Conversation
mining and the amount of space available for priority transactions.
For steady-state operation, this reduces the average time between wallet disk writes from once per block to once per hour. On -rescan, witness caches are only written out at the end along with the best block, increasing speed while ensuring that on-disk state is kept consistent. Witness caches are now never recreated during a -reindex, on the assumption that the blocks themselves are not changing (the chain is just being reconstructed), and so the witnesses will remain valid. Part of #1749.
These can be removed after the next MiniUPnP release. Closes #1835.
"You have validated 0 transactions!" sounds a little less enthusiastic that intended. Also, only says "1 transaction".
Metrics - Don't exclaim unless > 1 "You have validated 0 transactions!" sounds a little less enthusiastic that intended. This uses a period instead. After patch, it also says "a transaction".
* separate completion for bitcoind and bitcoin-cli * remove RPC support from bitcoind completion * add completion for bitcoin-tx and bitcoin-qt * rely on autoloading of completions
At this point, I believe it is universally accepted that "blockchain" is one word, and should not be separated into two.
…verification behavior to be tuned by the caller.
…ent in time and not reject
miketout
referenced
this pull request
in miketout/VerusCoin
Sep 12, 2018
* Force portable code * Switch to old MMX instructions, avoiding SSE & SSE2 instructions. * Less agressive, leave verus code (which checks for it) using advanced instructions. * Compiling only for windows * Update .gitlab-ci.yml * Try -march=native for C++ code generation. * Tweaking machine architecture settings. * Try native alone. * Also get LIBCRYPTOCONDITIONS to -march=native * Switch other lib to native as well. * Try switching back further for CPU architecture. * Even lower end settings. * Turn on symbols. * Use sse2,3 and 4 capable x64. * Once again let verus lib use advances instructioins since it checjs via CPUID at run time. * Modify a few more makefile entries. * Switch to AMD model similar to our test system. * Get snark makefile to k8 too. * Yet another -march to modify to k8, or two of them. * Brute force k8 settings, comment non-portable code out. * Put the condition on cpuid back. * Put non-portable advenced instruction code back * Enable instructions. * Add lib for separate settings. * Update .gitlab-ci.yml * Update .gitlab-ci.yml * Update .gitlab-ci.yml * Update .gitlab-ci.yml * replacing k8-sse3 specific flags to x86-84 * updating versions * Propagate verusd changes.
miketout
referenced
this pull request
in miketout/VerusCoin
Sep 12, 2018
* Fix * -print * Filter null outputs * Rewards cc * Fix * Linker * Fix * Fix * KOMODO_LONGESTCHAIN * Mining_height * Fix dropped assetoshis * Error null CCvin * Test * Test * Test * Fix sell * Fix order book prints * ) * Test * Test * Fix order display * Fix oops * Fix duplicate vin * Remove dust check * Fix silly bug * Test * Test * Fix * Test * Test * Test * Test * Test * Test * Test * Fix compiler error: call of overloaded 'Pair(const char [9], time_t)' is ambiguous * Fix compiler error: call of overloaded 'Pair(const char [9], time_t)' is ambiguous * Correctly parse optional top parameter to getsnapshot * Fix token orders crash * Add SEC to assetchains.json * Split amounts/validation: bid, ask, swap * Fixes * Test * Test * Test * Test * +print * Test * Test * Test * Test * Test * Test * SMALLVAL * Test * Test * Test * Test * Test * Test * Test * Properly handle multiple vins funding fills * Test * Test * Test * Test * Fix ask fill dest * Test * Rewards functions * Fix * Test * Params to rewardscalc * Create funding, addfunding, lock * Test * +print * tokenswapask * Test * Test * Swap functions * ac_cc under 1000 is not fungible * Allow to cancel invalid orders * Prevent negative numbers in assets tx * Uint64 -> int64 * Fix oops * Prevent bid for nonexistent assetid * Error check bidding for assetid that is txid but not asset creation * Fix * Fix * Add pause if scriptcheckqueue isn't idle * Fix * -> -> . * Fix * Test * VOBJ * Tokeninfo rpc * Asset list * Test * strcpy(cp->normaladdr,AssetsNormaladdr); * Fix * Rewardslist rewardsinfo * Fix * Fix * Fix * Vent * fix * Int64 * Int64 * Fix createfunding * Fix false positive error * sbits = stringbits(planstr); * Fix maxmoney * Fix funding name * Test * Print * CCutoxvalue * Fix rewardslock utxo selection * New PoW diff calc * tst * Test * Oldflag for PoW calc * Test * Test * tst * Test * Test * Filter locked utxo * Test * Fix PoW recalc * Test min seconds * int64_t CCduration(uint256 txid) * Test * Test * Test one day * Test * Test * Test * Test * Test * Test * Test * Test * Test * Test * Test * Test * Test * Test * Test * Test * Prevent inputs of CC inputs * Test * tst * Test * Test * Test * Test * Test * Test * Test * Test * Test * Test * Test * Test * New rewards address * Fix mask * Test * Test * Test * Test * Test * Test * Teest * Stricter vin/vout checks for assets * Token swap ready for testing * Fix rewards unlock * Fix * Test * Validate rewards * Test * Trim funding input * Test * Test * Test * Test * Test * Test * Test * Test * Test * Activate CCduration constraint * Parameterize KOMODO_FIRSTFUNGIBLEID to 100 * +print * Test * Test * Test * Test * Fix c script * Test * Initial dice morph from rewards.cpp * Fix * Test * Fix * Test * Diceaddfunds * Fix * Dice list and dice info * dicefund * Dice bet * Test * Test * Put process block's check block call inside lock, revert mining testblockvalidity outside lock * Don't exit fiat-cli on error * Docs for coinsupply RPC and improved error-checking on block height * Version to 0.3.12-beta. * Change version to 0.3.12 for gilab CI. * Put undefines for _cpuid back. * Network decentralizatoin and bug fixes * Remove unnecessary staking delay * Staking and mining timeing improvements * Put staking readout once per staking loop so people know it's staking * Fail on get_chainactive before lock if checks fail * Fix check for stake transaction after Komodo merge * Portable dev (#105) * Force portable code * Switch to old MMX instructions, avoiding SSE & SSE2 instructions. * Less agressive, leave verus code (which checks for it) using advanced instructions. * Compiling only for windows * Update .gitlab-ci.yml * Try -march=native for C++ code generation. * Tweaking machine architecture settings. * Try native alone. * Also get LIBCRYPTOCONDITIONS to -march=native * Switch other lib to native as well. * Try switching back further for CPU architecture. * Even lower end settings. * Turn on symbols. * Use sse2,3 and 4 capable x64. * Once again let verus lib use advances instructioins since it checjs via CPUID at run time. * Modify a few more makefile entries. * Switch to AMD model similar to our test system. * Get snark makefile to k8 too. * Yet another -march to modify to k8, or two of them. * Brute force k8 settings, comment non-portable code out. * Put the condition on cpuid back. * Put non-portable advenced instruction code back * Enable instructions. * Add lib for separate settings. * Update .gitlab-ci.yml * Update .gitlab-ci.yml * Update .gitlab-ci.yml * Update .gitlab-ci.yml * replacing k8-sse3 specific flags to x86-84 * updating versions * updating versions * Get verus-cli verusd updated (#106) * Force portable code * Switch to old MMX instructions, avoiding SSE & SSE2 instructions. * Less agressive, leave verus code (which checks for it) using advanced instructions. * Compiling only for windows * Update .gitlab-ci.yml * Try -march=native for C++ code generation. * Tweaking machine architecture settings. * Try native alone. * Also get LIBCRYPTOCONDITIONS to -march=native * Switch other lib to native as well. * Try switching back further for CPU architecture. * Even lower end settings. * Turn on symbols. * Use sse2,3 and 4 capable x64. * Once again let verus lib use advances instructioins since it checjs via CPUID at run time. * Modify a few more makefile entries. * Switch to AMD model similar to our test system. * Get snark makefile to k8 too. * Yet another -march to modify to k8, or two of them. * Brute force k8 settings, comment non-portable code out. * Put the condition on cpuid back. * Put non-portable advenced instruction code back * Enable instructions. * Add lib for separate settings. * Update .gitlab-ci.yml * Update .gitlab-ci.yml * Update .gitlab-ci.yml * Update .gitlab-ci.yml * replacing k8-sse3 specific flags to x86-84 * updating versions * Propagate verusd changes.
jl777
pushed a commit
that referenced
this pull request
Apr 17, 2019
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
9 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
synchronize versions