11k] [ 140.280311] ? ath11k_dp_rx_process_mon_rings+0x1a0/0x1a0 [ath11k] [ 140.280326] ? ath11k_hw_mac_id_to_srng_id_qca6390+0x10/0x10 [ath11k] [ 140.280341] ? ath11k_dp_rx_process_mon_rings+0x4a/0x1a0 [ath11k] [ 140.280353] ? timer_fixup_init+0x30/0x30 [ 140.280367] ? ath11k_dp_rx_process_mon_rings+0x1a0/0x1a0 [ath11k] [ 140.280385] ath11k_dp_service_mon_ring+0x2b/0x50 [ath11k] [ 140.280400] ? ath11k_dp_rx_process_mon_rings+0x1a0/0x1a0 [ath11k] [ 140.280413] call_timer_fn+0xb1/0x2d0 [ 140.280426] __run_timers.part.0+0x205/0x2f0 [ 140.280439] run_timer_softirq+0x21/0x50 [ 140.280450] __do_softirq+0xc2/0x454 [ 140.280463] asm_call_irq_on_stack+0x12/0x20 [ 140.280476] </IRQ> [ 140.280488] do_softirq_own_stack+0x56/0x60 [ 140.280500] irq_exit_rcu+0x9a/0xd0 [ 140.280511] sysvec_apic_timer_interrupt+0x43/0xa0 [ 140.280526] asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 140.280540] RIP: 0010:_raw_spin_unlock_irqrestore+0x25/0x40 [ 140.280551] Code: 80 00 00 00 00 55 48 89 fd 48 83 c7 18 53 48 89 f3 48 8b 74 24 10 e8 ca 8f 4b ff 48 89 ef e8 22 dc 4b ff f6 c7 02 75 0c 53 9d <65> ff 0d 04 51 20 64 5b 5d c3 e8 9c 08 56 [ 140.280563] RSP: 0018:ffff9f58802e7878 EFLAGS: 00000246 [ 140.280578] RAX: 00000000000435ef RBX: 0000000000000246 RCX: 0000000000000040 [ 140.280592] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff9be13e84 [ 140.280603] RBP: ffff8eed18dde480 R08: 0000000000000001 R09: ffff8eebc2292760 [ 140.280614] R10: 0000000000000005 R11: ffff8eebc2292760 R12: 0000000000000000 [ 140.280625] R13: ffff9f58802e7900 R14: ffff8eed18dde480 R15: ffff8eed18dde480 [ 140.280637] ? _raw_spin_unlock_irqrestore+0x34/0x40 [ 140.280649] __mod_timer+0x274/0x400 [ 140.280661] ? wait_for_completion_timeout+0x76/0x110 [ 140.280675] schedule_timeout+0xa8/0x140 [ 140.280687] ? __next_timer_interrupt+0x100/0x100 [ 140.280698] wait_for_completion_timeout+0xa2/0x110 [ 140.280714] ath11k_start_scan+0x4c/0xf0 [ath11k] [ 140.280730] ath11k_mac_op_hw_scan+0x1e9/0x2c0 [ath11k] [ 140.280763] drv_hw_scan+0x79/0x260 [mac80211] [ 140.280789] __ieee80211_scan_completed+0x379/0x440 [mac80211] [ 140.280816] ieee80211_scan_work+0x12f/0x330 [mac80211] [ 140.280830] process_one_work+0x279/0x5b0 [ 140.280842] worker_thread+0x49/0x300 [ 140.280854] ? process_one_work+0x5b0/0x5b0 [ 140.280868] kthread+0x135/0x150 [ 140.280880] ? __kthread_bind_mask+0x60/0x60 [ 140.280891] ret_from_fork+0x22/0x30 [ 140.280903] irq event stamp: 275961 [ 140.280918] hardirqs last enabled at (275960): [<ffffffff9b270f1f>] __local_bh_enable_ip+0x6f/0xb0 [ 140.280931] hardirqs last disabled at (275961): [<ffffffff9be13ca3>] _raw_spin_lock_irqsave+0x63/0x80 [ 140.280946] softirqs last enabled at (275944): [<ffffffffc055288d>] ath11k_ce_send+0x14d/0x260 [ath11k] [ 140.280958] softirqs last disabled at (275953): [<ffffffff9c000f72>] asm_call_irq_on_stack+0x12/0x20 [ 140.280971] ---[ end trace 31cb94e18d401398 ]--- Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1606156046-24764-1-git-send-email-kvalo@codeaurora.org
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Jul 30, 2023
Adding test that attaches 50k uprobes in uprobe_multi binary. After the attach is done we run the binary and make sure we get proper amount of hits. The resulting attach/detach times on my setup: test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec test_bench_attach_uprobe:PASS:uprobes_count 0 nsec test_bench_attach_uprobe: attached in 0.346s test_bench_attach_uprobe: detached in 0.419s #262/5 uprobe_multi_test/bench_uprobe:OK Signed-off-by: Jiri Olsa <jolsa@kernel.org>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Jul 31, 2023
Adding test that attaches 50k uprobes in uprobe_multi binary. After the attach is done we run the binary and make sure we get proper amount of hits. The resulting attach/detach times on my setup: test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec test_bench_attach_uprobe:PASS:uprobes_count 0 nsec test_bench_attach_uprobe: attached in 0.346s test_bench_attach_uprobe: detached in 0.419s #262/5 uprobe_multi_test/bench_uprobe:OK Signed-off-by: Jiri Olsa <jolsa@kernel.org>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Aug 1, 2023
Adding test that attaches 50k uprobes in uprobe_multi binary. After the attach is done we run the binary and make sure we get proper amount of hits. The resulting attach/detach times on my setup: test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec test_bench_attach_uprobe:PASS:uprobes_count 0 nsec test_bench_attach_uprobe: attached in 0.346s test_bench_attach_uprobe: detached in 0.419s #262/5 uprobe_multi_test/bench_uprobe:OK Signed-off-by: Jiri Olsa <jolsa@kernel.org>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Aug 1, 2023
Adding test that attaches 50k uprobes in uprobe_multi binary. After the attach is done we run the binary and make sure we get proper amount of hits. The resulting attach/detach times on my setup: test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec test_bench_attach_uprobe:PASS:uprobes_count 0 nsec test_bench_attach_uprobe: attached in 0.346s test_bench_attach_uprobe: detached in 0.419s #262/5 uprobe_multi_test/bench_uprobe:OK Signed-off-by: Jiri Olsa <jolsa@kernel.org>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Aug 1, 2023
Adding test that attaches 50k uprobes in uprobe_multi binary. After the attach is done we run the binary and make sure we get proper amount of hits. The resulting attach/detach times on my setup: test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec test_bench_attach_uprobe:PASS:uprobes_count 0 nsec test_bench_attach_uprobe: attached in 0.346s test_bench_attach_uprobe: detached in 0.419s #262/5 uprobe_multi_test/bench_uprobe:OK Signed-off-by: Jiri Olsa <jolsa@kernel.org>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Aug 3, 2023
Adding test that attaches 50k uprobes in uprobe_multi binary. After the attach is done we run the binary and make sure we get proper amount of hits. The resulting attach/detach times on my setup: test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec test_bench_attach_uprobe:PASS:uprobes_count 0 nsec test_bench_attach_uprobe: attached in 0.346s test_bench_attach_uprobe: detached in 0.419s #262/5 uprobe_multi_test/bench_uprobe:OK Signed-off-by: Jiri Olsa <jolsa@kernel.org>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Aug 3, 2023
Adding test that attaches 50k uprobes in uprobe_multi binary. After the attach is done we run the binary and make sure we get proper amount of hits. The resulting attach/detach times on my setup: test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec test_bench_attach_uprobe:PASS:uprobes_count 0 nsec test_bench_attach_uprobe: attached in 0.346s test_bench_attach_uprobe: detached in 0.419s #262/5 uprobe_multi_test/bench_uprobe:OK Signed-off-by: Jiri Olsa <jolsa@kernel.org>
yurinnick
pushed a commit
to yurinnick/kernel-patches-bpf
that referenced
this pull request
Aug 3, 2023
Adding test that attaches 50k uprobes in uprobe_multi binary. After the attach is done we run the binary and make sure we get proper amount of hits. The resulting attach/detach times on my setup: test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec test_bench_attach_uprobe:PASS:uprobes_count 0 nsec test_bench_attach_uprobe: attached in 0.346s test_bench_attach_uprobe: detached in 0.419s kernel-patches#262/5 uprobe_multi_test/bench_uprobe:OK Signed-off-by: Jiri Olsa <jolsa@kernel.org>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Aug 3, 2023
Adding test that attaches 50k uprobes in uprobe_multi binary. After the attach is done we run the binary and make sure we get proper amount of hits. The resulting attach/detach times on my setup: test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec test_bench_attach_uprobe:PASS:uprobes_count 0 nsec test_bench_attach_uprobe: attached in 0.346s test_bench_attach_uprobe: detached in 0.419s #262/5 uprobe_multi_test/bench_uprobe:OK Signed-off-by: Jiri Olsa <jolsa@kernel.org>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Aug 4, 2023
Adding test that attaches 50k uprobes in uprobe_multi binary. After the attach is done we run the binary and make sure we get proper amount of hits. The resulting attach/detach times on my setup: test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec test_bench_attach_uprobe:PASS:uprobes_count 0 nsec test_bench_attach_uprobe: attached in 0.346s test_bench_attach_uprobe: detached in 0.419s #262/5 uprobe_multi_test/bench_uprobe:OK Signed-off-by: Jiri Olsa <jolsa@kernel.org>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Aug 4, 2023
Adding test that attaches 50k uprobes in uprobe_multi binary. After the attach is done we run the binary and make sure we get proper amount of hits. The resulting attach/detach times on my setup: test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec test_bench_attach_uprobe:PASS:uprobes_count 0 nsec test_bench_attach_uprobe: attached in 0.346s test_bench_attach_uprobe: detached in 0.419s #262/5 uprobe_multi_test/bench_uprobe:OK Signed-off-by: Jiri Olsa <jolsa@kernel.org>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Aug 4, 2023
Adding test that attaches 50k uprobes in uprobe_multi binary. After the attach is done we run the binary and make sure we get proper amount of hits. The resulting attach/detach times on my setup: test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec test_bench_attach_uprobe:PASS:uprobes_count 0 nsec test_bench_attach_uprobe: attached in 0.346s test_bench_attach_uprobe: detached in 0.419s #262/5 uprobe_multi_test/bench_uprobe:OK Signed-off-by: Jiri Olsa <jolsa@kernel.org>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Aug 4, 2023
Adding test that attaches 50k uprobes in uprobe_multi binary. After the attach is done we run the binary and make sure we get proper amount of hits. The resulting attach/detach times on my setup: test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec test_bench_attach_uprobe:PASS:uprobes_count 0 nsec test_bench_attach_uprobe: attached in 0.346s test_bench_attach_uprobe: detached in 0.419s #262/5 uprobe_multi_test/bench_uprobe:OK Signed-off-by: Jiri Olsa <jolsa@kernel.org>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Aug 4, 2023
Adding test that attaches 50k uprobes in uprobe_multi binary. After the attach is done we run the binary and make sure we get proper amount of hits. The resulting attach/detach times on my setup: test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec test_bench_attach_uprobe:PASS:uprobes_count 0 nsec test_bench_attach_uprobe: attached in 0.346s test_bench_attach_uprobe: detached in 0.419s #262/5 uprobe_multi_test/bench_uprobe:OK Signed-off-by: Jiri Olsa <jolsa@kernel.org>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Aug 4, 2023
Adding test that attaches 50k uprobes in uprobe_multi binary. After the attach is done we run the binary and make sure we get proper amount of hits. The resulting attach/detach times on my setup: test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec test_bench_attach_uprobe:PASS:uprobes_count 0 nsec test_bench_attach_uprobe: attached in 0.346s test_bench_attach_uprobe: detached in 0.419s #262/5 uprobe_multi_test/bench_uprobe:OK Signed-off-by: Jiri Olsa <jolsa@kernel.org>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Aug 4, 2023
Adding test that attaches 50k uprobes in uprobe_multi binary. After the attach is done we run the binary and make sure we get proper amount of hits. The resulting attach/detach times on my setup: test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec test_bench_attach_uprobe:PASS:uprobes_count 0 nsec test_bench_attach_uprobe: attached in 0.346s test_bench_attach_uprobe: detached in 0.419s #262/5 uprobe_multi_test/bench_uprobe:OK Signed-off-by: Jiri Olsa <jolsa@kernel.org>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Aug 7, 2023
Adding test that attaches 50k uprobes in uprobe_multi binary. After the attach is done we run the binary and make sure we get proper amount of hits. The resulting attach/detach times on my setup: test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec test_bench_attach_uprobe:PASS:uprobes_count 0 nsec test_bench_attach_uprobe: attached in 0.346s test_bench_attach_uprobe: detached in 0.419s #262/5 uprobe_multi_test/bench_uprobe:OK Signed-off-by: Jiri Olsa <jolsa@kernel.org>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Aug 7, 2023
Adding test that attaches 50k uprobes in uprobe_multi binary. After the attach is done we run the binary and make sure we get proper amount of hits. The resulting attach/detach times on my setup: test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec test_bench_attach_uprobe:PASS:uprobes_count 0 nsec test_bench_attach_uprobe: attached in 0.346s test_bench_attach_uprobe: detached in 0.419s #262/5 uprobe_multi_test/bench_uprobe:OK Signed-off-by: Jiri Olsa <jolsa@kernel.org>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Aug 14, 2023
Adding test that attaches 50k uprobes in uprobe_multi binary. After the attach is done we run the binary and make sure we get proper amount of hits. The resulting attach/detach times on my setup: test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec test_bench_attach_uprobe:PASS:uprobes_count 0 nsec test_bench_attach_uprobe: attached in 0.346s test_bench_attach_uprobe: detached in 0.419s #262/5 uprobe_multi_test/bench_uprobe:OK Signed-off-by: Jiri Olsa <jolsa@kernel.org>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Aug 14, 2023
Add several new tcx test cases to improve test coverage. This also includes a few new tests with ingress instead of clsact qdisc, to cover the fix from commit dc644b5 ("tcx: Fix splat in ingress_destroy upon tcx_entry_free"). # ./test_progs -t tc [...] #234 tc_links_after:OK #235 tc_links_append:OK #236 tc_links_basic:OK #237 tc_links_before:OK #238 tc_links_chain_classic:OK #239 tc_links_chain_mixed:OK #240 tc_links_dev_cleanup:OK #241 tc_links_dev_mixed:OK #242 tc_links_ingress:OK #243 tc_links_invalid:OK #244 tc_links_prepend:OK #245 tc_links_replace:OK #246 tc_links_revision:OK #247 tc_opts_after:OK #248 tc_opts_append:OK #249 tc_opts_basic:OK #250 tc_opts_before:OK #251 tc_opts_chain_classic:OK #252 tc_opts_chain_mixed:OK #253 tc_opts_delete_empty:OK #254 tc_opts_demixed:OK #255 tc_opts_detach:OK #256 tc_opts_detach_after:OK #257 tc_opts_detach_before:OK #258 tc_opts_dev_cleanup:OK #259 tc_opts_invalid:OK #260 tc_opts_mixed:OK #261 tc_opts_prepend:OK #262 tc_opts_replace:OK #263 tc_opts_revision:OK [...] Summary: 44/38 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
chantra
pushed a commit
to chantra/kernel-patches-bpf
that referenced
this pull request
Aug 14, 2023
Adding test that attaches 50k uprobes in uprobe_multi binary. After the attach is done we run the binary and make sure we get proper amount of hits. The resulting attach/detach times on my setup: test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec test_bench_attach_uprobe:PASS:uprobes_count 0 nsec test_bench_attach_uprobe: attached in 0.346s test_bench_attach_uprobe: detached in 0.419s kernel-patches#262/5 uprobe_multi_test/bench_uprobe:OK Signed-off-by: Jiri Olsa <jolsa@kernel.org>
chantra
pushed a commit
to chantra/kernel-patches-bpf
that referenced
this pull request
Aug 14, 2023
Add several new tcx test cases to improve test coverage. This also includes a few new tests with ingress instead of clsact qdisc, to cover the fix from commit dc644b5 ("tcx: Fix splat in ingress_destroy upon tcx_entry_free"). # ./test_progs -t tc [...] kernel-patches#234 tc_links_after:OK kernel-patches#235 tc_links_append:OK kernel-patches#236 tc_links_basic:OK kernel-patches#237 tc_links_before:OK kernel-patches#238 tc_links_chain_classic:OK kernel-patches#239 tc_links_chain_mixed:OK kernel-patches#240 tc_links_dev_cleanup:OK kernel-patches#241 tc_links_dev_mixed:OK kernel-patches#242 tc_links_ingress:OK kernel-patches#243 tc_links_invalid:OK kernel-patches#244 tc_links_prepend:OK kernel-patches#245 tc_links_replace:OK kernel-patches#246 tc_links_revision:OK kernel-patches#247 tc_opts_after:OK kernel-patches#248 tc_opts_append:OK kernel-patches#249 tc_opts_basic:OK kernel-patches#250 tc_opts_before:OK kernel-patches#251 tc_opts_chain_classic:OK kernel-patches#252 tc_opts_chain_mixed:OK kernel-patches#253 tc_opts_delete_empty:OK kernel-patches#254 tc_opts_demixed:OK kernel-patches#255 tc_opts_detach:OK kernel-patches#256 tc_opts_detach_after:OK kernel-patches#257 tc_opts_detach_before:OK kernel-patches#258 tc_opts_dev_cleanup:OK kernel-patches#259 tc_opts_invalid:OK kernel-patches#260 tc_opts_mixed:OK kernel-patches#261 tc_opts_prepend:OK kernel-patches#262 tc_opts_replace:OK kernel-patches#263 tc_opts_revision:OK [...] Summary: 44/38 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Aug 15, 2023
Add several new tcx test cases to improve test coverage. This also includes a few new tests with ingress instead of clsact qdisc, to cover the fix from commit dc644b5 ("tcx: Fix splat in ingress_destroy upon tcx_entry_free"). # ./test_progs -t tc [...] #234 tc_links_after:OK #235 tc_links_append:OK #236 tc_links_basic:OK #237 tc_links_before:OK #238 tc_links_chain_classic:OK #239 tc_links_chain_mixed:OK #240 tc_links_dev_cleanup:OK #241 tc_links_dev_mixed:OK #242 tc_links_ingress:OK #243 tc_links_invalid:OK #244 tc_links_prepend:OK #245 tc_links_replace:OK #246 tc_links_revision:OK #247 tc_opts_after:OK #248 tc_opts_append:OK #249 tc_opts_basic:OK #250 tc_opts_before:OK #251 tc_opts_chain_classic:OK #252 tc_opts_chain_mixed:OK #253 tc_opts_delete_empty:OK #254 tc_opts_demixed:OK #255 tc_opts_detach:OK #256 tc_opts_detach_after:OK #257 tc_opts_detach_before:OK #258 tc_opts_dev_cleanup:OK #259 tc_opts_invalid:OK #260 tc_opts_mixed:OK #261 tc_opts_prepend:OK #262 tc_opts_replace:OK #263 tc_opts_revision:OK [...] Summary: 44/38 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/r/8699efc284b75ccdc51ddf7062fa2370330dc6c0.1692029283.git.daniel@iogearbox.net Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Aug 15, 2023
Adding test that attaches 50k uprobes in uprobe_multi binary. After the attach is done we run the binary and make sure we get proper amount of hits. The resulting attach/detach times on my setup: test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec test_bench_attach_uprobe:PASS:uprobes_count 0 nsec test_bench_attach_uprobe: attached in 0.346s test_bench_attach_uprobe: detached in 0.419s #262/5 uprobe_multi_test/bench_uprobe:OK Signed-off-by: Jiri Olsa <jolsa@kernel.org>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Aug 15, 2023
Adding test that attaches 50k uprobes in uprobe_multi binary. After the attach is done we run the binary and make sure we get proper amount of hits. The resulting attach/detach times on my setup: test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec test_bench_attach_uprobe:PASS:uprobes_count 0 nsec test_bench_attach_uprobe: attached in 0.346s test_bench_attach_uprobe: detached in 0.419s #262/5 uprobe_multi_test/bench_uprobe:OK Signed-off-by: Jiri Olsa <jolsa@kernel.org>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Aug 15, 2023
Adding test that attaches 50k uprobes in uprobe_multi binary. After the attach is done we run the binary and make sure we get proper amount of hits. The resulting attach/detach times on my setup: test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec test_bench_attach_uprobe:PASS:uprobes_count 0 nsec test_bench_attach_uprobe: attached in 0.346s test_bench_attach_uprobe: detached in 0.419s #262/5 uprobe_multi_test/bench_uprobe:OK Signed-off-by: Jiri Olsa <jolsa@kernel.org>
chantra
pushed a commit
to chantra/kernel-patches-bpf
that referenced
this pull request
Aug 16, 2023
Adding test that attaches 50k uprobes in uprobe_multi binary. After the attach is done we run the binary and make sure we get proper amount of hits. The resulting attach/detach times on my setup: test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec test_bench_attach_uprobe:PASS:uprobes_count 0 nsec test_bench_attach_uprobe: attached in 0.346s test_bench_attach_uprobe: detached in 0.419s kernel-patches#262/5 uprobe_multi_test/bench_uprobe:OK Signed-off-by: Jiri Olsa <jolsa@kernel.org>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Aug 16, 2023
Adding test that attaches 50k uprobes in uprobe_multi binary. After the attach is done we run the binary and make sure we get proper amount of hits. The resulting attach/detach times on my setup: test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec test_bench_attach_uprobe:PASS:uprobes_count 0 nsec test_bench_attach_uprobe: attached in 0.346s test_bench_attach_uprobe: detached in 0.419s #262/5 uprobe_multi_test/bench_uprobe:OK Signed-off-by: Jiri Olsa <jolsa@kernel.org>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Aug 16, 2023
Adding test that attaches 50k uprobes in uprobe_multi binary. After the attach is done we run the binary and make sure we get proper amount of hits. The resulting attach/detach times on my setup: test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec test_bench_attach_uprobe:PASS:uprobes_count 0 nsec test_bench_attach_uprobe: attached in 0.346s test_bench_attach_uprobe: detached in 0.419s #262/5 uprobe_multi_test/bench_uprobe:OK Signed-off-by: Jiri Olsa <jolsa@kernel.org>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Aug 16, 2023
Adding test that attaches 50k uprobes in uprobe_multi binary. After the attach is done we run the binary and make sure we get proper amount of hits. The resulting attach/detach times on my setup: test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec test_bench_attach_uprobe:PASS:uprobes_count 0 nsec test_bench_attach_uprobe: attached in 0.346s test_bench_attach_uprobe: detached in 0.419s #262/5 uprobe_multi_test/bench_uprobe:OK Signed-off-by: Jiri Olsa <jolsa@kernel.org>
chantra
pushed a commit
to chantra/kernel-patches-bpf
that referenced
this pull request
Aug 16, 2023
Adding test that attaches 50k uprobes in uprobe_multi binary. After the attach is done we run the binary and make sure we get proper amount of hits. The resulting attach/detach times on my setup: test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec test_bench_attach_uprobe:PASS:uprobes_count 0 nsec test_bench_attach_uprobe: attached in 0.346s test_bench_attach_uprobe: detached in 0.419s kernel-patches#262/5 uprobe_multi_test/bench_uprobe:OK Signed-off-by: Jiri Olsa <jolsa@kernel.org>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Aug 17, 2023
Adding test that attaches 50k uprobes in uprobe_multi binary. After the attach is done we run the binary and make sure we get proper amount of hits. The resulting attach/detach times on my setup: test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec test_bench_attach_uprobe:PASS:uprobes_count 0 nsec test_bench_attach_uprobe: attached in 0.346s test_bench_attach_uprobe: detached in 0.419s #262/5 uprobe_multi_test/bench_uprobe:OK Signed-off-by: Jiri Olsa <jolsa@kernel.org>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Aug 18, 2023
Adding test that attaches 50k uprobes in uprobe_multi binary. After the attach is done we run the binary and make sure we get proper amount of hits. The resulting attach/detach times on my setup: test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec test_bench_attach_uprobe:PASS:uprobes_count 0 nsec test_bench_attach_uprobe: attached in 0.346s test_bench_attach_uprobe: detached in 0.419s #262/5 uprobe_multi_test/bench_uprobe:OK Signed-off-by: Jiri Olsa <jolsa@kernel.org>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Aug 18, 2023
Adding test that attaches 50k uprobes in uprobe_multi binary. After the attach is done we run the binary and make sure we get proper amount of hits. The resulting attach/detach times on my setup: test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec test_bench_attach_uprobe:PASS:uprobes_count 0 nsec test_bench_attach_uprobe: attached in 0.346s test_bench_attach_uprobe: detached in 0.419s #262/5 uprobe_multi_test/bench_uprobe:OK Signed-off-by: Jiri Olsa <jolsa@kernel.org>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Aug 18, 2023
Adding test that attaches 50k uprobes in uprobe_multi binary. After the attach is done we run the binary and make sure we get proper amount of hits. The resulting attach/detach times on my setup: test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec test_bench_attach_uprobe:PASS:uprobes_count 0 nsec test_bench_attach_uprobe: attached in 0.346s test_bench_attach_uprobe: detached in 0.419s #262/5 uprobe_multi_test/bench_uprobe:OK Signed-off-by: Jiri Olsa <jolsa@kernel.org>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Aug 18, 2023
Adding test that attaches 50k uprobes in uprobe_multi binary. After the attach is done we run the binary and make sure we get proper amount of hits. The resulting attach/detach times on my setup: test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec test_bench_attach_uprobe:PASS:uprobes_count 0 nsec test_bench_attach_uprobe: attached in 0.346s test_bench_attach_uprobe: detached in 0.419s #262/5 uprobe_multi_test/bench_uprobe:OK Signed-off-by: Jiri Olsa <jolsa@kernel.org>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Aug 18, 2023
Adding test that attaches 50k uprobes in uprobe_multi binary. After the attach is done we run the binary and make sure we get proper amount of hits. The resulting attach/detach times on my setup: test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec test_bench_attach_uprobe:PASS:uprobes_count 0 nsec test_bench_attach_uprobe: attached in 0.346s test_bench_attach_uprobe: detached in 0.419s #262/5 uprobe_multi_test/bench_uprobe:OK Signed-off-by: Jiri Olsa <jolsa@kernel.org>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Aug 18, 2023
Adding test that attaches 50k uprobes in uprobe_multi binary. After the attach is done we run the binary and make sure we get proper amount of hits. The resulting attach/detach times on my setup: test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec test_bench_attach_uprobe:PASS:uprobes_count 0 nsec test_bench_attach_uprobe: attached in 0.346s test_bench_attach_uprobe: detached in 0.419s #262/5 uprobe_multi_test/bench_uprobe:OK Signed-off-by: Jiri Olsa <jolsa@kernel.org>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Aug 21, 2023
Adding test that attaches 50k uprobes in uprobe_multi binary. After the attach is done we run the binary and make sure we get proper amount of hits. The resulting attach/detach times on my setup: test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec test_bench_attach_uprobe:PASS:uprobes_count 0 nsec test_bench_attach_uprobe: attached in 0.346s test_bench_attach_uprobe: detached in 0.419s #262/5 uprobe_multi_test/bench_uprobe:OK Signed-off-by: Jiri Olsa <jolsa@kernel.org>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Aug 21, 2023
Adding test that attaches 50k uprobes in uprobe_multi binary. After the attach is done we run the binary and make sure we get proper amount of hits. The resulting attach/detach times on my setup: test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec test_bench_attach_uprobe:PASS:uprobes_count 0 nsec test_bench_attach_uprobe: attached in 0.346s test_bench_attach_uprobe: detached in 0.419s #262/5 uprobe_multi_test/bench_uprobe:OK Signed-off-by: Jiri Olsa <jolsa@kernel.org>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Aug 21, 2023
Adding test that attaches 50k uprobes in uprobe_multi binary. After the attach is done we run the binary and make sure we get proper amount of hits. The resulting attach/detach times on my setup: test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec test_bench_attach_uprobe:PASS:uprobes_count 0 nsec test_bench_attach_uprobe: attached in 0.346s test_bench_attach_uprobe: detached in 0.419s #262/5 uprobe_multi_test/bench_uprobe:OK Signed-off-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20230809083440.3209381-24-jolsa@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Sep 29, 2023
Add various tests to check maximum number of supported programs being attached: # ./vmtest.sh -- ./test_progs -t tc_opts [...] ./test_progs -t tc_opts [ 1.185325] bpf_testmod: loading out-of-tree module taints kernel. [ 1.186826] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel [ 1.270123] tsc: Refined TSC clocksource calibration: 3407.988 MHz [ 1.272428] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fc932722, max_idle_ns: 440795381586 ns [ 1.276408] clocksource: Switched to clocksource tsc #252 tc_opts_after:OK #253 tc_opts_append:OK #254 tc_opts_basic:OK #255 tc_opts_before:OK #256 tc_opts_chain_classic:OK #257 tc_opts_chain_mixed:OK #258 tc_opts_delete_empty:OK #259 tc_opts_demixed:OK #260 tc_opts_detach:OK #261 tc_opts_detach_after:OK #262 tc_opts_detach_before:OK #263 tc_opts_dev_cleanup:OK #264 tc_opts_invalid:OK #265 tc_opts_max:OK <--- (new test) #266 tc_opts_mixed:OK #267 tc_opts_prepend:OK #268 tc_opts_replace:OK #269 tc_opts_revision:OK Summary: 18/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Sep 29, 2023
Add various tests to check maximum number of supported programs being attached: # ./vmtest.sh -- ./test_progs -t tc_opts [...] ./test_progs -t tc_opts [ 1.185325] bpf_testmod: loading out-of-tree module taints kernel. [ 1.186826] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel [ 1.270123] tsc: Refined TSC clocksource calibration: 3407.988 MHz [ 1.272428] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fc932722, max_idle_ns: 440795381586 ns [ 1.276408] clocksource: Switched to clocksource tsc #252 tc_opts_after:OK #253 tc_opts_append:OK #254 tc_opts_basic:OK #255 tc_opts_before:OK #256 tc_opts_chain_classic:OK #257 tc_opts_chain_mixed:OK #258 tc_opts_delete_empty:OK #259 tc_opts_demixed:OK #260 tc_opts_detach:OK #261 tc_opts_detach_after:OK #262 tc_opts_detach_before:OK #263 tc_opts_dev_cleanup:OK #264 tc_opts_invalid:OK #265 tc_opts_max:OK <--- (new test) #266 tc_opts_mixed:OK #267 tc_opts_prepend:OK #268 tc_opts_replace:OK #269 tc_opts_revision:OK Summary: 18/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20230929204121.20305-2-daniel@iogearbox.net
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Sep 29, 2023
Add various tests to check maximum number of supported programs being attached: # ./vmtest.sh -- ./test_progs -t tc_opts [...] ./test_progs -t tc_opts [ 1.185325] bpf_testmod: loading out-of-tree module taints kernel. [ 1.186826] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel [ 1.270123] tsc: Refined TSC clocksource calibration: 3407.988 MHz [ 1.272428] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fc932722, max_idle_ns: 440795381586 ns [ 1.276408] clocksource: Switched to clocksource tsc #252 tc_opts_after:OK #253 tc_opts_append:OK #254 tc_opts_basic:OK #255 tc_opts_before:OK #256 tc_opts_chain_classic:OK #257 tc_opts_chain_mixed:OK #258 tc_opts_delete_empty:OK #259 tc_opts_demixed:OK #260 tc_opts_detach:OK #261 tc_opts_detach_after:OK #262 tc_opts_detach_before:OK #263 tc_opts_dev_cleanup:OK #264 tc_opts_invalid:OK #265 tc_opts_max:OK <--- (new test) #266 tc_opts_mixed:OK #267 tc_opts_prepend:OK #268 tc_opts_replace:OK #269 tc_opts_revision:OK Summary: 18/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20230929204121.20305-2-daniel@iogearbox.net
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Oct 6, 2023
Add a new test case which performs double query of the bpf_mprog through libbpf API, but also via raw bpf(2) syscall. This is testing to gather first the count and then in a subsequent probe the full information with the program array without clearing passed structs in between. # ./vmtest.sh -- ./test_progs -t tc_opts [...] ./test_progs -t tc_opts [ 1.398818] tsc: Refined TSC clocksource calibration: 3407.999 MHz [ 1.400263] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fd336761, max_idle_ns: 440795243819 ns [ 1.402734] clocksource: Switched to clocksource tsc [ 1.426639] bpf_testmod: loading out-of-tree module taints kernel. [ 1.428112] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel #252 tc_opts_after:OK #253 tc_opts_append:OK #254 tc_opts_basic:OK #255 tc_opts_before:OK #256 tc_opts_chain_classic:OK #257 tc_opts_chain_mixed:OK #258 tc_opts_delete_empty:OK #259 tc_opts_demixed:OK #260 tc_opts_detach:OK #261 tc_opts_detach_after:OK #262 tc_opts_detach_before:OK #263 tc_opts_dev_cleanup:OK #264 tc_opts_invalid:OK #265 tc_opts_max:OK #266 tc_opts_mixed:OK #267 tc_opts_prepend:OK #268 tc_opts_query:OK <--- (new test) #269 tc_opts_replace:OK #270 tc_opts_revision:OK Summary: 19/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Oct 6, 2023
Add a new test case to query on an empty bpf_mprog and pass the revision directly into expected_revision for attachment to assert that this does succeed. ./test_progs -t tc_opts [ 1.406778] tsc: Refined TSC clocksource calibration: 3407.990 MHz [ 1.408863] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fcaf6eb0, max_idle_ns: 440795321766 ns [ 1.412419] clocksource: Switched to clocksource tsc [ 1.428671] bpf_testmod: loading out-of-tree module taints kernel. [ 1.430260] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel #252 tc_opts_after:OK #253 tc_opts_append:OK #254 tc_opts_basic:OK #255 tc_opts_before:OK #256 tc_opts_chain_classic:OK #257 tc_opts_chain_mixed:OK #258 tc_opts_delete_empty:OK #259 tc_opts_demixed:OK #260 tc_opts_detach:OK #261 tc_opts_detach_after:OK #262 tc_opts_detach_before:OK #263 tc_opts_dev_cleanup:OK #264 tc_opts_invalid:OK #265 tc_opts_max:OK #266 tc_opts_mixed:OK #267 tc_opts_prepend:OK #268 tc_opts_query:OK #269 tc_opts_query_attach:OK <--- (new test) #270 tc_opts_replace:OK #271 tc_opts_revision:OK Summary: 20/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Oct 7, 2023
Add a new test case which performs double query of the bpf_mprog through libbpf API, but also via raw bpf(2) syscall. This is testing to gather first the count and then in a subsequent probe the full information with the program array without clearing passed structs in between. # ./vmtest.sh -- ./test_progs -t tc_opts [...] ./test_progs -t tc_opts [ 1.398818] tsc: Refined TSC clocksource calibration: 3407.999 MHz [ 1.400263] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fd336761, max_idle_ns: 440795243819 ns [ 1.402734] clocksource: Switched to clocksource tsc [ 1.426639] bpf_testmod: loading out-of-tree module taints kernel. [ 1.428112] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel #252 tc_opts_after:OK #253 tc_opts_append:OK #254 tc_opts_basic:OK #255 tc_opts_before:OK #256 tc_opts_chain_classic:OK #257 tc_opts_chain_mixed:OK #258 tc_opts_delete_empty:OK #259 tc_opts_demixed:OK #260 tc_opts_detach:OK #261 tc_opts_detach_after:OK #262 tc_opts_detach_before:OK #263 tc_opts_dev_cleanup:OK #264 tc_opts_invalid:OK #265 tc_opts_max:OK #266 tc_opts_mixed:OK #267 tc_opts_prepend:OK #268 tc_opts_query:OK <--- (new test) #269 tc_opts_replace:OK #270 tc_opts_revision:OK Summary: 19/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/r/20231006220655.1653-4-daniel@iogearbox.net Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Oct 7, 2023
Add a new test case to query on an empty bpf_mprog and pass the revision directly into expected_revision for attachment to assert that this does succeed. ./test_progs -t tc_opts [ 1.406778] tsc: Refined TSC clocksource calibration: 3407.990 MHz [ 1.408863] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fcaf6eb0, max_idle_ns: 440795321766 ns [ 1.412419] clocksource: Switched to clocksource tsc [ 1.428671] bpf_testmod: loading out-of-tree module taints kernel. [ 1.430260] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel #252 tc_opts_after:OK #253 tc_opts_append:OK #254 tc_opts_basic:OK #255 tc_opts_before:OK #256 tc_opts_chain_classic:OK #257 tc_opts_chain_mixed:OK #258 tc_opts_delete_empty:OK #259 tc_opts_demixed:OK #260 tc_opts_detach:OK #261 tc_opts_detach_after:OK #262 tc_opts_detach_before:OK #263 tc_opts_dev_cleanup:OK #264 tc_opts_invalid:OK #265 tc_opts_max:OK #266 tc_opts_mixed:OK #267 tc_opts_prepend:OK #268 tc_opts_query:OK #269 tc_opts_query_attach:OK <--- (new test) #270 tc_opts_replace:OK #271 tc_opts_revision:OK Summary: 20/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/r/20231006220655.1653-6-daniel@iogearbox.net Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
2 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Pull request for series with
subject: bpf: fix -Wshadow warnings
version: 1
url: https://patchwork.kernel.org/project/netdevbpf/list/?series=370649