About BlueZoo
The BlueZoo Foot Traffic Analytics (FTA) mobile application is part of the BlueZoo family of hardware and software products designed to measure the presence and movement of people. BlueZoo solutions measure foot traffic,...
The BlueZoo Foot Traffic Analytics (FTA) mobile application is part of the BlueZoo family of hardware and software products designed to measure the presence and movement of people. BlueZoo solutions measure foot traffic, including numbers of visitors, visits, dwell time, unique visitors, the movement of visitors among sensors, and other advanced metrics. The primary management and analytics platform for the family is a web dashboard available here: dashboard.bluezoo.io/login. BlueZoo FTA is used to on-board new BlueZoo Wi-Fi sensors and to reconfigure sensors already deployed. The app is also used to collect “ground truth” to allow for the precise calibration of the sensor in its environment. Configuration of sensors includes the following: . Naming the sensor location . Assigning the sensor to a geographical space . Configuring Wi-Fi backhaul for cloud communication . Calibrating the sensor to detect persons only in the target detection zone Accurate calibration uses “ground truth” collected by the person performing the configuration. That person or persons record of the number of people present in the detection zone at a moment in time (“headcount snapshots”), or the number of people moving across thresholds into and out of the target detection zone over a period of time (“threshold counts”). To use this mobile application, you need credentials (username and password) and an appropriate role (installer or ground truth collector). This app uses the same credentials as those required for the BlueZoo web dashboard. Visit bluezoo.io for more information. See BlueZoo’s privacy policy at bluezoo.io/privacy.
Version History General -Status bar safe area fix 3.4.139 12/31/2025 Range detection •Standard computation method set as Karpov •Allows the suggested calibration to optionally be edited before being applied Distance calibration •Additional antenna types added (10dB & 14dB panel antennas) Audit •Allows the auditor to manually recheck for sensor visitor counts 3.4.138 12/10/2025 Sensor Hardware Properties •Added Wi-Fi password visibility toggle Ground Truth - Threshold Count Audit • Start countdown timer shows the correct number of seconds remaining during the last minute of wait time before the audit begins (instead of an invalid epoch timestamp) Assign Hardware •‘Register Hardware’ feature when no unassigned hardware is available for assignment to a location. After registering a new sensor, the user is able to select it from the list of available unassigned hardware. 3.4.135 06/05/2025 Ground Truth - Threshold Count Audit •‘End counting’ button properly displayed in the audit count screen Sensor Properties •BlueFox-PSQ firmware shown as white labeled firmware name •When sensor recording time has elapsed but the property in the calibration system has not been changed to null, recording is shown as disabled allowing the user to enable (extend) recording. 3.4.133 05/23/2025 General •Support for older versions of iOS Ground Truth - Threshold Count •‘Start counting’ button is properly displayed after ‘Proceed to the threshold’ is enabled 3.4.132 05/22/2025 General •Footer menu replaced with floating action buttons to prevent obscuring list content Login •Cluster selection popover menu replaced with a list Sensor Locations •Removed assign collector from list slide feature to improve loading performance Distance Calibration •Improved formatting to prevent antenna title descriptions from being cropped •Improved count value input and slider interaction Calibration Applications •Improved manual calibration layout and increased font sizes Ground Truth Collection •Top row of the main menu of the sensor status page is no longer visible after creating a new threshold •Improved create calibration job layout 3.4.131 05/21/2025 Distance Calibration -New formulas for power calculation used for external omni-directional, external directional, external dome, and internal antenna types Headcount Snapshots -Introductory instructions lists count requirement of at least 20 and suggestion to collect at low and high occupancy/traffic levels 3.3.0 04/16/2025 Installer Role •Access assigned Spaces or Sensor locations •Create and manage sensor locations •Collect Ground Truth •Calibrate sensor locations •Create and manage spaces Sensor Location •Assign sensor to a location when without hardware action •Replace sensor hardware action Spaces •Create parent spaces as well as embedded spaces and sensor locations •Space embedded object list will reload after viewing a selected sensor location 3.2.2 02/06/2025 Installer Role •Access assigned Spaces or Sensor locations •Create and manage sensor locations •Collect Ground Truth •Calibrate sensor locations •Create and manage spaces Sensor Location •Assign sensor to a location when without hardware action •Replace sensor hardware action Spaces •Create parent spaces as well as embedded spaces and sensor locations •Space embedded object list will reload after viewing a selected sensor location 3.2.1 01/14/2025 Alert Settings •Allows editing of sensor location alert settings Authentication •Set password feature accessible through “Forgot password” •Various login page layout changes Configure Wi-Fi •Added an additional “Set password for selected network” button to the SSID page to re-prompt password input Threshold Audits •Removed 15 minute audit duration cutoff. Auditors must now manually end counting. •Allows for audit durations of any length 3.1.14 10/08/2024 Alert Settings •Allows editing of sensor location alert settings Authentication •Set password feature accessible through “Forgot password” •Various login page layout changes Configure Wi-Fi •Added an additional “Set password for selected network” button to the SSID page to re-prompt password input Threshold Audits •Removed 15 minute audit duration cutoff. Auditors must now manually end counting. •Allows for audit durations of any length 3.1.13 08/27/2024 Threshold Count Audits •Accuracy is calculated with existing counts at the conclusion of the audit collection period allowing for thresholds to be left uncounted •Ground truth collector threshold counts made outside of the audit collection period are discarded and not included in the location count total. Counts made within the period are retained and included in the location total •Added a “Recheck thresholds for counts” button which recalculates the accuracy using any newly available ground truth collector counts •Added additional audit process information on the startup •Sensor visit count is aggregated over 15 minutes •Bugfix: Location without space loading issue Audit Report •Shows the target sensor location’s name, path, MAC address, and selected threshold if applicable Headcount Snapshots •Allows multiple input types for the head counter (typing, + buttons) Threshold Info •Users can now claim a threshold from the Threshold Info page 3.1.8 05/04/2024 Threshold Count Audits •Accuracy is calculated with existing counts at the conclusion of the audit collection period allowing for thresholds to be left uncounted •Ground truth collector threshold counts made outside of the audit collection period are discarded and not included in the location count total. Counts made within the period are retained and included in the location total •Added a “Recheck thresholds for counts” button which recalculates the accuracy using any newly available ground truth collector counts •Added additional audit process information on the startup •Sensor visit count is aggregated over 15 minutes •Bugfix: Location without space loading issue Audit Report •Shows the target sensor location’s name, path, MAC address, and selected threshold if applicable Headcount Snapshots •Allows multiple input types for the head counter (typing, + buttons) Threshold Info •Users can now claim a threshold from the Threshold Info page 3.1.7 05/03/2024 Threshold Count Audits •Accuracy is calculated with existing counts at the conclusion of the audit collection period allowing for thresholds to be left uncounted •Ground truth collector threshold counts made outside of the audit collection period are discarded and not included in the location count total. Counts made within the period are retained and included in the location total •Added a “Recheck thresholds for counts” button which recalculates the accuracy using any newly available ground truth collector counts •Added additional audit process information on the startup •Sensor visit count is aggregated over 15 minutes •Bugfix: Location without space loading issue Audit Report •Shows the target sensor location’s name, path, MAC address, and selected threshold if applicable Headcount Snapshots •Allows multiple input types for the head counter (typing, + buttons) Threshold Info •Users can now claim a threshold from the Threshold Info page 3.1.6 05/02/2024 Threshold Count Audits •Accuracy is calculated with existing counts at the conclusion of the audit collection period allowing for thresholds to be left uncounted •Ground truth collector threshold counts made outside of the audit collection period are discarded and not included in the location count total. Counts made within the period are retained and included in the location total •Added a “Recheck thresholds for counts” button which recalculates the accuracy using any newly available ground truth collector counts •Added additional audit process information on the startup •Sensor visit count is aggregated over 15 minutes Audit Report •Shows the target sensor location’s name, path, MAC address, and selected threshold if applicable Headcount Snapshots •Allows multiple input types for the head counter (typing, + buttons) Threshold Info •Users can now claim a threshold from the Threshold Info page 3.1.5 05/01/2024 Threshold Count Audits •Accuracy is calculated with existing counts at the conclusion of the audit collection period allowing for thresholds to be left uncounted •Ground truth collector threshold counts made outside of the audit collection period are discarded and not included in the location count total. Counts made within the period are retained and included in the location total •Added a “Recheck thresholds for counts” button which recalculates the accuracy using any newly available ground truth collector counts •Added additional audit process information on the startup Audit Report •Shows the target sensor location’s name, path, MAC address, and selected threshold if applicable Headcount Snapshots •Allows multiple input types for the head counter (typing, + buttons) Threshold Info •Users can now claim a threshold from the Threshold Info page 3.1.4 04/28/2024 Range Detection Calibration • A new calibration method which utilizes the detected power values of a mobile device connected to a BlueZoo sensor to determine the inner detection zone. Distance Calibration • A new calibration method which calculates its power values based on the provided distance of the sensor from the inner detection zone. 3.1.0 01/31/2024 1. Recent Events displays Calibration Jobs, Headcount Snapshots, and Threshold Counts. 2. Improved Wi-Fi configurator 3. Calibration Jobs: Start jobs and apply their recommended calibration candidate 4. Calibration Applications: View and edit applied calibrations or create a manual calibration 5. Ground Truth Audits: Verify accuracy by comparing a sensor's visitor count with collected ground truth 6. Edit a location's timezone 7. New help descriptions throughout each page and location tab 3.0.4 06/21/2023 • This software release expands the BlueFox Ground Truth Collection app to include functionality for setting up and reconfiguring BlueZoo sensors. With this release, the product name transitions to BlueZoo Foot Traffic Analytics. BlueZoo, Inc acquired the BlueFox technology in 2020. • For technical support, documentation, and answers to frequently asked questions, visit support.bluezoo.io. 2.1.0 12/13/2022 -Patch for online/offline status display issue. The page should now properly be hidden at load time while displaying a loading dialog. -Reload button for the sensor locations page and sensor location status page. Pulling down on these pages will still refresh the page as before. -Recording status has changed and shows three states: --Recording - Sensor is online and recording is enabled (shown in green) --Recording Enabled - Sensor is offline and recording is enabled (shown in green) --Recording Disabled (shown in red) -Splash screen fix. Long vertical screens caused the BF logo image to stretch. The logo should now be fixed to the middle of the screen. 1.1.6 07/16/2022 Ground Truth Collector assignment improvements. Performance enhancements for Users and Sensor Locations pages. 1.1.5 06/27/2022 v1.1.4 Beta release of BlueZoo's Ground Truth Collection app. Performance enhancements for Home, Spaces, and Groups. 1.1.4 06/25/2022 Lists and sensor information can be refreshed by pulling down until reloading commences. 1.1.3 06/23/2022 Explores sensor locations through spaces created in the BlueZoo dashboard. 1.1.2 06/21/2022 Patch for space loading 1.1.1 06/21/2022
Previous Versions
Here you can find the changelog of BlueZoo since it was posted on our website on 2023-07-10 20:04:41.
The latest version is 3.4.139 and it was updated on 2026-06-27 07:20:56. See below the changes in each version.
BlueZoo version 3.4.139
Updated At: 2026-06-27
Changes: Version History General
-Status bar safe area fix 3.4.139 12/31/2025 Range detection
•Standard computation method set as Karpov
•Allows the suggested calibration to optionally be edited before being applied
Distance calibration
•Additional antenna types added (10dB & 14dB panel antennas)
Audit
•Allows the auditor to manually recheck for sensor visitor counts 3.4.138 12/10/2025 Sensor Hardware Properties
•Added Wi-Fi password visibility toggle
Ground Truth - Threshold Count Audit
• Start countdown timer shows the correct number of seconds remaining during the last minute of wait time before the audit begins (instead of an invalid epoch timestamp)
Assign Hardware
•‘Register Hardware’ feature when no unassigned hardware is available for assignment to a location. After registering a new sensor, the user is able to select it from the list of available unassigned hardware. 3.4.135 06/05/2025 Ground Truth - Threshold Count Audit
•‘End counting’ button properly displayed in the audit count screen
Sensor Properties
•BlueFox-PSQ firmware shown as white labeled firmware name
•When sensor recording time has elapsed but the property in the calibration system has not been changed to null, recording is shown as disabled allowing the user to enable (extend) recording. 3.4.133 05/23/2025 General
•Support for older versions of iOS
Ground Truth - Threshold Count
•‘Start counting’ button is properly displayed after ‘Proceed to the threshold’ is enabled 3.4.132 05/22/2025 General
•Footer menu replaced with floating action buttons to prevent obscuring list content
Login
•Cluster selection popover menu replaced with a list
Sensor Locations
•Removed assign collector from list slide feature to improve loading performance
Distance Calibration
•Improved formatting to prevent antenna title descriptions from being cropped
•Improved count value input and slider interaction
Calibration Applications
•Improved manual calibration layout and increased font sizes
Ground Truth Collection
•Top row of the main menu of the sensor status page is no longer visible after creating a new threshold
•Improved create calibration job layout 3.4.131 05/21/2025 Distance Calibration
-New formulas for power calculation used for external omni-directional, external directional, external dome, and internal antenna types
Headcount Snapshots
-Introductory instructions lists count requirement of at least 20 and suggestion to collect at low and high occupancy/traffic levels 3.3.0 04/16/2025 Installer Role
•Access assigned Spaces or Sensor locations
•Create and manage sensor locations
•Collect Ground Truth
•Calibrate sensor locations
•Create and manage spaces
Sensor Location
•Assign sensor to a location when without hardware action
•Replace sensor hardware action
Spaces
•Create parent spaces as well as embedded spaces and sensor locations
•Space embedded object list will reload after viewing a selected sensor location 3.2.2 02/06/2025 Installer Role
•Access assigned Spaces or Sensor locations
•Create and manage sensor locations
•Collect Ground Truth
•Calibrate sensor locations
•Create and manage spaces
Sensor Location
•Assign sensor to a location when without hardware action
•Replace sensor hardware action
Spaces
•Create parent spaces as well as embedded spaces and sensor locations
•Space embedded object list will reload after viewing a selected sensor location 3.2.1 01/14/2025 Alert Settings
•Allows editing of sensor location alert settings
Authentication
•Set password feature accessible through “Forgot password”
•Various login page layout changes
Configure Wi-Fi
•Added an additional “Set password for selected network” button to the SSID page to re-prompt password input
Threshold Audits
•Removed 15 minute audit duration cutoff. Auditors must now manually end counting.
•Allows for audit durations of any length 3.1.14 10/08/2024 Alert Settings
•Allows editing of sensor location alert settings
Authentication
•Set password feature accessible through “Forgot password”
•Various login page layout changes
Configure Wi-Fi
•Added an additional “Set password for selected network” button to the SSID page to re-prompt password input
Threshold Audits
•Removed 15 minute audit duration cutoff. Auditors must now manually end counting.
•Allows for audit durations of any length 3.1.13 08/27/2024 Threshold Count Audits
•Accuracy is calculated with existing counts at the conclusion of the audit collection period allowing for thresholds to be left uncounted
•Ground truth collector threshold counts made outside of the audit collection period are discarded and not included in the location count total. Counts made within the period are retained and included in the location total
•Added a “Recheck thresholds for counts” button which recalculates the accuracy using any newly available ground truth collector counts
•Added additional audit process information on the startup
•Sensor visit count is aggregated over 15 minutes
•Bugfix: Location without space loading issue
Audit Report
•Shows the target sensor location’s name, path, MAC address, and selected threshold if applicable
Headcount Snapshots
•Allows multiple input types for the head counter (typing, + buttons)
Threshold Info
•Users can now claim a threshold from the Threshold Info page 3.1.8 05/04/2024 Threshold Count Audits
•Accuracy is calculated with existing counts at the conclusion of the audit collection period allowing for thresholds to be left uncounted
•Ground truth collector threshold counts made outside of the audit collection period are discarded and not included in the location count total. Counts made within the period are retained and included in the location total
•Added a “Recheck thresholds for counts” button which recalculates the accuracy using any newly available ground truth collector counts
•Added additional audit process information on the startup
•Sensor visit count is aggregated over 15 minutes
•Bugfix: Location without space loading issue
Audit Report
•Shows the target sensor location’s name, path, MAC address, and selected threshold if applicable
Headcount Snapshots
•Allows multiple input types for the head counter (typing, + buttons)
Threshold Info
•Users can now claim a threshold from the Threshold Info page 3.1.7 05/03/2024 Threshold Count Audits
•Accuracy is calculated with existing counts at the conclusion of the audit collection period allowing for thresholds to be left uncounted
•Ground truth collector threshold counts made outside of the audit collection period are discarded and not included in the location count total. Counts made within the period are retained and included in the location total
•Added a “Recheck thresholds for counts” button which recalculates the accuracy using any newly available ground truth collector counts
•Added additional audit process information on the startup
•Sensor visit count is aggregated over 15 minutes
•Bugfix: Location without space loading issue
Audit Report
•Shows the target sensor location’s name, path, MAC address, and selected threshold if applicable
Headcount Snapshots
•Allows multiple input types for the head counter (typing, + buttons)
Threshold Info
•Users can now claim a threshold from the Threshold Info page 3.1.6 05/02/2024 Threshold Count Audits
•Accuracy is calculated with existing counts at the conclusion of the audit collection period allowing for thresholds to be left uncounted
•Ground truth collector threshold counts made outside of the audit collection period are discarded and not included in the location count total. Counts made within the period are retained and included in the location total
•Added a “Recheck thresholds for counts” button which recalculates the accuracy using any newly available ground truth collector counts
•Added additional audit process information on the startup
•Sensor visit count is aggregated over 15 minutes
Audit Report
•Shows the target sensor location’s name, path, MAC address, and selected threshold if applicable
Headcount Snapshots
•Allows multiple input types for the head counter (typing, + buttons)
Threshold Info
•Users can now claim a threshold from the Threshold Info page 3.1.5 05/01/2024 Threshold Count Audits
•Accuracy is calculated with existing counts at the conclusion of the audit collection period allowing for thresholds to be left uncounted
•Ground truth collector threshold counts made outside of the audit collection period are discarded and not included in the location count total. Counts made within the period are retained and included in the location total
•Added a “Recheck thresholds for counts” button which recalculates the accuracy using any newly available ground truth collector counts
•Added additional audit process information on the startup
Audit Report
•Shows the target sensor location’s name, path, MAC address, and selected threshold if applicable
Headcount Snapshots
•Allows multiple input types for the head counter (typing, + buttons)
Threshold Info
•Users can now claim a threshold from the Threshold Info page 3.1.4 04/28/2024 Range Detection Calibration
• A new calibration method which utilizes the detected power values of a mobile device connected to a BlueZoo sensor to determine the inner detection zone.
Distance Calibration
• A new calibration method which calculates its power values based on the provided distance of the sensor from the inner detection zone. 3.1.0 01/31/2024 1. Recent Events displays Calibration Jobs, Headcount Snapshots, and Threshold Counts.
2. Improved Wi-Fi configurator
3. Calibration Jobs: Start jobs and apply their recommended calibration candidate
4. Calibration Applications: View and edit applied calibrations or create a manual calibration
5. Ground Truth Audits: Verify accuracy by comparing a sensor's visitor count with collected ground truth
6. Edit a location's timezone
7. New help descriptions throughout each page and location tab 3.0.4 06/21/2023 • This software release expands the BlueFox Ground Truth Collection app to include functionality for setting up and reconfiguring BlueZoo sensors. With this release, the product name transitions to BlueZoo Foot Traffic Analytics. BlueZoo, Inc acquired the BlueFox technology in 2020.
• For technical support, documentation, and answers to frequently asked questions, visit support.bluezoo.io. 2.1.0 12/13/2022 -Patch for online/offline status display issue. The page should now properly be hidden at load time while displaying a loading dialog.
-Reload button for the sensor locations page and sensor location status page. Pulling down on these pages will still refresh the page as before.
-Recording status has changed and shows three states:
--Recording - Sensor is online and recording is enabled (shown in green)
--Recording Enabled - Sensor is offline and recording is enabled (shown in green)
--Recording Disabled (shown in red)
-Splash screen fix. Long vertical screens caused the BF logo image to stretch. The logo should now be fixed to the middle of the screen. 1.1.6 07/16/2022 Ground Truth Collector assignment improvements. Performance enhancements for Users and Sensor Locations pages. 1.1.5 06/27/2022 v1.1.4 Beta release of BlueZoo's Ground Truth Collection app. Performance enhancements for Home, Spaces, and Groups. 1.1.4 06/25/2022 Lists and sensor information can be refreshed by pulling down until reloading commences. 1.1.3 06/23/2022 Explores sensor locations through spaces created in the BlueZoo dashboard. 1.1.2 06/21/2022 Patch for space loading 1.1.1 06/21/2022
BlueZoo version 3.4.139
Updated At: 2025-12-31
Changes: General
-Status bar safe area fix
BlueZoo version 3.4.135
Updated At: 2025-06-05
Changes: Jun 5, 2025
Version 3.4.135
Sensor Hardware Properties
•Added Wi-Fi password visibility toggle
Ground Truth - Threshold Count Audit
• Start countdown timer shows the correct number of seconds remaining during the last minute of wait time before the audit begins (instead of an invalid epoch timestamp)
Assign Hardware
•‘Register Hardware’ feature when no unassigned hardware is available for assignment to a location. After registering a new sensor, the user is able to select it from the list of available unassigned hardware.
BlueZoo version 3.4.133
Updated At: 2025-05-23
Changes: May 23, 2025
Version 3.4.133
Ground Truth - Threshold Count Audit
•‘End counting’ button properly displayed in the audit count screen
Sensor Properties
•BlueFox-PSQ firmware shown as white labeled firmware name
•When sensor recording time has elapsed but the property in the calibration system has not been changed to null, recording is shown as disabled allowing the user to enable (extend) recording.
BlueZoo version 3.3.0
Updated At: 2025-04-16
Changes: Apr 16, 2025
Version 3.3.0
Distance Calibration
-New formulas for power calculation used for external omni-directional, external directional, external dome, and internal antenna types
Headcount Snapshots
-Introductory instructions lists count requirement of at least 20 and suggestion to collect at low and high occupancy/traffic levels
BlueZoo version 3.2.2
Updated At: 2025-02-06
Changes: Feb 6, 2025
Version 3.2.2
Installer Role
•Access assigned Spaces or Sensor locations
•Create and manage sensor locations
•Collect Ground Truth
•Calibrate sensor locations
•Create and manage spaces
Sensor Location
•Assign sensor to a location when without hardware action
•Replace sensor hardware action
Spaces
•Create parent spaces as well as embedded spaces and sensor locations
•Space embedded object list will reload after viewing a selected sensor location
BlueZoo version 3.1.14
Updated At: 2024-10-08
Changes: Oct 8, 2024
Version 3.1.14
Alert Settings
•Allows editing of sensor location alert settings
Authentication
•Set password feature accessible through “Forgot password”
•Various login page layout changes
Configure Wi-Fi
•Added an additional “Set password for selected network” button to the SSID page to re-prompt password input
Threshold Audits
•Removed 15 minute audit duration cutoff. Auditors must now manually end counting.
•Allows for audit durations of any length
BlueZoo version 3.1.13
Updated At: 2024-08-27
Changes: Aug 27, 2024
Version 3.1.13
Alert Settings
•Allows editing of sensor location alert settings
Authentication
•Set password feature accessible through “Forgot password”
•Various login page layout changes
Configure Wi-Fi
•Added an additional “Set password for selected network” button to the SSID page to re-prompt password input
Threshold Audits
•Removed 15 minute audit duration cutoff. Auditors must now manually end counting.
•Allows for audit durations of any length
BlueZoo version 3.1.8
Updated At: 2024-05-04
Changes: May 4, 2024
Version 3.1.8
Threshold Count Audits
•Accuracy is calculated with existing counts at the conclusion of the audit collection period allowing for thresholds to be left uncounted
•Ground truth collector threshold counts made outside of the audit collection period are discarded and not included in the location count total. Counts made within the period are retained and included in the location total
•Added a “Recheck thresholds for counts” button which recalculates the accuracy using any newly available ground truth collector counts
•Added additional audit process information on the startup
•Sensor visit count is aggregated over 15 minutes
•Bugfix: Location without space loading issue
Audit Report
•Shows the target sensor location’s name, path, MAC address, and selected threshold if applicable
Headcount Snapshots
•Allows multiple input types for the head counter (typing, + buttons)
Threshold Info
•Users can now claim a threshold from the Threshold Info page
BlueZoo version 3.1.7
Updated At: 2024-05-03
Changes: May 3, 2024
Version 3.1.7
Threshold Count Audits
•Accuracy is calculated with existing counts at the conclusion of the audit collection period allowing for thresholds to be left uncounted
•Ground truth collector threshold counts made outside of the audit collection period are discarded and not included in the location count total. Counts made within the period are retained and included in the location total
•Added a “Recheck thresholds for counts” button which recalculates the accuracy using any newly available ground truth collector counts
•Added additional audit process information on the startup
•Sensor visit count is aggregated over 15 minutes
•Bugfix: Location without space loading issue
Audit Report
•Shows the target sensor location’s name, path, MAC address, and selected threshold if applicable
Headcount Snapshots
•Allows multiple input types for the head counter (typing, + buttons)
Threshold Info
•Users can now claim a threshold from the Threshold Info page
Disclaimer
Official App Store Link
We do not host BlueZoo on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for BlueZoo is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
