fix(tui): honor display.busy_input_mode in TUI v2#17110
Merged
Conversation
11820a8 to
8b67c68
Compare
Contributor
There was a problem hiding this comment.
Pull request overview
Wires display.busy_input_mode from config into the TUI v2 frontend so “send while busy” behavior matches the rest of the project (CLI/gateway), instead of always queueing.
Changes:
- Adds
UiState.busyInputMode(defaultinterrupt) and normalizesdisplay.busy_input_modeduring config sync. - Updates submission dispatch to honor
queuevssteervsinterruptvia a sharedhandleBusyInputhelper. - Adds unit tests for
normalizeBusyInputModeandapplyDisplaypropagation/fallback behavior.
Reviewed changes
Copilot reviewed 6 out of 6 changed files in this pull request and generated 3 comments.
Show a summary per file
| File | Description |
|---|---|
| ui-tui/src/gatewayTypes.ts | Adds display.busy_input_mode to the config type surface. |
| ui-tui/src/app/useSubmission.ts | Implements mode-specific handling when submitting while a turn is busy (queue/steer/interrupt). |
| ui-tui/src/app/useConfigSync.ts | Normalizes busy_input_mode and applies it into UI state during config polling. |
| ui-tui/src/app/uiStore.ts | Adds busyInputMode default to the UI store initial state. |
| ui-tui/src/app/interfaces.ts | Introduces BusyInputMode and adds busyInputMode to UiState. |
| ui-tui/src/tests/useConfigSync.test.ts | Adds tests for normalization and UI-state fan-out for busy_input_mode. |
💡 Add Copilot custom instructions for smarter, more guided reviews. Learn how to get started.
8b67c68 to
966df2b
Compare
Contributor
There was a problem hiding this comment.
Pull request overview
Copilot reviewed 6 out of 6 changed files in this pull request and generated 1 comment.
💡 Add Copilot custom instructions for smarter, more guided reviews. Learn how to get started.
The TUI v2 frontend hard-coded `composerActions.enqueue(full)` whenever
`ui.busy` was true. The classic CLI and gateway adapters honor the
`display.busy_input_mode` config key (`interrupt` | `queue` | `steer`),
but Ink ignored it — sending a message during a long-running turn always
landed in the queue regardless of config. The config default is already
`interrupt` (hermes_cli/config.py), so users who explicitly opted into
that experience were silently stuck on the legacy queue path.
This wires the value through the existing config-sync surface:
* `applyDisplay` now reads `display.busy_input_mode`, defaults to
`interrupt` (matching `_load_busy_input_mode` in tui_gateway), and
drops it into a new `UiState.busyInputMode` field.
* `dispatchSubmission` and the queue-edit fall-through call a shared
`handleBusyInput` helper that branches on the mode:
* `queue` — legacy behavior, append to the queue.
* `steer` — call `session.steer`; on rejection, fall back to
queue with a sys note.
* `interrupt` — `turnController.interruptTurn(...)` then `send()`,
so the new prompt actually moves.
* Mtime polling in `useConfigSync` already re-applies `config.full`, so
flipping `display.busy_input_mode` in `~/.hermes/config.yaml` takes
effect on the next 5s tick without restarting the TUI.
Tests:
* `applyDisplay → busy_input_mode` covers normalization + UiState fan-out.
* `normalizeBusyInputMode` mirrors the Python side's allow-list.
Validation:
* `npm run type-check` (in `ui-tui/`) — clean.
* `npm test --run` (in `ui-tui/`) — 394/394.
966df2b to
42733ba
Compare
42733ba to
d1d22e1
Compare
Contributor
There was a problem hiding this comment.
Pull request overview
Copilot reviewed 6 out of 6 changed files in this pull request and generated no new comments.
💡 Add Copilot custom instructions for smarter, more guided reviews. Learn how to get started.
In a full-screen TUI users typically author the next prompt while the agent is still streaming, so an unintended interrupt loses in-flight typing. TUI fallback now defaults to `queue`; CLI / messaging adapters keep `interrupt` as the framework default. Override per-config via `display.busy_input_mode: interrupt` (or `steer`) — the normalize/wire path is unchanged, only the missing- value branch differs from the Python default. uiStore initial value also flipped to `queue` so first-frame render before `config.full` lands matches the eventual normalized value.
ulasbilgen
pushed a commit
to ulasbilgen/hermes-adhd-agent
that referenced
this pull request
May 1, 2026
* fix(tui): honor display.busy_input_mode in TUI v2
The TUI v2 frontend hard-coded `composerActions.enqueue(full)` whenever
`ui.busy` was true. The classic CLI and gateway adapters honor the
`display.busy_input_mode` config key (`interrupt` | `queue` | `steer`),
but Ink ignored it — sending a message during a long-running turn always
landed in the queue regardless of config. The config default is already
`interrupt` (hermes_cli/config.py), so users who explicitly opted into
that experience were silently stuck on the legacy queue path.
This wires the value through the existing config-sync surface:
* `applyDisplay` now reads `display.busy_input_mode`, defaults to
`interrupt` (matching `_load_busy_input_mode` in tui_gateway), and
drops it into a new `UiState.busyInputMode` field.
* `dispatchSubmission` and the queue-edit fall-through call a shared
`handleBusyInput` helper that branches on the mode:
* `queue` — legacy behavior, append to the queue.
* `steer` — call `session.steer`; on rejection, fall back to
queue with a sys note.
* `interrupt` — `turnController.interruptTurn(...)` then `send()`,
so the new prompt actually moves.
* Mtime polling in `useConfigSync` already re-applies `config.full`, so
flipping `display.busy_input_mode` in `~/.hermes/config.yaml` takes
effect on the next 5s tick without restarting the TUI.
Tests:
* `applyDisplay → busy_input_mode` covers normalization + UiState fan-out.
* `normalizeBusyInputMode` mirrors the Python side's allow-list.
Validation:
* `npm run type-check` (in `ui-tui/`) — clean.
* `npm test --run` (in `ui-tui/`) — 394/394.
* review(copilot): narrow busy_input_mode type, preserve queue order on steer fallback
* review(copilot): clarify handleBusyInput comment (option, not return value)
* fix(tui): default busy_input_mode to queue in TUI (CLI keeps interrupt)
In a full-screen TUI users typically author the next prompt while the
agent is still streaming, so an unintended interrupt loses in-flight
typing. TUI fallback now defaults to `queue`; CLI / messaging
adapters keep `interrupt` as the framework default.
Override per-config via `display.busy_input_mode: interrupt` (or
`steer`) — the normalize/wire path is unchanged, only the missing-
value branch differs from the Python default.
uiStore initial value also flipped to `queue` so first-frame render
before `config.full` lands matches the eventual normalized value.
02356abc
pushed a commit
to 02356abc/hermes-agent
that referenced
this pull request
May 14, 2026
* fix(tui): honor display.busy_input_mode in TUI v2
The TUI v2 frontend hard-coded `composerActions.enqueue(full)` whenever
`ui.busy` was true. The classic CLI and gateway adapters honor the
`display.busy_input_mode` config key (`interrupt` | `queue` | `steer`),
but Ink ignored it — sending a message during a long-running turn always
landed in the queue regardless of config. The config default is already
`interrupt` (hermes_cli/config.py), so users who explicitly opted into
that experience were silently stuck on the legacy queue path.
This wires the value through the existing config-sync surface:
* `applyDisplay` now reads `display.busy_input_mode`, defaults to
`interrupt` (matching `_load_busy_input_mode` in tui_gateway), and
drops it into a new `UiState.busyInputMode` field.
* `dispatchSubmission` and the queue-edit fall-through call a shared
`handleBusyInput` helper that branches on the mode:
* `queue` — legacy behavior, append to the queue.
* `steer` — call `session.steer`; on rejection, fall back to
queue with a sys note.
* `interrupt` — `turnController.interruptTurn(...)` then `send()`,
so the new prompt actually moves.
* Mtime polling in `useConfigSync` already re-applies `config.full`, so
flipping `display.busy_input_mode` in `~/.hermes/config.yaml` takes
effect on the next 5s tick without restarting the TUI.
Tests:
* `applyDisplay → busy_input_mode` covers normalization + UiState fan-out.
* `normalizeBusyInputMode` mirrors the Python side's allow-list.
Validation:
* `npm run type-check` (in `ui-tui/`) — clean.
* `npm test --run` (in `ui-tui/`) — 394/394.
* review(copilot): narrow busy_input_mode type, preserve queue order on steer fallback
* review(copilot): clarify handleBusyInput comment (option, not return value)
* fix(tui): default busy_input_mode to queue in TUI (CLI keeps interrupt)
In a full-screen TUI users typically author the next prompt while the
agent is still streaming, so an unintended interrupt loses in-flight
typing. TUI fallback now defaults to `queue`; CLI / messaging
adapters keep `interrupt` as the framework default.
Override per-config via `display.busy_input_mode: interrupt` (or
`steer`) — the normalize/wire path is unchanged, only the missing-
value branch differs from the Python default.
uiStore initial value also flipped to `queue` so first-frame render
before `config.full` lands matches the eventual normalized value.
dannyJ848
pushed a commit
to dannyJ848/hermes-agent
that referenced
this pull request
May 17, 2026
* fix(tui): honor display.busy_input_mode in TUI v2
The TUI v2 frontend hard-coded `composerActions.enqueue(full)` whenever
`ui.busy` was true. The classic CLI and gateway adapters honor the
`display.busy_input_mode` config key (`interrupt` | `queue` | `steer`),
but Ink ignored it — sending a message during a long-running turn always
landed in the queue regardless of config. The config default is already
`interrupt` (hermes_cli/config.py), so users who explicitly opted into
that experience were silently stuck on the legacy queue path.
This wires the value through the existing config-sync surface:
* `applyDisplay` now reads `display.busy_input_mode`, defaults to
`interrupt` (matching `_load_busy_input_mode` in tui_gateway), and
drops it into a new `UiState.busyInputMode` field.
* `dispatchSubmission` and the queue-edit fall-through call a shared
`handleBusyInput` helper that branches on the mode:
* `queue` — legacy behavior, append to the queue.
* `steer` — call `session.steer`; on rejection, fall back to
queue with a sys note.
* `interrupt` — `turnController.interruptTurn(...)` then `send()`,
so the new prompt actually moves.
* Mtime polling in `useConfigSync` already re-applies `config.full`, so
flipping `display.busy_input_mode` in `~/.hermes/config.yaml` takes
effect on the next 5s tick without restarting the TUI.
Tests:
* `applyDisplay → busy_input_mode` covers normalization + UiState fan-out.
* `normalizeBusyInputMode` mirrors the Python side's allow-list.
Validation:
* `npm run type-check` (in `ui-tui/`) — clean.
* `npm test --run` (in `ui-tui/`) — 394/394.
* review(copilot): narrow busy_input_mode type, preserve queue order on steer fallback
* review(copilot): clarify handleBusyInput comment (option, not return value)
* fix(tui): default busy_input_mode to queue in TUI (CLI keeps interrupt)
In a full-screen TUI users typically author the next prompt while the
agent is still streaming, so an unintended interrupt loses in-flight
typing. TUI fallback now defaults to `queue`; CLI / messaging
adapters keep `interrupt` as the framework default.
Override per-config via `display.busy_input_mode: interrupt` (or
`steer`) — the normalize/wire path is unchanged, only the missing-
value branch differs from the Python default.
uiStore initial value also flipped to `queue` so first-frame render
before `config.full` lands matches the eventual normalized value.
gweeteve
pushed a commit
to gweeteve/hermes-agent
that referenced
this pull request
Jun 2, 2026
* fix(tui): honor display.busy_input_mode in TUI v2
The TUI v2 frontend hard-coded `composerActions.enqueue(full)` whenever
`ui.busy` was true. The classic CLI and gateway adapters honor the
`display.busy_input_mode` config key (`interrupt` | `queue` | `steer`),
but Ink ignored it — sending a message during a long-running turn always
landed in the queue regardless of config. The config default is already
`interrupt` (hermes_cli/config.py), so users who explicitly opted into
that experience were silently stuck on the legacy queue path.
This wires the value through the existing config-sync surface:
* `applyDisplay` now reads `display.busy_input_mode`, defaults to
`interrupt` (matching `_load_busy_input_mode` in tui_gateway), and
drops it into a new `UiState.busyInputMode` field.
* `dispatchSubmission` and the queue-edit fall-through call a shared
`handleBusyInput` helper that branches on the mode:
* `queue` — legacy behavior, append to the queue.
* `steer` — call `session.steer`; on rejection, fall back to
queue with a sys note.
* `interrupt` — `turnController.interruptTurn(...)` then `send()`,
so the new prompt actually moves.
* Mtime polling in `useConfigSync` already re-applies `config.full`, so
flipping `display.busy_input_mode` in `~/.hermes/config.yaml` takes
effect on the next 5s tick without restarting the TUI.
Tests:
* `applyDisplay → busy_input_mode` covers normalization + UiState fan-out.
* `normalizeBusyInputMode` mirrors the Python side's allow-list.
Validation:
* `npm run type-check` (in `ui-tui/`) — clean.
* `npm test --run` (in `ui-tui/`) — 394/394.
* review(copilot): narrow busy_input_mode type, preserve queue order on steer fallback
* review(copilot): clarify handleBusyInput comment (option, not return value)
* fix(tui): default busy_input_mode to queue in TUI (CLI keeps interrupt)
In a full-screen TUI users typically author the next prompt while the
agent is still streaming, so an unintended interrupt loses in-flight
typing. TUI fallback now defaults to `queue`; CLI / messaging
adapters keep `interrupt` as the framework default.
Override per-config via `display.busy_input_mode: interrupt` (or
`steer`) — the normalize/wire path is unchanged, only the missing-
value branch differs from the Python default.
uiStore initial value also flipped to `queue` so first-frame render
before `config.full` lands matches the eventual normalized value.
Egavasyug
pushed a commit
to Egavasyug/hermes-agent
that referenced
this pull request
Jun 10, 2026
* fix(tui): honor display.busy_input_mode in TUI v2
The TUI v2 frontend hard-coded `composerActions.enqueue(full)` whenever
`ui.busy` was true. The classic CLI and gateway adapters honor the
`display.busy_input_mode` config key (`interrupt` | `queue` | `steer`),
but Ink ignored it — sending a message during a long-running turn always
landed in the queue regardless of config. The config default is already
`interrupt` (hermes_cli/config.py), so users who explicitly opted into
that experience were silently stuck on the legacy queue path.
This wires the value through the existing config-sync surface:
* `applyDisplay` now reads `display.busy_input_mode`, defaults to
`interrupt` (matching `_load_busy_input_mode` in tui_gateway), and
drops it into a new `UiState.busyInputMode` field.
* `dispatchSubmission` and the queue-edit fall-through call a shared
`handleBusyInput` helper that branches on the mode:
* `queue` — legacy behavior, append to the queue.
* `steer` — call `session.steer`; on rejection, fall back to
queue with a sys note.
* `interrupt` — `turnController.interruptTurn(...)` then `send()`,
so the new prompt actually moves.
* Mtime polling in `useConfigSync` already re-applies `config.full`, so
flipping `display.busy_input_mode` in `~/.hermes/config.yaml` takes
effect on the next 5s tick without restarting the TUI.
Tests:
* `applyDisplay → busy_input_mode` covers normalization + UiState fan-out.
* `normalizeBusyInputMode` mirrors the Python side's allow-list.
Validation:
* `npm run type-check` (in `ui-tui/`) — clean.
* `npm test --run` (in `ui-tui/`) — 394/394.
* review(copilot): narrow busy_input_mode type, preserve queue order on steer fallback
* review(copilot): clarify handleBusyInput comment (option, not return value)
* fix(tui): default busy_input_mode to queue in TUI (CLI keeps interrupt)
In a full-screen TUI users typically author the next prompt while the
agent is still streaming, so an unintended interrupt loses in-flight
typing. TUI fallback now defaults to `queue`; CLI / messaging
adapters keep `interrupt` as the framework default.
Override per-config via `display.busy_input_mode: interrupt` (or
`steer`) — the normalize/wire path is unchanged, only the missing-
value branch differs from the Python default.
uiStore initial value also flipped to `queue` so first-frame render
before `config.full` lands matches the eventual normalized value.
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Summary
display.busy_input_mode(interrupt|queue|steer) is honored by classic CLI and gateway adapters but the TUI v2 frontend hard-coded queue-on-busy inuseSubmission.ts. Sending a message during a running turn always landed in the queue regardless of config.This wires the value through the existing config-sync surface so the TUI honors the user's setting, with one intentional split: the TUI default is
queue, while CLI / messaging adapters keepinterrupt(the existing framework default).Changes
applyDisplay()readsdisplay.busy_input_mode, falls back toqueue(TUI-only override), and stores it in a newUiState.busyInputModefield.dispatchSubmission(and the queue-edit fall-through) now route through a sharedhandleBusyInputhelper:queue— append toqueueRef(existing behavior).steer— callsession.steer; on rejection or RPC failure, fall back to queue with a sys note.interrupt—turnController.interruptTurn(...)thensend(...)so the new prompt actually moves.uiStoreinitial value matches:busyInputMode: 'queue'.useConfigSyncalready re-appliesconfig.full, so flipping the value in~/.hermes/config.yamlpropagates on the next ~5s tick — no TUI restart.Why the TUI default differs
In a full-screen TUI you typically author the next prompt while the agent is still streaming. An unintended
interruptloses in-flight typing and feels punitive. The CLI'sinterruptdefault makes sense in a terminal where you tend to wait for a response before typing again; the TUI's authoring loop is different. Users who want CLI-parity behavior setdisplay.busy_input_mode: interruptexplicitly.Test plan
npm run type-check(inui-tui/) — clean.npm test -- --run(inui-tui/) — 394/394 pass.normalizeBusyInputModemirrors the Python allow-list (queue/steer/interrupt); default isqueue.applyDisplay → busy_input_modecovers the UiState fan-out, invalid values, and missing-value fallback.Refs
busy_input_mode: interrupt configuration completely ignored by TUI v2.hermes_cli/config.py(busy_input_mode: "interrupt"framework default),tui_gateway/server.py::_load_busy_input_mode.