wenxu says:

====================
several fixes for indirect flow_blocks offload

v2:
patch2: store the cb_priv of representor to the flow_block_cb->indr.cb_priv
in the driver. And make the correct check with the statments
this->indr.cb_priv == cb_priv

patch4: del the driver list only in the indriect cleanup callbacks

v3:
add the cover letter and changlogs.

v4:
collapsed 1/4, 2/4, 4/4 in v3 to one fix
Add the prepare patch 1 and 2

v5:
patch1: place flow_indr_block_cb_alloc() right before
flow_indr_dev_setup_offload() to avoid moving flow_block_indr_init()

This series fixes commit 1fac52d ("net: flow_offload: consolidate
indirect flow_block infrastructure") that revists the flow_block
infrastructure.

patch #1 #2: prepare for fix patch #3
add and use flow_indr_block_cb_alloc/remove function

patch #3: fix flow_indr_dev_unregister path
If the representor is removed, then identify the indirect flow_blocks
that need to be removed by the release callback and the port representor
structure. To identify the port representor structure, a new
indr.cb_priv field needs to be introduced. The flow_block also needs to
be removed from the driver list from the cleanup path

patch#4 fix block->nooffloaddevcnt warning dmesg log.
When a indr device add in offload success. The block->nooffloaddevcnt
should be 0. After the representor go away. When the dir device go away
the flow_block UNBIND operation with -EOPNOTSUPP which lead the warning
demesg log.
The block->nooffloaddevcnt should always count for indr block.
even the indr block offload successful. The representor maybe
gone away and the ingress qdisc can work in software mode.
====================

Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 7e9f5e6 ("arm64: vdso: Add --eh-frame-hdr to ldflags") results
in a .eh_frame_hdr section for the vDSO, which in turn causes the libgcc
unwinder to unwind out of signal handlers using the .eh_frame information
populated by our .cfi directives. In conjunction with a4eb355
("arm64: vdso: Fix CFI directives in sigreturn trampoline"), this has
been shown to cause segmentation faults originating from within the
unwinder during thread cancellation:

 | Thread 14 "virtio-net-rx" received signal SIGSEGV, Segmentation fault.
 | 0x0000000000435e24 in uw_frame_state_for ()
 | (gdb) bt
 | #0  0x0000000000435e24 in uw_frame_state_for ()
 | #1  0x0000000000436e88 in _Unwind_ForcedUnwind_Phase2 ()
 | #2  0x00000000004374d8 in _Unwind_ForcedUnwind ()
 | #3  0x0000000000428400 in __pthread_unwind (buf=<optimized out>) at unwind.c:121
 | #4  0x0000000000429808 in __do_cancel () at ./pthreadP.h:304
 | #5  sigcancel_handler (sig=32, si=0xffff33c743f0, ctx=<optimized out>) at nptl-init.c:200
 | thesofproject#6  sigcancel_handler (sig=<optimized out>, si=0xffff33c743f0, ctx=<optimized out>) at nptl-init.c:165
 | thesofproject#7  <signal handler called>
 | thesofproject#8  futex_wait_cancelable (private=0, expected=0, futex_word=0x3890b708) at ../sysdeps/unix/sysv/linux/futex-internal.h:88

After considerable bashing of heads, it appears that our CFI directives
for unwinding out of the sigreturn trampoline are only processed by libgcc
when both a .eh_frame_hdr section is present *and* the mysterious NOP is
covered by an entry in .eh_frame. With both of these now in place, it has
highlighted that our CFI directives are not comprehensive enough to
restore the stack pointer of the interrupted context. This results in libgcc
falling back to an arm64-specific unwinder after computing a bogus PC value
from the unwind tables. The unwinder promptly dereferences this bogus address
in an attempt to see if the pointed-to instruction sequence looks like
the sigreturn trampoline.

Restore the old unwind behaviour, which relied solely on heuristics in
the unwinder, by removing the .eh_frame_hdr section from the vDSO and
commenting out the insufficient CFI directives for now. Add comments to
explain the current, miserable state of affairs.

Cc: Tamas Zsoldos <tamas.zsoldos@arm.com>
Cc: Szabolcs Nagy <szabolcs.nagy@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Daniel Kiss <daniel.kiss@arm.com>
Acked-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reported-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>

The mpath disk node takes a reference on the request mpath
request queue when adding live path to the mpath gendisk.
However if we connected to an inaccessible path device_add_disk
is not called, so if we disconnect and remove the mpath gendisk
we endup putting an reference on the request queue that was
never taken [1].

Fix that to check if we ever added a live path (using
NVME_NS_HEAD_HAS_DISK flag) and if not, clear the disk->queue
reference.

[1]:
------------[ cut here ]------------
refcount_t: underflow; use-after-free.
WARNING: CPU: 1 PID: 1372 at lib/refcount.c:28 refcount_warn_saturate+0xa6/0xf0
CPU: 1 PID: 1372 Comm: nvme Tainted: G           O      5.7.0-rc2+ #3
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1 04/01/2014
RIP: 0010:refcount_warn_saturate+0xa6/0xf0
RSP: 0018:ffffb29e8053bdc0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff8b7a2f4fc060 RCX: 0000000000000007
RDX: 0000000000000007 RSI: 0000000000000092 RDI: ffff8b7a3ec99980
RBP: ffff8b7a2f4fc000 R08: 00000000000002e1 R09: 0000000000000004
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
R13: fffffffffffffff2 R14: ffffb29e8053bf08 R15: ffff8b7a320e2da0
FS:  00007f135d4ca800(0000) GS:ffff8b7a3ec80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005651178c0c30 CR3: 000000003b650005 CR4: 0000000000360ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 disk_release+0xa2/0xc0
 device_release+0x28/0x80
 kobject_put+0xa5/0x1b0
 nvme_put_ns_head+0x26/0x70 [nvme_core]
 nvme_put_ns+0x30/0x60 [nvme_core]
 nvme_remove_namespaces+0x9b/0xe0 [nvme_core]
 nvme_do_delete_ctrl+0x43/0x5c [nvme_core]
 nvme_sysfs_delete.cold+0x8/0xd [nvme_core]
 kernfs_fop_write+0xc1/0x1a0
 vfs_write+0xb6/0x1a0
 ksys_write+0x5f/0xe0
 do_syscall_64+0x52/0x1a0
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reported-by: Anton Eidelman <anton@lightbitslabs.com>
Tested-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Use preempt_disable() to fix the following bug under CONFIG_DEBUG_PREEMPT.

[   21.915305] BUG: using smp_processor_id() in preemptible [00000000] code: qemu-system-mip/1056
[   21.923996] caller is do_ri+0x1d4/0x690
[   21.927921] CPU: 0 PID: 1056 Comm: qemu-system-mip Not tainted 5.8.0-rc2 #3
[   21.934913] Stack : 0000000000000001 ffffffff81370000 ffffffff8071cd60 a80f926d5ac95694
[   21.942984]         a80f926d5ac95694 0000000000000000 98000007f0043c88 ffffffff80f2fe40
[   21.951054]         0000000000000000 0000000000000000 0000000000000001 0000000000000000
[   21.959123]         ffffffff802d60cc 98000007f0043dd8 ffffffff81f4b1e8 ffffffff81f60000
[   21.967192]         ffffffff81f60000 ffffffff80fe0000 ffff000000000000 0000000000000000
[   21.975261]         fffffffff500cce1 0000000000000001 0000000000000002 0000000000000000
[   21.983331]         ffffffff80fe1a40 0000000000000006 ffffffff8077f940 0000000000000000
[   21.991401]         ffffffff81460000 98000007f0040000 98000007f0043c80 000000fffba8cf20
[   21.999471]         ffffffff8071cd60 0000000000000000 0000000000000000 0000000000000000
[   22.007541]         0000000000000000 0000000000000000 ffffffff80212ab4 a80f926d5ac95694
[   22.015610]         ...
[   22.018086] Call Trace:
[   22.020562] [<ffffffff80212ab4>] show_stack+0xa4/0x138
[   22.025732] [<ffffffff8071cd60>] dump_stack+0xf0/0x150
[   22.030903] [<ffffffff80c73f5c>] check_preemption_disabled+0xf4/0x100
[   22.037375] [<ffffffff80213b84>] do_ri+0x1d4/0x690
[   22.042198] [<ffffffff8020b828>] handle_ri_int+0x44/0x5c
[   24.359386] BUG: using smp_processor_id() in preemptible [00000000] code: qemu-system-mip/1072
[   24.368204] caller is do_ri+0x1a8/0x690
[   24.372169] CPU: 4 PID: 1072 Comm: qemu-system-mip Not tainted 5.8.0-rc2 #3
[   24.379170] Stack : 0000000000000001 ffffffff81370000 ffffffff8071cd60 a80f926d5ac95694
[   24.387246]         a80f926d5ac95694 0000000000000000 98001007ef06bc88 ffffffff80f2fe40
[   24.395318]         0000000000000000 0000000000000000 0000000000000001 0000000000000000
[   24.403389]         ffffffff802d60cc 98001007ef06bdd8 ffffffff81f4b818 ffffffff81f60000
[   24.411461]         ffffffff81f60000 ffffffff80fe0000 ffff000000000000 0000000000000000
[   24.419533]         fffffffff500cce1 0000000000000001 0000000000000002 0000000000000000
[   24.427603]         ffffffff80fe0000 0000000000000006 ffffffff8077f940 0000000000000020
[   24.435673]         ffffffff81460020 98001007ef068000 98001007ef06bc80 000000fffbbbb370
[   24.443745]         ffffffff8071cd60 0000000000000000 0000000000000000 0000000000000000
[   24.451816]         0000000000000000 0000000000000000 ffffffff80212ab4 a80f926d5ac95694
[   24.459887]         ...
[   24.462367] Call Trace:
[   24.464846] [<ffffffff80212ab4>] show_stack+0xa4/0x138
[   24.470029] [<ffffffff8071cd60>] dump_stack+0xf0/0x150
[   24.475208] [<ffffffff80c73f5c>] check_preemption_disabled+0xf4/0x100
[   24.481682] [<ffffffff80213b58>] do_ri+0x1a8/0x690
[   24.486509] [<ffffffff8020b828>] handle_ri_int+0x44/0x5c

Signed-off-by: Xingxing Su <suxingxing@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Currently, if a bpf program has more than one subprograms, each program will be
jitted separately. For programs with bpf-to-bpf calls the
prog->aux->num_exentries is not setup properly. For example, with
bpf_iter_netlink.c modified to force one function to be not inlined and with
CONFIG_BPF_JIT_ALWAYS_ON the following error is seen:
   $ ./test_progs -n 3/3
   ...
   libbpf: failed to load program 'iter/netlink'
   libbpf: failed to load object 'bpf_iter_netlink'
   libbpf: failed to load BPF skeleton 'bpf_iter_netlink': -4007
   test_netlink:FAIL:bpf_iter_netlink__open_and_load skeleton open_and_load failed
   #3/3 netlink:FAIL
The dmesg shows the following errors:
   ex gen bug
which is triggered by the following code in arch/x86/net/bpf_jit_comp.c:
   if (excnt >= bpf_prog->aux->num_exentries) {
     pr_err("ex gen bug\n");
     return -EFAULT;
   }

This patch fixes the issue by computing proper num_exentries for each
subprogram before calling JIT.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Jakub Sitnicki says:

====================
This patch set prepares ground for link-based multi-prog attachment for
future netns attach types, with BPF_SK_LOOKUP attach type in mind [0].

Two changes are needed in order to attach and run a series of BPF programs:

  1) an bpf_prog_array of programs to run (patch #2), and
  2) a list of attached links to keep track of attachments (patch #3).

Nothing changes for BPF flow_dissector. Just as before only one program can
be attached to netns.

In v3 I've simplified patch #2 that introduces bpf_prog_array to take
advantage of the fact that it will hold at most one program for now.

In particular, I'm no longer using bpf_prog_array_copy. It turned out to be
less suitable for link operations than I thought as it fails to append the
same BPF program.

bpf_prog_array_replace_item is also gone, because we know we always want to
replace the first element in prog_array.

Naturally the code that handles bpf_prog_array will need change once
more when there is a program type that allows multi-prog attachment. But I
feel it will be better to do it gradually and present it together with
tests that actually exercise multi-prog code paths.

[0] https://lore.kernel.org/bpf/20200511185218.1422406-1-jakub@cloudflare.com/

v2 -> v3:
- Don't check if run_array is null in link update callback. (Martin)
- Allow updating the link with the same BPF program. (Andrii)
- Add patch #4 with a test for the above case.
- Kill bpf_prog_array_replace_item. Access the run_array directly.
- Switch from bpf_prog_array_copy() to bpf_prog_array_alloc(1, ...).
- Replace rcu_deref_protected & RCU_INIT_POINTER with rcu_replace_pointer.
- Drop Andrii's Ack from patch #2. Code changed.

v1 -> v2:

- Show with a (void) cast that bpf_prog_array_replace_item() return value
  is ignored on purpose. (Andrii)
- Explain why bpf-cgroup cannot replace programs in bpf_prog_array based
  on bpf_prog pointer comparison in patch #2 description. (Andrii)
====================

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

…kernel/git/kvmarm/kvmarm into kvm-master

KVM/arm fixes for 5.8, take #3

- Disable preemption on context-switching PMU EL0 state happening
  on system register trap
- Don't clobber X0 when tearing down KVM via a soft reset (kexec)

devm_gpiod_get_index() doesn't return NULL but -ENOENT when the
requested GPIO doesn't exist,  leading to the following messages:

[    2.742468] gpiod_direction_input: invalid GPIO (errorpointer)
[    2.748147] can't set direction for gpio #2: -2
[    2.753081] gpiod_direction_input: invalid GPIO (errorpointer)
[    2.758724] can't set direction for gpio #3: -2
[    2.763666] gpiod_direction_output: invalid GPIO (errorpointer)
[    2.769394] can't set direction for gpio #4: -2
[    2.774341] gpiod_direction_input: invalid GPIO (errorpointer)
[    2.779981] can't set direction for gpio #5: -2
[    2.784545] ff000a20.serial: ttyCPM1 at MMIO 0xfff00a20 (irq = 39, base_baud = 8250000) is a CPM UART

Use devm_gpiod_get_index_optional() instead.

At the same time, handle the error case and properly exit
with an error.

Fixes: 97cbaf2 ("tty: serial: cpm_uart: Convert to use GPIO descriptors")
Cc: stable@vger.kernel.org
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/694a25fdce548c5ee8b060ef6a4b02746b8f25c0.1591986307.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The vfio_pci_release call will free and clear the error and request
eventfd ctx while these ctx could be in use at the same time in the
function like vfio_pci_request, and it's expected to protect them under
the vdev->igate mutex, which is missing in vfio_pci_release.

This issue is introduced since commit 1518ac2 ("vfio/pci: fix memory
leaks of eventfd ctx"),and since commit 5c5866c ("vfio/pci: Clear
error and request eventfd ctx after releasing"), it's very easily to
trigger the kernel panic like this:

[ 9513.904346] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
[ 9513.913091] Mem abort info:
[ 9513.915871]   ESR = 0x96000006
[ 9513.918912]   EC = 0x25: DABT (current EL), IL = 32 bits
[ 9513.924198]   SET = 0, FnV = 0
[ 9513.927238]   EA = 0, S1PTW = 0
[ 9513.930364] Data abort info:
[ 9513.933231]   ISV = 0, ISS = 0x00000006
[ 9513.937048]   CM = 0, WnR = 0
[ 9513.940003] user pgtable: 4k pages, 48-bit VAs, pgdp=0000007ec7d12000
[ 9513.946414] [0000000000000008] pgd=0000007ec7d13003, p4d=0000007ec7d13003, pud=0000007ec728c003, pmd=0000000000000000
[ 9513.956975] Internal error: Oops: 96000006 [#1] PREEMPT SMP
[ 9513.962521] Modules linked in: vfio_pci vfio_virqfd vfio_iommu_type1 vfio hclge hns3 hnae3 [last unloaded: vfio_pci]
[ 9513.972998] CPU: 4 PID: 1327 Comm: bash Tainted: G        W         5.8.0-rc4+ #3
[ 9513.980443] Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V3.B270.01 05/08/2020
[ 9513.989274] pstate: 80400089 (Nzcv daIf +PAN -UAO BTYPE=--)
[ 9513.994827] pc : _raw_spin_lock_irqsave+0x48/0x88
[ 9513.999515] lr : eventfd_signal+0x6c/0x1b0
[ 9514.003591] sp : ffff800038a0b960
[ 9514.006889] x29: ffff800038a0b960 x28: ffff007ef7f4da10
[ 9514.012175] x27: ffff207eefbbfc80 x26: ffffbb7903457000
[ 9514.017462] x25: ffffbb7912191000 x24: ffff007ef7f4d400
[ 9514.022747] x23: ffff20be6e0e4c00 x22: 0000000000000008
[ 9514.028033] x21: 0000000000000000 x20: 0000000000000000
[ 9514.033321] x19: 0000000000000008 x18: 0000000000000000
[ 9514.038606] x17: 0000000000000000 x16: ffffbb7910029328
[ 9514.043893] x15: 0000000000000000 x14: 0000000000000001
[ 9514.049179] x13: 0000000000000000 x12: 0000000000000002
[ 9514.054466] x11: 0000000000000000 x10: 0000000000000a00
[ 9514.059752] x9 : ffff800038a0b840 x8 : ffff007ef7f4de60
[ 9514.065038] x7 : ffff007fffc96690 x6 : fffffe01faffb748
[ 9514.070324] x5 : 0000000000000000 x4 : 0000000000000000
[ 9514.075609] x3 : 0000000000000000 x2 : 0000000000000001
[ 9514.080895] x1 : ffff007ef7f4d400 x0 : 0000000000000000
[ 9514.086181] Call trace:
[ 9514.088618]  _raw_spin_lock_irqsave+0x48/0x88
[ 9514.092954]  eventfd_signal+0x6c/0x1b0
[ 9514.096691]  vfio_pci_request+0x84/0xd0 [vfio_pci]
[ 9514.101464]  vfio_del_group_dev+0x150/0x290 [vfio]
[ 9514.106234]  vfio_pci_remove+0x30/0x128 [vfio_pci]
[ 9514.111007]  pci_device_remove+0x48/0x108
[ 9514.115001]  device_release_driver_internal+0x100/0x1b8
[ 9514.120200]  device_release_driver+0x28/0x38
[ 9514.124452]  pci_stop_bus_device+0x68/0xa8
[ 9514.128528]  pci_stop_and_remove_bus_device+0x20/0x38
[ 9514.133557]  pci_iov_remove_virtfn+0xb4/0x128
[ 9514.137893]  sriov_disable+0x3c/0x108
[ 9514.141538]  pci_disable_sriov+0x28/0x38
[ 9514.145445]  hns3_pci_sriov_configure+0x48/0xb8 [hns3]
[ 9514.150558]  sriov_numvfs_store+0x110/0x198
[ 9514.154724]  dev_attr_store+0x44/0x60
[ 9514.158373]  sysfs_kf_write+0x5c/0x78
[ 9514.162018]  kernfs_fop_write+0x104/0x210
[ 9514.166010]  __vfs_write+0x48/0x90
[ 9514.169395]  vfs_write+0xbc/0x1c0
[ 9514.172694]  ksys_write+0x74/0x100
[ 9514.176079]  __arm64_sys_write+0x24/0x30
[ 9514.179987]  el0_svc_common.constprop.4+0x110/0x200
[ 9514.184842]  do_el0_svc+0x34/0x98
[ 9514.188144]  el0_svc+0x14/0x40
[ 9514.191185]  el0_sync_handler+0xb0/0x2d0
[ 9514.195088]  el0_sync+0x140/0x180
[ 9514.198389] Code: b9001020 d2800000 52800022 f9800271 (885ffe61)
[ 9514.204455] ---[ end trace 648de00c8406465f ]---
[ 9514.212308] note: bash[1327] exited with preempt_count 1

Cc: Qian Cai <cai@lca.pw>
Cc: Alex Williamson <alex.williamson@redhat.com>
Fixes: 1518ac2 ("vfio/pci: fix memory leaks of eventfd ctx")
Signed-off-by: Zeng Tao <prime.zeng@hisilicon.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

The `INSN_CONFIG` comedi instruction with sub-instruction code
`INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is
used as a right shift amount for other bitmask values without being
checked.  Shift amounts greater than or equal to 32 will result in
undefined behavior.  Add code to deal with this.

Fixes: 33cdce6 ("staging: comedi: addi_apci_1032: conform to new INSN_CONFIG_DIGITAL_TRIG")
Cc: <stable@vger.kernel.org> #3.8+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20200717145257.112660-3-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The `INSN_CONFIG` comedi instruction with sub-instruction code
`INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is
used as a right shift amount for other bitmask values without being
checked.  Shift amounts greater than or equal to 32 will result in
undefined behavior.  Add code to deal with this.

Fixes: 1e15687 ("staging: comedi: addi_apci_1564: add Change-of-State interrupt subdevice and required functions")
Cc: <stable@vger.kernel.org> #3.17+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20200717145257.112660-4-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Stalls are quite frequent with recent kernels. I enabled
CONFIG_SOFTLOCKUP_DETECTOR and I caught the following stall:

watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [cc1:22803]
CPU: 0 PID: 22803 Comm: cc1 Not tainted 5.6.17+ #3
Hardware name: 9000/800/rp3440
 IAOQ[0]: d_alloc_parallel+0x384/0x688
 IAOQ[1]: d_alloc_parallel+0x388/0x688
 RP(r2): d_alloc_parallel+0x134/0x688
Backtrace:
 [<000000004036974c>] __lookup_slow+0xa4/0x200
 [<0000000040369fc8>] walk_component+0x288/0x458
 [<000000004036a9a0>] path_lookupat+0x88/0x198
 [<000000004036e748>] filename_lookup+0xa0/0x168
 [<000000004036e95c>] user_path_at_empty+0x64/0x80
 [<000000004035d93c>] vfs_statx+0x104/0x158
 [<000000004035dfcc>] __do_sys_lstat64+0x44/0x80
 [<000000004035e5a0>] sys_lstat64+0x20/0x38
 [<0000000040180054>] syscall_exit+0x0/0x14

The code was stuck in this loop in d_alloc_parallel:

    4037d414:   0e 00 10 dc     ldd 0(r16),ret0
    4037d418:   c7 fc 5f ed     bb,< ret0,1f,4037d414 <d_alloc_parallel+0x384>
    4037d41c:   08 00 02 40     nop

This is the inner loop of bit_spin_lock which is called by hlist_bl_unlock in
d_alloc_parallel:

static inline void bit_spin_lock(int bitnum, unsigned long *addr)
{
        /*
         * Assuming the lock is uncontended, this never enters
         * the body of the outer loop. If it is contended, then
         * within the inner loop a non-atomic test is used to
         * busywait with less bus contention for a good time to
         * attempt to acquire the lock bit.
         */
        preempt_disable();
#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
        while (unlikely(test_and_set_bit_lock(bitnum, addr))) {
                preempt_enable();
                do {
                        cpu_relax();
                } while (test_bit(bitnum, addr));
                preempt_disable();
        }
#endif
        __acquire(bitlock);
}

After consideration, I realized that we must be losing bit unlocks.
Then, I noticed that we missed defining atomic64_set_release().
Adding this define fixes the stalls in bit operations.

Signed-off-by: Dave Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>

Current code enables TCSR.TE and RCSR.RE together, and disable
TCSR.TE and RCSR.RE together in trigger(), which only supports
one operation mode：
1. Rx synchronous with Tx: TE is last enabled and first disabled

Other operation mode need to be considered also:
2. Tx synchronous with Rx: RE is last enabled and first disabled.
3. Asynchronous mode: Tx and Rx are independent.

So the enable TCSR.TE and RCSR.RE sequence and the disable
sequence need to be refined accordingly for #2 and #3.

There is slightly against what RM recommennds with this change.
For example in Rx synchronous with Tx mode, case "aplay 1.wav;
arecord 2.wav" enable TE before RE. But it should be safe to
do so, judging by years of testing results.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20200805063413.4610-2-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

…iu Wang <shengjiu.wang@nxp.com>:

refine and clean code for synchronous mode

Shengjiu Wang (3):
  ASoC: fsl_sai: Refine enable/disable TE/RE sequence in trigger()
  ASoC: fsl_sai: Drop TMR/RMR settings for synchronous mode
  ASoC: fsl_sai: Replace synchronous check with fsl_sai_dir_is_synced

changes in v3:
- Add reviewed-by Nicolin
- refine the commit log.
- Add one more patch #3

changes in v2:
- Split the commit
- refine the sequence in trigger stop

 sound/soc/fsl/fsl_sai.c | 173 +++++++++++++++++++++++-----------------
 1 file changed, 102 insertions(+), 71 deletions(-)

--
2.27.0

This reverts commit 61eee4a ("ALSA: hda: Add support for Loongson
7A1000 controller") to fix the following error on the Loongson LS7A
platform:

rcu: INFO: rcu_preempt self-detected stall on CPU
<SNIP>
NMI backtrace for cpu 0
CPU: 0 PID: 68 Comm: kworker/0:2 Not tainted 5.8.0+ #3
Hardware name:  , BIOS
Workqueue: events azx_probe_work [snd_hda_intel]
<SNIP>
Call Trace:
[<ffffffff80211a64>] show_stack+0x9c/0x130
[<ffffffff8065a740>] dump_stack+0xb0/0xf0
[<ffffffff80665774>] nmi_cpu_backtrace+0x134/0x140
[<ffffffff80665910>] nmi_trigger_cpumask_backtrace+0x190/0x200
[<ffffffff802b1abc>] rcu_dump_cpu_stacks+0x12c/0x190
[<ffffffff802b08cc>] rcu_sched_clock_irq+0xa2c/0xfc8
[<ffffffff802b91d4>] update_process_times+0x2c/0xb8
[<ffffffff802cad80>] tick_sched_timer+0x40/0xb8
[<ffffffff802ba5f0>] __hrtimer_run_queues+0x118/0x1d0
[<ffffffff802bab74>] hrtimer_interrupt+0x12c/0x2d8
[<ffffffff8021547c>] c0_compare_interrupt+0x74/0xa0
[<ffffffff80296bd0>] __handle_irq_event_percpu+0xa8/0x198
[<ffffffff80296cf0>] handle_irq_event_percpu+0x30/0x90
[<ffffffff8029d958>] handle_percpu_irq+0x88/0xb8
[<ffffffff80296124>] generic_handle_irq+0x44/0x60
[<ffffffff80b3cfd0>] do_IRQ+0x18/0x28
[<ffffffff8067ace4>] plat_irq_dispatch+0x64/0x100
[<ffffffff80209a20>] handle_int+0x140/0x14c
[<ffffffff802402e8>] irq_exit+0xf8/0x100

Because AZX_DRIVER_GENERIC can not work well for Loongson LS7A HDA
controller, it needs some workarounds which are not merged into the
upstream kernel at this time, so it should revert this patch now.

Fixes: 61eee4a ("ALSA: hda: Add support for Loongson 7A1000 controller")
Cc: <stable@vger.kernel.org> # 5.9-rc1+
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/1598348388-2518-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>

I got the following lockdep splat while testing:

  ======================================================
  WARNING: possible circular locking dependency detected
  5.8.0-rc7-00172-g021118712e59 thesofproject#932 Not tainted
  ------------------------------------------------------
  btrfs/229626 is trying to acquire lock:
  ffffffff828513f0 (cpu_hotplug_lock){++++}-{0:0}, at: alloc_workqueue+0x378/0x450

  but task is already holding lock:
  ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630

  which lock already depends on the new lock.

  the existing dependency chain (in reverse order) is:

  -> thesofproject#7 (&fs_info->scrub_lock){+.+.}-{3:3}:
	 __mutex_lock+0x9f/0x930
	 btrfs_scrub_dev+0x11c/0x630
	 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4
	 btrfs_ioctl+0x2799/0x30a0
	 ksys_ioctl+0x83/0xc0
	 __x64_sys_ioctl+0x16/0x20
	 do_syscall_64+0x50/0x90
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> thesofproject#6 (&fs_devs->device_list_mutex){+.+.}-{3:3}:
	 __mutex_lock+0x9f/0x930
	 btrfs_run_dev_stats+0x49/0x480
	 commit_cowonly_roots+0xb5/0x2a0
	 btrfs_commit_transaction+0x516/0xa60
	 sync_filesystem+0x6b/0x90
	 generic_shutdown_super+0x22/0x100
	 kill_anon_super+0xe/0x30
	 btrfs_kill_super+0x12/0x20
	 deactivate_locked_super+0x29/0x60
	 cleanup_mnt+0xb8/0x140
	 task_work_run+0x6d/0xb0
	 __prepare_exit_to_usermode+0x1cc/0x1e0
	 do_syscall_64+0x5c/0x90
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> #5 (&fs_info->tree_log_mutex){+.+.}-{3:3}:
	 __mutex_lock+0x9f/0x930
	 btrfs_commit_transaction+0x4bb/0xa60
	 sync_filesystem+0x6b/0x90
	 generic_shutdown_super+0x22/0x100
	 kill_anon_super+0xe/0x30
	 btrfs_kill_super+0x12/0x20
	 deactivate_locked_super+0x29/0x60
	 cleanup_mnt+0xb8/0x140
	 task_work_run+0x6d/0xb0
	 __prepare_exit_to_usermode+0x1cc/0x1e0
	 do_syscall_64+0x5c/0x90
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> #4 (&fs_info->reloc_mutex){+.+.}-{3:3}:
	 __mutex_lock+0x9f/0x930
	 btrfs_record_root_in_trans+0x43/0x70
	 start_transaction+0xd1/0x5d0
	 btrfs_dirty_inode+0x42/0xd0
	 touch_atime+0xa1/0xd0
	 btrfs_file_mmap+0x3f/0x60
	 mmap_region+0x3a4/0x640
	 do_mmap+0x376/0x580
	 vm_mmap_pgoff+0xd5/0x120
	 ksys_mmap_pgoff+0x193/0x230
	 do_syscall_64+0x50/0x90
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> #3 (&mm->mmap_lock#2){++++}-{3:3}:
	 __might_fault+0x68/0x90
	 _copy_to_user+0x1e/0x80
	 perf_read+0x141/0x2c0
	 vfs_read+0xad/0x1b0
	 ksys_read+0x5f/0xe0
	 do_syscall_64+0x50/0x90
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> #2 (&cpuctx_mutex){+.+.}-{3:3}:
	 __mutex_lock+0x9f/0x930
	 perf_event_init_cpu+0x88/0x150
	 perf_event_init+0x1db/0x20b
	 start_kernel+0x3ae/0x53c
	 secondary_startup_64+0xa4/0xb0

  -> #1 (pmus_lock){+.+.}-{3:3}:
	 __mutex_lock+0x9f/0x930
	 perf_event_init_cpu+0x4f/0x150
	 cpuhp_invoke_callback+0xb1/0x900
	 _cpu_up.constprop.26+0x9f/0x130
	 cpu_up+0x7b/0xc0
	 bringup_nonboot_cpus+0x4f/0x60
	 smp_init+0x26/0x71
	 kernel_init_freeable+0x110/0x258
	 kernel_init+0xa/0x103
	 ret_from_fork+0x1f/0x30

  -> #0 (cpu_hotplug_lock){++++}-{0:0}:
	 __lock_acquire+0x1272/0x2310
	 lock_acquire+0x9e/0x360
	 cpus_read_lock+0x39/0xb0
	 alloc_workqueue+0x378/0x450
	 __btrfs_alloc_workqueue+0x15d/0x200
	 btrfs_alloc_workqueue+0x51/0x160
	 scrub_workers_get+0x5a/0x170
	 btrfs_scrub_dev+0x18c/0x630
	 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4
	 btrfs_ioctl+0x2799/0x30a0
	 ksys_ioctl+0x83/0xc0
	 __x64_sys_ioctl+0x16/0x20
	 do_syscall_64+0x50/0x90
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  other info that might help us debug this:

  Chain exists of:
    cpu_hotplug_lock --> &fs_devs->device_list_mutex --> &fs_info->scrub_lock

   Possible unsafe locking scenario:

	 CPU0                    CPU1
	 ----                    ----
    lock(&fs_info->scrub_lock);
				 lock(&fs_devs->device_list_mutex);
				 lock(&fs_info->scrub_lock);
    lock(cpu_hotplug_lock);

   *** DEADLOCK ***

  2 locks held by btrfs/229626:
   #0: ffff88bfe8bb86e0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: btrfs_scrub_dev+0xbd/0x630
   #1: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630

  stack backtrace:
  CPU: 15 PID: 229626 Comm: btrfs Kdump: loaded Not tainted 5.8.0-rc7-00172-g021118712e59 thesofproject#932
  Hardware name: Quanta Tioga Pass Single Side 01-0030993006/Tioga Pass Single Side, BIOS F08_3A18 12/20/2018
  Call Trace:
   dump_stack+0x78/0xa0
   check_noncircular+0x165/0x180
   __lock_acquire+0x1272/0x2310
   lock_acquire+0x9e/0x360
   ? alloc_workqueue+0x378/0x450
   cpus_read_lock+0x39/0xb0
   ? alloc_workqueue+0x378/0x450
   alloc_workqueue+0x378/0x450
   ? rcu_read_lock_sched_held+0x52/0x80
   __btrfs_alloc_workqueue+0x15d/0x200
   btrfs_alloc_workqueue+0x51/0x160
   scrub_workers_get+0x5a/0x170
   btrfs_scrub_dev+0x18c/0x630
   ? start_transaction+0xd1/0x5d0
   btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4
   btrfs_ioctl+0x2799/0x30a0
   ? do_sigaction+0x102/0x250
   ? lockdep_hardirqs_on_prepare+0xca/0x160
   ? _raw_spin_unlock_irq+0x24/0x30
   ? trace_hardirqs_on+0x1c/0xe0
   ? _raw_spin_unlock_irq+0x24/0x30
   ? do_sigaction+0x102/0x250
   ? ksys_ioctl+0x83/0xc0
   ksys_ioctl+0x83/0xc0
   __x64_sys_ioctl+0x16/0x20
   do_syscall_64+0x50/0x90
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

This happens because we're allocating the scrub workqueues under the
scrub and device list mutex, which brings in a whole host of other
dependencies.

Because the work queue allocation is done with GFP_KERNEL, it can
trigger reclaim, which can lead to a transaction commit, which in turns
needs the device_list_mutex, it can lead to a deadlock. A different
problem for which this fix is a solution.

Fix this by moving the actual allocation outside of the
scrub lock, and then only take the lock once we're ready to actually
assign them to the fs_info.  We'll now have to cleanup the workqueues in
a few more places, so I've added a helper to do the refcount dance to
safely free the workqueues.

CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

…s metrics" test

Linux 5.9 introduced perf test case "Parse and process metrics" and
on s390 this test case always dumps core:

  [root@t35lp67 perf]# ./perf test -vvvv -F 67
  67: Parse and process metrics                             :
  --- start ---
  metric expr inst_retired.any / cpu_clk_unhalted.thread for IPC
  parsing metric: inst_retired.any / cpu_clk_unhalted.thread
  Segmentation fault (core dumped)
  [root@t35lp67 perf]#

I debugged this core dump and gdb shows this call chain:

  (gdb) where
   #0  0x000003ffabc3192a in __strnlen_c_1 () from /lib64/libc.so.6
   #1  0x000003ffabc293de in strcasestr () from /lib64/libc.so.6
   #2  0x0000000001102ba2 in match_metric(list=0x1e6ea20 "inst_retired.any",
            n=<optimized out>)
       at util/metricgroup.c:368
   #3  find_metric (map=<optimized out>, map=<optimized out>,
           metric=0x1e6ea20 "inst_retired.any")
      at util/metricgroup.c:765
   #4  __resolve_metric (ids=0x0, map=<optimized out>, metric_list=0x0,
           metric_no_group=<optimized out>, m=<optimized out>)
      at util/metricgroup.c:844
   #5  resolve_metric (ids=0x0, map=0x0, metric_list=0x0,
          metric_no_group=<optimized out>)
      at util/metricgroup.c:881
   thesofproject#6  metricgroup__add_metric (metric=<optimized out>,
        metric_no_group=metric_no_group@entry=false, events=<optimized out>,
        events@entry=0x3ffd84fb878, metric_list=0x0,
        metric_list@entry=0x3ffd84fb868, map=0x0)
      at util/metricgroup.c:943
   thesofproject#7  0x00000000011034ae in metricgroup__add_metric_list (map=0x13f9828 <map>,
        metric_list=0x3ffd84fb868, events=0x3ffd84fb878,
        metric_no_group=<optimized out>, list=<optimized out>)
      at util/metricgroup.c:988
   thesofproject#8  parse_groups (perf_evlist=perf_evlist@entry=0x1e70260,
          str=str@entry=0x12f34b2 "IPC", metric_no_group=<optimized out>,
          metric_no_merge=<optimized out>,
          fake_pmu=fake_pmu@entry=0x1462f18 <perf_pmu.fake>,
          metric_events=0x3ffd84fba58, map=0x1)
      at util/metricgroup.c:1040
   thesofproject#9  0x0000000001103eb2 in metricgroup__parse_groups_test(
  	evlist=evlist@entry=0x1e70260, map=map@entry=0x13f9828 <map>,
  	str=str@entry=0x12f34b2 "IPC",
  	metric_no_group=metric_no_group@entry=false,
  	metric_no_merge=metric_no_merge@entry=false,
  	metric_events=0x3ffd84fba58)
      at util/metricgroup.c:1082
   thesofproject#10 0x00000000010c84d8 in __compute_metric (ratio2=0x0, name2=0x0,
          ratio1=<synthetic pointer>, name1=0x12f34b2 "IPC",
  	vals=0x3ffd84fbad8, name=0x12f34b2 "IPC")
      at tests/parse-metric.c:159
   thesofproject#11 compute_metric (ratio=<synthetic pointer>, vals=0x3ffd84fbad8,
  	name=0x12f34b2 "IPC")
      at tests/parse-metric.c:189
   thesofproject#12 test_ipc () at tests/parse-metric.c:208
.....
..... omitted many more lines

This test case was added with
commit 218ca91 ("perf tests: Add parse metric test for frontend metric").

When I compile with make DEBUG=y it works fine and I do not get a core dump.

It turned out that the above listed function call chain worked on a struct
pmu_event array which requires a trailing element with zeroes which was
missing. The marco map_for_each_event() loops over that array tests for members
metric_expr/metric_name/metric_group being non-NULL. Adding this element fixes
the issue.

Output after:

  [root@t35lp46 perf]# ./perf test 67
  67: Parse and process metrics                             : Ok
  [root@t35lp46 perf]#

Committer notes:

As Ian remarks, this is not s390 specific:

<quote Ian>
  This also shows up with address sanitizer on all architectures
  (perhaps change the patch title) and perhaps add a "Fixes: <commit>"
  tag.

  =================================================================
  ==4718==ERROR: AddressSanitizer: global-buffer-overflow on address
  0x55c93b4d59e8 at pc 0x55c93a1541e2 bp 0x7ffd24327c60 sp
  0x7ffd24327c58
  READ of size 8 at 0x55c93b4d59e8 thread T0
      #0 0x55c93a1541e1 in find_metric tools/perf/util/metricgroup.c:764:2
      #1 0x55c93a153e6c in __resolve_metric tools/perf/util/metricgroup.c:844:9
      #2 0x55c93a152f18 in resolve_metric tools/perf/util/metricgroup.c:881:9
      #3 0x55c93a1528db in metricgroup__add_metric
  tools/perf/util/metricgroup.c:943:9
      #4 0x55c93a151996 in metricgroup__add_metric_list
  tools/perf/util/metricgroup.c:988:9
      #5 0x55c93a1511b9 in parse_groups tools/perf/util/metricgroup.c:1040:8
      thesofproject#6 0x55c93a1513e1 in metricgroup__parse_groups_test
  tools/perf/util/metricgroup.c:1082:9
      thesofproject#7 0x55c93a0108ae in __compute_metric tools/perf/tests/parse-metric.c:159:8
      thesofproject#8 0x55c93a010744 in compute_metric tools/perf/tests/parse-metric.c:189:9
      thesofproject#9 0x55c93a00f5ee in test_ipc tools/perf/tests/parse-metric.c:208:2
      thesofproject#10 0x55c93a00f1e8 in test__parse_metric
  tools/perf/tests/parse-metric.c:345:2
      thesofproject#11 0x55c939fd7202 in run_test tools/perf/tests/builtin-test.c:410:9
      thesofproject#12 0x55c939fd6736 in test_and_print tools/perf/tests/builtin-test.c:440:9
      thesofproject#13 0x55c939fd58c3 in __cmd_test tools/perf/tests/builtin-test.c:661:4
      thesofproject#14 0x55c939fd4e02 in cmd_test tools/perf/tests/builtin-test.c:807:9
      thesofproject#15 0x55c939e4763d in run_builtin tools/perf/perf.c:313:11
      thesofproject#16 0x55c939e46475 in handle_internal_command tools/perf/perf.c:365:8
      thesofproject#17 0x55c939e4737e in run_argv tools/perf/perf.c:409:2
      thesofproject#18 0x55c939e45f7e in main tools/perf/perf.c:539:3

  0x55c93b4d59e8 is located 0 bytes to the right of global variable
  'pme_test' defined in 'tools/perf/tests/parse-metric.c:17:25'
  (0x55c93b4d54a0) of size 1352
  SUMMARY: AddressSanitizer: global-buffer-overflow
  tools/perf/util/metricgroup.c:764:2 in find_metric
  Shadow bytes around the buggy address:
    0x0ab9a7692ae0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x0ab9a7692af0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x0ab9a7692b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x0ab9a7692b10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x0ab9a7692b20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  =>0x0ab9a7692b30: 00 00 00 00 00 00 00 00 00 00 00 00 00[f9]f9 f9
    0x0ab9a7692b40: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9
    0x0ab9a7692b50: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9
    0x0ab9a7692b60: f9 f9 f9 f9 f9 f9 f9 f9 00 00 00 00 00 00 00 00
    0x0ab9a7692b70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x0ab9a7692b80: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9
  Shadow byte legend (one shadow byte represents 8 application bytes):
    Addressable:           00
    Partially addressable: 01 02 03 04 05 06 07
    Heap left redzone:	   fa
    Freed heap region:	   fd
    Stack left redzone:	   f1
    Stack mid redzone:	   f2
    Stack right redzone:     f3
    Stack after return:	   f5
    Stack use after scope:   f8
    Global redzone:          f9
    Global init order:	   f6
    Poisoned by user:        f7
    Container overflow:	   fc
    Array cookie:            ac
    Intra object redzone:    bb
    ASan internal:           fe
    Left alloca redzone:     ca
    Right alloca redzone:    cb
    Shadow gap:              cc
</quote>

I'm also adding the missing "Fixes" tag and setting just .name to NULL,
as doing it that way is more compact (the compiler will zero out
everything else) and the table iterators look for .name being NULL as
the sentinel marking the end of the table.

Fixes: 0a507af ("perf tests: Add parse metric test for ipc metric")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200825071211.16959-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Move all allocations outside of the regulator_lock()ed section.

======================================================
WARNING: possible circular locking dependency detected
5.7.13+ thesofproject#535 Not tainted
------------------------------------------------------
f2fs_discard-179:7/702 is trying to acquire lock:
c0e5d920 (regulator_list_mutex){+.+.}-{3:3}, at: regulator_lock_dependent+0x54/0x2c0

but task is already holding lock:
cb95b080 (&dcc->cmd_lock){+.+.}-{3:3}, at: __issue_discard_cmd+0xec/0x5f8

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

[...]

-> #3 (fs_reclaim){+.+.}-{0:0}:
       fs_reclaim_acquire.part.11+0x40/0x50
       fs_reclaim_acquire+0x24/0x28
       __kmalloc_track_caller+0x54/0x218
       kstrdup+0x40/0x5c
       create_regulator+0xf4/0x368
       regulator_resolve_supply+0x1a0/0x200
       regulator_register+0x9c8/0x163c

[...]

other info that might help us debug this:

Chain exists of:
  regulator_list_mutex --> &sit_i->sentry_lock --> &dcc->cmd_lock

[...]

Fixes: f8702f9 ("regulator: core: Use ww_mutex for regulators locking")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/6eebc99b2474f4ffaa0405b15178ece0e7e4f608.1597195321.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Mark Brown <broonie@kernel.org>

syzbot reported twice a lockdep issue in fib6_del() [1]
which I think is caused by net->ipv6.fib6_null_entry
having a NULL fib6_table pointer.

fib6_del() already checks for fib6_null_entry special
case, we only need to return earlier.

Bug seems to occur very rarely, I have thus chosen
a 'bug origin' that makes backports not too complex.

[1]
WARNING: suspicious RCU usage
5.9.0-rc4-syzkaller #0 Not tainted
-----------------------------
net/ipv6/ip6_fib.c:1996 suspicious rcu_dereference_protected() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
4 locks held by syz-executor.5/8095:
 #0: ffffffff8a7ea708 (rtnl_mutex){+.+.}-{3:3}, at: ppp_release+0x178/0x240 drivers/net/ppp/ppp_generic.c:401
 #1: ffff88804c422dd8 (&net->ipv6.fib6_gc_lock){+.-.}-{2:2}, at: spin_trylock_bh include/linux/spinlock.h:414 [inline]
 #1: ffff88804c422dd8 (&net->ipv6.fib6_gc_lock){+.-.}-{2:2}, at: fib6_run_gc+0x21b/0x2d0 net/ipv6/ip6_fib.c:2312
 #2: ffffffff89bd6a40 (rcu_read_lock){....}-{1:2}, at: __fib6_clean_all+0x0/0x290 net/ipv6/ip6_fib.c:2613
 #3: ffff8880a82e6430 (&tb->tb6_lock){+.-.}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:359 [inline]
 #3: ffff8880a82e6430 (&tb->tb6_lock){+.-.}-{2:2}, at: __fib6_clean_all+0x107/0x290 net/ipv6/ip6_fib.c:2245

stack backtrace:
CPU: 1 PID: 8095 Comm: syz-executor.5 Not tainted 5.9.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x198/0x1fd lib/dump_stack.c:118
 fib6_del+0x12b4/0x1630 net/ipv6/ip6_fib.c:1996
 fib6_clean_node+0x39b/0x570 net/ipv6/ip6_fib.c:2180
 fib6_walk_continue+0x4aa/0x8e0 net/ipv6/ip6_fib.c:2102
 fib6_walk+0x182/0x370 net/ipv6/ip6_fib.c:2150
 fib6_clean_tree+0xdb/0x120 net/ipv6/ip6_fib.c:2230
 __fib6_clean_all+0x120/0x290 net/ipv6/ip6_fib.c:2246
 fib6_clean_all net/ipv6/ip6_fib.c:2257 [inline]
 fib6_run_gc+0x113/0x2d0 net/ipv6/ip6_fib.c:2320
 ndisc_netdev_event+0x217/0x350 net/ipv6/ndisc.c:1805
 notifier_call_chain+0xb5/0x200 kernel/notifier.c:83
 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:2033
 call_netdevice_notifiers_extack net/core/dev.c:2045 [inline]
 call_netdevice_notifiers net/core/dev.c:2059 [inline]
 dev_close_many+0x30b/0x650 net/core/dev.c:1634
 rollback_registered_many+0x3a8/0x1210 net/core/dev.c:9261
 rollback_registered net/core/dev.c:9329 [inline]
 unregister_netdevice_queue+0x2dd/0x570 net/core/dev.c:10410
 unregister_netdevice include/linux/netdevice.h:2774 [inline]
 ppp_release+0x216/0x240 drivers/net/ppp/ppp_generic.c:403
 __fput+0x285/0x920 fs/file_table.c:281
 task_work_run+0xdd/0x190 kernel/task_work.c:141
 tracehook_notify_resume include/linux/tracehook.h:188 [inline]
 exit_to_user_mode_loop kernel/entry/common.c:163 [inline]
 exit_to_user_mode_prepare+0x1e1/0x200 kernel/entry/common.c:190
 syscall_exit_to_user_mode+0x7e/0x2e0 kernel/entry/common.c:265
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 421842e ("net/ipv6: Add fib6_null_entry")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Ahern <dsahern@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When compiling with DEBUG=1 on Fedora 32 I'm getting crash for 'perf
test signal':

  Program received signal SIGSEGV, Segmentation fault.
  0x0000000000c68548 in __test_function ()
  (gdb) bt
  #0  0x0000000000c68548 in __test_function ()
  #1  0x00000000004d62e9 in test_function () at tests/bp_signal.c:61
  #2  0x00000000004d689a in test__bp_signal (test=0xa8e280 <generic_ ...
  #3  0x00000000004b7d49 in run_test (test=0xa8e280 <generic_tests+1 ...
  #4  0x00000000004b7e7f in test_and_print (t=0xa8e280 <generic_test ...
  #5  0x00000000004b8927 in __cmd_test (argc=1, argv=0x7fffffffdce0, ...
  ...

It's caused by the symbol __test_function being in the ".bss" section:

  $ readelf -a ./perf | less
    [Nr] Name              Type             Address           Offset
         Size              EntSize          Flags  Link  Info  Align
    ...
    [28] .bss              NOBITS           0000000000c356a0  008346a0
         00000000000511f8  0000000000000000  WA       0     0     32

  $ nm perf | grep __test_function
  0000000000c68548 B __test_function

I guess most of the time we're just lucky the inline asm ended up in the
".text" section, so making it specific explicit with push and pop
section clauses.

  $ readelf -a ./perf | less
    [Nr] Name              Type             Address           Offset
         Size              EntSize          Flags  Link  Info  Align
    ...
    [13] .text             PROGBITS         0000000000431240  00031240
         0000000000306faa  0000000000000000  AX       0     0     16

  $ nm perf | grep __test_function
  00000000004d62c8 T __test_function

Committer testing:

  $ readelf -wi ~/bin/perf | grep producer -m1
    <c>   DW_AT_producer    : (indirect string, offset: 0x254a): GNU C99 10.2.1 20200723 (Red Hat 10.2.1-1) -mtune=generic -march=x86-64 -ggdb3 -std=gnu99 -fno-omit-frame-pointer -funwind-tables -fstack-protector-all
                                                                                                                                         ^^^^^
                                                                                                                                         ^^^^^
                                                                                                                                         ^^^^^
  $

Before:

  $ perf test signal
  20: Breakpoint overflow signal handler                    : FAILED!
  $

After:

  $ perf test signal
  20: Breakpoint overflow signal handler                    : Ok
  $

Fixes: 8fd34e1 ("perf test: Improve bp_signal")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lore.kernel.org/lkml/20200911130005.1842138-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The aliases were never released causing the following leaks:

  Indirect leak of 1224 byte(s) in 9 object(s) allocated from:
    #0 0x7feefb830628 in malloc (/lib/x86_64-linux-gnu/libasan.so.5+0x107628)
    #1 0x56332c8f1b62 in __perf_pmu__new_alias util/pmu.c:322
    #2 0x56332c8f401f in pmu_add_cpu_aliases_map util/pmu.c:778
    #3 0x56332c792ce9 in __test__pmu_event_aliases tests/pmu-events.c:295
    #4 0x56332c792ce9 in test_aliases tests/pmu-events.c:367
    #5 0x56332c76a09b in run_test tests/builtin-test.c:410
    thesofproject#6 0x56332c76a09b in test_and_print tests/builtin-test.c:440
    thesofproject#7 0x56332c76ce69 in __cmd_test tests/builtin-test.c:695
    thesofproject#8 0x56332c76ce69 in cmd_test tests/builtin-test.c:807
    thesofproject#9 0x56332c7d2214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
    thesofproject#10 0x56332c6701a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
    thesofproject#11 0x56332c6701a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
    thesofproject#12 0x56332c6701a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
    thesofproject#13 0x7feefb359cc9 in __libc_start_main ../csu/libc-start.c:308

Fixes: 956a783 ("perf test: Test pmu-events aliases")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-11-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The evsel->unit borrows a pointer of pmu event or alias instead of
owns a string.  But tool event (duration_time) passes a result of
strdup() caused a leak.

It was found by ASAN during metric test:

  Direct leak of 210 byte(s) in 70 object(s) allocated from:
    #0 0x7fe366fca0b5 in strdup (/lib/x86_64-linux-gnu/libasan.so.5+0x920b5)
    #1 0x559fbbcc6ea3 in add_event_tool util/parse-events.c:414
    #2 0x559fbbcc6ea3 in parse_events_add_tool util/parse-events.c:1414
    #3 0x559fbbd8474d in parse_events_parse util/parse-events.y:439
    #4 0x559fbbcc95da in parse_events__scanner util/parse-events.c:2096
    #5 0x559fbbcc95da in __parse_events util/parse-events.c:2141
    thesofproject#6 0x559fbbc28555 in check_parse_id tests/pmu-events.c:406
    thesofproject#7 0x559fbbc28555 in check_parse_id tests/pmu-events.c:393
    thesofproject#8 0x559fbbc28555 in check_parse_cpu tests/pmu-events.c:415
    thesofproject#9 0x559fbbc28555 in test_parsing tests/pmu-events.c:498
    thesofproject#10 0x559fbbc0109b in run_test tests/builtin-test.c:410
    thesofproject#11 0x559fbbc0109b in test_and_print tests/builtin-test.c:440
    thesofproject#12 0x559fbbc03e69 in __cmd_test tests/builtin-test.c:695
    thesofproject#13 0x559fbbc03e69 in cmd_test tests/builtin-test.c:807
    thesofproject#14 0x559fbbc691f4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
    thesofproject#15 0x559fbbb071a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
    thesofproject#16 0x559fbbb071a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
    thesofproject#17 0x559fbbb071a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
    thesofproject#18 0x7fe366b68cc9 in __libc_start_main ../csu/libc-start.c:308

Fixes: f0fbb11 ("perf stat: Implement duration_time as a proper event")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The test_generic_metric() missed to release entries in the pctx.  Asan
reported following leak (and more):

  Direct leak of 128 byte(s) in 1 object(s) allocated from:
    #0 0x7f4c9396980e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e)
    #1 0x55f7e748cc14 in hashmap_grow (/home/namhyung/project/linux/tools/perf/perf+0x90cc14)
    #2 0x55f7e748d497 in hashmap__insert (/home/namhyung/project/linux/tools/perf/perf+0x90d497)
    #3 0x55f7e7341667 in hashmap__set /home/namhyung/project/linux/tools/perf/util/hashmap.h:111
    #4 0x55f7e7341667 in expr__add_ref util/expr.c:120
    #5 0x55f7e7292436 in prepare_metric util/stat-shadow.c:783
    thesofproject#6 0x55f7e729556d in test_generic_metric util/stat-shadow.c:858
    thesofproject#7 0x55f7e712390b in compute_single tests/parse-metric.c:128
    thesofproject#8 0x55f7e712390b in __compute_metric tests/parse-metric.c:180
    thesofproject#9 0x55f7e712446d in compute_metric tests/parse-metric.c:196
    thesofproject#10 0x55f7e712446d in test_dcache_l2 tests/parse-metric.c:295
    thesofproject#11 0x55f7e712446d in test__parse_metric tests/parse-metric.c:355
    thesofproject#12 0x55f7e70be09b in run_test tests/builtin-test.c:410
    thesofproject#13 0x55f7e70be09b in test_and_print tests/builtin-test.c:440
    thesofproject#14 0x55f7e70c101a in __cmd_test tests/builtin-test.c:661
    thesofproject#15 0x55f7e70c101a in cmd_test tests/builtin-test.c:807
    thesofproject#16 0x55f7e7126214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
    thesofproject#17 0x55f7e6fc41a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
    thesofproject#18 0x55f7e6fc41a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
    thesofproject#19 0x55f7e6fc41a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
    thesofproject#20 0x7f4c93492cc9 in __libc_start_main ../csu/libc-start.c:308

Fixes: 6d432c4 ("perf tools: Add test_generic_metric function")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-8-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The metricgroup__add_metric() can find multiple match for a metric group
and it's possible to fail.  Also it can fail in the middle like in
resolve_metric() even for single metric.

In those cases, the intermediate list and ids will be leaked like:

  Direct leak of 3 byte(s) in 1 object(s) allocated from:
    #0 0x7f4c938f40b5 in strdup (/lib/x86_64-linux-gnu/libasan.so.5+0x920b5)
    #1 0x55f7e71c1bef in __add_metric util/metricgroup.c:683
    #2 0x55f7e71c31d0 in add_metric util/metricgroup.c:906
    #3 0x55f7e71c3844 in metricgroup__add_metric util/metricgroup.c:940
    #4 0x55f7e71c488d in metricgroup__add_metric_list util/metricgroup.c:993
    #5 0x55f7e71c488d in parse_groups util/metricgroup.c:1045
    thesofproject#6 0x55f7e71c60a4 in metricgroup__parse_groups_test util/metricgroup.c:1087
    thesofproject#7 0x55f7e71235ae in __compute_metric tests/parse-metric.c:164
    thesofproject#8 0x55f7e7124650 in compute_metric tests/parse-metric.c:196
    thesofproject#9 0x55f7e7124650 in test_recursion_fail tests/parse-metric.c:318
    thesofproject#10 0x55f7e7124650 in test__parse_metric tests/parse-metric.c:356
    thesofproject#11 0x55f7e70be09b in run_test tests/builtin-test.c:410
    thesofproject#12 0x55f7e70be09b in test_and_print tests/builtin-test.c:440
    thesofproject#13 0x55f7e70c101a in __cmd_test tests/builtin-test.c:661
    thesofproject#14 0x55f7e70c101a in cmd_test tests/builtin-test.c:807
    thesofproject#15 0x55f7e7126214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
    thesofproject#16 0x55f7e6fc41a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
    thesofproject#17 0x55f7e6fc41a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
    thesofproject#18 0x55f7e6fc41a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
    thesofproject#19 0x7f4c93492cc9 in __libc_start_main ../csu/libc-start.c:308

Fixes: 83de0b7 ("perf metric: Collect referenced metrics in struct metric_ref_node")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-9-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The following leaks were detected by ASAN:

  Indirect leak of 360 byte(s) in 9 object(s) allocated from:
    #0 0x7fecc305180e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e)
    #1 0x560578f6dce5 in perf_pmu__new_format util/pmu.c:1333
    #2 0x560578f752fc in perf_pmu_parse util/pmu.y:59
    #3 0x560578f6a8b7 in perf_pmu__format_parse util/pmu.c:73
    #4 0x560578e07045 in test__pmu tests/pmu.c:155
    #5 0x560578de109b in run_test tests/builtin-test.c:410
    thesofproject#6 0x560578de109b in test_and_print tests/builtin-test.c:440
    thesofproject#7 0x560578de401a in __cmd_test tests/builtin-test.c:661
    thesofproject#8 0x560578de401a in cmd_test tests/builtin-test.c:807
    thesofproject#9 0x560578e49354 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
    thesofproject#10 0x560578ce71a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
    thesofproject#11 0x560578ce71a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
    thesofproject#12 0x560578ce71a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
    thesofproject#13 0x7fecc2b7acc9 in __libc_start_main ../csu/libc-start.c:308

Fixes: cff7f95 ("perf tests: Move pmu tests into separate object")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-12-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

When closing and freeing the source device we could end up doing our
final blkdev_put() on the bdev, which will grab the bd_mutex.  As such
we want to be holding as few locks as possible, so move this call
outside of the dev_replace->lock_finishing_cancel_unmount lock.  Since
we're modifying the fs_devices we need to make sure we're holding the
uuid_mutex here, so take that as well.

There's a report from syzbot probably hitting one of the cases where
the bd_mutex and device_list_mutex are taken in the wrong order, however
it's not with device replace, like this patch fixes. As there's no
reproducer available so far, we can't verify the fix.

https://lore.kernel.org/lkml/000000000000fc04d105afcf86d7@google.com/
dashboard link: https://syzkaller.appspot.com/bug?extid=84a0634dc5d21d488419

  WARNING: possible circular locking dependency detected
  5.9.0-rc5-syzkaller #0 Not tainted
  ------------------------------------------------------
  syz-executor.0/6878 is trying to acquire lock:
  ffff88804c17d780 (&bdev->bd_mutex){+.+.}-{3:3}, at: blkdev_put+0x30/0x520 fs/block_dev.c:1804

  but task is already holding lock:
  ffff8880908cfce0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: close_fs_devices.part.0+0x2e/0x800 fs/btrfs/volumes.c:1159

  which lock already depends on the new lock.

  the existing dependency chain (in reverse order) is:

  -> #4 (&fs_devs->device_list_mutex){+.+.}-{3:3}:
	 __mutex_lock_common kernel/locking/mutex.c:956 [inline]
	 __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103
	 btrfs_finish_chunk_alloc+0x281/0xf90 fs/btrfs/volumes.c:5255
	 btrfs_create_pending_block_groups+0x2f3/0x700 fs/btrfs/block-group.c:2109
	 __btrfs_end_transaction+0xf5/0x690 fs/btrfs/transaction.c:916
	 find_free_extent_update_loop fs/btrfs/extent-tree.c:3807 [inline]
	 find_free_extent+0x23b7/0x2e60 fs/btrfs/extent-tree.c:4127
	 btrfs_reserve_extent+0x166/0x460 fs/btrfs/extent-tree.c:4206
	 cow_file_range+0x3de/0x9b0 fs/btrfs/inode.c:1063
	 btrfs_run_delalloc_range+0x2cf/0x1410 fs/btrfs/inode.c:1838
	 writepage_delalloc+0x150/0x460 fs/btrfs/extent_io.c:3439
	 __extent_writepage+0x441/0xd00 fs/btrfs/extent_io.c:3653
	 extent_write_cache_pages.constprop.0+0x69d/0x1040 fs/btrfs/extent_io.c:4249
	 extent_writepages+0xcd/0x2b0 fs/btrfs/extent_io.c:4370
	 do_writepages+0xec/0x290 mm/page-writeback.c:2352
	 __writeback_single_inode+0x125/0x1400 fs/fs-writeback.c:1461
	 writeback_sb_inodes+0x53d/0xf40 fs/fs-writeback.c:1721
	 wb_writeback+0x2ad/0xd40 fs/fs-writeback.c:1894
	 wb_do_writeback fs/fs-writeback.c:2039 [inline]
	 wb_workfn+0x2dc/0x13e0 fs/fs-writeback.c:2080
	 process_one_work+0x94c/0x1670 kernel/workqueue.c:2269
	 worker_thread+0x64c/0x1120 kernel/workqueue.c:2415
	 kthread+0x3b5/0x4a0 kernel/kthread.c:292
	 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294

  -> #3 (sb_internal#2){.+.+}-{0:0}:
	 percpu_down_read include/linux/percpu-rwsem.h:51 [inline]
	 __sb_start_write+0x234/0x470 fs/super.c:1672
	 sb_start_intwrite include/linux/fs.h:1690 [inline]
	 start_transaction+0xbe7/0x1170 fs/btrfs/transaction.c:624
	 find_free_extent_update_loop fs/btrfs/extent-tree.c:3789 [inline]
	 find_free_extent+0x25e1/0x2e60 fs/btrfs/extent-tree.c:4127
	 btrfs_reserve_extent+0x166/0x460 fs/btrfs/extent-tree.c:4206
	 cow_file_range+0x3de/0x9b0 fs/btrfs/inode.c:1063
	 btrfs_run_delalloc_range+0x2cf/0x1410 fs/btrfs/inode.c:1838
	 writepage_delalloc+0x150/0x460 fs/btrfs/extent_io.c:3439
	 __extent_writepage+0x441/0xd00 fs/btrfs/extent_io.c:3653
	 extent_write_cache_pages.constprop.0+0x69d/0x1040 fs/btrfs/extent_io.c:4249
	 extent_writepages+0xcd/0x2b0 fs/btrfs/extent_io.c:4370
	 do_writepages+0xec/0x290 mm/page-writeback.c:2352
	 __writeback_single_inode+0x125/0x1400 fs/fs-writeback.c:1461
	 writeback_sb_inodes+0x53d/0xf40 fs/fs-writeback.c:1721
	 wb_writeback+0x2ad/0xd40 fs/fs-writeback.c:1894
	 wb_do_writeback fs/fs-writeback.c:2039 [inline]
	 wb_workfn+0x2dc/0x13e0 fs/fs-writeback.c:2080
	 process_one_work+0x94c/0x1670 kernel/workqueue.c:2269
	 worker_thread+0x64c/0x1120 kernel/workqueue.c:2415
	 kthread+0x3b5/0x4a0 kernel/kthread.c:292
	 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294

  -> #2 ((work_completion)(&(&wb->dwork)->work)){+.+.}-{0:0}:
	 __flush_work+0x60e/0xac0 kernel/workqueue.c:3041
	 wb_shutdown+0x180/0x220 mm/backing-dev.c:355
	 bdi_unregister+0x174/0x590 mm/backing-dev.c:872
	 del_gendisk+0x820/0xa10 block/genhd.c:933
	 loop_remove drivers/block/loop.c:2192 [inline]
	 loop_control_ioctl drivers/block/loop.c:2291 [inline]
	 loop_control_ioctl+0x3b1/0x480 drivers/block/loop.c:2257
	 vfs_ioctl fs/ioctl.c:48 [inline]
	 __do_sys_ioctl fs/ioctl.c:753 [inline]
	 __se_sys_ioctl fs/ioctl.c:739 [inline]
	 __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739
	 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> #1 (loop_ctl_mutex){+.+.}-{3:3}:
	 __mutex_lock_common kernel/locking/mutex.c:956 [inline]
	 __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103
	 lo_open+0x19/0xd0 drivers/block/loop.c:1893
	 __blkdev_get+0x759/0x1aa0 fs/block_dev.c:1507
	 blkdev_get fs/block_dev.c:1639 [inline]
	 blkdev_open+0x227/0x300 fs/block_dev.c:1753
	 do_dentry_open+0x4b9/0x11b0 fs/open.c:817
	 do_open fs/namei.c:3251 [inline]
	 path_openat+0x1b9a/0x2730 fs/namei.c:3368
	 do_filp_open+0x17e/0x3c0 fs/namei.c:3395
	 do_sys_openat2+0x16d/0x420 fs/open.c:1168
	 do_sys_open fs/open.c:1184 [inline]
	 __do_sys_open fs/open.c:1192 [inline]
	 __se_sys_open fs/open.c:1188 [inline]
	 __x64_sys_open+0x119/0x1c0 fs/open.c:1188
	 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> #0 (&bdev->bd_mutex){+.+.}-{3:3}:
	 check_prev_add kernel/locking/lockdep.c:2496 [inline]
	 check_prevs_add kernel/locking/lockdep.c:2601 [inline]
	 validate_chain kernel/locking/lockdep.c:3218 [inline]
	 __lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4426
	 lock_acquire+0x1f3/0xae0 kernel/locking/lockdep.c:5006
	 __mutex_lock_common kernel/locking/mutex.c:956 [inline]
	 __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103
	 blkdev_put+0x30/0x520 fs/block_dev.c:1804
	 btrfs_close_bdev fs/btrfs/volumes.c:1117 [inline]
	 btrfs_close_bdev fs/btrfs/volumes.c:1107 [inline]
	 btrfs_close_one_device fs/btrfs/volumes.c:1133 [inline]
	 close_fs_devices.part.0+0x1a4/0x800 fs/btrfs/volumes.c:1161
	 close_fs_devices fs/btrfs/volumes.c:1193 [inline]
	 btrfs_close_devices+0x95/0x1f0 fs/btrfs/volumes.c:1179
	 close_ctree+0x688/0x6cb fs/btrfs/disk-io.c:4149
	 generic_shutdown_super+0x144/0x370 fs/super.c:464
	 kill_anon_super+0x36/0x60 fs/super.c:1108
	 btrfs_kill_super+0x38/0x50 fs/btrfs/super.c:2265
	 deactivate_locked_super+0x94/0x160 fs/super.c:335
	 deactivate_super+0xad/0xd0 fs/super.c:366
	 cleanup_mnt+0x3a3/0x530 fs/namespace.c:1118
	 task_work_run+0xdd/0x190 kernel/task_work.c:141
	 tracehook_notify_resume include/linux/tracehook.h:188 [inline]
	 exit_to_user_mode_loop kernel/entry/common.c:163 [inline]
	 exit_to_user_mode_prepare+0x1e1/0x200 kernel/entry/common.c:190
	 syscall_exit_to_user_mode+0x7e/0x2e0 kernel/entry/common.c:265
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  other info that might help us debug this:

  Chain exists of:
    &bdev->bd_mutex --> sb_internal#2 --> &fs_devs->device_list_mutex

   Possible unsafe locking scenario:

	 CPU0                    CPU1
	 ----                    ----
    lock(&fs_devs->device_list_mutex);
				 lock(sb_internal#2);
				 lock(&fs_devs->device_list_mutex);
    lock(&bdev->bd_mutex);

   *** DEADLOCK ***

  3 locks held by syz-executor.0/6878:
   #0: ffff88809070c0e0 (&type->s_umount_key#70){++++}-{3:3}, at: deactivate_super+0xa5/0xd0 fs/super.c:365
   #1: ffffffff8a5b37a8 (uuid_mutex){+.+.}-{3:3}, at: btrfs_close_devices+0x23/0x1f0 fs/btrfs/volumes.c:1178
   #2: ffff8880908cfce0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: close_fs_devices.part.0+0x2e/0x800 fs/btrfs/volumes.c:1159

  stack backtrace:
  CPU: 0 PID: 6878 Comm: syz-executor.0 Not tainted 5.9.0-rc5-syzkaller #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  Call Trace:
   __dump_stack lib/dump_stack.c:77 [inline]
   dump_stack+0x198/0x1fd lib/dump_stack.c:118
   check_noncircular+0x324/0x3e0 kernel/locking/lockdep.c:1827
   check_prev_add kernel/locking/lockdep.c:2496 [inline]
   check_prevs_add kernel/locking/lockdep.c:2601 [inline]
   validate_chain kernel/locking/lockdep.c:3218 [inline]
   __lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4426
   lock_acquire+0x1f3/0xae0 kernel/locking/lockdep.c:5006
   __mutex_lock_common kernel/locking/mutex.c:956 [inline]
   __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103
   blkdev_put+0x30/0x520 fs/block_dev.c:1804
   btrfs_close_bdev fs/btrfs/volumes.c:1117 [inline]
   btrfs_close_bdev fs/btrfs/volumes.c:1107 [inline]
   btrfs_close_one_device fs/btrfs/volumes.c:1133 [inline]
   close_fs_devices.part.0+0x1a4/0x800 fs/btrfs/volumes.c:1161
   close_fs_devices fs/btrfs/volumes.c:1193 [inline]
   btrfs_close_devices+0x95/0x1f0 fs/btrfs/volumes.c:1179
   close_ctree+0x688/0x6cb fs/btrfs/disk-io.c:4149
   generic_shutdown_super+0x144/0x370 fs/super.c:464
   kill_anon_super+0x36/0x60 fs/super.c:1108
   btrfs_kill_super+0x38/0x50 fs/btrfs/super.c:2265
   deactivate_locked_super+0x94/0x160 fs/super.c:335
   deactivate_super+0xad/0xd0 fs/super.c:366
   cleanup_mnt+0x3a3/0x530 fs/namespace.c:1118
   task_work_run+0xdd/0x190 kernel/task_work.c:141
   tracehook_notify_resume include/linux/tracehook.h:188 [inline]
   exit_to_user_mode_loop kernel/entry/common.c:163 [inline]
   exit_to_user_mode_prepare+0x1e1/0x200 kernel/entry/common.c:190
   syscall_exit_to_user_mode+0x7e/0x2e0 kernel/entry/common.c:265
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x460027
  RSP: 002b:00007fff59216328 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
  RAX: 0000000000000000 RBX: 0000000000076035 RCX: 0000000000460027
  RDX: 0000000000403188 RSI: 0000000000000002 RDI: 00007fff592163d0
  RBP: 0000000000000333 R08: 0000000000000000 R09: 000000000000000b
  R10: 0000000000000005 R11: 0000000000000246 R12: 00007fff59217460
  R13: 0000000002df2a60 R14: 0000000000000000 R15: 00007fff59217460

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
[ add syzbot reference ]
Signed-off-by: David Sterba <dsterba@suse.com>

…kernel/git/kvmarm/kvmarm into kvm-master

KVM/arm64 fixes for 5.9, take #3

- Fix synchronization of VTTBR update on TLB invalidation for nVHE systems

With SO_RCVLOWAT, under memory pressure,
it is possible to enter a state where:

1. We have not received enough bytes to satisfy SO_RCVLOWAT.
2. We have not entered buffer pressure (see tcp_rmem_pressure()).
3. But, we do not have enough buffer space to accept more packets.

In this case, we advertise 0 rwnd (due to #3) but the application does
not drain the receive queue (no wakeup because of #1 and #2) so the
flow stalls.

Modify the heuristic for SO_RCVLOWAT so that, if we are advertising
rwnd<=rcv_mss, force a wakeup to prevent a stall.

Without this patch, setting tcp_rmem to 6143 and disabling TCP
autotune causes a stalled flow. With this patch, no stall occurs. This
is with RPC-style traffic with large messages.

Fixes: 03f45c8 ("tcp: avoid extra wakeups for SO_RCVLOWAT users")
Signed-off-by: Arjun Roy <arjunroy@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20201023184709.217614-1-arjunroy.kdev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Dave reported a problem with my rwsem conversion patch where we got the
following lockdep splat:

  ======================================================
  WARNING: possible circular locking dependency detected
  5.9.0-default+ thesofproject#1297 Not tainted
  ------------------------------------------------------
  kswapd0/76 is trying to acquire lock:
  ffff9d5d25df2530 (&delayed_node->mutex){+.+.}-{3:3}, at: __btrfs_release_delayed_node.part.0+0x3f/0x320 [btrfs]

  but task is already holding lock:
  ffffffffa40cbba0 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x5/0x30

  which lock already depends on the new lock.

  the existing dependency chain (in reverse order) is:

  -> #4 (fs_reclaim){+.+.}-{0:0}:
	 __lock_acquire+0x582/0xac0
	 lock_acquire+0xca/0x430
	 fs_reclaim_acquire.part.0+0x25/0x30
	 kmem_cache_alloc+0x30/0x9c0
	 alloc_inode+0x81/0x90
	 iget_locked+0xcd/0x1a0
	 kernfs_get_inode+0x1b/0x130
	 kernfs_get_tree+0x136/0x210
	 sysfs_get_tree+0x1a/0x50
	 vfs_get_tree+0x1d/0xb0
	 path_mount+0x70f/0xa80
	 do_mount+0x75/0x90
	 __x64_sys_mount+0x8e/0xd0
	 do_syscall_64+0x2d/0x70
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> #3 (kernfs_mutex){+.+.}-{3:3}:
	 __lock_acquire+0x582/0xac0
	 lock_acquire+0xca/0x430
	 __mutex_lock+0xa0/0xaf0
	 kernfs_add_one+0x23/0x150
	 kernfs_create_dir_ns+0x58/0x80
	 sysfs_create_dir_ns+0x70/0xd0
	 kobject_add_internal+0xbb/0x2d0
	 kobject_add+0x7a/0xd0
	 btrfs_sysfs_add_block_group_type+0x141/0x1d0 [btrfs]
	 btrfs_read_block_groups+0x1f1/0x8c0 [btrfs]
	 open_ctree+0x981/0x1108 [btrfs]
	 btrfs_mount_root.cold+0xe/0xb0 [btrfs]
	 legacy_get_tree+0x2d/0x60
	 vfs_get_tree+0x1d/0xb0
	 fc_mount+0xe/0x40
	 vfs_kern_mount.part.0+0x71/0x90
	 btrfs_mount+0x13b/0x3e0 [btrfs]
	 legacy_get_tree+0x2d/0x60
	 vfs_get_tree+0x1d/0xb0
	 path_mount+0x70f/0xa80
	 do_mount+0x75/0x90
	 __x64_sys_mount+0x8e/0xd0
	 do_syscall_64+0x2d/0x70
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> #2 (btrfs-extent-00){++++}-{3:3}:
	 __lock_acquire+0x582/0xac0
	 lock_acquire+0xca/0x430
	 down_read_nested+0x45/0x220
	 __btrfs_tree_read_lock+0x35/0x1c0 [btrfs]
	 __btrfs_read_lock_root_node+0x3a/0x50 [btrfs]
	 btrfs_search_slot+0x6d4/0xfd0 [btrfs]
	 check_committed_ref+0x69/0x200 [btrfs]
	 btrfs_cross_ref_exist+0x65/0xb0 [btrfs]
	 run_delalloc_nocow+0x446/0x9b0 [btrfs]
	 btrfs_run_delalloc_range+0x61/0x6a0 [btrfs]
	 writepage_delalloc+0xae/0x160 [btrfs]
	 __extent_writepage+0x262/0x420 [btrfs]
	 extent_write_cache_pages+0x2b6/0x510 [btrfs]
	 extent_writepages+0x43/0x90 [btrfs]
	 do_writepages+0x40/0xe0
	 __writeback_single_inode+0x62/0x610
	 writeback_sb_inodes+0x20f/0x500
	 wb_writeback+0xef/0x4a0
	 wb_do_writeback+0x49/0x2e0
	 wb_workfn+0x81/0x340
	 process_one_work+0x233/0x5d0
	 worker_thread+0x50/0x3b0
	 kthread+0x137/0x150
	 ret_from_fork+0x1f/0x30

  -> #1 (btrfs-fs-00){++++}-{3:3}:
	 __lock_acquire+0x582/0xac0
	 lock_acquire+0xca/0x430
	 down_read_nested+0x45/0x220
	 __btrfs_tree_read_lock+0x35/0x1c0 [btrfs]
	 __btrfs_read_lock_root_node+0x3a/0x50 [btrfs]
	 btrfs_search_slot+0x6d4/0xfd0 [btrfs]
	 btrfs_lookup_inode+0x3a/0xc0 [btrfs]
	 __btrfs_update_delayed_inode+0x93/0x2c0 [btrfs]
	 __btrfs_commit_inode_delayed_items+0x7de/0x850 [btrfs]
	 __btrfs_run_delayed_items+0x8e/0x140 [btrfs]
	 btrfs_commit_transaction+0x367/0xbc0 [btrfs]
	 btrfs_mksubvol+0x2db/0x470 [btrfs]
	 btrfs_mksnapshot+0x7b/0xb0 [btrfs]
	 __btrfs_ioctl_snap_create+0x16f/0x1a0 [btrfs]
	 btrfs_ioctl_snap_create_v2+0xb0/0xf0 [btrfs]
	 btrfs_ioctl+0xd0b/0x2690 [btrfs]
	 __x64_sys_ioctl+0x6f/0xa0
	 do_syscall_64+0x2d/0x70
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> #0 (&delayed_node->mutex){+.+.}-{3:3}:
	 check_prev_add+0x91/0xc60
	 validate_chain+0xa6e/0x2a20
	 __lock_acquire+0x582/0xac0
	 lock_acquire+0xca/0x430
	 __mutex_lock+0xa0/0xaf0
	 __btrfs_release_delayed_node.part.0+0x3f/0x320 [btrfs]
	 btrfs_evict_inode+0x3cc/0x560 [btrfs]
	 evict+0xd6/0x1c0
	 dispose_list+0x48/0x70
	 prune_icache_sb+0x54/0x80
	 super_cache_scan+0x121/0x1a0
	 do_shrink_slab+0x16d/0x3b0
	 shrink_slab+0xb1/0x2e0
	 shrink_node+0x230/0x6a0
	 balance_pgdat+0x325/0x750
	 kswapd+0x206/0x4d0
	 kthread+0x137/0x150
	 ret_from_fork+0x1f/0x30

  other info that might help us debug this:

  Chain exists of:
    &delayed_node->mutex --> kernfs_mutex --> fs_reclaim

   Possible unsafe locking scenario:

	 CPU0                    CPU1
	 ----                    ----
    lock(fs_reclaim);
				 lock(kernfs_mutex);
				 lock(fs_reclaim);
    lock(&delayed_node->mutex);

   *** DEADLOCK ***

  3 locks held by kswapd0/76:
   #0: ffffffffa40cbba0 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x5/0x30
   #1: ffffffffa40b8b58 (shrinker_rwsem){++++}-{3:3}, at: shrink_slab+0x54/0x2e0
   #2: ffff9d5d322390e8 (&type->s_umount_key#26){++++}-{3:3}, at: trylock_super+0x16/0x50

  stack backtrace:
  CPU: 2 PID: 76 Comm: kswapd0 Not tainted 5.9.0-default+ thesofproject#1297
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014
  Call Trace:
   dump_stack+0x77/0x97
   check_noncircular+0xff/0x110
   ? save_trace+0x50/0x470
   check_prev_add+0x91/0xc60
   validate_chain+0xa6e/0x2a20
   ? save_trace+0x50/0x470
   __lock_acquire+0x582/0xac0
   lock_acquire+0xca/0x430
   ? __btrfs_release_delayed_node.part.0+0x3f/0x320 [btrfs]
   __mutex_lock+0xa0/0xaf0
   ? __btrfs_release_delayed_node.part.0+0x3f/0x320 [btrfs]
   ? __lock_acquire+0x582/0xac0
   ? __btrfs_release_delayed_node.part.0+0x3f/0x320 [btrfs]
   ? btrfs_evict_inode+0x30b/0x560 [btrfs]
   ? __btrfs_release_delayed_node.part.0+0x3f/0x320 [btrfs]
   __btrfs_release_delayed_node.part.0+0x3f/0x320 [btrfs]
   btrfs_evict_inode+0x3cc/0x560 [btrfs]
   evict+0xd6/0x1c0
   dispose_list+0x48/0x70
   prune_icache_sb+0x54/0x80
   super_cache_scan+0x121/0x1a0
   do_shrink_slab+0x16d/0x3b0
   shrink_slab+0xb1/0x2e0
   shrink_node+0x230/0x6a0
   balance_pgdat+0x325/0x750
   kswapd+0x206/0x4d0
   ? finish_wait+0x90/0x90
   ? balance_pgdat+0x750/0x750
   kthread+0x137/0x150
   ? kthread_mod_delayed_work+0xc0/0xc0
   ret_from_fork+0x1f/0x30

This happens because we are still holding the path open when we start
adding the sysfs files for the block groups, which creates a dependency
on fs_reclaim via the tree lock.  Fix this by dropping the path before
we start doing anything with sysfs.

Reported-by: David Sterba <dsterba@suse.com>
CC: stable@vger.kernel.org # 5.8+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Very sporadically I had test case btrfs/069 from fstests hanging (for
years, it is not a recent regression), with the following traces in
dmesg/syslog:

  [162301.160628] BTRFS info (device sdc): dev_replace from /dev/sdd (devid 2) to /dev/sdg started
  [162301.181196] BTRFS info (device sdc): scrub: finished on devid 4 with status: 0
  [162301.287162] BTRFS info (device sdc): dev_replace from /dev/sdd (devid 2) to /dev/sdg finished
  [162513.513792] INFO: task btrfs-transacti:1356167 blocked for more than 120 seconds.
  [162513.514318]       Not tainted 5.9.0-rc6-btrfs-next-69 #1
  [162513.514522] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [162513.514747] task:btrfs-transacti state:D stack:    0 pid:1356167 ppid:     2 flags:0x00004000
  [162513.514751] Call Trace:
  [162513.514761]  __schedule+0x5ce/0xd00
  [162513.514765]  ? _raw_spin_unlock_irqrestore+0x3c/0x60
  [162513.514771]  schedule+0x46/0xf0
  [162513.514844]  wait_current_trans+0xde/0x140 [btrfs]
  [162513.514850]  ? finish_wait+0x90/0x90
  [162513.514864]  start_transaction+0x37c/0x5f0 [btrfs]
  [162513.514879]  transaction_kthread+0xa4/0x170 [btrfs]
  [162513.514891]  ? btrfs_cleanup_transaction+0x660/0x660 [btrfs]
  [162513.514894]  kthread+0x153/0x170
  [162513.514897]  ? kthread_stop+0x2c0/0x2c0
  [162513.514902]  ret_from_fork+0x22/0x30
  [162513.514916] INFO: task fsstress:1356184 blocked for more than 120 seconds.
  [162513.515192]       Not tainted 5.9.0-rc6-btrfs-next-69 #1
  [162513.515431] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [162513.515680] task:fsstress        state:D stack:    0 pid:1356184 ppid:1356177 flags:0x00004000
  [162513.515682] Call Trace:
  [162513.515688]  __schedule+0x5ce/0xd00
  [162513.515691]  ? _raw_spin_unlock_irqrestore+0x3c/0x60
  [162513.515697]  schedule+0x46/0xf0
  [162513.515712]  wait_current_trans+0xde/0x140 [btrfs]
  [162513.515716]  ? finish_wait+0x90/0x90
  [162513.515729]  start_transaction+0x37c/0x5f0 [btrfs]
  [162513.515743]  btrfs_attach_transaction_barrier+0x1f/0x50 [btrfs]
  [162513.515753]  btrfs_sync_fs+0x61/0x1c0 [btrfs]
  [162513.515758]  ? __ia32_sys_fdatasync+0x20/0x20
  [162513.515761]  iterate_supers+0x87/0xf0
  [162513.515765]  ksys_sync+0x60/0xb0
  [162513.515768]  __do_sys_sync+0xa/0x10
  [162513.515771]  do_syscall_64+0x33/0x80
  [162513.515774]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
  [162513.515781] RIP: 0033:0x7f5238f50bd7
  [162513.515782] Code: Bad RIP value.
  [162513.515784] RSP: 002b:00007fff67b978e8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a2
  [162513.515786] RAX: ffffffffffffffda RBX: 000055b1fad2c560 RCX: 00007f5238f50bd7
  [162513.515788] RDX: 00000000ffffffff RSI: 000000000daf0e74 RDI: 000000000000003a
  [162513.515789] RBP: 0000000000000032 R08: 000000000000000a R09: 00007f5239019be0
  [162513.515791] R10: fffffffffffff24f R11: 0000000000000206 R12: 000000000000003a
  [162513.515792] R13: 00007fff67b97950 R14: 00007fff67b97906 R15: 000055b1fad1a340
  [162513.515804] INFO: task fsstress:1356185 blocked for more than 120 seconds.
  [162513.516064]       Not tainted 5.9.0-rc6-btrfs-next-69 #1
  [162513.516329] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [162513.516617] task:fsstress        state:D stack:    0 pid:1356185 ppid:1356177 flags:0x00000000
  [162513.516620] Call Trace:
  [162513.516625]  __schedule+0x5ce/0xd00
  [162513.516628]  ? _raw_spin_unlock_irqrestore+0x3c/0x60
  [162513.516634]  schedule+0x46/0xf0
  [162513.516647]  wait_current_trans+0xde/0x140 [btrfs]
  [162513.516650]  ? finish_wait+0x90/0x90
  [162513.516662]  start_transaction+0x4d7/0x5f0 [btrfs]
  [162513.516679]  btrfs_setxattr_trans+0x3c/0x100 [btrfs]
  [162513.516686]  __vfs_setxattr+0x66/0x80
  [162513.516691]  __vfs_setxattr_noperm+0x70/0x200
  [162513.516697]  vfs_setxattr+0x6b/0x120
  [162513.516703]  setxattr+0x125/0x240
  [162513.516709]  ? lock_acquire+0xb1/0x480
  [162513.516712]  ? mnt_want_write+0x20/0x50
  [162513.516721]  ? rcu_read_lock_any_held+0x8e/0xb0
  [162513.516723]  ? preempt_count_add+0x49/0xa0
  [162513.516725]  ? __sb_start_write+0x19b/0x290
  [162513.516727]  ? preempt_count_add+0x49/0xa0
  [162513.516732]  path_setxattr+0xba/0xd0
  [162513.516739]  __x64_sys_setxattr+0x27/0x30
  [162513.516741]  do_syscall_64+0x33/0x80
  [162513.516743]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
  [162513.516745] RIP: 0033:0x7f5238f56d5a
  [162513.516746] Code: Bad RIP value.
  [162513.516748] RSP: 002b:00007fff67b97868 EFLAGS: 00000202 ORIG_RAX: 00000000000000bc
  [162513.516750] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f5238f56d5a
  [162513.516751] RDX: 000055b1fbb0d5a0 RSI: 00007fff67b978a0 RDI: 000055b1fbb0d470
  [162513.516753] RBP: 000055b1fbb0d5a0 R08: 0000000000000001 R09: 00007fff67b97700
  [162513.516754] R10: 0000000000000004 R11: 0000000000000202 R12: 0000000000000004
  [162513.516756] R13: 0000000000000024 R14: 0000000000000001 R15: 00007fff67b978a0
  [162513.516767] INFO: task fsstress:1356196 blocked for more than 120 seconds.
  [162513.517064]       Not tainted 5.9.0-rc6-btrfs-next-69 #1
  [162513.517365] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [162513.517763] task:fsstress        state:D stack:    0 pid:1356196 ppid:1356177 flags:0x00004000
  [162513.517780] Call Trace:
  [162513.517786]  __schedule+0x5ce/0xd00
  [162513.517789]  ? _raw_spin_unlock_irqrestore+0x3c/0x60
  [162513.517796]  schedule+0x46/0xf0
  [162513.517810]  wait_current_trans+0xde/0x140 [btrfs]
  [162513.517814]  ? finish_wait+0x90/0x90
  [162513.517829]  start_transaction+0x37c/0x5f0 [btrfs]
  [162513.517845]  btrfs_attach_transaction_barrier+0x1f/0x50 [btrfs]
  [162513.517857]  btrfs_sync_fs+0x61/0x1c0 [btrfs]
  [162513.517862]  ? __ia32_sys_fdatasync+0x20/0x20
  [162513.517865]  iterate_supers+0x87/0xf0
  [162513.517869]  ksys_sync+0x60/0xb0
  [162513.517872]  __do_sys_sync+0xa/0x10
  [162513.517875]  do_syscall_64+0x33/0x80
  [162513.517878]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
  [162513.517881] RIP: 0033:0x7f5238f50bd7
  [162513.517883] Code: Bad RIP value.
  [162513.517885] RSP: 002b:00007fff67b978e8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a2
  [162513.517887] RAX: ffffffffffffffda RBX: 000055b1fad2c560 RCX: 00007f5238f50bd7
  [162513.517889] RDX: 0000000000000000 RSI: 000000007660add2 RDI: 0000000000000053
  [162513.517891] RBP: 0000000000000032 R08: 0000000000000067 R09: 00007f5239019be0
  [162513.517893] R10: fffffffffffff24f R11: 0000000000000206 R12: 0000000000000053
  [162513.517895] R13: 00007fff67b97950 R14: 00007fff67b97906 R15: 000055b1fad1a340
  [162513.517908] INFO: task fsstress:1356197 blocked for more than 120 seconds.
  [162513.518298]       Not tainted 5.9.0-rc6-btrfs-next-69 #1
  [162513.518672] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [162513.519157] task:fsstress        state:D stack:    0 pid:1356197 ppid:1356177 flags:0x00000000
  [162513.519160] Call Trace:
  [162513.519165]  __schedule+0x5ce/0xd00
  [162513.519168]  ? _raw_spin_unlock_irqrestore+0x3c/0x60
  [162513.519174]  schedule+0x46/0xf0
  [162513.519190]  wait_current_trans+0xde/0x140 [btrfs]
  [162513.519193]  ? finish_wait+0x90/0x90
  [162513.519206]  start_transaction+0x4d7/0x5f0 [btrfs]
  [162513.519222]  btrfs_create+0x57/0x200 [btrfs]
  [162513.519230]  lookup_open+0x522/0x650
  [162513.519246]  path_openat+0x2b8/0xa50
  [162513.519270]  do_filp_open+0x91/0x100
  [162513.519275]  ? find_held_lock+0x32/0x90
  [162513.519280]  ? lock_acquired+0x33b/0x470
  [162513.519285]  ? do_raw_spin_unlock+0x4b/0xc0
  [162513.519287]  ? _raw_spin_unlock+0x29/0x40
  [162513.519295]  do_sys_openat2+0x20d/0x2d0
  [162513.519300]  do_sys_open+0x44/0x80
  [162513.519304]  do_syscall_64+0x33/0x80
  [162513.519307]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
  [162513.519309] RIP: 0033:0x7f5238f4a903
  [162513.519310] Code: Bad RIP value.
  [162513.519312] RSP: 002b:00007fff67b97758 EFLAGS: 00000246 ORIG_RAX: 0000000000000055
  [162513.519314] RAX: ffffffffffffffda RBX: 00000000ffffffff RCX: 00007f5238f4a903
  [162513.519316] RDX: 0000000000000000 RSI: 00000000000001b6 RDI: 000055b1fbb0d470
  [162513.519317] RBP: 00007fff67b978c0 R08: 0000000000000001 R09: 0000000000000002
  [162513.519319] R10: 00007fff67b974f7 R11: 0000000000000246 R12: 0000000000000013
  [162513.519320] R13: 00000000000001b6 R14: 00007fff67b97906 R15: 000055b1fad1c620
  [162513.519332] INFO: task btrfs:1356211 blocked for more than 120 seconds.
  [162513.519727]       Not tainted 5.9.0-rc6-btrfs-next-69 #1
  [162513.520115] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [162513.520508] task:btrfs           state:D stack:    0 pid:1356211 ppid:1356178 flags:0x00004002
  [162513.520511] Call Trace:
  [162513.520516]  __schedule+0x5ce/0xd00
  [162513.520519]  ? _raw_spin_unlock_irqrestore+0x3c/0x60
  [162513.520525]  schedule+0x46/0xf0
  [162513.520544]  btrfs_scrub_pause+0x11f/0x180 [btrfs]
  [162513.520548]  ? finish_wait+0x90/0x90
  [162513.520562]  btrfs_commit_transaction+0x45a/0xc30 [btrfs]
  [162513.520574]  ? start_transaction+0xe0/0x5f0 [btrfs]
  [162513.520596]  btrfs_dev_replace_finishing+0x6d8/0x711 [btrfs]
  [162513.520619]  btrfs_dev_replace_by_ioctl.cold+0x1cc/0x1fd [btrfs]
  [162513.520639]  btrfs_ioctl+0x2a25/0x36f0 [btrfs]
  [162513.520643]  ? do_sigaction+0xf3/0x240
  [162513.520645]  ? find_held_lock+0x32/0x90
  [162513.520648]  ? do_sigaction+0xf3/0x240
  [162513.520651]  ? lock_acquired+0x33b/0x470
  [162513.520655]  ? _raw_spin_unlock_irq+0x24/0x50
  [162513.520657]  ? lockdep_hardirqs_on+0x7d/0x100
  [162513.520660]  ? _raw_spin_unlock_irq+0x35/0x50
  [162513.520662]  ? do_sigaction+0xf3/0x240
  [162513.520671]  ? __x64_sys_ioctl+0x83/0xb0
  [162513.520672]  __x64_sys_ioctl+0x83/0xb0
  [162513.520677]  do_syscall_64+0x33/0x80
  [162513.520679]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
  [162513.520681] RIP: 0033:0x7fc3cd307d87
  [162513.520682] Code: Bad RIP value.
  [162513.520684] RSP: 002b:00007ffe30a56bb8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
  [162513.520686] RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007fc3cd307d87
  [162513.520687] RDX: 00007ffe30a57a30 RSI: 00000000ca289435 RDI: 0000000000000003
  [162513.520689] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
  [162513.520690] R10: 0000000000000008 R11: 0000000000000202 R12: 0000000000000003
  [162513.520692] R13: 0000557323a212e0 R14: 00007ffe30a5a520 R15: 0000000000000001
  [162513.520703]
		  Showing all locks held in the system:
  [162513.520712] 1 lock held by khungtaskd/54:
  [162513.520713]  #0: ffffffffb40a91a0 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x15/0x197
  [162513.520728] 1 lock held by in:imklog/596:
  [162513.520729]  #0: ffff8f3f0d781400 (&f->f_pos_lock){+.+.}-{3:3}, at: __fdget_pos+0x4d/0x60
  [162513.520782] 1 lock held by btrfs-transacti/1356167:
  [162513.520784]  #0: ffff8f3d810cc848 (&fs_info->transaction_kthread_mutex){+.+.}-{3:3}, at: transaction_kthread+0x4a/0x170 [btrfs]
  [162513.520798] 1 lock held by btrfs/1356190:
  [162513.520800]  #0: ffff8f3d57644470 (sb_writers#15){.+.+}-{0:0}, at: mnt_want_write_file+0x22/0x60
  [162513.520805] 1 lock held by fsstress/1356184:
  [162513.520806]  #0: ffff8f3d576440e8 (&type->s_umount_key#62){++++}-{3:3}, at: iterate_supers+0x6f/0xf0
  [162513.520811] 3 locks held by fsstress/1356185:
  [162513.520812]  #0: ffff8f3d57644470 (sb_writers#15){.+.+}-{0:0}, at: mnt_want_write+0x20/0x50
  [162513.520815]  #1: ffff8f3d80a650b8 (&type->i_mutex_dir_key#10){++++}-{3:3}, at: vfs_setxattr+0x50/0x120
  [162513.520820]  #2: ffff8f3d57644690 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40e/0x5f0 [btrfs]
  [162513.520833] 1 lock held by fsstress/1356196:
  [162513.520834]  #0: ffff8f3d576440e8 (&type->s_umount_key#62){++++}-{3:3}, at: iterate_supers+0x6f/0xf0
  [162513.520838] 3 locks held by fsstress/1356197:
  [162513.520839]  #0: ffff8f3d57644470 (sb_writers#15){.+.+}-{0:0}, at: mnt_want_write+0x20/0x50
  [162513.520843]  #1: ffff8f3d506465e8 (&type->i_mutex_dir_key#10){++++}-{3:3}, at: path_openat+0x2a7/0xa50
  [162513.520846]  #2: ffff8f3d57644690 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40e/0x5f0 [btrfs]
  [162513.520858] 2 locks held by btrfs/1356211:
  [162513.520859]  #0: ffff8f3d810cde30 (&fs_info->dev_replace.lock_finishing_cancel_unmount){+.+.}-{3:3}, at: btrfs_dev_replace_finishing+0x52/0x711 [btrfs]
  [162513.520877]  #1: ffff8f3d57644690 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40e/0x5f0 [btrfs]

This was weird because the stack traces show that a transaction commit,
triggered by a device replace operation, is blocking trying to pause any
running scrubs but there are no stack traces of blocked tasks doing a
scrub.

After poking around with drgn, I noticed there was a scrub task that was
constantly running and blocking for shorts periods of time:

  >>> t = find_task(prog, 1356190)
  >>> prog.stack_trace(t)
  #0  __schedule+0x5ce/0xcfc
  #1  schedule+0x46/0xe4
  #2  schedule_timeout+0x1df/0x475
  #3  btrfs_reada_wait+0xda/0x132
  #4  scrub_stripe+0x2a8/0x112f
  #5  scrub_chunk+0xcd/0x134
  thesofproject#6  scrub_enumerate_chunks+0x29e/0x5ee
  thesofproject#7  btrfs_scrub_dev+0x2d5/0x91b
  thesofproject#8  btrfs_ioctl+0x7f5/0x36e7
  thesofproject#9  __x64_sys_ioctl+0x83/0xb0
  thesofproject#10 do_syscall_64+0x33/0x77
  thesofproject#11 entry_SYSCALL_64+0x7c/0x156

Which corresponds to:

int btrfs_reada_wait(void *handle)
{
    struct reada_control *rc = handle;
    struct btrfs_fs_info *fs_info = rc->fs_info;

    while (atomic_read(&rc->elems)) {
        if (!atomic_read(&fs_info->reada_works_cnt))
            reada_start_machine(fs_info);
        wait_event_timeout(rc->wait, atomic_read(&rc->elems) == 0,
                          (HZ + 9) / 10);
    }
(...)

So the counter "rc->elems" was set to 1 and never decreased to 0, causing
the scrub task to loop forever in that function. Then I used the following
script for drgn to check the readahead requests:

  $ cat dump_reada.py
  import sys
  import drgn
  from drgn import NULL, Object, cast, container_of, execscript, \
      reinterpret, sizeof
  from drgn.helpers.linux import *

  mnt_path = b"/home/fdmanana/btrfs-tests/scratch_1"

  mnt = None
  for mnt in for_each_mount(prog, dst = mnt_path):
      pass

  if mnt is None:
      sys.stderr.write(f'Error: mount point {mnt_path} not found\n')
      sys.exit(1)

  fs_info = cast('struct btrfs_fs_info *', mnt.mnt.mnt_sb.s_fs_info)

  def dump_re(re):
      nzones = re.nzones.value_()
      print(f're at {hex(re.value_())}')
      print(f'\t logical {re.logical.value_()}')
      print(f'\t refcnt {re.refcnt.value_()}')
      print(f'\t nzones {nzones}')
      for i in range(nzones):
          dev = re.zones[i].device
          name = dev.name.str.string_()
          print(f'\t\t dev id {dev.devid.value_()} name {name}')
      print()

  for _, e in radix_tree_for_each(fs_info.reada_tree):
      re = cast('struct reada_extent *', e)
      dump_re(re)

  $ drgn dump_reada.py
  re at 0xffff8f3da9d25ad8
          logical 38928384
          refcnt 1
          nzones 1
                 dev id 0 name b'/dev/sdd'
  $

So there was one readahead extent with a single zone corresponding to the
source device of that last device replace operation logged in dmesg/syslog.
Also the ID of that zone's device was 0 which is a special value set in
the source device of a device replace operation when the operation finishes
(constant BTRFS_DEV_REPLACE_DEVID set at btrfs_dev_replace_finishing()),
confirming again that device /dev/sdd was the source of a device replace
operation.

Normally there should be as many zones in the readahead extent as there are
devices, and I wasn't expecting the extent to be in a block group with a
'single' profile, so I went and confirmed with the following drgn script
that there weren't any single profile block groups:

  $ cat dump_block_groups.py
  import sys
  import drgn
  from drgn import NULL, Object, cast, container_of, execscript, \
      reinterpret, sizeof
  from drgn.helpers.linux import *

  mnt_path = b"/home/fdmanana/btrfs-tests/scratch_1"

  mnt = None
  for mnt in for_each_mount(prog, dst = mnt_path):
      pass

  if mnt is None:
      sys.stderr.write(f'Error: mount point {mnt_path} not found\n')
      sys.exit(1)

  fs_info = cast('struct btrfs_fs_info *', mnt.mnt.mnt_sb.s_fs_info)

  BTRFS_BLOCK_GROUP_DATA = (1 << 0)
  BTRFS_BLOCK_GROUP_SYSTEM = (1 << 1)
  BTRFS_BLOCK_GROUP_METADATA = (1 << 2)
  BTRFS_BLOCK_GROUP_RAID0 = (1 << 3)
  BTRFS_BLOCK_GROUP_RAID1 = (1 << 4)
  BTRFS_BLOCK_GROUP_DUP = (1 << 5)
  BTRFS_BLOCK_GROUP_RAID10 = (1 << 6)
  BTRFS_BLOCK_GROUP_RAID5 = (1 << 7)
  BTRFS_BLOCK_GROUP_RAID6 = (1 << 8)
  BTRFS_BLOCK_GROUP_RAID1C3 = (1 << 9)
  BTRFS_BLOCK_GROUP_RAID1C4 = (1 << 10)

  def bg_flags_string(bg):
      flags = bg.flags.value_()
      ret = ''
      if flags & BTRFS_BLOCK_GROUP_DATA:
          ret = 'data'
      if flags & BTRFS_BLOCK_GROUP_METADATA:
          if len(ret) > 0:
              ret += '|'
          ret += 'meta'
      if flags & BTRFS_BLOCK_GROUP_SYSTEM:
          if len(ret) > 0:
              ret += '|'
          ret += 'system'
      if flags & BTRFS_BLOCK_GROUP_RAID0:
          ret += ' raid0'
      elif flags & BTRFS_BLOCK_GROUP_RAID1:
          ret += ' raid1'
      elif flags & BTRFS_BLOCK_GROUP_DUP:
          ret += ' dup'
      elif flags & BTRFS_BLOCK_GROUP_RAID10:
          ret += ' raid10'
      elif flags & BTRFS_BLOCK_GROUP_RAID5:
          ret += ' raid5'
      elif flags & BTRFS_BLOCK_GROUP_RAID6:
          ret += ' raid6'
      elif flags & BTRFS_BLOCK_GROUP_RAID1C3:
          ret += ' raid1c3'
      elif flags & BTRFS_BLOCK_GROUP_RAID1C4:
          ret += ' raid1c4'
      else:
          ret += ' single'

      return ret

  def dump_bg(bg):
      print()
      print(f'block group at {hex(bg.value_())}')
      print(f'\t start {bg.start.value_()} length {bg.length.value_()}')
      print(f'\t flags {bg.flags.value_()} - {bg_flags_string(bg)}')

  bg_root = fs_info.block_group_cache_tree.address_of_()
  for bg in rbtree_inorder_for_each_entry('struct btrfs_block_group', bg_root, 'cache_node'):
      dump_bg(bg)

  $ drgn dump_block_groups.py

  block group at 0xffff8f3d673b0400
         start 22020096 length 16777216
         flags 258 - system raid6

  block group at 0xffff8f3d53ddb400
         start 38797312 length 536870912
         flags 260 - meta raid6

  block group at 0xffff8f3d5f4d9c00
         start 575668224 length 2147483648
         flags 257 - data raid6

  block group at 0xffff8f3d08189000
         start 2723151872 length 67108864
         flags 258 - system raid6

  block group at 0xffff8f3db70ff000
         start 2790260736 length 1073741824
         flags 260 - meta raid6

  block group at 0xffff8f3d5f4dd800
         start 3864002560 length 67108864
         flags 258 - system raid6

  block group at 0xffff8f3d67037000
         start 3931111424 length 2147483648
         flags 257 - data raid6
  $

So there were only 2 reasons left for having a readahead extent with a
single zone: reada_find_zone(), called when creating a readahead extent,
returned NULL either because we failed to find the corresponding block
group or because a memory allocation failed. With some additional and
custom tracing I figured out that on every further ocurrence of the
problem the block group had just been deleted when we were looping to
create the zones for the readahead extent (at reada_find_extent()), so we
ended up with only one zone in the readahead extent, corresponding to a
device that ends up getting replaced.

So after figuring that out it became obvious why the hang happens:

1) Task A starts a scrub on any device of the filesystem, except for
   device /dev/sdd;

2) Task B starts a device replace with /dev/sdd as the source device;

3) Task A calls btrfs_reada_add() from scrub_stripe() and it is currently
   starting to scrub a stripe from block group X. This call to
   btrfs_reada_add() is the one for the extent tree. When btrfs_reada_add()
   calls reada_add_block(), it passes the logical address of the extent
   tree's root node as its 'logical' argument - a value of 38928384;

4) Task A then enters reada_find_extent(), called from reada_add_block().
   It finds there isn't any existing readahead extent for the logical
   address 38928384, so it proceeds to the path of creating a new one.

   It calls btrfs_map_block() to find out which stripes exist for the block
   group X. On the first iteration of the for loop that iterates over the
   stripes, it finds the stripe for device /dev/sdd, so it creates one
   zone for that device and adds it to the readahead extent. Before getting
   into the second iteration of the loop, the cleanup kthread deletes block
   group X because it was empty. So in the iterations for the remaining
   stripes it does not add more zones to the readahead extent, because the
   calls to reada_find_zone() returned NULL because they couldn't find
   block group X anymore.

   As a result the new readahead extent has a single zone, corresponding to
   the device /dev/sdd;

4) Before task A returns to btrfs_reada_add() and queues the readahead job
   for the readahead work queue, task B finishes the device replace and at
   btrfs_dev_replace_finishing() swaps the device /dev/sdd with the new
   device /dev/sdg;

5) Task A returns to reada_add_block(), which increments the counter
   "->elems" of the reada_control structure allocated at btrfs_reada_add().

   Then it returns back to btrfs_reada_add() and calls
   reada_start_machine(). This queues a job in the readahead work queue to
   run the function reada_start_machine_worker(), which calls
   __reada_start_machine().

   At __reada_start_machine() we take the device list mutex and for each
   device found in the current device list, we call
   reada_start_machine_dev() to start the readahead work. However at this
   point the device /dev/sdd was already freed and is not in the device
   list anymore.

   This means the corresponding readahead for the extent at 38928384 is
   never started, and therefore the "->elems" counter of the reada_control
   structure allocated at btrfs_reada_add() never goes down to 0, causing
   the call to btrfs_reada_wait(), done by the scrub task, to wait forever.

Note that the readahead request can be made either after the device replace
started or before it started, however in pratice it is very unlikely that a
device replace is able to start after a readahead request is made and is
able to complete before the readahead request completes - maybe only on a
very small and nearly empty filesystem.

This hang however is not the only problem we can have with readahead and
device removals. When the readahead extent has other zones other than the
one corresponding to the device that is being removed (either by a device
replace or a device remove operation), we risk having a use-after-free on
the device when dropping the last reference of the readahead extent.

For example if we create a readahead extent with two zones, one for the
device /dev/sdd and one for the device /dev/sde:

1) Before the readahead worker starts, the device /dev/sdd is removed,
   and the corresponding btrfs_device structure is freed. However the
   readahead extent still has the zone pointing to the device structure;

2) When the readahead worker starts, it only finds device /dev/sde in the
   current device list of the filesystem;

3) It starts the readahead work, at reada_start_machine_dev(), using the
   device /dev/sde;

4) Then when it finishes reading the extent from device /dev/sde, it calls
   __readahead_hook() which ends up dropping the last reference on the
   readahead extent through the last call to reada_extent_put();

5) At reada_extent_put() it iterates over each zone of the readahead extent
   and attempts to delete an element from the device's 'reada_extents'
   radix tree, resulting in a use-after-free, as the device pointer of the
   zone for /dev/sdd is now stale. We can also access the device after
   dropping the last reference of a zone, through reada_zone_release(),
   also called by reada_extent_put().

And a device remove suffers the same problem, however since it shrinks the
device size down to zero before removing the device, it is very unlikely to
still have readahead requests not completed by the time we free the device,
the only possibility is if the device has a very little space allocated.

While the hang problem is exclusive to scrub, since it is currently the
only user of btrfs_reada_add() and btrfs_reada_wait(), the use-after-free
problem affects any path that triggers readhead, which includes
btree_readahead_hook() and __readahead_hook() (a readahead worker can
trigger readahed for the children of a node) for example - any path that
ends up calling reada_add_block() can trigger the use-after-free after a
device is removed.

So fix this by waiting for any readahead requests for a device to complete
before removing a device, ensuring that while waiting for existing ones no
new ones can be made.

This problem has been around for a very long time - the readahead code was
added in 2011, device remove exists since 2008 and device replace was
introduced in 2013, hard to pick a specific commit for a git Fixes tag.

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>