About ControlSpace Remote Client
PLEASE NOTE: This application ONLY works with Bose Professional Networked Systems. Designed for end-user control of audio systems using Bose(R) Professional networked products, the ControlSpace(R) Remote app provides...
PLEASE NOTE: This application ONLY works with Bose Professional Networked Systems. Designed for end-user control of audio systems using Bose(R) Professional networked products, the ControlSpace(R) Remote app provides intuitive and personalized wireless control for increased convenience and utilization of installed sound systems. The app provides the ability for custom controls, backgrounds, and images and support for the following system functions: . Volume/mute, Source selection, tone control . Parameter set control . VoIP and PSTN dialers . Conference Room Router control For advanced users, such as facility managers, collections of control panels can be displayed as logical groupings which mimic specific zone arrangements in a facility. ControlSpace Remote app must be configured by a certified Bose Professional system installer using ControlSpace Remote Builder, a PC software application (available on pro.Bose.com) where installers design, test and deploy control panels to mobile devices.
Version History New Features 3.1 1. Added controls for PowerShareX PSX1204D / PSX2404D / PSX4804D a. Output Level / Mute b. Grouped Output Level / Mute c. ParameterSet and ParameterSet List support Note: An ESP or EX processor or PC hosting the PowerShareX Proxy is required for ControlSpace Remote to control PSX devices. For more information on the PSXProxy please refer to the ControlSpace Designer Help file in CSD 5.15 or later. 2. Health & Status Monitoring for MSA12X and PowerShareX a. Device Status I. Displays number of MSA12X and PowerShareX devices connected and if any faults are present. b. Device Details I. Displays device specific information including: network info, standby status, auto-standby status, backup strategy, active source, output signal presence, clipping, limiting, temperature, warning, and fault info. Fixes 1. Connection indicator now changes colors depending on connection status: a. Red: CSR cannot connect to any devices in its configuration. b. Yellow: CSR is not connected to one or more devices in its configuration, or a device in its configuration does not have any controls in CSR. c. Green: All devices in CSR's configuration are connected and communicating. 2. Fixed alignment of elements in "About ControlSpace Remote" window that were cut off on some screen resolutions. 3. Improved loading speed of designs with a large number of meters. 4. Fixed issue where the app can progressively slow down and become unresponsive when using multiple panels of meters in some designs with an EX-1280. 3.1.18 07/22/2025 - Enlarged Bose Pro logo on about page - App Store compliance requirement - Privacy Manifest added to the app. 3.0.10 09/10/2024 - Icon and branding changes for Bose Professional products - Minimum supported version is iOS 13.0 - Fixed bug in CSR Client where a blank canvas was displayed after updating. 3.0.8 03/19/2024 New Features 1. Migrated code language from Qt 5 to Qt 6. Due to discontinued support for some features in Qt 5, updating to Qt 6 was required. Fixes 1. PSX amplifiers can be in a .CSP project file and not cause issues for other CSR functionality 2. Many past connectivity issues are fixed from the codebase move to Qt 6 3. Compatibility Issues for more recent OSes are fixed from the codebase move to Qt 6 4. Fixed issue where borders on faders are too thick 5. Fixed issue where region shapes on sub-panels are visible on the home panel after device initially "Receives" it, 3.0.6 12/14/2023 - Improved performance when more than 12 meters exist in a design. 2.10.1 01/19/2022 - Updates for compatibility with latest iOS versions 11.0 through 14.6. - PowerShare now correctly reports input values of -60 to 0. - Meter icon title is now visible when background is dark. - Fixed issue where PowerMatch output label causes CSR metering to crash or display wrong value. - Controls now scaled correctly after rotating CSR client - Fixed issue where CSR meters disappear. - CSR Builder opens design file with incorrect aspect ratio Known issue: - CSR performance may decrease when more than 12 meters exist in a design. 2.10 10/19/2021 This release of ControlSpace Remote software adds support for the following new features: •Input and output metering now available in CSR This release of ControlSpace Remote fixes various issues including: •Fixed an issue where group and logic control were not working properly in CSR. •Name changes made to AmpLink channels were not being reflected properly. •Name changes made to AMM Mics are not reflected in CSR. Known Issues, Defects and Limitations The following are the known issues and defects with this release. Information included here can be useful when troubleshooting issues with software or hardware operation. •It is not possible to end a VoIP call with CSR when the Far End is in a “Hold” state. 2.9 03/26/2020 This release of ControlSpace Remote software adds support for the following new features: •ToneEQ control can now be moved and resized This release of ControlSpace Remote fixes various issues including: •Gain min/max values were not being saved and applied properly in CSRBuilder 2.6. •Group Selectors were unable to be controlled on mobile device but were working in CSRBuilder •PowerShare did not update Remote app IP Address on in CSRBuilder. •Users were able to enter CRR gain values outside the set gain limits 2.8 10/29/2019 This release of ControlSpace Remote software adds support for the following new features: •Volume up / down buttons that can be used instead of a fader for volume control •Support for URL schemes so that other apps can launch CSR directly This release of ControlSpace Remote fixes various issues including: •Android CSR clients were losing connection after a few hours and not automatically reconnecting •Changing the names of the AmpLink channels within CSD did not update the level slider labels within CSR •Changing the names of the AMM Mics within CSD did not update the mute buttons within CSR •When a PS-xxxD design is created in CSD, the PS-xxxD did not show up in CSR •User was unable to add a room to a Room Combine via CSR •Min/Max settings for Volume Sliders were not be applied in CSR •Adding two of either Setup Button or Connection Indicator was causing CSR Builder to crash •Toggle for pre-defined logic blocks was not working in CSR •Upgrading a client from 2.5 to 2.6 without updating the design file was occasionally causing group and logic control to stop working 2.7 08/08/2019 This release of ControlSpace Remote software adds the support for the following new features: •Support for EX-12AEC/440C/1280 •Support for CSP-428/1248 •Performance enhancements Defects Fixed in this release •Slider fill level displayed incorrectly •AmpLink unavailable for EX-1280C •Grouped PowerMatch outputs not always displayed correctly •VoIP and PSTN module names cut off in Properties tab •Image does not support full opacity range •Grouped selectors not functional 2.6 06/12/2019 This release of ControlSpace Remote software adds the support for the following new features: •Support for ESP-880A/880AD/1240A/1240AD •Support for PS404D/PS604D amplifiers •Updated Device list Defects Fixed in this release •PSet dropdown list were not recalling PSet •Grouped amplifier outputs (PM and PS) defaulted to max 12 dB instead of 0dB •Could not send to mobile device when Tone EQ is only control on panel •Panel was incorrectly centered when "Center Controls Horizontally" is checked •Blank site name was displaying in client as "SITE NAME" •Deleting panel from layout menu caused scroll bar to default to top •"Blank Panel" template displayed leading "-" •Minimum toolbar was not showing settings icon •Canvas size did not correctly match device size 2.5 02/07/2019 This release of ControlSpace Remote software adds the support for the following new features: •Added EX-1280C USB I/O support Defects Fixed in this release •Fixed Standard Room Combiner display label •Fixed Standard Room Combiner name in project tree 2.4 12/06/2018 This release of ControlSpace Remote software adds the support for the following new features: Support for ESP-880A/880AD/1240A/1240AD Updated Help Files Defects Fixed in this release: Fixed issue where frames were being layered above panel links which prevented the links from working. 2.3.1 10/16/2018 This release of ControlSpace Remote software adds the support for the following new features: Room Combine Group panels Parameter Set Lists This release also contains the following defect fixes: CSR can now reload a .csp file updated in CSD without affecting the project. Things like additions, deletions, and renaming are handled as you would expect. Controls update automatically for things like name changes. Minimum size for controls (15 height and width). Prevents users from accidently sizing controls so small they can’t be found and selected. Close the .csp file when the user chooses “New Remote App File”. Fixed issues with the capability to move some controls in front of or in back of others. 2.3.0 10/02/2018 What’s new: •VoIP and PSTN Dialers •Conference Room Router controls •Logic control Fixed in this •Randomly changing controls •Cyrillic font on iOS •ControlSpace Remote Builder not showing canvas •Order issue frames / selectors 2.2.0 01/24/2018 Bug fixes 2.1.0 05/25/2017 2.0.3 02/03/2016
Previous Versions
Here you can find the changelog of ControlSpace Remote Client since it was posted on our website on 2016-11-08 14:59:49.
The latest version is 3.1.18 and it was updated on 2026-06-25 01:46:49. See below the changes in each version.
ControlSpace Remote Client version 3.1.18
Updated At: 2026-06-03
Changes: Version History New Features 3.1
1. Added controls for PowerShareX PSX1204D / PSX2404D / PSX4804D
a. Output Level / Mute
b. Grouped Output Level / Mute
c. ParameterSet and ParameterSet List support
Note: An ESP or EX processor or PC hosting the PowerShareX Proxy is required for ControlSpace Remote to control PSX devices. For more information on the PSXProxy please refer to the ControlSpace Designer Help file in CSD 5.15 or later.
2. Health & Status Monitoring for MSA12X and PowerShareX
a. Device Status
I. Displays number of MSA12X and PowerShareX devices connected and if any faults are present.
b. Device Details
I. Displays device specific information including: network info, standby status, auto-standby status, backup strategy, active source, output signal presence, clipping, limiting, temperature, warning, and fault info.
Fixes
1. Connection indicator now changes colors depending on connection status:
a. Red: CSR cannot connect to any devices in its configuration.
b. Yellow: CSR is not connected to one or more devices in its configuration, or a device in its configuration does not have any controls in CSR.
c. Green: All devices in CSR's configuration are connected and communicating.
2. Fixed alignment of elements in "About ControlSpace Remote" window that were cut off on some screen resolutions.
3. Improved loading speed of designs with a large number of meters.
4. Fixed issue where the app can progressively slow down and become unresponsive when using multiple panels of meters in some designs with an EX-1280. 3.1.18 07/22/2025 - Enlarged Bose Pro logo on about page
- App Store compliance requirement - Privacy Manifest added to the app. 3.0.10 09/10/2024 - Icon and branding changes for Bose Professional products
- Minimum supported version is iOS 13.0
- Fixed bug in CSR Client where a blank canvas was displayed after updating. 3.0.8 03/19/2024 New Features
1. Migrated code language from Qt 5 to Qt 6. Due to discontinued support for some features in Qt 5, updating to Qt 6 was required.
Fixes
1. PSX amplifiers can be in a .CSP project file and not cause issues for other CSR functionality
2. Many past connectivity issues are fixed from the codebase move to Qt 6
3. Compatibility Issues for more recent OSes are fixed from the codebase move to Qt 6
4. Fixed issue where borders on faders are too thick
5. Fixed issue where region shapes on sub-panels are visible on the home panel after device initially "Receives" it, 3.0.6 12/14/2023 - Improved performance when more than 12 meters exist in a design. 2.10.1 01/19/2022 - Updates for compatibility with latest iOS versions 11.0 through 14.6.
- PowerShare now correctly reports input values of -60 to 0.
- Meter icon title is now visible when background is dark.
- Fixed issue where PowerMatch output label causes CSR metering to crash or display wrong value.
- Controls now scaled correctly after rotating CSR client
- Fixed issue where CSR meters disappear.
- CSR Builder opens design file with incorrect aspect ratio
Known issue:
- CSR performance may decrease when more than 12 meters exist in a design. 2.10 10/19/2021 This release of ControlSpace Remote software adds support for the following new features:
•Input and output metering now available in CSR
This release of ControlSpace Remote fixes various issues including:
•Fixed an issue where group and logic control were not working properly in CSR.
•Name changes made to AmpLink channels were not being reflected properly.
•Name changes made to AMM Mics are not reflected in CSR.
Known Issues, Defects and Limitations
The following are the known issues and defects with this release. Information included here can be useful when troubleshooting issues with software or hardware operation.
•It is not possible to end a VoIP call with CSR when the Far End is in a “Hold” state. 2.9 03/26/2020 This release of ControlSpace Remote software adds support for the following new features:
•ToneEQ control can now be moved and resized
This release of ControlSpace Remote fixes various issues including:
•Gain min/max values were not being saved and applied properly in CSRBuilder 2.6.
•Group Selectors were unable to be controlled on mobile device but were working in CSRBuilder
•PowerShare did not update Remote app IP Address on in CSRBuilder.
•Users were able to enter CRR gain values outside the set gain limits 2.8 10/29/2019 This release of ControlSpace Remote software adds support for the following new features:
•Volume up / down buttons that can be used instead of a fader for volume control
•Support for URL schemes so that other apps can launch CSR directly
This release of ControlSpace Remote fixes various issues including:
•Android CSR clients were losing connection after a few hours and not automatically reconnecting
•Changing the names of the AmpLink channels within CSD did not update the level slider labels within CSR
•Changing the names of the AMM Mics within CSD did not update the mute buttons within CSR
•When a PS-xxxD design is created in CSD, the PS-xxxD did not show up in CSR
•User was unable to add a room to a Room Combine via CSR
•Min/Max settings for Volume Sliders were not be applied in CSR
•Adding two of either Setup Button or Connection Indicator was causing CSR Builder to crash
•Toggle for pre-defined logic blocks was not working in CSR
•Upgrading a client from 2.5 to 2.6 without updating the design file was occasionally causing group and logic control to stop working 2.7 08/08/2019 This release of ControlSpace Remote software adds the support for the following new features:
•Support for EX-12AEC/440C/1280
•Support for CSP-428/1248
•Performance enhancements
Defects Fixed in this release
•Slider fill level displayed incorrectly
•AmpLink unavailable for EX-1280C
•Grouped PowerMatch outputs not always displayed correctly
•VoIP and PSTN module names cut off in Properties tab
•Image does not support full opacity range
•Grouped selectors not functional 2.6 06/12/2019 This release of ControlSpace Remote software adds the support for the following new features:
•Support for ESP-880A/880AD/1240A/1240AD
•Support for PS404D/PS604D amplifiers
•Updated Device list
Defects Fixed in this release
•PSet dropdown list were not recalling PSet
•Grouped amplifier outputs (PM and PS) defaulted to max 12 dB instead of 0dB
•Could not send to mobile device when Tone EQ is only control on panel
•Panel was incorrectly centered when "Center Controls Horizontally" is checked
•Blank site name was displaying in client as "SITE NAME"
•Deleting panel from layout menu caused scroll bar to default to top
•"Blank Panel" template displayed leading "-"
•Minimum toolbar was not showing settings icon
•Canvas size did not correctly match device size 2.5 02/07/2019 This release of ControlSpace Remote software adds the support for the following new features:
•Added EX-1280C USB I/O support
Defects Fixed in this release
•Fixed Standard Room Combiner display label
•Fixed Standard Room Combiner name in project tree 2.4 12/06/2018 This release of ControlSpace Remote software adds the support for the following new features:
Support for ESP-880A/880AD/1240A/1240AD
Updated Help Files
Defects Fixed in this release:
Fixed issue where frames were being layered above panel links which prevented the links from working. 2.3.1 10/16/2018 This release of ControlSpace Remote software adds the support for the following new features:
Room Combine Group panels
Parameter Set Lists
This release also contains the following defect fixes:
CSR can now reload a .csp file updated in CSD without affecting the project. Things like additions, deletions, and renaming are handled as you would expect. Controls update automatically for things like name changes.
Minimum size for controls (15 height and width). Prevents users from accidently sizing controls so small they can’t be found and selected.
Close the .csp file when the user chooses “New Remote App File”.
Fixed issues with the capability to move some controls in front of or in back of others. 2.3.0 10/02/2018 What’s new:
•VoIP and PSTN Dialers
•Conference Room Router controls
•Logic control
Fixed in this
•Randomly changing controls
•Cyrillic font on iOS
•ControlSpace Remote Builder not showing canvas
•Order issue frames / selectors 2.2.0 01/24/2018 Bug fixes 2.1.0 05/25/2017 2.0.3 02/03/2016
ControlSpace Remote Client version 3.1.18
Updated At: 2025-07-22
Changes: Jul 22, 2025
Version 3.1.18
New Features 3.1
1. Added controls for PowerShareX PSX1204D / PSX2404D / PSX4804D
a. Output Level / Mute
b. Grouped Output Level / Mute
c. ParameterSet and ParameterSet List support
Note: An ESP or EX processor or PC hosting the PowerShareX Proxy is required for ControlSpace Remote to control PSX devices. For more information on the PSXProxy please refer to the ControlSpace Designer Help file in CSD 5.15 or later.
2. Health & Status Monitoring for MSA12X and PowerShareX
a. Device Status
I. Displays number of MSA12X and PowerShareX devices connected and if any faults are present.
b. Device Details
I. Displays device specific information including: network info, standby status, auto-standby status, backup strategy, active source, output signal presence, clipping, limiting, temperature, warning, and fault info.
Fixes
1. Connection indicator now changes colors depending on connection status:
a. Red: CSR cannot connect to any devices in its configuration.
b. Yellow: CSR is not connected to one or more devices in its configuration, or a device in its configuration does not have any controls in CSR.
c. Green: All devices in CSR's configuration are connected and communicating.
2. Fixed alignment of elements in "About ControlSpace Remote" window that were cut off on some screen resolutions.
3. Improved loading speed of designs with a large number of meters.
4. Fixed issue where the app can progressively slow down and become unresponsive when using multiple panels of meters in some designs with an EX-1280.
ControlSpace Remote Client version 3.1.18
Updated At: 2025-07-22
Changes: New Features 3.1
1. Added controls for PowerShareX PSX1204D / PSX2404D / PSX4804D
a. Output Level / Mute
b. Grouped Output Level / Mute
c. ParameterSet and ParameterSet List support
Note: An ESP or EX processor or PC hosting the PowerShareX Proxy is required for ControlSpace Remote to control PSX devices. For more information on the PSXProxy please refer to the ControlSpace Designer Help file in CSD 5.15 or later.
2. Health & Status Monitoring for MSA12X and PowerShareX
a. Device Status
I. Displays number of MSA12X and PowerShareX devices connected and if any faults are present.
b. Device Details
I. Displays device specific information including: network info, standby status, auto-standby status, backup strategy, active source, output signal presence, clipping, limiting, temperature, warning, and fault info.
Fixes
1. Connection indicator now changes colors depending on connection status:
a. Red: CSR cannot connect to any devices in its configuration.
b. Yellow: CSR is not connected to one or more devices in its configuration, or a device in its configuration does not have any controls in CSR.
c. Green: All devices in CSR's configuration are connected and communicating.
2. Fixed alignment of elements in "About ControlSpace Remote" window that were cut off on some screen resolutions.
3. Improved loading speed of designs with a large number of meters.
4. Fixed issue where the app can progressively slow down and become unresponsive when using multiple panels of meters in some designs with an EX-1280.
ControlSpace Remote Client version 3.0.10
Updated At: 2024-09-10
Changes: Sep 10, 2024
Version 3.0.10
- Enlarged Bose Pro logo on about page
- App Store compliance requirement - Privacy Manifest added to the app.
ControlSpace Remote Client version 3.0.8
Updated At: 2024-03-19
Changes: Mar 19, 2024
Version 3.0.8
- Icon and branding changes for Bose Professional products
- Minimum supported version is iOS 13.0
- Fixed bug in CSR Client where a blank canvas was displayed after updating.
ControlSpace Remote Client version 3.0.6
Updated At: 2023-12-14
Changes: Dec 14, 2023
Version 3.0.6
New Features
1. Migrated code language from Qt 5 to Qt 6. Due to discontinued support for some features in Qt 5, updating to Qt 6 was required.
Fixes
1. PSX amplifiers can be in a .CSP project file and not cause issues for other CSR functionality
2. Many past connectivity issues are fixed from the codebase move to Qt 6
3. Compatibility Issues for more recent OSes are fixed from the codebase move to Qt 6
4. Fixed issue where borders on faders are too thick
5. Fixed issue where region shapes on sub-panels are visible on the home panel after device initially "Receives" it,
ControlSpace Remote Client version 2.10.1
Updated At: 2022-01-19
Changes: Jan 19, 2022 Version 2.10.1
- Improved performance when more than 12 meters exist in a design.
ControlSpace Remote Client version 2.10
Updated At: 2021-10-19
Changes: Oct 19, 2021 Version 2.10
- Updates for compatibility with latest iOS versions 11.0 through 14.6.
- PowerShare now correctly reports input values of -60 to 0.
- Meter icon title is now visible when background is dark.
- Fixed issue where PowerMatch output label causes CSR metering to crash or display wrong value.
- Controls now scaled correctly after rotating CSR client
- Fixed issue where CSR meters disappear.
- CSR Builder opens design file with incorrect aspect ratio
Known issue:
- CSR performance may decrease when more than 12 meters exist in a design.
ControlSpace Remote Client version 2.9
Updated At: 2020-03-26
Changes: 26 Mar 2020 Version 2.9
This release of ControlSpace Remote software adds support for the following new features:
•Input and output metering now available in CSR
This release of ControlSpace Remote fixes various issues including:
•Fixed an issue where group and logic control were not working properly in CSR.
•Name changes made to AmpLink channels were not being reflected properly.
•Name changes made to AMM Mics are not reflected in CSR.
Known Issues, Defects and Limitations
The following are the known issues and defects with this release. Information included here can be useful when troubleshooting issues with software or hardware operation.
•It is not possible to end a VoIP call with CSR when the Far End is in a “Hold” state.
ControlSpace Remote Client version 2.9
Updated At: 2020-03-26
Changes: Mar 26, 2020 Version 2.9
This release of ControlSpace Remote software adds support for the following new features:
•Input and output metering now available in CSR
This release of ControlSpace Remote fixes various issues including:
•Fixed an issue where group and logic control were not working properly in CSR.
•Name changes made to AmpLink channels were not being reflected properly.
•Name changes made to AMM Mics are not reflected in CSR.
Known Issues, Defects and Limitations
The following are the known issues and defects with this release. Information included here can be useful when troubleshooting issues with software or hardware operation.
•It is not possible to end a VoIP call with CSR when the Far End is in a “Hold” state.
Disclaimer
Official App Store Link
We do not host ControlSpace Remote Client on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for ControlSpace Remote Client is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
