chore(deps): update rust crate codspeed-criterion-compat to v2 by renovate[bot] · Pull Request #443 · evenfurther/pathfinding

renovate · 2023-09-22T14:29:51Z

This PR contains the following updates:

Package	Type	Update	Change
codspeed-criterion-compat (source)	dev-dependencies	major	`1.1.0` -> `2.2.0`

Release Notes

CodSpeedHQ/codspeed-rust (codspeed-criterion-compat)

`v2.2.0`

Compare Source

What's Changed

It's now possible to disable codspeed_criterion_compat default features.

Details

fix: allow disabling criterion default features by @art049 in https://github.com/CodSpeedHQ/codspeed-rust/pull/12

Full Changelog: CodSpeedHQ/codspeed-rust@v2.1.0...v2.2.0

`v2.1.0`

Compare Source

🎉 What's Changed

Relative paths are now properly handled when using the working-directory action parameter.

📚 Details

fix: fix relative path when using working-directory by @art049 in https://github.com/CodSpeedHQ/codspeed-rust/pull/9

Full Changelog: CodSpeedHQ/codspeed-rust@v2.0.0...v2.1.0

`v2.0.0`

Compare Source

🎉 What's Changed

Each benchmark is warmed up before each run to reduce the flakiness and the side effects related to the order in which the benchmarks are run.
AsyncBencher is now supported with the criterion compatibility layer.
Debug symbols are now generated during the build of the benchmarks, allowing more granularity in the performance reports and detailed profiling. More details can be found in the documentation.

🚀 Migration Path

This is a breaking change and might affect your current performance baseline a bit. But here's the exciting part - it's packed with new, cool features and promises improved result stability 🎉!

In some cases, the warmup might optimize out the benchmark. In that case, adding black_box should help, also don't hesitate to open an issue so we can have a look and document the behavior.

We recommend you create a standalone PR to update the package, acknowledge the potential regressions, and merge it to update the baseline on your default branch.

📚 Details

Features

feat: add debug symbols in the benchmark build config by @art049 in https://github.com/CodSpeedHQ/codspeed-rust/pull/4
feat: add AsyncBencher support by @art049 in https://github.com/CodSpeedHQ/codspeed-rust/pull/7
feat!: add warmup runs by @art049 in https://github.com/CodSpeedHQ/codspeed-rust/pull/5

Internals

chore: bump criterion by @art049 in https://github.com/CodSpeedHQ/codspeed-rust/pull/8

Full Changelog: CodSpeedHQ/codspeed-rust@v1.1.0...v2.0.0

Configuration

📅 Schedule: Branch creation - At any time (no schedule defined), Automerge - At any time (no schedule defined).

🚦 Automerge: Disabled by config. Please merge this manually once you are satisfied.

♻ Rebasing: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox.

🔕 Ignore: Close this PR and you won't be reminded about this update again.

If you want to rebase/retry this PR, check this box

This PR has been generated by Mend Renovate. View repository job log here.

samueltardieu · 2023-09-22T14:32:11Z

bors r+

codspeed-hq · 2023-09-22T14:36:32Z

CodSpeed Performance Report

Merging #443 will degrade performances by 25.37%

_{Comparing renovate/codspeed-criterion-compat-2.x (e434dbf) with main (87e130f)}

🎉 Hooray! `codspeed-rust` just leveled up to 2.2.0!

A heads-up, this is a breaking change and it might affect your current performance baseline a bit. But here's the exciting part - it's packed with new, cool features and promises improved result stability 🥳!
Curious about what's new? Visit our releases page to delve into all the awesome details about this new version.

Summary

⚡ 9 improvements
❌ 9 regressions
✅ 14 untouched benchmarks

⚠️ Please fix the performance issues or acknowledge them on CodSpeed.

Benchmarks breakdown

	Benchmark	`main`	`renovate/codspeed-criterion-compat-2.x`	Change
⚡	`fill-corner_to_corner_bfs`	6.5 ms	5.6 ms	+15.6%
❌	`no_path_bfs`	5.7 ms	6.2 ms	-8%
⚡	`corner_to_corner_astar`	432.7 µs	420.1 µs	+3.01%
⚡	`corner_to_corner_bfs`	6.1 ms	6 ms	+2.13%
⚡	`fill-no_path_astar`	8.3 ms	7 ms	+18.75%
⚡	`corner_to_corner_idastar`	628.8 µs	589.8 µs	+6.61%
❌	`fill-corner_to_corner_iddfs`	24.4 ms	26 ms	-6.24%
❌	`no_path_dijkstra`	7.6 ms	7.8 ms	-3.27%
❌	`no_path_fringe`	11.6 ms	11.8 ms	-2.14%
⚡	`fill-corner_to_corner_dijkstra`	7.8 ms	7.3 ms	+6.19%
❌	`fill-corner_to_corner_fringe`	495.6 µs	664.1 µs	-25.37%
⚡	`fill-no_path_fringe`	7.7 ms	7.2 ms	+6.29%
❌	`separate_components`	42.2 ms	44 ms	-4.04%
❌	`fill-no_path_dijkstra`	6.8 ms	7.3 ms	-7.29%
❌	`arena`	249.8 ms	256 ms	-2.44%
⚡	`fill-corner_to_corner_idastar`	576.8 µs	557.7 µs	+3.42%
❌	`fill-corner_to_corner_astar`	546.9 µs	639.7 µs	-14.5%
⚡	`fill-no_path_bfs`	6.8 ms	5.6 ms	+20.89%

bors · 2023-09-22T14:43:35Z

Synchronization error!

samueltardieu · 2023-09-22T15:06:46Z

bors r+

440: chore(deps): update pre-commit/action action to v3 r=samueltardieu a=renovate[bot] [![Mend Renovate](https://app.renovatebot.com/images/banner.svg)](https://renovatebot.com) This PR contains the following updates: | Package | Type | Update | Change | |---|---|---|---| | [pre-commit/action](https://togithub.com/pre-commit/action) | action | major | `v2.0.3` -> `v3.0.0` | --- ### Release Notes <details> <summary>pre-commit/action (pre-commit/action)</summary> ### [`v3.0.0`](https://togithub.com/pre-commit/action/releases/tag/v3.0.0): pre-commit/action@v3.0.0 [Compare Source](https://togithub.com/pre-commit/action/compare/v2.0.3...v3.0.0) ##### Breaking - remove pushing behaviour. - PR [#164](https://togithub.com/pre-commit/action/issues/164) by [`@asottile](https://togithub.com/asottile).` see [README] for alternatives [README]: https://togithub.com/pre-commit/action#using-this-action-in-private-repositories </details> --- ### Configuration 📅 **Schedule**: Branch creation - At any time (no schedule defined), Automerge - At any time (no schedule defined). 🚦 **Automerge**: Disabled by config. Please merge this manually once you are satisfied. ♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox. 🔕 **Ignore**: Close this PR and you won't be reminded about this update again. --- - [ ] If you want to rebase/retry this PR, check this box --- This PR has been generated by [Mend Renovate](https://www.mend.io/free-developer-tools/renovate/). View repository job log [here](https://developer.mend.io/github/samueltardieu/pathfinding).  443: chore(deps): update rust crate codspeed-criterion-compat to v2 r=samueltardieu a=renovate[bot] [![Mend Renovate](https://app.renovatebot.com/images/banner.svg)](https://renovatebot.com) This PR contains the following updates: | Package | Type | Update | Change | |---|---|---|---| | [codspeed-criterion-compat](https://codspeed.io) ([source](https://togithub.com/CodSpeedHQ/codspeed-rust)) | dev-dependencies | major | `1.1.0` -> `2.2.0` | --- ### Release Notes <details> <summary>CodSpeedHQ/codspeed-rust (codspeed-criterion-compat)</summary> ### [`v2.2.0`](https://togithub.com/CodSpeedHQ/codspeed-rust/releases/tag/v2.2.0) [Compare Source](https://togithub.com/CodSpeedHQ/codspeed-rust/compare/v2.1.0...v2.2.0) #### What's Changed It's now possible to disable `codspeed_criterion_compat` default features. ##### Details - fix: allow disabling criterion default features by [`@art049](https://togithub.com/art049)` in [https://github.com/CodSpeedHQ/codspeed-rust/pull/12](https://togithub.com/CodSpeedHQ/codspeed-rust/pull/12) **Full Changelog**: CodSpeedHQ/codspeed-rust@v2.1.0...v2.2.0 ### [`v2.1.0`](https://togithub.com/CodSpeedHQ/codspeed-rust/releases/tag/v2.1.0) [Compare Source](https://togithub.com/CodSpeedHQ/codspeed-rust/compare/v2.0.0...v2.1.0) #### 🎉 What's Changed - Relative paths are now properly handled when using the `working-directory` action parameter. #### 📚 Details - fix: fix relative path when using working-directory by [`@art049](https://togithub.com/art049)` in [https://github.com/CodSpeedHQ/codspeed-rust/pull/9](https://togithub.com/CodSpeedHQ/codspeed-rust/pull/9) **Full Changelog**: CodSpeedHQ/codspeed-rust@v2.0.0...v2.1.0 ### [`v2.0.0`](https://togithub.com/CodSpeedHQ/codspeed-rust/releases/tag/v2.0.0) [Compare Source](https://togithub.com/CodSpeedHQ/codspeed-rust/compare/codspeed-criterion-compat@1.1.0...v2.0.0) #### 🎉 What's Changed - Each benchmark is warmed up before each run to reduce the flakiness and the side effects related to the order in which the benchmarks are run. - `AsyncBencher` is now supported with the `criterion` compatibility layer. - Debug symbols are now generated during the build of the benchmarks, allowing more granularity in the performance reports and detailed profiling. More details can be found in [the documentation](https://docs.codspeed.io/features/trace-generation). #### 🚀 Migration Path This is a **breaking change** and might affect your current performance baseline a bit. But here's the exciting part - it's packed with new, cool features and promises improved result stability 🎉! In some cases, the warmup might optimize out the benchmark. In that case, adding `black_box` should help, also don't hesitate to open an issue so we can have a look and document the behavior. We recommend you create a standalone PR to update the package, acknowledge the potential regressions, and merge it to update the baseline on your default branch. #### 📚 Details ##### Features - feat: add debug symbols in the benchmark build config by [`@art049](https://togithub.com/art049)` in [https://github.com/CodSpeedHQ/codspeed-rust/pull/4](https://togithub.com/CodSpeedHQ/codspeed-rust/pull/4) - feat: add AsyncBencher support by [`@art049](https://togithub.com/art049)` in [https://github.com/CodSpeedHQ/codspeed-rust/pull/7](https://togithub.com/CodSpeedHQ/codspeed-rust/pull/7) - feat!: add warmup runs by [`@art049](https://togithub.com/art049)` in [https://github.com/CodSpeedHQ/codspeed-rust/pull/5](https://togithub.com/CodSpeedHQ/codspeed-rust/pull/5) ##### Internals - chore: bump criterion by [`@art049](https://togithub.com/art049)` in [https://github.com/CodSpeedHQ/codspeed-rust/pull/8](https://togithub.com/CodSpeedHQ/codspeed-rust/pull/8) **Full Changelog**: CodSpeedHQ/codspeed-rust@v1.1.0...v2.0.0 </details> --- ### Configuration 📅 **Schedule**: Branch creation - At any time (no schedule defined), Automerge - At any time (no schedule defined). 🚦 **Automerge**: Disabled by config. Please merge this manually once you are satisfied. ♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox. 🔕 **Ignore**: Close this PR and you won't be reminded about this update again. --- - [ ] If you want to rebase/retry this PR, check this box --- This PR has been generated by [Mend Renovate](https://www.mend.io/free-developer-tools/renovate/). View repository job log [here](https://developer.mend.io/github/samueltardieu/pathfinding).  Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>

bors · 2023-09-22T15:11:31Z

Build failed (retrying...):

Test suite (1.65.0)

443: chore(deps): update rust crate codspeed-criterion-compat to v2 r=samueltardieu a=renovate[bot] [![Mend Renovate](https://app.renovatebot.com/images/banner.svg)](https://renovatebot.com) This PR contains the following updates: | Package | Type | Update | Change | |---|---|---|---| | [codspeed-criterion-compat](https://codspeed.io) ([source](https://togithub.com/CodSpeedHQ/codspeed-rust)) | dev-dependencies | major | `1.1.0` -> `2.2.0` | --- ### Release Notes <details> <summary>CodSpeedHQ/codspeed-rust (codspeed-criterion-compat)</summary> ### [`v2.2.0`](https://togithub.com/CodSpeedHQ/codspeed-rust/releases/tag/v2.2.0) [Compare Source](https://togithub.com/CodSpeedHQ/codspeed-rust/compare/v2.1.0...v2.2.0) #### What's Changed It's now possible to disable `codspeed_criterion_compat` default features. ##### Details - fix: allow disabling criterion default features by [`@art049](https://togithub.com/art049)` in [https://github.com/CodSpeedHQ/codspeed-rust/pull/12](https://togithub.com/CodSpeedHQ/codspeed-rust/pull/12) **Full Changelog**: CodSpeedHQ/codspeed-rust@v2.1.0...v2.2.0 ### [`v2.1.0`](https://togithub.com/CodSpeedHQ/codspeed-rust/releases/tag/v2.1.0) [Compare Source](https://togithub.com/CodSpeedHQ/codspeed-rust/compare/v2.0.0...v2.1.0) #### 🎉 What's Changed - Relative paths are now properly handled when using the `working-directory` action parameter. #### 📚 Details - fix: fix relative path when using working-directory by [`@art049](https://togithub.com/art049)` in [https://github.com/CodSpeedHQ/codspeed-rust/pull/9](https://togithub.com/CodSpeedHQ/codspeed-rust/pull/9) **Full Changelog**: CodSpeedHQ/codspeed-rust@v2.0.0...v2.1.0 ### [`v2.0.0`](https://togithub.com/CodSpeedHQ/codspeed-rust/releases/tag/v2.0.0) [Compare Source](https://togithub.com/CodSpeedHQ/codspeed-rust/compare/codspeed-criterion-compat@1.1.0...v2.0.0) #### 🎉 What's Changed - Each benchmark is warmed up before each run to reduce the flakiness and the side effects related to the order in which the benchmarks are run. - `AsyncBencher` is now supported with the `criterion` compatibility layer. - Debug symbols are now generated during the build of the benchmarks, allowing more granularity in the performance reports and detailed profiling. More details can be found in [the documentation](https://docs.codspeed.io/features/trace-generation). #### 🚀 Migration Path This is a **breaking change** and might affect your current performance baseline a bit. But here's the exciting part - it's packed with new, cool features and promises improved result stability 🎉! In some cases, the warmup might optimize out the benchmark. In that case, adding `black_box` should help, also don't hesitate to open an issue so we can have a look and document the behavior. We recommend you create a standalone PR to update the package, acknowledge the potential regressions, and merge it to update the baseline on your default branch. #### 📚 Details ##### Features - feat: add debug symbols in the benchmark build config by [`@art049](https://togithub.com/art049)` in [https://github.com/CodSpeedHQ/codspeed-rust/pull/4](https://togithub.com/CodSpeedHQ/codspeed-rust/pull/4) - feat: add AsyncBencher support by [`@art049](https://togithub.com/art049)` in [https://github.com/CodSpeedHQ/codspeed-rust/pull/7](https://togithub.com/CodSpeedHQ/codspeed-rust/pull/7) - feat!: add warmup runs by [`@art049](https://togithub.com/art049)` in [https://github.com/CodSpeedHQ/codspeed-rust/pull/5](https://togithub.com/CodSpeedHQ/codspeed-rust/pull/5) ##### Internals - chore: bump criterion by [`@art049](https://togithub.com/art049)` in [https://github.com/CodSpeedHQ/codspeed-rust/pull/8](https://togithub.com/CodSpeedHQ/codspeed-rust/pull/8) **Full Changelog**: CodSpeedHQ/codspeed-rust@v1.1.0...v2.0.0 </details> --- ### Configuration 📅 **Schedule**: Branch creation - At any time (no schedule defined), Automerge - At any time (no schedule defined). 🚦 **Automerge**: Disabled by config. Please merge this manually once you are satisfied. ♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox. 🔕 **Ignore**: Close this PR and you won't be reminded about this update again. --- - [ ] If you want to rebase/retry this PR, check this box --- This PR has been generated by [Mend Renovate](https://www.mend.io/free-developer-tools/renovate/). View repository job log [here](https://developer.mend.io/github/samueltardieu/pathfinding).  Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>

bors · 2023-09-22T15:15:24Z

Canceled.

samueltardieu · 2023-09-22T15:25:36Z

bors r+

443: chore(deps): update rust crate codspeed-criterion-compat to v2 r=samueltardieu a=renovate[bot] [![Mend Renovate](https://app.renovatebot.com/images/banner.svg)](https://renovatebot.com) This PR contains the following updates: | Package | Type | Update | Change | |---|---|---|---| | [codspeed-criterion-compat](https://codspeed.io) ([source](https://togithub.com/CodSpeedHQ/codspeed-rust)) | dev-dependencies | major | `1.1.0` -> `2.2.0` | --- ### Release Notes <details> <summary>CodSpeedHQ/codspeed-rust (codspeed-criterion-compat)</summary> ### [`v2.2.0`](https://togithub.com/CodSpeedHQ/codspeed-rust/releases/tag/v2.2.0) [Compare Source](https://togithub.com/CodSpeedHQ/codspeed-rust/compare/v2.1.0...v2.2.0) #### What's Changed It's now possible to disable `codspeed_criterion_compat` default features. ##### Details - fix: allow disabling criterion default features by [`@art049](https://togithub.com/art049)` in [https://github.com/CodSpeedHQ/codspeed-rust/pull/12](https://togithub.com/CodSpeedHQ/codspeed-rust/pull/12) **Full Changelog**: CodSpeedHQ/codspeed-rust@v2.1.0...v2.2.0 ### [`v2.1.0`](https://togithub.com/CodSpeedHQ/codspeed-rust/releases/tag/v2.1.0) [Compare Source](https://togithub.com/CodSpeedHQ/codspeed-rust/compare/v2.0.0...v2.1.0) #### 🎉 What's Changed - Relative paths are now properly handled when using the `working-directory` action parameter. #### 📚 Details - fix: fix relative path when using working-directory by [`@art049](https://togithub.com/art049)` in [https://github.com/CodSpeedHQ/codspeed-rust/pull/9](https://togithub.com/CodSpeedHQ/codspeed-rust/pull/9) **Full Changelog**: CodSpeedHQ/codspeed-rust@v2.0.0...v2.1.0 ### [`v2.0.0`](https://togithub.com/CodSpeedHQ/codspeed-rust/releases/tag/v2.0.0) [Compare Source](https://togithub.com/CodSpeedHQ/codspeed-rust/compare/codspeed-criterion-compat@1.1.0...v2.0.0) #### 🎉 What's Changed - Each benchmark is warmed up before each run to reduce the flakiness and the side effects related to the order in which the benchmarks are run. - `AsyncBencher` is now supported with the `criterion` compatibility layer. - Debug symbols are now generated during the build of the benchmarks, allowing more granularity in the performance reports and detailed profiling. More details can be found in [the documentation](https://docs.codspeed.io/features/trace-generation). #### 🚀 Migration Path This is a **breaking change** and might affect your current performance baseline a bit. But here's the exciting part - it's packed with new, cool features and promises improved result stability 🎉! In some cases, the warmup might optimize out the benchmark. In that case, adding `black_box` should help, also don't hesitate to open an issue so we can have a look and document the behavior. We recommend you create a standalone PR to update the package, acknowledge the potential regressions, and merge it to update the baseline on your default branch. #### 📚 Details ##### Features - feat: add debug symbols in the benchmark build config by [`@art049](https://togithub.com/art049)` in [https://github.com/CodSpeedHQ/codspeed-rust/pull/4](https://togithub.com/CodSpeedHQ/codspeed-rust/pull/4) - feat: add AsyncBencher support by [`@art049](https://togithub.com/art049)` in [https://github.com/CodSpeedHQ/codspeed-rust/pull/7](https://togithub.com/CodSpeedHQ/codspeed-rust/pull/7) - feat!: add warmup runs by [`@art049](https://togithub.com/art049)` in [https://github.com/CodSpeedHQ/codspeed-rust/pull/5](https://togithub.com/CodSpeedHQ/codspeed-rust/pull/5) ##### Internals - chore: bump criterion by [`@art049](https://togithub.com/art049)` in [https://github.com/CodSpeedHQ/codspeed-rust/pull/8](https://togithub.com/CodSpeedHQ/codspeed-rust/pull/8) **Full Changelog**: CodSpeedHQ/codspeed-rust@v1.1.0...v2.0.0 </details> --- ### Configuration 📅 **Schedule**: Branch creation - At any time (no schedule defined), Automerge - At any time (no schedule defined). 🚦 **Automerge**: Disabled by config. Please merge this manually once you are satisfied. ♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox. 🔕 **Ignore**: Close this PR and you won't be reminded about this update again. --- - [ ] If you want to rebase/retry this PR, check this box --- This PR has been generated by [Mend Renovate](https://www.mend.io/free-developer-tools/renovate/). View repository job log [here](https://developer.mend.io/github/samueltardieu/pathfinding).  Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>

bors · 2023-09-22T15:29:06Z

Canceled.

renovate · 2023-09-22T15:34:07Z

Renovate Ignore Notification

Because you closed this PR without merging, Renovate will ignore this update. You will not get PRs for any future 2.x releases. But if you manually upgrade to 2.x then Renovate will re-enable minor and patch updates automatically.

If you accidentally closed this PR, or if you changed your mind: rename this PR to get a fresh replacement PR.

renovate bot force-pushed the renovate/codspeed-criterion-compat-2.x branch from 6f8aac9 to 6145c60 Compare September 22, 2023 14:43

renovate bot force-pushed the renovate/codspeed-criterion-compat-2.x branch from 6145c60 to 6e36b25 Compare September 22, 2023 15:15

chore(deps): update rust crate codspeed-criterion-compat to v2

e434dbf

renovate bot force-pushed the renovate/codspeed-criterion-compat-2.x branch from 6e36b25 to e434dbf Compare September 22, 2023 15:29

samueltardieu closed this Sep 22, 2023

renovate bot deleted the renovate/codspeed-criterion-compat-2.x branch September 22, 2023 15:34

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

chore(deps): update rust crate codspeed-criterion-compat to v2#443

chore(deps): update rust crate codspeed-criterion-compat to v2#443
renovate[bot] wants to merge 1 commit intomainfrom
renovate/codspeed-criterion-compat-2.x

renovate bot commented Sep 22, 2023

Uh oh!

samueltardieu commented Sep 22, 2023

Uh oh!

codspeed-hq bot commented Sep 22, 2023 •

edited

Loading

Uh oh!

bors bot commented Sep 22, 2023

Uh oh!

samueltardieu commented Sep 22, 2023

Uh oh!

bors bot commented Sep 22, 2023

Uh oh!

bors bot commented Sep 22, 2023

Uh oh!

samueltardieu commented Sep 22, 2023

Uh oh!

bors bot commented Sep 22, 2023

Uh oh!

renovate bot commented Sep 22, 2023

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

1 participant

Conversation

renovate bot commented Sep 22, 2023

Release Notes

v2.2.0

What's Changed

Details

v2.1.0

🎉 What's Changed

📚 Details

v2.0.0

🎉 What's Changed

🚀 Migration Path

📚 Details

Features

Internals

Configuration

Uh oh!

samueltardieu commented Sep 22, 2023

Uh oh!

codspeed-hq bot commented Sep 22, 2023 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

CodSpeed Performance Report

Merging #443 will degrade performances by 25.37%

🎉 Hooray! codspeed-rust just leveled up to 2.2.0!

Summary

Benchmarks breakdown

Uh oh!

bors bot commented Sep 22, 2023

Uh oh!

samueltardieu commented Sep 22, 2023

Uh oh!

bors bot commented Sep 22, 2023

Uh oh!

bors bot commented Sep 22, 2023

Uh oh!

samueltardieu commented Sep 22, 2023

Uh oh!

bors bot commented Sep 22, 2023

Uh oh!

renovate bot commented Sep 22, 2023

Renovate Ignore Notification

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

1 participant

`v2.2.0`

`v2.1.0`

`v2.0.0`

codspeed-hq bot commented Sep 22, 2023 •

edited

Loading

🎉 Hooray! `codspeed-rust` just leveled up to 2.2.0!