About Danfoss Icon2™
The Danfoss Icon2(TM) App is used in combination with the Danfoss Icon2(TM) Floor heating control system for easy and convenient commissioning and configuration. Use the App for easy-to-follow step by step instructions...
The Danfoss Icon2(TM) App is used in combination with the Danfoss Icon2(TM) Floor heating control system for easy and convenient commissioning and configuration. Use the App for easy-to-follow step by step instructions and to select between the applications in the comprehensive catalogue floor heating / cooling applications. The Danfoss Icon2(TM) App is required when using other than default settings on the Danfoss Icon2(TM) Main Controller or if an advanced application is required.
Version History General improvements 1.3.12 May 26 • Support for iOS 26 • Changes to include more data in the commissioning report • Changes to the System overview page • Changes to how Secondary MCs are added to existing installations • Changes to Room overview page, when one room thermostat is connected to more than one outputs • Changes to include an updated blinking pattern sheet • Bugfix to avoid outputs with missing thermostat • Bugfix to avoid room thermostats showing cooling mode in Icon2 App • Bugfix to resume room thermostat pairing after lost Bluetooth connection with MC 1.3.11 Mar 2 • An animation is added to the app during the cleanup of memory, before firmware update • The Main Controller will now be set to “Install mode” during firmware update, to ensure the process goes as smoothly as possible • Secondary MCs, who are now shown also as Repeaters will have a label in front of their name, to make it clear to the user that it is a secondary mc. • Various bugfixes 1.3.8 09/17/2025 - Bugfixes - Latest available public Main controller firmware will be included in the app. - New visual presentation of blinking patterns - Updated technical drawings for the applications - If user has problem adoption secondary MCs, app will suggest “common issues” - When network test results where not all green, app will after 2nd test suggest adding a Repeater. - On the room overview page, Secondary MCs are shown also under the Repeater section, as they are in fact acting also as repeaters. 1.3.7 08/14/2025 - Latest available public Main controller firmware will be included in the app. - New visual presentation of blinking patterns - Updated technical drawings for the applications - If user has problem adoption secondary MCs, app will suggest “common issues” - When network test results where not all green, app will after 2nd test suggest adding a Repeater. - On the room overview page, Secondary MCs are shown also under the Repeater section, as they are in fact acting also as repeaters. 1.3.6 08/07/2025 - Included animations to the firmware update flow; - Transfer of update file - Installation of the new firmware - Controller is restarting - Activate Bluetooth if controller did not do it - During Multi MC firmware update, recommend to factory reset controller after the update - When user opens Icon2 App, it will check automatically if there is a new app version available and if so recommend updating. - Various bug fixes 1.3.5 07/09/2025 - Improvements to the network test - Explanation of the Main Controllers Blinking Patterns is now available from the main app page under the (i) button - Included a warning of the importance for specific firmware updates - Included reminder not to restart the main controller during firmware updates - Included new animations to better explain user actions and behaviour of the main controller - Bugfix to avoid situations where a room thermostat is not connected to an output/room - Bugfixes in general 1.3.4 06/23/2025 - Change to the format of the installation report which is stored locally on the Main Controller. - Bug fix to the network test related to when the installation uses multiple ZigBee repeaters. - Various other smaller improvements 1.3.3 04/23/2025 - Improvement to flow of adding RTs, where the Bluetooth connection could be lost if you move too far away from the main controller, then as soon as the device is back within range it will reconnect - Improvement to commissioning of a new building, with clearer description of the difference between Single vs Multi MC setups - Fix to the network test - Fix to wiring diagrams, where for some application the descriptions were missing - Various bug fixes and workflow improvements 1.3.1 01/22/2025 Multi controller system support Installation steps optimisation Network test improvements 1.3.0 11/06/2024 - Added Spanish language support 1.2.1 07/24/2024 - QR code scanner optimization - Support for 3rd party repeaters - Join repeaters and RTs without QR code - Possibility to abort when assigning devices - Demo mode bugfix - heating / cooling setting - Xcode 15 update - Support for adding comments and photos to handover report - Fixed an issue with scaling of launch screen 1.2.0 06/02/2024 - Minor UI related updates - Stability improvements - Improved QR scanner - Possibility to rename Repeaters 1.1.10 02/29/2024 Serial number and HP optimizer status added to handover report. Updated handling of Danfoss Identity Profile logon Temperature setpoint refresh for room overview Minor updates to graphical layout Minor bugfixes and improvements Update for demo mode 1.1.9 01/31/2024 Bug fixes 1.1.8 11/21/2023 Updated Privacy Policy URL Added new image for Wired RT in Configure Room screen Fixed app does not reconnect to MC after OTA, pairing alert is shown constantly now 1.1.7 11/09/2023 - Fixed uninstall repeater functionality if there is more then one repeater 1.1.6 09/22/2023 - Implement Czech language - Privacy Policy in polish fixed - Added Uninstall Repeater functionality 1.1.5 09/01/2023 Fixes a bug in some translations and links to Privacy Policy. Adds updated functionality in Demo mode. 1.1.4 07/12/2023 Fixes an issue with wrong conversion factor of Zigbee signal in the network test. 1.1.3 07/05/2023 Bug fixes and performance improvements 1.1.2 06/30/2023 Application 7, 10, 17 and 20 actuators used for changeover are not shown as available for rooms 1.1.1 06/02/2023 1.0 05/24/2023
Previous Versions
Here you can find the changelog of Danfoss Icon2™ since it was posted on our website on 2024-02-12 19:14:54.
The latest version is 1.3.12 and it was updated on 2026-06-24 11:19:25. See below the changes in each version.
Danfoss Icon2™ version 1.3.12
Updated At: 2026-06-03
Changes: Version History General improvements 1.3.12 May 26 • Support for iOS 26
• Changes to include more data in the commissioning report
• Changes to the System overview page
• Changes to how Secondary MCs are added to existing installations
• Changes to Room overview page, when one room thermostat is connected to more than one outputs
• Changes to include an updated blinking pattern sheet
• Bugfix to avoid outputs with missing thermostat
• Bugfix to avoid room thermostats showing cooling mode in Icon2 App
• Bugfix to resume room thermostat pairing after lost Bluetooth connection with MC 1.3.11 Mar 2 • An animation is added to the app during the cleanup of memory, before firmware update
• The Main Controller will now be set to “Install mode” during firmware update, to ensure the process goes as smoothly as possible
• Secondary MCs, who are now shown also as Repeaters will have a label in front of their name, to make it clear to the user that it is a secondary mc.
• Various bugfixes 1.3.8 09/17/2025 - Bugfixes
- Latest available public Main controller firmware will be included in the app.
- New visual presentation of blinking patterns
- Updated technical drawings for the applications
- If user has problem adoption secondary MCs, app will suggest “common issues”
- When network test results where not all green, app will after 2nd test suggest adding a Repeater.
- On the room overview page, Secondary MCs are shown also under the Repeater section, as they are in fact acting also as repeaters. 1.3.7 08/14/2025 - Latest available public Main controller firmware will be included in the app.
- New visual presentation of blinking patterns
- Updated technical drawings for the applications
- If user has problem adoption secondary MCs, app will suggest “common issues”
- When network test results where not all green, app will after 2nd test suggest adding a Repeater.
- On the room overview page, Secondary MCs are shown also under the Repeater section, as they are in fact acting also as repeaters. 1.3.6 08/07/2025 - Included animations to the firmware update flow;
- Transfer of update file
- Installation of the new firmware
- Controller is restarting
- Activate Bluetooth if controller did not do it
- During Multi MC firmware update, recommend to factory reset controller after the update
- When user opens Icon2 App, it will check automatically if there is a new app version available and if so recommend updating.
- Various bug fixes 1.3.5 07/09/2025 - Improvements to the network test
- Explanation of the Main Controllers Blinking Patterns is now available from the main app page under the (i) button
- Included a warning of the importance for specific firmware updates
- Included reminder not to restart the main controller during firmware updates
- Included new animations to better explain user actions and behaviour of the main controller
- Bugfix to avoid situations where a room thermostat is not connected to an output/room
- Bugfixes in general 1.3.4 06/23/2025 - Change to the format of the installation report which is stored locally on the Main Controller.
- Bug fix to the network test related to when the installation uses multiple ZigBee repeaters.
- Various other smaller improvements 1.3.3 04/23/2025 - Improvement to flow of adding RTs, where the Bluetooth connection could be lost if you move too far away from the main controller, then as soon as the device is back within range it will reconnect
- Improvement to commissioning of a new building, with clearer description of the difference between Single vs Multi MC setups
- Fix to the network test
- Fix to wiring diagrams, where for some application the descriptions were missing
- Various bug fixes and workflow improvements 1.3.1 01/22/2025 Multi controller system support
Installation steps optimisation
Network test improvements 1.3.0 11/06/2024 - Added Spanish language support 1.2.1 07/24/2024 - QR code scanner optimization
- Support for 3rd party repeaters
- Join repeaters and RTs without QR code
- Possibility to abort when assigning devices
- Demo mode bugfix - heating / cooling setting
- Xcode 15 update
- Support for adding comments and photos to handover report
- Fixed an issue with scaling of launch screen 1.2.0 06/02/2024 - Minor UI related updates
- Stability improvements
- Improved QR scanner
- Possibility to rename Repeaters 1.1.10 02/29/2024 Serial number and HP optimizer status added to handover report.
Updated handling of Danfoss Identity Profile logon
Temperature setpoint refresh for room overview
Minor updates to graphical layout
Minor bugfixes and improvements
Update for demo mode 1.1.9 01/31/2024 Bug fixes 1.1.8 11/21/2023 Updated Privacy Policy URL
Added new image for Wired RT in Configure Room screen
Fixed app does not reconnect to MC after OTA, pairing alert is shown constantly now 1.1.7 11/09/2023 - Fixed uninstall repeater functionality if there is more then one repeater 1.1.6 09/22/2023 - Implement Czech language
- Privacy Policy in polish fixed
- Added Uninstall Repeater functionality 1.1.5 09/01/2023 Fixes a bug in some translations and links to Privacy Policy.
Adds updated functionality in Demo mode. 1.1.4 07/12/2023 Fixes an issue with wrong conversion factor of Zigbee signal in the network test. 1.1.3 07/05/2023 Bug fixes and performance improvements 1.1.2 06/30/2023 Application 7, 10, 17 and 20 actuators used for changeover are not shown as available for rooms 1.1.1 06/02/2023 1.0 05/24/2023
Danfoss Icon2™ version 1.3.11
Updated At: 2026-03-02
Changes: • Support for iOS 26
• Changes to include more data in the commissioning report
• Changes to the System overview page
• Changes to how Secondary MCs are added to existing installations
• Changes to Room overview page, when one room thermostat is connected to more than one outputs
• Changes to include an updated blinking pattern sheet
• Bugfix to avoid outputs with missing thermostat
• Bugfix to avoid room thermostats showing cooling mode in Icon2 App
• Bugfix to resume room thermostat pairing after lost Bluetooth connection with MC
Danfoss Icon2™ version 1.3.8
Updated At: 2025-09-17
Changes: Sep 17, 2025
Version 1.3.8
• An animation is added to the app during the cleanup of memory, before firmware update
• The Main Controller will now be set to “Install mode” during firmware update, to ensure the process goes as smoothly as possible
• Secondary MCs, who are now shown also as Repeaters will have a label in front of their name, to make it clear to the user that it is a secondary mc.
• Various bugfixes
Danfoss Icon2™ version 1.3.8
Updated At: 2025-09-17
Changes: • An animation is added to the app during the cleanup of memory, before firmware update
• The Main Controller will now be set to “Install mode” during firmware update, to ensure the process goes as smoothly as possible
• Secondary MCs, who are now shown also as Repeaters will have a label in front of their name, to make it clear to the user that it is a secondary mc.
• Various bugfixes
Danfoss Icon2™ version 1.3.7
Updated At: 2025-08-14
Changes: Aug 14, 2025
Version 1.3.7
- Bugfixes
- Latest available public Main controller firmware will be included in the app.
- New visual presentation of blinking patterns
- Updated technical drawings for the applications
- If user has problem adoption secondary MCs, app will suggest “common issues”
- When network test results where not all green, app will after 2nd test suggest adding a Repeater.
- On the room overview page, Secondary MCs are shown also under the Repeater section, as they are in fact acting also as repeaters.
Danfoss Icon2™ version 1.3.3
Updated At: 2025-04-23
Changes: Apr 23, 2025
Version 1.3.3
- Change to the format of the installation report which is stored locally on the Main Controller.
- Bug fix to the network test related to when the installation uses multiple ZigBee repeaters.
- Various other smaller improvements
Danfoss Icon2™ version 1.3.1
Updated At: 2025-01-22
Changes: Jan 22, 2025
Version 1.3.1
- Improvement to flow of adding RTs, where the Bluetooth connection could be lost if you move too far away from the main controller, then as soon as the device is back within range it will reconnect
- Improvement to commissioning of a new building, with clearer description of the difference between Single vs Multi MC setups
- Fix to the network test
- Fix to wiring diagrams, where for some application the descriptions were missing
- Various bug fixes and workflow improvements
Danfoss Icon2™ version 1.3.0
Updated At: 2024-11-06
Changes: Nov 6, 2024
Version 1.3.0
Multi controller system support
Installation steps optimisation
Network test improvements
Danfoss Icon2™ version 1.2.1
Updated At: 2024-07-24
Changes: Jul 24, 2024
Version 1.2.1
- Added Spanish language support
Danfoss Icon2™ version 1.2.0
Updated At: 2024-06-02
Changes: Jun 2, 2024
Version 1.2.0
- QR code scanner optimization
- Support for 3rd party repeaters
- Join repeaters and RTs without QR code
- Possibility to abort when assigning devices
- Demo mode bugfix - heating / cooling setting
- Xcode 15 update
- Support for adding comments and photos to handover report
- Fixed an issue with scaling of launch screen
Disclaimer
Official App Store Link
We do not host Danfoss Icon2™ on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for Danfoss Icon2™ is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
