Details
The DDM4 V9 AR15 style rifle is designed to satisfy the needs of modern shooters, not only in popular shooting sports, but also for tactical and defensive applications. The long, 15 inch picatinny quad rail over a 16 inch Cold Hammer Forged barrel gives the operator the option to have the support hand extended out close to the muzzle allowing them to drive the gun more precisely, and preventing over travel when transitioning between multiple targets. This combined with our mid-length gas system, which is known to have a smoother recoil impulse, allows for quick but precise rapid fire. The longer rail also affords the shooter plenty of real estate for optics and accessories and allows for maximum sight radius for accurate shooting with rail mounted iron sights. The independently ambi GRIP-N-RIP Charging Handle accommodates left- and right-handed shooters. This rifle also comes with the ergonomic Daniel Defense Buttstock and Pistol Grip.
MATERIALS & CONSTRUCTION
- LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
- UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
- BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 Twist, 16" Government Profile, Chrome Lined, Mil-Spec Heavy Phosphate Coated, and HP/MPI Tested
- GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 Hardened Steel and Mil-Spec Heavy Phosphate Coating, Mid-length, Direct Impingement
- MUZZLE DEVICE: Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
- BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key
- BUFFER: H Buffer
- SIGHTS: Sold Separately
- HANDGUARD: Daniel Defense DDM4 Rail 15.0, CNC Machined of 6061-T6 Aluminum, Type III Hard Coat Anodized
- CHARGING HANDLE: GRIP-N-RIP Charging Handle, Body CNC Machined of 7075-T6 Aluminum, Handles & Latch CNC Machined of 6061-T6 Aluminum, Heavy Duty Stainless Steel Roll Pins, Type III Hard Coat Anodized
- RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum
- BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
- PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
- GRIP: Daniel Defense Vertical Grip, Glass Filled Polymer with Soft Touch Overmolding
- RAIL PANELS: Daniel Defense Rail Panels made from Santoprene, heat resistant to 300° F.
- Made in the USA!
Specifications
| Mounting System | Picatinny |
|---|---|
| Caliber | 5.56mm NATO |
| Muzzle Thread | 1 ⁄ 2 × 28 TPI (Threads Per Inch) |
| Gas System | Mid-length |
| Barrel Length | 16" |
| Barrel Profile | Government |
| Product Weight | 6.59 lbs |
| Length | 32 1/4" – 35 7/8” (w/ muzzle device) |
| Magazine | DD Magazine |
| Case | Daniel Defense Full-Latch Impact Plastic Case |
| Manufacturer | Daniel Defense |
Frequently Asked Questions
What is the difference between the DDM4 V7 and DDM4 V9?
The easiest way to separate these two rifles is by rail style.The DDM4 V7 is the M-LOK option for shooters who want lighter weight and modern accessory attachment.The DDM4 V9 is the quad-rail option for shooters who prefer a classic full-rail setup.Both sit in the same broader Daniel Defense family, but the handguard feel and accessory strategy are different.
Is there a DD4 equivalent to the DDM4 V9?
There is not a perfect one-to-one match in name alone. The better comparison is to choose by feature set: if you want the DD4 family, look for the premium ambidextrous lower and updated rail system first, then compare barrel length and intended role against the DDM4 V9.
Which Daniel Defense suppressor works with a DDM4 V9?
Suppressor fit for DDM4 V9 depends on caliber rating, thread pitch, and mount compatibility.
The V9 will work great with both Soundguard 556 and Soundguard 6TI.
How does the California compliant maglock work on a DDM4 V9?
Daniel Defense's California-compliant configuration uses a mag-lock style setup. Because operation can differ from a standard rifle, buyers should follow the included instructions and confirm handling details with Daniel Defense or a qualified dealer before making modifications.
Can I swap the handguard on a DDM4 V9 for something shorter and lighter?
Rail swaps are fitment questions, not just style questions. Confirm length, mounting hardware, barrel-nut compatibility, and clearance before ordering a new handguard.
Does the DDM4 V9 have a threaded barrel?
Daniel Defense commonly uses standard muzzle thread patterns that make suppressor and muzzle device selection straightforward when you know the caliber.5.56 rifles commonly use 1/2x28 threads..300 Blackout and many 7.62-pattern setups commonly use 5/8x24 threads.Always verify the exact thread pitch on the product page or with Daniel Defense before ordering mounts or adapters.
Can I remove California compliant parts if I move to a free state?
Only make compliance-part changes after confirming the laws in your current state. If you are changing a California-compliant configuration, a qualified gunsmith and your local FFL are the right checkpoints before you publish or act on that guidance.
Do Daniel Defense California compliant rifles use a fixed-magazine system?
Daniel Defense's California-compliant configuration uses a mag-lock style setup. Because operation can differ from a standard rifle, buyers should follow the included instructions and confirm handling details with Daniel Defense or a qualified dealer before making modifications.
Do I need to open a California compliant rifle to seat a magazine?
Daniel Defense's California-compliant configuration uses a mag-lock style setup. Because operation can differ from a standard rifle, buyers should follow the included instructions and confirm handling details with Daniel Defense or a qualified dealer before making modifications.
Which Daniel Defense rifles are California compliant?
Daniel Defense currently offers California-compliant AR-15 options that include an AR Mag Lock and a 10-round magazine.
State restrictions can change, so the product page and the receiving FFL should be treated as the final compliance check before ordering.
Can Daniel Defense ship California compliant rifles to a California FFL?
State-compliance questions should always be handled conservatively because firearms laws and shipping policies change. Use the live product page, Daniel Defense FAQ, and the receiving FFL as the final authority before purchase.
Guaranteed Satisfaction
All Daniel Defense products carry a 100% satisfaction guarantee against defects in original materials and workmanship. If your Daniel Defense product shows evidence of such defects, Daniel Defense will make every accommodation to fix, repair, or replace your product in the most expeditious manner possible. Daniel Defense does not warranty products or damage caused to our products by the correct or incorrect installation of other manufacturer's products.
- Epic RifleDD knows how to build a solid rifle, it's such a tack driver, have not had one failure, absolutely one of the best out of the box rifles out there, I highly recommend them, you wont be disappointed!
Posted on
- A great reliable and very accurate rifleThe DDMV9LW in Tornado cerakote was my first DD rifle. I currently own five DDs ( алсо an M4A1, a V7SLW, a V7 in MIL SPEC+ cerakote, and a V7Pro). No malfunction in four years. Not even once. All are very accurate. The only problem is they cost almost twice as much in Ukraine where I currently am).
Posted on
- DDM4V9Outstanding! Yes, you get what you pay for. After 2 weeks I ordered another DD model.
Truly fantastic product. Enjoy!Posted on
- Great jobOwned this rifle for 6 years I believe still shoots like a dream. Dd5 is next
Posted on
- I Aim Only The BestMost awesome ar I’ve ever sported !!!
Posted on
- Number 1Love this rifle!!!!! I can honestly say this is the best of my AR'S !!!!
Posted on
- Quality 10/10I have owned many “high quality” ar15, however after picking this up and using it a couple of times, I’ve come to realize that none of my other rifles have the fit and finish that this DDM4V9 has. Fantastic job and looking forward to using more products from you guys!
Posted on
- Yes!Can't say enough good things about this rifle. It checks all the boxes. I'm running it with an eotech 512 and a few other accessories that are just personal preferences (Fortis RED break, ambidextrous charging handle, and magpul MBUS pro backups)...there's not a better rifle out there in my opinion. Well done, DD!
Posted on
- V9 reviewMy v9 is one of six dds I own, great rifle, smooth shooting . It has never failed to fire,only up grade was the trigger geissele ssd-e , fitted with my acog, my second favorite dd.
Posted on
- A SUPERB Rifle!!!I picked this rifle because the barrel is completely protected and covered by the picatinny rail giving plenty of space for your support hand with mounted accessories. This is a superb rifle! I own 3 DD firearms. If you're on the fence, the quality and SICK look of the V9 will not disappoint!
Posted on